1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* Copyright (C) 2019 ASPEED Technology Inc. */
3 /* Copyright (C) 2019 IBM Corp. */
4 
5 #include <linux/clk.h>
6 #include <linux/delay.h>
7 #include <linux/device.h>
8 #include <linux/io.h>
9 #include <linux/math64.h>
10 #include <linux/mmc/host.h>
11 #include <linux/module.h>
12 #include <linux/of_address.h>
13 #include <linux/of.h>
14 #include <linux/of_platform.h>
15 #include <linux/platform_device.h>
16 #include <linux/spinlock.h>
17 
18 #include "sdhci-pltfm.h"
19 
20 #define ASPEED_SDC_INFO			0x00
21 #define   ASPEED_SDC_S1_MMC8		BIT(25)
22 #define   ASPEED_SDC_S0_MMC8		BIT(24)
23 #define ASPEED_SDC_PHASE		0xf4
24 #define   ASPEED_SDC_S1_PHASE_IN	GENMASK(25, 21)
25 #define   ASPEED_SDC_S0_PHASE_IN	GENMASK(20, 16)
26 #define   ASPEED_SDC_S1_PHASE_OUT	GENMASK(15, 11)
27 #define   ASPEED_SDC_S1_PHASE_IN_EN	BIT(10)
28 #define   ASPEED_SDC_S1_PHASE_OUT_EN	GENMASK(9, 8)
29 #define   ASPEED_SDC_S0_PHASE_OUT	GENMASK(7, 3)
30 #define   ASPEED_SDC_S0_PHASE_IN_EN	BIT(2)
31 #define   ASPEED_SDC_S0_PHASE_OUT_EN	GENMASK(1, 0)
32 #define   ASPEED_SDC_PHASE_MAX		31
33 
34 /* SDIO{10,20} */
35 #define ASPEED_SDC_CAP1_1_8V           (0 * 32 + 26)
36 /* SDIO{14,24} */
37 #define ASPEED_SDC_CAP2_SDR104         (1 * 32 + 1)
38 
39 struct aspeed_sdc {
40 	struct clk *clk;
41 	struct resource *res;
42 
43 	spinlock_t lock;
44 	void __iomem *regs;
45 };
46 
47 struct aspeed_sdhci_tap_param {
48 	bool valid;
49 
50 #define ASPEED_SDHCI_TAP_PARAM_INVERT_CLK	BIT(4)
51 	u8 in;
52 	u8 out;
53 };
54 
55 struct aspeed_sdhci_tap_desc {
56 	u32 tap_mask;
57 	u32 enable_mask;
58 	u8 enable_value;
59 };
60 
61 struct aspeed_sdhci_phase_desc {
62 	struct aspeed_sdhci_tap_desc in;
63 	struct aspeed_sdhci_tap_desc out;
64 };
65 
66 struct aspeed_sdhci_pdata {
67 	unsigned int clk_div_start;
68 	const struct aspeed_sdhci_phase_desc *phase_desc;
69 	size_t nr_phase_descs;
70 };
71 
72 struct aspeed_sdhci {
73 	const struct aspeed_sdhci_pdata *pdata;
74 	struct aspeed_sdc *parent;
75 	u32 width_mask;
76 	struct mmc_clk_phase_map phase_map;
77 	const struct aspeed_sdhci_phase_desc *phase_desc;
78 };
79 
80 /*
81  * The function sets the mirror register for updating
82  * capbilities of the current slot.
