1 // SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1)
2 /*
3 *
4 * Linux Kernel net device interface
5 *
6 * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
7 * --------------------------------------------------------------------
8 *
9 * linux-wlan
10 *
11 * --------------------------------------------------------------------
12 *
13 * Inquiries regarding the linux-wlan Open Source project can be
14 * made directly to:
15 *
16 * AbsoluteValue Systems Inc.
17 * info@linux-wlan.com
18 * http://www.linux-wlan.com
19 *
20 * --------------------------------------------------------------------
21 *
22 * Portions of the development of this software were funded by
23 * Intersil Corporation as part of PRISM(R) chipset product development.
24 *
25 * --------------------------------------------------------------------
26 *
27 * The functions required for a Linux network device are defined here.
28 *
29 * --------------------------------------------------------------------
30 */
31
32 #include <linux/module.h>
33 #include <linux/kernel.h>
34 #include <linux/sched.h>
35 #include <linux/types.h>
36 #include <linux/skbuff.h>
37 #include <linux/slab.h>
38 #include <linux/proc_fs.h>
39 #include <linux/interrupt.h>
40 #include <linux/netdevice.h>
41 #include <linux/kmod.h>
42 #include <linux/if_arp.h>
43 #include <linux/wireless.h>
44 #include <linux/sockios.h>
45 #include <linux/etherdevice.h>
46 #include <linux/if_ether.h>
47 #include <linux/byteorder/generic.h>
48 #include <linux/bitops.h>
49 #include <linux/uaccess.h>
50 #include <asm/byteorder.h>
51
52 #ifdef SIOCETHTOOL
53 #include <linux/ethtool.h>
54 #endif
55
56 #include <net/iw_handler.h>
57 #include <net/net_namespace.h>
58 #include <net/cfg80211.h>
59
60 #include "p80211types.h"
61 #include "p80211hdr.h"
62 #include "p80211conv.h"
63 #include "p80211mgmt.h"
64 #include "p80211msg.h"
65 #include "p80211netdev.h"
66 #include "p80211ioctl.h"
67 #include "p80211req.h"
68 #include "p80211metastruct.h"
69 #include "p80211metadef.h"
70
71 #include "cfg80211.c"
72
73 /* netdevice method functions */
74 static int p80211knetdev_init(struct net_device *netdev);
75 static int p80211knetdev_open(struct net_device *netdev);
76 static int p80211knetdev_stop(struct net_device *netdev);
77 static netdev_tx_t p80211knetdev_hard_start_xmit(struct sk_buff *skb,
78 struct net_device *netdev);
79 static void p80211knetdev_set_multicast_list(struct net_device *dev);
80 static int p80211knetdev_siocdevprivate(struct net_device *dev, struct ifreq *ifr,
81 void __user *data, int cmd);
82 static int p80211knetdev_set_mac_address(struct net_device *dev, void *addr);
83 static void p80211knetdev_tx_timeout(struct net_device *netdev, unsigned int txqueue);
84 static int p80211_rx_typedrop(struct wlandevice *wlandev, u16 fc);
85
86 int wlan_watchdog = 5000;
87 module_param(wlan_watchdog, int, 0644);
88 MODULE_PARM_DESC(wlan_watchdog, "transmit timeout in milliseconds");
89
90 int wlan_wext_write = 1;
91 module_param(wlan_wext_write, int, 0644);
92 MODULE_PARM_DESC(wlan_wext_write, "enable write wireless extensions");
93
94 /*----------------------------------------------------------------
95 * p80211knetdev_init
96 *
97 * Init method for a Linux netdevice. Called in response to
98 * register_netdev.
99 *
100 * Arguments:
101 * none
102 *
103 * Returns:
104 * nothing
105 *----------------------------------------------------------------
106 */
p80211knetdev_init(struct net_device * netdev)107 static int p80211knetdev_init(struct net_device *netdev)
108 {
109 /* Called in response to register_netdev */
110 /* This is usually the probe function, but the probe has */
111 /* already been done by the MSD and the create_kdev */
112 /* function. All we do here is return success */
113 return 0;
114 }
115
116 /*----------------------------------------------------------------
117 * p80211knetdev_open
118 *
119 * Linux netdevice open method. Following a successful call here,
120 * the device is supposed to be ready for tx and rx. In our
121 * situation that may not be entirely true due to the state of the
122 * MAC below.
