xref: /openbmc/linux/arch/m68k/sun3/mmu_emu.c (revision bcc94f9a)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 ** Tablewalk MMU emulator
4 **
5 ** by Toshiyasu Morita
6 **
7 ** Started 1/16/98 @ 2:22 am
8 */
9 
10 #include <linux/init.h>
11 #include <linux/mman.h>
12 #include <linux/mm.h>
13 #include <linux/kernel.h>
14 #include <linux/ptrace.h>
15 #include <linux/delay.h>
16 #include <linux/memblock.h>
17 #include <linux/bitops.h>
18 #include <linux/module.h>
19 #include <linux/sched/mm.h>
20 
21 #include <asm/setup.h>
22 #include <asm/traps.h>
23 #include <linux/uaccess.h>
24 #include <asm/page.h>
25 #include <asm/sun3mmu.h>
26 #include <asm/oplib.h>
27 #include <asm/mmu_context.h>
28 #include <asm/dvma.h>
29 
30 
31 #undef DEBUG_MMU_EMU
32 #define DEBUG_PROM_MAPS
33 
34 /*
35 ** Defines
36 */
37 
38 #define CONTEXTS_NUM		8
39 #define SEGMAPS_PER_CONTEXT_NUM 2048
40 #define PAGES_PER_SEGMENT	16
41 #define PMEGS_NUM		256
42 #define PMEG_MASK		0xFF
43 
44 /*
45 ** Globals
46 */
47 
48 unsigned long m68k_vmalloc_end;
49 EXPORT_SYMBOL(m68k_vmalloc_end);
50 
51 unsigned long pmeg_vaddr[PMEGS_NUM];
52 unsigned char pmeg_alloc[PMEGS_NUM];
53 unsigned char pmeg_ctx[PMEGS_NUM];
54 
55 /* pointers to the mm structs for each task in each
56    context. 0xffffffff is a marker for kernel context */
57 static struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
58     [0] = (struct mm_struct *)0xffffffff
59 };
60 
61 /* has this context been mmdrop'd? */
62 static unsigned char ctx_avail = CONTEXTS_NUM-1;
63 
64 /* array of pages to be marked off for the rom when we do mem_init later */
65 /* 256 pages lets the rom take up to 2mb of physical ram..  I really
66    hope it never wants mote than that. */
67 unsigned long rom_pages[256];
68 
69 /* Print a PTE value in symbolic form. For debugging. */
print_pte(pte_t pte)70 void print_pte (pte_t pte)
71 {
72 #if 0
73 	/* Verbose version. */
74 	unsigned long val = pte_val (pte);
75 	pr_cont(" pte=%lx [addr=%lx",
76 		val, (val & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT);
77 	if (val & SUN3_PAGE_VALID)	pr_cont(" valid");
78 	if (val & SUN3_PAGE_WRITEABLE)	pr_cont(" write");
79 	if (val & SUN3_PAGE_SYSTEM)	pr_cont(" sys");
80 	if (val & SUN3_PAGE_NOCACHE)	pr_cont(" nocache");
81 	if (val & SUN3_PAGE_ACCESSED)	pr_cont(" accessed");
82 	if (val & SUN3_PAGE_MODIFIED)	pr_cont(" modified");
83 	switch (val & SUN3_PAGE_TYPE_MASK) {
84 		case SUN3_PAGE_TYPE_MEMORY: pr_cont(" memory"); break;
85 		case SUN3_PAGE_TYPE_IO:     pr_cont(" io");     break;
86 		case SUN3_PAGE_TYPE_VME16:  pr_cont(" vme16");  break;
87 		case SUN3_PAGE_TYPE_VME32:  pr_cont(" vme32");  break;
88 	}
89 	pr_cont("]\n");
90 #else
91 	/* Terse version. More likely to fit on a line. */
92 	unsigned long val = pte_val (pte);
93 	char flags[7], *type;
94 
95 	flags[0] = (val & SUN3_PAGE_VALID)     ? 'v' : '-';
96 	flags[1] = (val & SUN3_PAGE_WRITEABLE) ? 'w' : '-';
97 	flags[2] = (val & SUN3_PAGE_SYSTEM)    ? 's' : '-';
98 	flags[3] = (val & SUN3_PAGE_NOCACHE)   ? 'x' : '-';
99 	flags[4] = (val & SUN3_PAGE_ACCESSED)  ? 'a' : '-';
100 	flags[5] = (val & SUN3_PAGE_MODIFIED)  ? 'm' : '-';
101 	flags[6] = '\0';
102 
103 	switch (val & SUN3_PAGE_TYPE_MASK) {
104 		case SUN3_PAGE_TYPE_MEMORY: type = "memory"; break;
105 		case SUN3_PAGE_TYPE_IO:     type = "io"    ; break;
106 		case SUN3_PAGE_TYPE_VME16:  type = "vme16" ; break;
107 		case SUN3_PAGE_TYPE_VME32:  type = "vme32" ; break;
108 		default: type = "unknown?"; break;
109 	}
110 
111 	pr_cont(" pte=%08lx [%07lx %s %s]\n",
112 		val, (val & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT, flags, type);
113 #endif
114 }
115 
116 /* Print the PTE value for a given virtual address. For debugging. */
print_pte_vaddr(unsigned long vaddr)117 void print_pte_vaddr (unsigned long vaddr)
118 {
119 	pr_cont(" vaddr=%lx [%02lx]", vaddr, sun3_get_segmap (vaddr));
120 	print_pte (__pte (sun3_get_pte (vaddr)));
121 }
122 
123 /*
124  * Initialise the MMU emulator.