83  *
84  *   slot | capability  | caps_reg | mirror_reg
85  *   -----|-------------|----------|------------
86  *     0  | CAP1_1_8V   | SDIO140  |   SDIO10
87  *     0  | CAP2_SDR104 | SDIO144  |   SDIO14
88  *     1  | CAP1_1_8V   | SDIO240  |   SDIO20
89  *     1  | CAP2_SDR104 | SDIO244  |   SDIO24
90  */
aspeed_sdc_set_slot_capability(struct sdhci_host * host,struct aspeed_sdc * sdc,int capability,bool enable,u8 slot)91 static void aspeed_sdc_set_slot_capability(struct sdhci_host *host, struct aspeed_sdc *sdc,
92 					   int capability, bool enable, u8 slot)
93 {
94 	u32 mirror_reg_offset;
95 	u32 cap_val;
96 	u8 cap_reg;
97 
98 	if (slot > 1)
99 		return;
100 
101 	cap_reg = capability / 32;
102 	cap_val = sdhci_readl(host, 0x40 + (cap_reg * 4));
103 	if (enable)
104 		cap_val |= BIT(capability % 32);
105 	else
106 		cap_val &= ~BIT(capability % 32);
107 	mirror_reg_offset = ((slot + 1) * 0x10) + (cap_reg * 4);
108 	writel(cap_val, sdc->regs + mirror_reg_offset);
109 }
110 
aspeed_sdc_configure_8bit_mode(struct aspeed_sdc * sdc,struct aspeed_sdhci * sdhci,bool bus8)111 static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc,
112 					   struct aspeed_sdhci *sdhci,
113 					   bool bus8)
114 {
115 	u32 info;
116 
117 	/* Set/clear 8 bit mode */
118 	spin_lock(&sdc->lock);
119 	info = readl(sdc->regs + ASPEED_SDC_INFO);
120 	if (bus8)
121 		info |= sdhci->width_mask;
122 	else
123 		info &= ~sdhci->width_mask;
124 	writel(info, sdc->regs + ASPEED_SDC_INFO);
125 	spin_unlock(&sdc->lock);
126 }
127 
128 static u32
aspeed_sdc_set_phase_tap(const struct aspeed_sdhci_tap_desc * desc,u8 tap,bool enable,u32 reg)129 aspeed_sdc_set_phase_tap(const struct aspeed_sdhci_tap_desc *desc,
130 			 u8 tap, bool enable, u32 reg)
131 {
132 	reg &= ~(desc->enable_mask | desc->tap_mask);
133 	if (enable) {
134 		reg |= tap << __ffs(desc->tap_mask);
135 		reg |= desc->enable_value << __ffs(desc->enable_mask);
136 	}
137 
138 	return reg;
139 }
140 
141 static void
aspeed_sdc_set_phase_taps(struct aspeed_sdc * sdc,const struct aspeed_sdhci_phase_desc * desc,const struct aspeed_sdhci_tap_param * taps)142 aspeed_sdc_set_phase_taps(struct aspeed_sdc *sdc,
143 			  const struct aspeed_sdhci_phase_desc *desc,
144 			  const struct aspeed_sdhci_tap_param *taps)
145 {
146 	u32 reg;
147 
148 	spin_lock(&sdc->lock);
149 	reg = readl(sdc->regs + ASPEED_SDC_PHASE);
150 
151 	reg = aspeed_sdc_set_phase_tap(&desc->in, taps->in, taps->valid, reg);
152 	reg = aspeed_sdc_set_phase_tap(&desc->out, taps->out, taps->valid, reg);
153 
154 	writel(reg, sdc->regs + ASPEED_SDC_PHASE);
155 	spin_unlock(&sdc->lock);
156 }
157 
158 #define PICOSECONDS_PER_SECOND		1000000000000ULL
159 #define ASPEED_SDHCI_NR_TAPS		15
160 /* Measured value with *handwave* environmentals and static loading */
161 #define ASPEED_SDHCI_MAX_TAP_DELAY_PS	1253
aspeed_sdhci_phase_to_tap(struct device * dev,unsigned long rate_hz,int phase_deg)162 static int aspeed_sdhci_phase_to_tap(struct device *dev, unsigned long rate_hz,
163 				     int phase_deg)
164 {
165 	u64 phase_period_ps;
166 	u64 prop_delay_ps;
167 	u64 clk_period_ps;
168 	unsigned int tap;