123 *
124 * Arguments:
125 * netdev Linux network device structure
126 *
127 * Returns:
128 * zero on success, non-zero otherwise
129 *----------------------------------------------------------------
130 */
p80211knetdev_open(struct net_device * netdev)131 static int p80211knetdev_open(struct net_device *netdev)
132 {
133 int result = 0; /* success */
134 struct wlandevice *wlandev = netdev->ml_priv;
135
136 /* Check to make sure the MSD is running */
137 if (wlandev->msdstate != WLAN_MSD_RUNNING)
138 return -ENODEV;
139
140 /* Tell the MSD to open */
141 if (wlandev->open) {
142 result = wlandev->open(wlandev);
143 if (result == 0) {
144 netif_start_queue(wlandev->netdev);
145 wlandev->state = WLAN_DEVICE_OPEN;
146 }
147 } else {
148 result = -EAGAIN;
149 }
150
151 return result;
152 }
153
154 /*----------------------------------------------------------------
155 * p80211knetdev_stop
156 *
157 * Linux netdevice stop (close) method. Following this call,
158 * no frames should go up or down through this interface.
159 *
160 * Arguments:
161 * netdev Linux network device structure
162 *
163 * Returns:
164 * zero on success, non-zero otherwise
165 *----------------------------------------------------------------
166 */
p80211knetdev_stop(struct net_device * netdev)167 static int p80211knetdev_stop(struct net_device *netdev)
168 {
169 int result = 0;
170 struct wlandevice *wlandev = netdev->ml_priv;
171
172 if (wlandev->close)
173 result = wlandev->close(wlandev);
174
175 netif_stop_queue(wlandev->netdev);
176 wlandev->state = WLAN_DEVICE_CLOSED;
177
178 return result;
179 }
180
181 /*----------------------------------------------------------------
182 * p80211netdev_rx
183 *
184 * Frame receive function called by the mac specific driver.
185 *
186 * Arguments:
187 * wlandev WLAN network device structure
188 * skb skbuff containing a full 802.11 frame.
189 * Returns:
190 * nothing
191 * Side effects:
192 *
193 *----------------------------------------------------------------
194 */
p80211netdev_rx(struct wlandevice * wlandev,struct sk_buff * skb)195 void p80211netdev_rx(struct wlandevice *wlandev, struct sk_buff *skb)
196 {
197 /* Enqueue for post-irq processing */
198 skb_queue_tail(&wlandev->nsd_rxq, skb);
199 tasklet_schedule(&wlandev->rx_bh);
200 }
201
202 #define CONV_TO_ETHER_SKIPPED 0x01
203 #define CONV_TO_ETHER_FAILED 0x02
204
205 /**
206 * p80211_convert_to_ether - conversion from 802.11 frame to ethernet frame
207 * @wlandev: pointer to WLAN device
208 * @skb: pointer to socket buffer
209 *
210 * Returns: 0 if conversion succeeded
211 * CONV_TO_ETHER_FAILED if conversion failed
212 * CONV_TO_ETHER_SKIPPED if frame is ignored
213 */
p80211_convert_to_ether(struct wlandevice * wlandev,struct sk_buff * skb)214 static int p80211_convert_to_ether(struct wlandevice *wlandev,
215 struct sk_buff *skb)
216 {
217 struct p80211_hdr *hdr;
218
219 hdr = (struct p80211_hdr *)skb->data;
220 if (p80211_rx_typedrop(wlandev, le16_to_cpu(hdr->frame_control)))
221 return CONV_TO_ETHER_SKIPPED;
222
223 /* perform mcast filtering: allow my local address through but reject
224 * anything else that isn't multicast
225 */
226 if (wlandev->netdev->flags & IFF_ALLMULTI) {
227 if (!ether_addr_equal_unaligned(wlandev->netdev->dev_addr,
