1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Marvell Berlin SATA PHY driver
4 *
5 * Copyright (C) 2014 Marvell Technology Group Ltd.
6 *
7 * Antoine Ténart <antoine.tenart@free-electrons.com>
8 */
9
10 #include <linux/clk.h>
11 #include <linux/module.h>
12 #include <linux/of.h>
13 #include <linux/phy/phy.h>
14 #include <linux/io.h>
15 #include <linux/platform_device.h>
16
17 #define HOST_VSA_ADDR 0x0
18 #define HOST_VSA_DATA 0x4
19 #define PORT_SCR_CTL 0x2c
20 #define PORT_VSR_ADDR 0x78
21 #define PORT_VSR_DATA 0x7c
22
23 #define CONTROL_REGISTER 0x0
24 #define MBUS_SIZE_CONTROL 0x4
25
26 #define POWER_DOWN_PHY0 BIT(6)
27 #define POWER_DOWN_PHY1 BIT(14)
28 #define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16)
29 #define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19)
30
31 #define BG2_PHY_BASE 0x080
32 #define BG2Q_PHY_BASE 0x200
33
34 /* register 0x01 */
35 #define REF_FREF_SEL_25 BIT(0)
36 #define PHY_BERLIN_MODE_SATA (0x0 << 5)
37
38 /* register 0x02 */
39 #define USE_MAX_PLL_RATE BIT(12)
40
41 /* register 0x23 */
42 #define DATA_BIT_WIDTH_10 (0x0 << 10)
43 #define DATA_BIT_WIDTH_20 (0x1 << 10)
44 #define DATA_BIT_WIDTH_40 (0x2 << 10)
45
46 /* register 0x25 */
47 #define PHY_GEN_MAX_1_5 (0x0 << 10)
48 #define PHY_GEN_MAX_3_0 (0x1 << 10)
49 #define PHY_GEN_MAX_6_0 (0x2 << 10)
50
51 struct phy_berlin_desc {
52 struct phy *phy;
53 u32 power_bit;
54 unsigned index;
55 };
56
57 struct phy_berlin_priv {
58 void __iomem *base;
59 spinlock_t lock;
60 struct clk *clk;
61 struct phy_berlin_desc **phys;
62 unsigned nphys;
63 u32 phy_base;
64 };
65
phy_berlin_sata_reg_setbits(void __iomem * ctrl_reg,u32 phy_base,u32 reg,u32 mask,u32 val)66 static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg,
67 u32 phy_base, u32 reg, u32 mask, u32 val)
68 {
69 u32 regval;
70
71 /* select register */
72 writel(phy_base + reg, ctrl_reg + PORT_VSR_ADDR);
73
74 /* set bits */
75 regval = readl(ctrl_reg + PORT_VSR_DATA);
76 regval &= ~mask;
77 regval |= val;
78 writel(regval, ctrl_reg + PORT_VSR_DATA);
79 }
80
phy_berlin_sata_power_on(struct phy * phy)81 static int phy_berlin_sata_power_on(struct phy *phy)
82 {
83 struct phy_berlin_desc *desc = phy_get_drvdata(phy);
84 struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
85 void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80);
86 u32 regval;
87
88 clk_prepare_enable(priv->clk);
89
90 spin_lock(&priv->lock);
91
92 /* Power on PHY */
93 writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
94 regval = readl(priv->base + HOST_VSA_DATA);
95 regval &= ~desc->power_bit;
96 writel(regval, priv->base + HOST_VSA_DATA);
97
98 /* Configure MBus */
99 writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR);
100 regval = readl(priv->base + HOST_VSA_DATA);
101 regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128;
102 writel(regval, priv->base + HOST_VSA_DATA);
103
104 /* set PHY mode and ref freq to 25 MHz */
105 phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x01,
106 0x00ff,
107 REF_FREF_SEL_25 | PHY_BERLIN_MODE_SATA);
108
109 /* set PHY up to 6 Gbps */
110 phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x25,
111 0x0c00, PHY_GEN_MAX_6_0);
112
113 /* set 40 bits width */
114 phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x23,
115 0x0c00, DATA_BIT_WIDTH_40);
116
117 /* use max pll rate */
118 phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x02,
119 0x0000, USE_MAX_PLL_RATE);
120
121 /* set Gen3 controller speed */
122 regval = readl(ctrl_reg + PORT_SCR_CTL);
123 regval &= ~GENMASK(7, 4);
124 regval |= 0x30;
125 writel(regval, ctrl_reg + PORT_SCR_CTL);
126
127 spin_unlock(&priv->lock);
128
129 clk_disable_unprepare(priv->clk);
130
131 return 0;
132 }
133
phy_berlin_sata_power_off(struct phy * phy)134 static int phy_berlin_sata_power_off(struct phy *phy)
135 {
136 struct phy_berlin_desc *desc = phy_get_drvdata(phy);
137 struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
138 u32 regval;
139
140 clk_prepare_enable(priv->clk);
141
142 spin_lock(&priv->lock);
143
144 /* Power down PHY */
145 writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
146 regval = readl(priv->base + HOST_VSA_DATA);