169 	u8 inverted;
170 
171 	phase_deg %= 360;
172 
173 	if (phase_deg >= 180) {
174 		inverted = ASPEED_SDHCI_TAP_PARAM_INVERT_CLK;
175 		phase_deg -= 180;
176 		dev_dbg(dev,
177 			"Inverting clock to reduce phase correction from %d to %d degrees\n",
178 			phase_deg + 180, phase_deg);
179 	} else {
180 		inverted = 0;
181 	}
182 
183 	prop_delay_ps = ASPEED_SDHCI_MAX_TAP_DELAY_PS / ASPEED_SDHCI_NR_TAPS;
184 	clk_period_ps = div_u64(PICOSECONDS_PER_SECOND, (u64)rate_hz);
185 	phase_period_ps = div_u64((u64)phase_deg * clk_period_ps, 360ULL);
186 
187 	tap = div_u64(phase_period_ps, prop_delay_ps);
188 	if (tap > ASPEED_SDHCI_NR_TAPS) {
189 		dev_dbg(dev,
190 			 "Requested out of range phase tap %d for %d degrees of phase compensation at %luHz, clamping to tap %d\n",
191 			 tap, phase_deg, rate_hz, ASPEED_SDHCI_NR_TAPS);
192 		tap = ASPEED_SDHCI_NR_TAPS;
193 	}
194 
195 	return inverted | tap;
196 }
197 
198 static void
aspeed_sdhci_phases_to_taps(struct device * dev,unsigned long rate,const struct mmc_clk_phase * phases,struct aspeed_sdhci_tap_param * taps)199 aspeed_sdhci_phases_to_taps(struct device *dev, unsigned long rate,
200 			    const struct mmc_clk_phase *phases,
201 			    struct aspeed_sdhci_tap_param *taps)
202 {
203 	taps->valid = phases->valid;
204 
205 	if (!phases->valid)
206 		return;
207 
208 	taps->in = aspeed_sdhci_phase_to_tap(dev, rate, phases->in_deg);
209 	taps->out = aspeed_sdhci_phase_to_tap(dev, rate, phases->out_deg);
210 }
211 
212 static void
aspeed_sdhci_configure_phase(struct sdhci_host * host,unsigned long rate)213 aspeed_sdhci_configure_phase(struct sdhci_host *host, unsigned long rate)
214 {
215 	struct aspeed_sdhci_tap_param _taps = {0}, *taps = &_taps;
216 	struct mmc_clk_phase *params;
217 	struct aspeed_sdhci *sdhci;
218 	struct device *dev;
219 
220 	dev = mmc_dev(host->mmc);
221 	sdhci = sdhci_pltfm_priv(sdhci_priv(host));
222 
223 	if (!sdhci->phase_desc)
224 		return;
225 
226 	params = &sdhci->phase_map.phase[host->timing];
227 	aspeed_sdhci_phases_to_taps(dev, rate, params, taps);
228 	aspeed_sdc_set_phase_taps(sdhci->parent, sdhci->phase_desc, taps);
229 	dev_dbg(dev,
230 		"Using taps [%d, %d] for [%d, %d] degrees of phase correction at %luHz (%d)\n",
231 		taps->in & ASPEED_SDHCI_NR_TAPS,
232 		taps->out & ASPEED_SDHCI_NR_TAPS,
233 		params->in_deg, params->out_deg, rate, host->timing);
234 }
235 
aspeed_sdhci_set_clock(struct sdhci_host * host,unsigned int clock)236 static void aspeed_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
237 {
238 	struct sdhci_pltfm_host *pltfm_host;
239 	unsigned long parent, bus;
240 	struct aspeed_sdhci *sdhci;
241 	int div;
242 	u16 clk;
243 
244 	pltfm_host = sdhci_priv(host);
245 	sdhci = sdhci_pltfm_priv(pltfm_host);
246 
247 	parent = clk_get_rate(pltfm_host->clk);
248 
249 	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
250 
251 	if (clock == 0)
252 		return;
253 
254 	if (WARN_ON(clock > host->max_clk))
255 		clock = host->max_clk;
256 
257 	/*
258 	 * Regarding the AST2600:
259 	 *
260 	 * If (EMMC12C[7:6], EMMC12C[15:8] == 0) then
261 	 *   period of SDCLK = period of SDMCLK.