228 hdr->address1)) {
229 if (!is_multicast_ether_addr(hdr->address1))
230 return CONV_TO_ETHER_SKIPPED;
231 }
232 }
233
234 if (skb_p80211_to_ether(wlandev, wlandev->ethconv, skb) == 0) {
235 wlandev->netdev->stats.rx_packets++;
236 wlandev->netdev->stats.rx_bytes += skb->len;
237 netif_rx(skb);
238 return 0;
239 }
240
241 netdev_dbg(wlandev->netdev, "%s failed.\n", __func__);
242 return CONV_TO_ETHER_FAILED;
243 }
244
245 /**
246 * p80211netdev_rx_bh - deferred processing of all received frames
247 *
248 * @t: pointer to the tasklet associated with this handler
249 */
p80211netdev_rx_bh(struct tasklet_struct * t)250 static void p80211netdev_rx_bh(struct tasklet_struct *t)
251 {
252 struct wlandevice *wlandev = from_tasklet(wlandev, t, rx_bh);
253 struct sk_buff *skb = NULL;
254 struct net_device *dev = wlandev->netdev;
255
256 /* Let's empty our queue */
257 while ((skb = skb_dequeue(&wlandev->nsd_rxq))) {
258 if (wlandev->state == WLAN_DEVICE_OPEN) {
259 if (dev->type != ARPHRD_ETHER) {
260 /* RAW frame; we shouldn't convert it */
261 /* XXX Append the Prism Header here instead. */
262
263 /* set up various data fields */
264 skb->dev = dev;
265 skb_reset_mac_header(skb);
266 skb->ip_summed = CHECKSUM_NONE;
267 skb->pkt_type = PACKET_OTHERHOST;
268 skb->protocol = htons(ETH_P_80211_RAW);
269
270 dev->stats.rx_packets++;
271 dev->stats.rx_bytes += skb->len;
272 netif_rx(skb);
273 continue;
274 } else {
275 if (!p80211_convert_to_ether(wlandev, skb))
276 continue;
277 }
278 }
279 dev_kfree_skb(skb);
280 }
281 }
282
283 /*----------------------------------------------------------------
284 * p80211knetdev_hard_start_xmit
285 *
286 * Linux netdevice method for transmitting a frame.
287 *
288 * Arguments:
289 * skb Linux sk_buff containing the frame.
290 * netdev Linux netdevice.
291 *
292 * Side effects:
293 * If the lower layers report that buffers are full. netdev->tbusy
294 * will be set to prevent higher layers from sending more traffic.
295 *
296 * Note: If this function returns non-zero, higher layers retain
297 * ownership of the skb.
298 *
299 * Returns:
300 * zero on success, non-zero on failure.
301 *----------------------------------------------------------------
302 */
p80211knetdev_hard_start_xmit(struct sk_buff * skb,struct net_device * netdev)303 static netdev_tx_t p80211knetdev_hard_start_xmit(struct sk_buff *skb,
304 struct net_device *netdev)
305 {
306 int result = 0;
307 int txresult;
308 struct wlandevice *wlandev = netdev->ml_priv;
309 struct p80211_hdr p80211_hdr;
310 struct p80211_metawep p80211_wep;
311
312 p80211_wep.data = NULL;
313
314 if (!skb)
315 return NETDEV_TX_OK;
316
317 if (wlandev->state != WLAN_DEVICE_OPEN) {
318 result = 1;
319 goto failed;
320 }
321
322 memset(&p80211_hdr, 0, sizeof(p80211_hdr));
323 memset(&p80211_wep, 0, sizeof(p80211_wep));
324
325 if (netif_queue_stopped(netdev)) {
326 netdev_dbg(netdev, "called when queue stopped.\n");
327 result = 1;
328 goto failed;
329 }
330
331 netif_stop_queue(netdev);
332
333 /* Check to see that a valid mode is set */
334 switch (wlandev->macmode) {
335 case WLAN_MACMODE_IBSS_STA:
336 case WLAN_MACMODE_ESS_STA:
337 case WLAN_MACMODE_ESS_AP:
338 break;
339 default:
340 /* Mode isn't set yet, just drop the frame
341 * and return success .