125  */
mmu_emu_init(unsigned long bootmem_end)126 void __init mmu_emu_init(unsigned long bootmem_end)
127 {
128 	unsigned long seg, num;
129 	int i,j;
130 
131 	memset(rom_pages, 0, sizeof(rom_pages));
132 	memset(pmeg_vaddr, 0, sizeof(pmeg_vaddr));
133 	memset(pmeg_alloc, 0, sizeof(pmeg_alloc));
134 	memset(pmeg_ctx, 0, sizeof(pmeg_ctx));
135 
136 	/* pmeg align the end of bootmem, adding another pmeg,
137 	 * later bootmem allocations will likely need it */
138 	bootmem_end = (bootmem_end + (2 * SUN3_PMEG_SIZE)) & ~SUN3_PMEG_MASK;
139 
140 	/* mark all of the pmegs used thus far as reserved */
141 	for (i=0; i < __pa(bootmem_end) / SUN3_PMEG_SIZE ; ++i)
142 		pmeg_alloc[i] = 2;
143 
144 
145 	/* I'm thinking that most of the top pmeg's are going to be
146 	   used for something, and we probably shouldn't risk it */
147 	for(num = 0xf0; num <= 0xff; num++)
148 		pmeg_alloc[num] = 2;
149 
150 	/* liberate all existing mappings in the rest of kernel space */
151 	for(seg = bootmem_end; seg < 0x0f800000; seg += SUN3_PMEG_SIZE) {
152 		i = sun3_get_segmap(seg);
153 
154 		if(!pmeg_alloc[i]) {
155 #ifdef DEBUG_MMU_EMU
156 			pr_info("freed:");
157 			print_pte_vaddr (seg);
158 #endif
159 			sun3_put_segmap(seg, SUN3_INVALID_PMEG);
160 		}
161 	}
162 
163 	j = 0;
164 	for (num=0, seg=0x0F800000; seg<0x10000000; seg+=16*PAGE_SIZE) {
165 		if (sun3_get_segmap (seg) != SUN3_INVALID_PMEG) {
166 #ifdef DEBUG_PROM_MAPS
167 			for(i = 0; i < 16; i++) {
168 				pr_info("mapped:");
169 				print_pte_vaddr (seg + (i*PAGE_SIZE));
170 				break;
171 			}
172 #endif
173 			// the lowest mapping here is the end of our
174 			// vmalloc region
175 			if (!m68k_vmalloc_end)
176 				m68k_vmalloc_end = seg;
177 
178 			// mark the segmap alloc'd, and reserve any
179 			// of the first 0xbff pages the hardware is
180 			// already using...  does any sun3 support > 24mb?