262 	 *
263 	 * If (EMMC12C[7:6], EMMC12C[15:8] != 0) then
264 	 *   period of SDCLK = period of SDMCLK * 2 * (EMMC12C[7:6], EMMC[15:8])
265 	 *
266 	 * If you keep EMMC12C[7:6] = 0 and EMMC12C[15:8] as one-hot,
267 	 * 0x1/0x2/0x4/etc, you will find it is compatible to AST2400 or AST2500
268 	 *
269 	 * Keep the one-hot behaviour for backwards compatibility except for
270 	 * supporting the value 0 in (EMMC12C[7:6], EMMC12C[15:8]), and capture
271 	 * the 0-value capability in clk_div_start.
272 	 */
273 	for (div = sdhci->pdata->clk_div_start; div < 256; div *= 2) {
274 		bus = parent / div;
275 		if (bus <= clock)
276 			break;
277 	}
278 
279 	div >>= 1;
280 
281 	clk = div << SDHCI_DIVIDER_SHIFT;
282 
283 	aspeed_sdhci_configure_phase(host, bus);
284 
285 	sdhci_enable_clk(host, clk);
286 }
287 
aspeed_sdhci_get_max_clock(struct sdhci_host * host)288 static unsigned int aspeed_sdhci_get_max_clock(struct sdhci_host *host)
289 {
290 	if (host->mmc->f_max)
291 		return host->mmc->f_max;
292 
293 	return sdhci_pltfm_clk_get_max_clock(host);
294 }
295 
aspeed_sdhci_set_bus_width(struct sdhci_host * host,int width)296 static void aspeed_sdhci_set_bus_width(struct sdhci_host *host, int width)
297 {
298 	struct sdhci_pltfm_host *pltfm_priv;
299 	struct aspeed_sdhci *aspeed_sdhci;
300 	struct aspeed_sdc *aspeed_sdc;
301 	u8 ctrl;
302 
303 	pltfm_priv = sdhci_priv(host);
304 	aspeed_sdhci = sdhci_pltfm_priv(pltfm_priv);
305 	aspeed_sdc = aspeed_sdhci->parent;
306 
307 	/* Set/clear 8-bit mode */
308 	aspeed_sdc_configure_8bit_mode(aspeed_sdc, aspeed_sdhci,
309 				       width == MMC_BUS_WIDTH_8);
310 
311 	/* Set/clear 1 or 4 bit mode */
312 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
313 	if (width == MMC_BUS_WIDTH_4)
314 		ctrl |= SDHCI_CTRL_4BITBUS;
315 	else
316 		ctrl &= ~SDHCI_CTRL_4BITBUS;
317 	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
318 }
319 
aspeed_sdhci_readl(struct sdhci_host * host,int reg)320 static u32 aspeed_sdhci_readl(struct sdhci_host *host, int reg)
321 {
322 	u32 val = readl(host->ioaddr + reg);
323 
324 	if (unlikely(reg == SDHCI_PRESENT_STATE) &&
325 	    (host->mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH))
326 		val ^= SDHCI_CARD_PRESENT;
327 
328 	return val;
329 }
330 
331 static const struct sdhci_ops aspeed_sdhci_ops = {
332 	.read_l = aspeed_sdhci_readl,
333 	.set_clock = aspeed_sdhci_set_clock,
334 	.get_max_clock = aspeed_sdhci_get_max_clock,
335 	.set_bus_width = aspeed_sdhci_set_bus_width,
336 	.get_timeout_clock = sdhci_pltfm_clk_get_max_clock,
337 	.reset = sdhci_reset,
338 	.set_uhs_signaling = sdhci_set_uhs_signaling,
339 };
340 
341 static const struct sdhci_pltfm_data aspeed_sdhci_pdata = {
342 	.ops = &aspeed_sdhci_ops,
343 	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