342 * TODO: we need a saner way to handle this
343 */
344 if (be16_to_cpu(skb->protocol) != ETH_P_80211_RAW) {
345 netif_start_queue(wlandev->netdev);
346 netdev_notice(netdev, "Tx attempt prior to association, frame dropped.\n");
347 netdev->stats.tx_dropped++;
348 result = 0;
349 goto failed;
350 }
351 break;
352 }
353
354 /* Check for raw transmits */
355 if (be16_to_cpu(skb->protocol) == ETH_P_80211_RAW) {
356 if (!capable(CAP_NET_ADMIN)) {
357 result = 1;
358 goto failed;
359 }
360 /* move the header over */
361 memcpy(&p80211_hdr, skb->data, sizeof(p80211_hdr));
362 skb_pull(skb, sizeof(p80211_hdr));
363 } else {
364 if (skb_ether_to_p80211
365 (wlandev, wlandev->ethconv, skb, &p80211_hdr,
366 &p80211_wep) != 0) {
367 /* convert failed */
368 netdev_dbg(netdev, "ether_to_80211(%d) failed.\n",
369 wlandev->ethconv);
370 result = 1;
371 goto failed;
372 }
373 }
374 if (!wlandev->txframe) {
375 result = 1;
376 goto failed;
377 }
378
379 netif_trans_update(netdev);
380
381 netdev->stats.tx_packets++;
382 /* count only the packet payload */
383 netdev->stats.tx_bytes += skb->len;
384
385 txresult = wlandev->txframe(wlandev, skb, &p80211_hdr, &p80211_wep);
386
387 if (txresult == 0) {
388 /* success and more buf */
389 /* avail, re: hw_txdata */
390 netif_wake_queue(wlandev->netdev);
391 result = NETDEV_TX_OK;
392 } else if (txresult == 1) {
393 /* success, no more avail */
394 netdev_dbg(netdev, "txframe success, no more bufs\n");
395 /* netdev->tbusy = 1; don't set here, irqhdlr */
396 /* may have already cleared it */
397 result = NETDEV_TX_OK;
398 } else if (txresult == 2) {
399 /* alloc failure, drop frame */
400 netdev_dbg(netdev, "txframe returned alloc_fail\n");
401 result = NETDEV_TX_BUSY;
402 } else {
403 /* buffer full or queue busy, drop frame. */
404 netdev_dbg(netdev, "txframe returned full or busy\n");
405 result = NETDEV_TX_BUSY;
406 }
407
408 failed:
409 /* Free up the WEP buffer if it's not the same as the skb */
410 if ((p80211_wep.data) && (p80211_wep.data != skb->data))
411 kfree_sensitive(p80211_wep.data);
412
413 /* we always free the skb here, never in a lower level. */
414 if (!result)
415 dev_kfree_skb(skb);
416
417 return result;
418 }
419
420 /*----------------------------------------------------------------
421 * p80211knetdev_set_multicast_list
422 *
423 * Called from higher layers whenever there's a need to set/clear
424 * promiscuous mode or rewrite the multicast list.
425 *
426 * Arguments:
427 * none
428 *
429 * Returns:
430 * nothing
431 *----------------------------------------------------------------
432 */
p80211knetdev_set_multicast_list(struct net_device * dev)433 static void p80211knetdev_set_multicast_list(struct net_device *dev)
434 {
435 struct wlandevice *wlandev = dev->ml_priv;
436
437 /* TODO: real multicast support as well */
438
439 if (wlandev->set_multicast_list)
440 wlandev->set_multicast_list(wlandev, dev);
441 }
442
443 /*----------------------------------------------------------------
444 * p80211knetdev_siocdevprivate
445 *
446 * Handle an ioctl call on one of our devices. Everything Linux
447 * ioctl specific is done here. Then we pass the contents of the
448 * ifr->data to the request message handler.
449 *
450 * Arguments:
451 * dev Linux kernel netdevice
452 * ifr Our private ioctl request structure, typed for the
453 * generic struct ifreq so we can use ptr to func
454 * w/o cast.
455 *
456 * Returns:
457 * zero on success, a negative errno on failure. Possible values:
458 * -ENETDOWN Device isn't up.
459 * -EBUSY cmd already in progress
460 * -ETIME p80211 cmd timed out (MSD may have its own timers)
461 * -EFAULT memory fault copying msg from user buffer
462 * -ENOMEM unable to allocate kernel msg buffer
463 * -EINVAL bad magic, it the cmd really for us?
464 * -EintR sleeping on cmd, awakened by signal, cmd cancelled.
465 *
466 * Call Context:
467 * Process thread (ioctl caller). TODO: SMP support may require
468 * locks.