181 			pmeg_alloc[sun3_get_segmap(seg)] = 2;
182 		}
183 	}
184 
185 	dvma_init();
186 
187 
188 	/* blank everything below the kernel, and we've got the base
189 	   mapping to start all the contexts off with... */
190 	for(seg = 0; seg < PAGE_OFFSET; seg += SUN3_PMEG_SIZE)
191 		sun3_put_segmap(seg, SUN3_INVALID_PMEG);
192 
193 	set_fc(3);
194 	for(seg = 0; seg < 0x10000000; seg += SUN3_PMEG_SIZE) {
195 		i = sun3_get_segmap(seg);
196 		for(j = 1; j < CONTEXTS_NUM; j++)
197 			(*(romvec->pv_setctxt))(j, (void *)seg, i);
198 	}
199 	set_fc(USER_DATA);
200 }
201 
202 /* erase the mappings for a dead context.  Uses the pg_dir for hints
203    as the pmeg tables proved somewhat unreliable, and unmapping all of
204    TASK_SIZE was much slower and no more stable. */
205 /* todo: find a better way to keep track of the pmegs used by a
206    context for when they're cleared */
clear_context(unsigned long context)207 void clear_context(unsigned long context)
208 {
209      unsigned char oldctx;
210      unsigned long i;
211 
212      if(context) {
213 	     if(!ctx_alloc[context])
214 		     panic("%s: context not allocated\n", __func__);
215 
216 	     ctx_alloc[context]->context = SUN3_INVALID_CONTEXT;
217 	     ctx_alloc[context] = (struct mm_struct *)0;
218 	     ctx_avail++;
219      }
220 
221      oldctx = sun3_get_context();
222 
223      sun3_put_context(context);
224 
225      for(i = 0; i < SUN3_INVALID_PMEG; i++) {
226 	     if((pmeg_ctx[i] == context) && (pmeg_alloc[i] == 1)) {
227 		     sun3_put_segmap(pmeg_vaddr[i], SUN3_INVALID_PMEG);
228 		     pmeg_ctx[i] = 0;
229 		     pmeg_alloc[i] = 0;
230 		     pmeg_vaddr[i] = 0;
231 	     }
232      }
233 
234      sun3_put_context(oldctx);
235 }
236 
237 /* gets an empty context.  if full, kills the next context listed to
238    die first */
239 /* This context invalidation scheme is, well, totally arbitrary, I'm
240    sure it could be much more intelligent...  but it gets the job done
241    for now without much overhead in making it's decision. */
242 /* todo: come up with optimized scheme for flushing contexts */
get_free_context(struct mm_struct * mm)243 unsigned long get_free_context(struct mm_struct *mm)
244 {
245 	unsigned long new = 1;
246 	static unsigned char next_to_die = 1;
247 
248 	if(!ctx_avail) {
249 		/* kill someone to get our context */
250 		new = next_to_die;
251 		clear_context(new);
252 		next_to_die = (next_to_die + 1) & 0x7;
253 		if(!next_to_die)
254 			next_to_die++;
255 	} else {
256 		while(new < CONTEXTS_NUM) {
257 			if(ctx_alloc[new])
258 				new++;
259 			else
260 				break;
261 		}
262 		// check to make sure one was really free...
263 		if(new == CONTEXTS_NUM)
264 			panic("%s: failed to find free context", __func__);
265 	}
266 
267 	ctx_alloc[new] = mm;
268 	ctx_avail--;
269 
270 	return new;
271 }
272 
273 /*
274  * Dynamically select a `spare' PMEG and use it to map virtual `vaddr' in
275  * `context'. Maintain internal PMEG management structures. This doesn't
276  * actually map the physical address, but does clear the old mappings.
277  */
278 //todo: better allocation scheme? but is extra complexity worthwhile?
279 //todo: only clear old entries if necessary? how to tell?
280 
mmu_emu_map_pmeg(int context,int vaddr)281 inline void mmu_emu_map_pmeg (int context, int vaddr)
282 {
283 	static unsigned char curr_pmeg = 128;
284 	int i;
285 
286 	/* Round address to PMEG boundary. */
287 	vaddr &= ~SUN3_PMEG_MASK;
288 
289 	/* Find a spare one. */
290 	while (pmeg_alloc[curr_pmeg] == 2)
291 		++curr_pmeg;
292 
293 
294 #ifdef DEBUG_MMU_EMU
295 	pr_info("mmu_emu_map_pmeg: pmeg %x to context %d vaddr %x\n",
296 		curr_pmeg, context, vaddr);
297 #endif
298 
299 	/* Invalidate old mapping for the pmeg, if any */
300 	if (pmeg_alloc[curr_pmeg] == 1) {
301 		sun3_put_context(pmeg_ctx[curr_pmeg]);
302 		sun3_put_segmap (pmeg_vaddr[curr_pmeg], SUN3_INVALID_PMEG);
303 		sun3_put_context(context);
304 	}
305 
306 	/* Update PMEG management structures. */
307 	// don't take pmeg's away from the kernel...