344 };
345 
aspeed_sdhci_calculate_slot(struct aspeed_sdhci * dev,struct resource * res)346 static inline int aspeed_sdhci_calculate_slot(struct aspeed_sdhci *dev,
347 					      struct resource *res)
348 {
349 	resource_size_t delta;
350 
351 	if (!res || resource_type(res) != IORESOURCE_MEM)
352 		return -EINVAL;
353 
354 	if (res->start < dev->parent->res->start)
355 		return -EINVAL;
356 
357 	delta = res->start - dev->parent->res->start;
358 	if (delta & (0x100 - 1))
359 		return -EINVAL;
360 
361 	return (delta / 0x100) - 1;
362 }
363 
aspeed_sdhci_probe(struct platform_device * pdev)364 static int aspeed_sdhci_probe(struct platform_device *pdev)
365 {
366 	const struct aspeed_sdhci_pdata *aspeed_pdata;
367 	struct device_node *np = pdev->dev.of_node;
368 	struct sdhci_pltfm_host *pltfm_host;
369 	struct aspeed_sdhci *dev;
370 	struct sdhci_host *host;
371 	struct resource *res;
372 	int slot;
373 	int ret;
374 
375 	aspeed_pdata = of_device_get_match_data(&pdev->dev);
376 	if (!aspeed_pdata) {
377 		dev_err(&pdev->dev, "Missing platform configuration data\n");
378 		return -EINVAL;
379 	}
380 
381 	host = sdhci_pltfm_init(pdev, &aspeed_sdhci_pdata, sizeof(*dev));
382 	if (IS_ERR(host))
383 		return PTR_ERR(host);
384 
385 	pltfm_host = sdhci_priv(host);
386 	dev = sdhci_pltfm_priv(pltfm_host);
387 	dev->pdata = aspeed_pdata;
388 	dev->parent = dev_get_drvdata(pdev->dev.parent);
389 
390 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
391 	slot = aspeed_sdhci_calculate_slot(dev, res);
392 
393 	if (slot < 0)
394 		return slot;
395 	else if (slot >= 2)
396 		return -EINVAL;
397 
398 	if (slot < dev->pdata->nr_phase_descs) {
399 		dev->phase_desc = &dev->pdata->phase_desc[slot];
400 	} else {
401 		dev_info(&pdev->dev,
402 			 "Phase control not supported for slot %d\n", slot);
403 		dev->phase_desc = NULL;
404 	}
405 
406 	dev->width_mask = !slot ? ASPEED_SDC_S0_MMC8 : ASPEED_SDC_S1_MMC8;
407 
408 	dev_info(&pdev->dev, "Configured for slot %d\n", slot);
409 
410 	sdhci_get_of_property(pdev);
411 
412 	if (of_property_read_bool(np, "mmc-hs200-1_8v") ||
413 	    of_property_read_bool(np, "sd-uhs-sdr104")) {
414 		aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP1_1_8V,
415 					       true, slot);
416 	}
417 
418 	if (of_property_read_bool(np, "sd-uhs-sdr104")) {
419 		aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP2_SDR104,
420 					       true, slot);
421 	}
422 
423 	pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
424 	if (IS_ERR(pltfm_host->clk))
425 		return PTR_ERR(pltfm_host->clk);
426 
427 	ret = clk_prepare_enable(pltfm_host->clk);
428 	if (ret) {
429 		dev_err(&pdev->dev, "Unable to enable SDIO clock\n");
430 		goto err_pltfm_free;
431 	}
432 
433 	ret = mmc_of_parse(host->mmc);