469 *----------------------------------------------------------------
470 */
p80211knetdev_siocdevprivate(struct net_device * dev,struct ifreq * ifr,void __user * data,int cmd)471 static int p80211knetdev_siocdevprivate(struct net_device *dev,
472 struct ifreq *ifr,
473 void __user *data, int cmd)
474 {
475 int result = 0;
476 struct p80211ioctl_req *req = (struct p80211ioctl_req *)ifr;
477 struct wlandevice *wlandev = dev->ml_priv;
478 u8 *msgbuf;
479
480 netdev_dbg(dev, "rx'd ioctl, cmd=%d, len=%d\n", cmd, req->len);
481
482 if (in_compat_syscall())
483 return -EOPNOTSUPP;
484
485 /* Test the magic, assume ifr is good if it's there */
486 if (req->magic != P80211_IOCTL_MAGIC) {
487 result = -EINVAL;
488 goto bail;
489 }
490
491 if (cmd == P80211_IFTEST) {
492 result = 0;
493 goto bail;
494 } else if (cmd != P80211_IFREQ) {
495 result = -EINVAL;
496 goto bail;
497 }
498
499 msgbuf = memdup_user(data, req->len);
500 if (IS_ERR(msgbuf)) {
501 result = PTR_ERR(msgbuf);
502 goto bail;
503 }
504
505 result = p80211req_dorequest(wlandev, msgbuf);
506
507 if (result == 0) {
508 if (copy_to_user(data, msgbuf, req->len))
509 result = -EFAULT;
510 }
511 kfree(msgbuf);
512
513 bail:
514 /* If allocate,copyfrom or copyto fails, return errno */
515 return result;
516 }
517
518 /*----------------------------------------------------------------
519 * p80211knetdev_set_mac_address
520 *
521 * Handles the ioctl for changing the MACAddress of a netdevice
522 *
523 * references: linux/netdevice.h and drivers/net/net_init.c
524 *
525 * NOTE: [MSM] We only prevent address changes when the netdev is
526 * up. We don't control anything based on dot11 state. If the
527 * address is changed on a STA that's currently associated, you
528 * will probably lose the ability to send and receive data frames.
529 * Just be aware. Therefore, this should usually only be done
530 * prior to scan/join/auth/assoc.
531 *
532 * Arguments:
533 * dev netdevice struct
534 * addr the new MACAddress (a struct)
535 *
536 * Returns:
537 * zero on success, a negative errno on failure. Possible values:
538 * -EBUSY device is bussy (cmd not possible)
539 * -and errors returned by: p80211req_dorequest(..)
540 *
541 * by: Collin R. Mulliner <collin@mulliner.org>
542 *----------------------------------------------------------------
543 */
p80211knetdev_set_mac_address(struct net_device * dev,void * addr)544 static int p80211knetdev_set_mac_address(struct net_device *dev, void *addr)
545 {
546 struct sockaddr *new_addr = addr;
547 struct p80211msg_dot11req_mibset dot11req;
548 struct p80211item_unk392 *mibattr;
549 struct p80211item_pstr6 *macaddr;
550 struct p80211item_uint32 *resultcode;
551 int result;
552
553 /* If we're running, we don't allow MAC address changes */
554 if (netif_running(dev))
555 return -EBUSY;
556
557 /* Set up some convenience pointers. */
558 mibattr = &dot11req.mibattribute;
559 macaddr = (struct p80211item_pstr6 *)&mibattr->data;
560 resultcode = &dot11req.resultcode;
561
562 /* Set up a dot11req_mibset */
563 memset(&dot11req, 0, sizeof(dot11req));
564 dot11req.msgcode = DIDMSG_DOT11REQ_MIBSET;
565 dot11req.msglen = sizeof(dot11req);
566 memcpy(dot11req.devname,
567 ((struct wlandevice *)dev->ml_priv)->name,
568 WLAN_DEVNAMELEN_MAX - 1);
569
570 /* Set up the mibattribute argument */
571 mibattr->did = DIDMSG_DOT11REQ_MIBSET_MIBATTRIBUTE;
572 mibattr->status = P80211ENUM_msgitem_status_data_ok;
573 mibattr->len = sizeof(mibattr->data);
574
575 macaddr->did = DIDMIB_DOT11MAC_OPERATIONTABLE_MACADDRESS;
576 macaddr->status = P80211ENUM_msgitem_status_data_ok;
577 macaddr->len = sizeof(macaddr->data);
578 macaddr->data.len = ETH_ALEN;
579 memcpy(&macaddr->data.data, new_addr->sa_data, ETH_ALEN);
580
581 /* Set up the resultcode argument */
582 resultcode->did = DIDMSG_DOT11REQ_MIBSET_RESULTCODE;
583 resultcode->status = P80211ENUM_msgitem_status_no_value;
584 resultcode->len = sizeof(resultcode->data);
585 resultcode->data = 0;
586
587 /* now fire the request */
588 result = p80211req_dorequest(dev->ml_priv, (u8 *)&dot11req);
589
590 /* If the request wasn't successful, report an error and don't
591 * change the netdev address
592 */
593 if (result != 0 || resultcode->data != P80211ENUM_resultcode_success) {
594 netdev_err(dev, "Low-level driver failed dot11req_mibset(dot11MACAddress).\n");
595 result = -EADDRNOTAVAIL;
596 } else {
597 /* everything's ok, change the addr in netdev */
598 eth_hw_addr_set(dev, new_addr->sa_data);
599 }
600
601 return result;
602 }
603
604 static const struct net_device_ops p80211_netdev_ops = {
605 .ndo_init = p80211knetdev_init,
606 .ndo_open = p80211knetdev_open,
607 .ndo_stop = p80211knetdev_stop,
608 .ndo_start_xmit = p80211knetdev_hard_start_xmit,
609 .ndo_set_rx_mode = p80211knetdev_set_multicast_list,
610 .ndo_siocdevprivate = p80211knetdev_siocdevprivate,
611 .ndo_set_mac_address = p80211knetdev_set_mac_address,
612 .ndo_tx_timeout = p80211knetdev_tx_timeout,
613 .ndo_validate_addr = eth_validate_addr,
614 };
615
616 /*----------------------------------------------------------------
617 * wlan_setup
618 *
619 * Roughly matches the functionality of ether_setup. Here
620 * we set up any members of the wlandevice structure that are common
621 * to all devices. Additionally, we allocate a linux 'struct device'
622 * and perform the same setup as ether_setup.