147 regval |= desc->power_bit;
148 writel(regval, priv->base + HOST_VSA_DATA);
149
150 spin_unlock(&priv->lock);
151
152 clk_disable_unprepare(priv->clk);
153
154 return 0;
155 }
156
phy_berlin_sata_phy_xlate(struct device * dev,struct of_phandle_args * args)157 static struct phy *phy_berlin_sata_phy_xlate(struct device *dev,
158 struct of_phandle_args *args)
159 {
160 struct phy_berlin_priv *priv = dev_get_drvdata(dev);
161 int i;
162
163 if (WARN_ON(args->args[0] >= priv->nphys))
164 return ERR_PTR(-ENODEV);
165
166 for (i = 0; i < priv->nphys; i++) {
167 if (priv->phys[i]->index == args->args[0])
168 break;
169 }
170
171 if (i == priv->nphys)
172 return ERR_PTR(-ENODEV);
173
174 return priv->phys[i]->phy;
175 }
176
177 static const struct phy_ops phy_berlin_sata_ops = {
178 .power_on = phy_berlin_sata_power_on,
179 .power_off = phy_berlin_sata_power_off,
180 .owner = THIS_MODULE,
181 };
182
183 static u32 phy_berlin_power_down_bits[] = {
184 POWER_DOWN_PHY0,
185 POWER_DOWN_PHY1,
186 };
187
phy_berlin_sata_probe(struct platform_device * pdev)188 static int phy_berlin_sata_probe(struct platform_device *pdev)
189 {
190 struct device *dev = &pdev->dev;
191 struct device_node *child;
192 struct phy *phy;
193 struct phy_provider *phy_provider;
194 struct phy_berlin_priv *priv;
195 struct resource *res;
196 int ret, i = 0;
197 u32 phy_id;
198
199 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
200 if (!priv)
201 return -ENOMEM;
202
203 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
204 if (!res)
205 return -EINVAL;
206
207 priv->base = devm_ioremap(dev, res->start, resource_size(res));
208 if (!priv->base)
209 return -ENOMEM;
210
211 priv->clk = devm_clk_get(dev, NULL);
212 if (IS_ERR(priv->clk))
213 return PTR_ERR(priv->clk);
214
215 priv->nphys = of_get_child_count(dev->of_node);
216 if (priv->nphys == 0)
217 return -ENODEV;
218
219 priv->phys = devm_kcalloc(dev, priv->nphys, sizeof(*priv->phys),
220 GFP_KERNEL);
221 if (!priv->phys)
222 return -ENOMEM;
223
224 if (of_device_is_compatible(dev->of_node, "marvell,berlin2-sata-phy"))
225 priv->phy_base = BG2_PHY_BASE;
226 else
227 priv->phy_base = BG2Q_PHY_BASE;
228
229 dev_set_drvdata(dev, priv);
230 spin_lock_init(&priv->lock);
231
232 for_each_available_child_of_node(dev->of_node, child) {
233 struct phy_berlin_desc *phy_desc;
234
235 if (of_property_read_u32(child, "reg", &phy_id)) {
236 dev_err(dev, "missing reg property in node %pOFn\n",
237 child);
238 ret = -EINVAL;
239 goto put_child;
240 }
241
242 if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) {
243 dev_err(dev, "invalid reg in node %pOFn\n", child);
244 ret = -EINVAL;
245 goto put_child;
246 }
247
248 phy_desc = devm_kzalloc(dev, sizeof(*phy_desc), GFP_KERNEL);
249 if (!phy_desc) {
250 ret = -ENOMEM;
251 goto put_child;
252 }
253
254 phy = devm_phy_create(dev, NULL, &phy_berlin_sata_ops);
255 if (IS_ERR(phy)) {
256 dev_err(dev, "failed to create PHY %d\n", phy_id);
257 ret = PTR_ERR(phy);
258 goto put_child;
259 }
260
261 phy_desc->phy = phy;
262 phy_desc->power_bit = phy_berlin_power_down_bits[phy_id];
263 phy_desc->index = phy_id;
264 phy_set_drvdata(phy, phy_desc);
265
266 priv->phys[i++] = phy_desc;
267
268 /* Make sure the PHY is off */
269 phy_berlin_sata_power_off(phy);
270 }
271
272 phy_provider =
273 devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate);
274 return PTR_ERR_OR_ZERO(phy_provider);
275 put_child:
276 of_node_put(child);
277 return ret;
278 }
279
280 static const struct of_device_id phy_berlin_sata_of_match[] = {
281 { .compatible = "marvell,berlin2-sata-phy" },
282 { .compatible = "marvell,berlin2q-sata-phy" },
283 { },
284 };
285 MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);
286
287 static struct platform_driver phy_berlin_sata_driver = {
288 .probe = phy_berlin_sata_probe,
289 .driver = {
290 .name = "phy-berlin-sata",
291 .of_match_table = phy_berlin_sata_of_match,
292 },
293 };
294 module_platform_driver(phy_berlin_sata_driver);
295
296 MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver");
297 MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>");
298 MODULE_LICENSE("GPL v2");
299