434 	if (ret)
435 		goto err_sdhci_add;
436 
437 	if (dev->phase_desc)
438 		mmc_of_parse_clk_phase(host->mmc, &dev->phase_map);
439 
440 	ret = sdhci_add_host(host);
441 	if (ret)
442 		goto err_sdhci_add;
443 
444 	return 0;
445 
446 err_sdhci_add:
447 	clk_disable_unprepare(pltfm_host->clk);
448 err_pltfm_free:
449 	sdhci_pltfm_free(pdev);
450 	return ret;
451 }
452 
aspeed_sdhci_remove(struct platform_device * pdev)453 static void aspeed_sdhci_remove(struct platform_device *pdev)
454 {
455 	struct sdhci_pltfm_host *pltfm_host;
456 	struct sdhci_host *host;
457 
458 	host = platform_get_drvdata(pdev);
459 	pltfm_host = sdhci_priv(host);
460 
461 	sdhci_remove_host(host, 0);
462 
463 	clk_disable_unprepare(pltfm_host->clk);
464 
465 	sdhci_pltfm_free(pdev);
466 }
467 
468 static const struct aspeed_sdhci_pdata ast2400_sdhci_pdata = {
469 	.clk_div_start = 2,
470 };
471 
472 static const struct aspeed_sdhci_phase_desc ast2600_sdhci_phase[] = {
473 	/* SDHCI/Slot 0 */
474 	[0] = {
475 		.in = {
476 			.tap_mask = ASPEED_SDC_S0_PHASE_IN,
477 			.enable_mask = ASPEED_SDC_S0_PHASE_IN_EN,
478 			.enable_value = 1,
479 		},
480 		.out = {
481 			.tap_mask = ASPEED_SDC_S0_PHASE_OUT,
482 			.enable_mask = ASPEED_SDC_S0_PHASE_OUT_EN,
483 			.enable_value = 3,
484 		},
485 	},
486 	/* SDHCI/Slot 1 */
487 	[1] = {
488 		.in = {
489 			.tap_mask = ASPEED_SDC_S1_PHASE_IN,
490 			.enable_mask = ASPEED_SDC_S1_PHASE_IN_EN,
491 			.enable_value = 1,
492 		},
493 		.out = {
494 			.tap_mask = ASPEED_SDC_S1_PHASE_OUT,
495 			.enable_mask = ASPEED_SDC_S1_PHASE_OUT_EN,
496 			.enable_value = 3,
497 		},
498 	},
499 };
500 
501 static const struct aspeed_sdhci_pdata ast2600_sdhci_pdata = {
502 	.clk_div_start = 1,
503 	.phase_desc = ast2600_sdhci_phase,
504 	.nr_phase_descs = ARRAY_SIZE(ast2600_sdhci_phase),
505 };
506 
507 static const struct of_device_id aspeed_sdhci_of_match[] = {
508 	{ .compatible = "aspeed,ast2400-sdhci", .data = &ast2400_sdhci_pdata, },
509 	{ .compatible = "aspeed,ast2500-sdhci", .data = &ast2400_sdhci_pdata, },
510 	{ .compatible = "aspeed,ast2600-sdhci", .data = &ast2600_sdhci_pdata, },
511 	{ }
512 };
513 MODULE_DEVICE_TABLE(of, aspeed_sdhci_of_match);
514 
515 static struct platform_driver aspeed_sdhci_driver = {
516 	.driver		= {
517 		.name	= "sdhci-aspeed",
518 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
519 		.of_match_table = aspeed_sdhci_of_match,
520 	},
521 	.probe		= aspeed_sdhci_probe,
522 	.remove_new	= aspeed_sdhci_remove,
523 };
524 
aspeed_sdc_probe(struct platform_device * pdev)525 static int aspeed_sdc_probe(struct platform_device *pdev)
526 
527 {
528 	struct device_node *parent, *child;
529 	struct aspeed_sdc *sdc;
530 	int ret;
531 
532 	sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