623 *
624 * Note: It's important that the caller have setup the wlandev->name
625 * ptr prior to calling this function.
626 *
627 * Arguments:
628 * wlandev ptr to the wlandev structure for the
629 * interface.
630 * physdev ptr to usb device
631 * Returns:
632 * zero on success, non-zero otherwise.
633 * Call Context:
634 * Should be process thread. We'll assume it might be
635 * interrupt though. When we add support for statically
636 * compiled drivers, this function will be called in the
637 * context of the kernel startup code.
638 *----------------------------------------------------------------
639 */
wlan_setup(struct wlandevice * wlandev,struct device * physdev)640 int wlan_setup(struct wlandevice *wlandev, struct device *physdev)
641 {
642 int result = 0;
643 struct net_device *netdev;
644 struct wiphy *wiphy;
645 struct wireless_dev *wdev;
646
647 /* Set up the wlandev */
648 wlandev->state = WLAN_DEVICE_CLOSED;
649 wlandev->ethconv = WLAN_ETHCONV_8021h;
650 wlandev->macmode = WLAN_MACMODE_NONE;
651
652 /* Set up the rx queue */
653 skb_queue_head_init(&wlandev->nsd_rxq);
654 tasklet_setup(&wlandev->rx_bh, p80211netdev_rx_bh);
655
656 /* Allocate and initialize the wiphy struct */
657 wiphy = wlan_create_wiphy(physdev, wlandev);
658 if (!wiphy) {
659 dev_err(physdev, "Failed to alloc wiphy.\n");
660 return 1;
661 }
662
663 /* Allocate and initialize the struct device */
664 netdev = alloc_netdev(sizeof(struct wireless_dev), "wlan%d",
665 NET_NAME_UNKNOWN, ether_setup);
666 if (!netdev) {
667 dev_err(physdev, "Failed to alloc netdev.\n");
668 wlan_free_wiphy(wiphy);
669 result = 1;
670 } else {
671 wlandev->netdev = netdev;
672 netdev->ml_priv = wlandev;
673 netdev->netdev_ops = &p80211_netdev_ops;
674 wdev = netdev_priv(netdev);
675 wdev->wiphy = wiphy;
676 wdev->iftype = NL80211_IFTYPE_STATION;
677 netdev->ieee80211_ptr = wdev;
678 netdev->min_mtu = 68;
679 /* 2312 is max 802.11 payload, 20 is overhead,
680 * (ether + llc + snap) and another 8 for wep.
681 */
682 netdev->max_mtu = (2312 - 20 - 8);
683
684 netif_stop_queue(netdev);
685 netif_carrier_off(netdev);
686 }
687
688 return result;
689 }
690
691 /*----------------------------------------------------------------
692 * wlan_unsetup
693 *
694 * This function is paired with the wlan_setup routine. It should
695 * be called after unregister_wlandev. Basically, all it does is
696 * free the 'struct device' that's associated with the wlandev.
697 * We do it here because the 'struct device' isn't allocated
698 * explicitly in the driver code, it's done in wlan_setup. To
699 * do the free in the driver might seem like 'magic'.
700 *
701 * Arguments:
702 * wlandev ptr to the wlandev structure for the
703 * interface.