308 	if(vaddr >= PAGE_OFFSET) {
309 		/* map kernel pmegs into all contexts */
310 		unsigned char i;
311 
312 		for(i = 0; i < CONTEXTS_NUM; i++) {
313 			sun3_put_context(i);
314 			sun3_put_segmap (vaddr, curr_pmeg);
315 		}
316 		sun3_put_context(context);
317 		pmeg_alloc[curr_pmeg] = 2;
318 		pmeg_ctx[curr_pmeg] = 0;
319 
320 	}
321 	else {
322 		pmeg_alloc[curr_pmeg] = 1;
323 		pmeg_ctx[curr_pmeg] = context;
324 		sun3_put_segmap (vaddr, curr_pmeg);
325 
326 	}
327 	pmeg_vaddr[curr_pmeg] = vaddr;
328 
329 	/* Set hardware mapping and clear the old PTE entries. */
330 	for (i=0; i<SUN3_PMEG_SIZE; i+=SUN3_PTE_SIZE)
331 		sun3_put_pte (vaddr + i, SUN3_PAGE_SYSTEM);
332 
333 	/* Consider a different one next time. */
334 	++curr_pmeg;
335 }
336 
337 /*
338  * Handle a pagefault at virtual address `vaddr'; check if there should be a
339  * page there (specifically, whether the software pagetables indicate that
340  * there is). This is necessary due to the limited size of the second-level
341  * Sun3 hardware pagetables (256 groups of 16 pages). If there should be a
342  * mapping present, we select a `spare' PMEG and use it to create a mapping.
343  * `read_flag' is nonzero for a read fault; zero for a write. Returns nonzero
344  * if we successfully handled the fault.
345  */
346 //todo: should we bump minor pagefault counter? if so, here or in caller?
347 //todo: possibly inline this into bus_error030 in <asm/buserror.h> ?
348 
349 // kernel_fault is set when a kernel page couldn't be demand mapped,
350 // and forces another try using the kernel page table.  basically a
351 // hack so that vmalloc would work correctly.
352 
mmu_emu_handle_fault(unsigned long vaddr,int read_flag,int kernel_fault)353 int mmu_emu_handle_fault (unsigned long vaddr, int read_flag, int kernel_fault)
354 {
355 	unsigned long segment, offset;
356 	unsigned char context;
357 	pte_t *pte;
358 	pgd_t * crp;
359 
360 	if(current->mm == NULL) {
361 		crp = swapper_pg_dir;
362 		context = 0;
363 	} else {
364 		context = current->mm->context;
365 		if(kernel_fault)
366 			crp = swapper_pg_dir;
367 		else
368 			crp = current->mm->pgd;
369 	}
370 
371 #ifdef DEBUG_MMU_EMU
372 	pr_info("%s: vaddr=%lx type=%s crp=%p\n", __func__, vaddr,
373 		read_flag ? "read" : "write", crp);
374 #endif
375 
376 	segment = (vaddr >> SUN3_PMEG_SIZE_BITS) & 0x7FF;
377 	offset  = (vaddr >> SUN3_PTE_SIZE_BITS) & 0xF;
378 
379 #ifdef DEBUG_MMU_EMU
380 	pr_info("%s: segment=%lx offset=%lx\n", __func__, segment, offset);
381 #endif
382 
383 	pte = (pte_t *) pgd_val (*(crp + segment));
384 
385 //todo: next line should check for valid pmd properly.
386 	if (!pte) {
387 //                pr_info("mmu_emu_handle_fault: invalid pmd\n");
388                 return 0;
389         }
390 
391 	pte = (pte_t *) __va ((unsigned long)(pte + offset));
392 
393 	/* Make sure this is a valid page */
394 	if (!(pte_val (*pte) & SUN3_PAGE_VALID))
395 		return 0;
396 
397 	/* Make sure there's a pmeg allocated for the page */
398 	if (sun3_get_segmap (vaddr&~SUN3_PMEG_MASK) == SUN3_INVALID_PMEG)
399 		mmu_emu_map_pmeg (context, vaddr);
400 
401 	/* Write the pte value to hardware MMU */
402 	sun3_put_pte (vaddr&PAGE_MASK, pte_val (*pte));
403 
404 	/* Update software copy of the pte value */
405 // I'm not sure this is necessary. If this is required, we ought to simply
406 // copy this out when we reuse the PMEG or at some other convenient time.
407 // Doing it here is fairly meaningless, anyway, as we only know about the
408 // first access to a given page. --m
409 	if (!read_flag) {
410 		if (pte_val (*pte) & SUN3_PAGE_WRITEABLE)
411 			pte_val (*pte) |= (SUN3_PAGE_ACCESSED
412 					   | SUN3_PAGE_MODIFIED);
413 		else
414 			return 0;	/* Write-protect error. */
415 	} else
416 		pte_val (*pte) |= SUN3_PAGE_ACCESSED;
417 
418 #ifdef DEBUG_MMU_EMU
419 	pr_info("seg:%ld crp:%p ->", get_fs().seg, crp);
420 	print_pte_vaddr (vaddr);
421 	pr_cont("\n");
422 #endif
423 
424 	return 1;
425 }
426