533 	if (!sdc)
534 		return -ENOMEM;
535 
536 	spin_lock_init(&sdc->lock);
537 
538 	sdc->clk = devm_clk_get(&pdev->dev, NULL);
539 	if (IS_ERR(sdc->clk))
540 		return PTR_ERR(sdc->clk);
541 
542 	ret = clk_prepare_enable(sdc->clk);
543 	if (ret) {
544 		dev_err(&pdev->dev, "Unable to enable SDCLK\n");
545 		return ret;
546 	}
547 
548 	sdc->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &sdc->res);
549 	if (IS_ERR(sdc->regs)) {
550 		ret = PTR_ERR(sdc->regs);
551 		goto err_clk;
552 	}
553 
554 	dev_set_drvdata(&pdev->dev, sdc);
555 
556 	parent = pdev->dev.of_node;
557 	for_each_available_child_of_node(parent, child) {
558 		struct platform_device *cpdev;
559 
560 		cpdev = of_platform_device_create(child, NULL, &pdev->dev);
561 		if (!cpdev) {
562 			of_node_put(child);
563 			ret = -ENODEV;
564 			goto err_clk;
565 		}
566 	}
567 
568 	return 0;
569 
570 err_clk:
571 	clk_disable_unprepare(sdc->clk);
572 	return ret;
573 }
574 
aspeed_sdc_remove(struct platform_device * pdev)575 static void aspeed_sdc_remove(struct platform_device *pdev)
576 {
577 	struct aspeed_sdc *sdc = dev_get_drvdata(&pdev->dev);
578 
579 	clk_disable_unprepare(sdc->clk);
580 }
581 
582 static const struct of_device_id aspeed_sdc_of_match[] = {
583 	{ .compatible = "aspeed,ast2400-sd-controller", },
584 	{ .compatible = "aspeed,ast2500-sd-controller", },
585 	{ .compatible = "aspeed,ast2600-sd-controller", },
586 	{ }
587 };
588 
589 MODULE_DEVICE_TABLE(of, aspeed_sdc_of_match);
590 
591 static struct platform_driver aspeed_sdc_driver = {
592 	.driver		= {
593 		.name	= "sd-controller-aspeed",
594 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
595 		.pm	= &sdhci_pltfm_pmops,
596 		.of_match_table = aspeed_sdc_of_match,
597 	},
598 	.probe		= aspeed_sdc_probe,
599 	.remove_new	= aspeed_sdc_remove,
600 };
601 
602 #if defined(CONFIG_MMC_SDHCI_OF_ASPEED_TEST)
603 #include "sdhci-of-aspeed-test.c"
604 #endif
605 
aspeed_sdc_init(void)606 static int __init aspeed_sdc_init(void)
607 {
608 	int rc;
609 
610 	rc = platform_driver_register(&aspeed_sdhci_driver);
611 	if (rc < 0)
612 		return rc;
613 
614 	rc = platform_driver_register(&aspeed_sdc_driver);
615 	if (rc < 0)
616 		platform_driver_unregister(&aspeed_sdhci_driver);
617 
618 	return rc;
619 }
620 module_init(aspeed_sdc_init);
621 
aspeed_sdc_exit(void)622 static void __exit aspeed_sdc_exit(void)
623 {
624 	platform_driver_unregister(&aspeed_sdc_driver);
625 	platform_driver_unregister(&aspeed_sdhci_driver);
626 }
627 module_exit(aspeed_sdc_exit);
628 
629 MODULE_DESCRIPTION("Driver for the ASPEED SD/SDIO/SDHCI Controllers");
630 MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
631 MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
632 MODULE_LICENSE("GPL");
633