704 * Call Context:
705 * Should be process thread. We'll assume it might be
706 * interrupt though. When we add support for statically
707 * compiled drivers, this function will be called in the
708 * context of the kernel startup code.
709 *----------------------------------------------------------------
710 */
wlan_unsetup(struct wlandevice * wlandev)711 void wlan_unsetup(struct wlandevice *wlandev)
712 {
713 struct wireless_dev *wdev;
714
715 tasklet_kill(&wlandev->rx_bh);
716
717 if (wlandev->netdev) {
718 wdev = netdev_priv(wlandev->netdev);
719 if (wdev->wiphy)
720 wlan_free_wiphy(wdev->wiphy);
721 free_netdev(wlandev->netdev);
722 wlandev->netdev = NULL;
723 }
724 }
725
726 /*----------------------------------------------------------------
727 * register_wlandev
728 *
729 * Roughly matches the functionality of register_netdev. This function
730 * is called after the driver has successfully probed and set up the
731 * resources for the device. It's now ready to become a named device
732 * in the Linux system.
733 *
734 * First we allocate a name for the device (if not already set), then
735 * we call the Linux function register_netdevice.
736 *
737 * Arguments:
738 * wlandev ptr to the wlandev structure for the
739 * interface.
740 * Returns:
741 * zero on success, non-zero otherwise.
742 * Call Context:
743 * Can be either interrupt or not.
744 *----------------------------------------------------------------
745 */
register_wlandev(struct wlandevice * wlandev)746 int register_wlandev(struct wlandevice *wlandev)
747 {
748 return register_netdev(wlandev->netdev);
749 }
750
751 /*----------------------------------------------------------------
752 * unregister_wlandev
753 *
754 * Roughly matches the functionality of unregister_netdev. This
755 * function is called to remove a named device from the system.
756 *
757 * First we tell linux that the device should no longer exist.
758 * Then we remove it from the list of known wlan devices.
759 *
760 * Arguments:
761 * wlandev ptr to the wlandev structure for the
762 * interface.
763 * Returns:
764 * zero on success, non-zero otherwise.
765 * Call Context:
766 * Can be either interrupt or not.
767 *----------------------------------------------------------------
768 */
unregister_wlandev(struct wlandevice * wlandev)769 int unregister_wlandev(struct wlandevice *wlandev)
770 {
771 struct sk_buff *skb;
772
773 unregister_netdev(wlandev->netdev);
774
775 /* Now to clean out the rx queue */
776 while ((skb = skb_dequeue(&wlandev->nsd_rxq)))
777 dev_kfree_skb(skb);
778
779 return 0;
780 }
781
782 /*----------------------------------------------------------------
783 * p80211netdev_hwremoved
784 *
785 * Hardware removed notification. This function should be called
786 * immediately after an MSD has detected that the underlying hardware
787 * has been yanked out from under us. The primary things we need
788 * to do are:
789 * - Mark the wlandev
790 * - Prevent any further traffic from the knetdev i/f
791 * - Prevent any further requests from mgmt i/f
792 * - If there are any waitq'd mgmt requests or mgmt-frame exchanges,
793 * shut them down.
794 * - Call the MSD hwremoved function.
795 *
796 * The remainder of the cleanup will be handled by unregister().
797 * Our primary goal here is to prevent as much tickling of the MSD
798 * as possible since the MSD is already in a 'wounded' state.
799 *
800 * TODO: As new features are added, this function should be
801 * updated.
802 *
803 * Arguments:
804 * wlandev WLAN network device structure
805 * Returns:
806 * nothing
807 * Side effects:
808 *
809 * Call context:
810 * Usually interrupt.
811 *----------------------------------------------------------------
812 */
p80211netdev_hwremoved(struct wlandevice * wlandev)813 void p80211netdev_hwremoved(struct wlandevice *wlandev)
814 {
815 wlandev->hwremoved = 1;
816 if (wlandev->state == WLAN_DEVICE_OPEN)
817 netif_stop_queue(wlandev->netdev);
818
819 netif_device_detach(wlandev->netdev);
820 }
821
822 /*----------------------------------------------------------------
823 * p80211_rx_typedrop
824 *
825 * Classifies the frame, increments the appropriate counter, and
826 * returns 0|1|2 indicating whether the driver should handle, ignore, or
827 * drop the frame
828 *
829 * Arguments:
830 * wlandev wlan device structure
831 * fc frame control field
832 *
833 * Returns:
834 * zero if the frame should be handled by the driver,
835 * one if the frame should be ignored
836 * anything else means we drop it.
837 *
838 * Side effects:
839 *
840 * Call context:
841 * interrupt
842 *----------------------------------------------------------------
843 */
p80211_rx_typedrop(struct wlandevice * wlandev,u16 fc)844 static int p80211_rx_typedrop(struct wlandevice *wlandev, u16 fc)
845 {
846 u16 ftype;
847 u16 fstype;
848 int drop = 0;
849 /* Classify frame, increment counter */
850 ftype = WLAN_GET_FC_FTYPE(fc);
851 fstype = WLAN_GET_FC_FSTYPE(fc);
852 switch (ftype) {
853 case WLAN_FTYPE_MGMT:
854 if ((wlandev->netdev->flags & IFF_PROMISC) ||
855 (wlandev->netdev->flags & IFF_ALLMULTI)) {
856 drop = 1;
857 break;
858 }
859 netdev_dbg(wlandev->netdev, "rx'd mgmt:\n");
860 wlandev->rx.mgmt++;
861 switch (fstype) {
862 case WLAN_FSTYPE_ASSOCREQ:
863 wlandev->rx.assocreq++;
864 break;
865 case WLAN_FSTYPE_ASSOCRESP:
866 wlandev->rx.assocresp++;
867 break;
868 case WLAN_FSTYPE_REASSOCREQ:
869 wlandev->rx.reassocreq++;
870 break;
871 case WLAN_FSTYPE_REASSOCRESP:
872 wlandev->rx.reassocresp++;
873 break;
874 case WLAN_FSTYPE_PROBEREQ:
875 wlandev->rx.probereq++;
876 break;
877 case WLAN_FSTYPE_PROBERESP:
878 wlandev->rx.proberesp++;
879 break;
880 case WLAN_FSTYPE_BEACON:
881 wlandev->rx.beacon++;
882 break;
883 case WLAN_FSTYPE_ATIM:
884 wlandev->rx.atim++;
885 break;
886 case WLAN_FSTYPE_DISASSOC:
887 wlandev->rx.disassoc++;
888 break;
889 case WLAN_FSTYPE_AUTHEN:
890 wlandev->rx.authen++;
891 break;
892 case WLAN_FSTYPE_DEAUTHEN:
893 wlandev->rx.deauthen++;
894 break;
895 default:
896 wlandev->rx.mgmt_unknown++;
897 break;
898 }
899 drop = 2;
900 break;
901
902 case WLAN_FTYPE_CTL:
903 if ((wlandev->netdev->flags & IFF_PROMISC) ||
904 (wlandev->netdev->flags & IFF_ALLMULTI)) {
905 drop = 1;
906 break;
907 }
908 netdev_dbg(wlandev->netdev, "rx'd ctl:\n");
909 wlandev->rx.ctl++;
910 switch (fstype) {
911 case WLAN_FSTYPE_PSPOLL:
912 wlandev->rx.pspoll++;
913 break;
914 case WLAN_FSTYPE_RTS:
915 wlandev->rx.rts++;
916 break;
917 case WLAN_FSTYPE_CTS:
918 wlandev->rx.cts++;
919 break;
920 case WLAN_FSTYPE_ACK:
921 wlandev->rx.ack++;
922 break;
923 case WLAN_FSTYPE_CFEND:
924 wlandev->rx.cfend++;
925 break;
926 case WLAN_FSTYPE_CFENDCFACK:
927 wlandev->rx.cfendcfack++;
928 break;
929 default:
930 wlandev->rx.ctl_unknown++;
931 break;
932 }
933 drop = 2;
934 break;
935
936 case WLAN_FTYPE_DATA:
937 wlandev->rx.data++;
938 switch (fstype) {
939 case WLAN_FSTYPE_DATAONLY:
940 wlandev->rx.dataonly++;
941 break;
942 case WLAN_FSTYPE_DATA_CFACK:
943 wlandev->rx.data_cfack++;
944 break;
945 case WLAN_FSTYPE_DATA_CFPOLL:
946 wlandev->rx.data_cfpoll++;
947 break;
948 case WLAN_FSTYPE_DATA_CFACK_CFPOLL:
949 wlandev->rx.data__cfack_cfpoll++;
950 break;
951 case WLAN_FSTYPE_NULL:
952 netdev_dbg(wlandev->netdev, "rx'd data:null\n");
953 wlandev->rx.null++;
954 break;
955 case WLAN_FSTYPE_CFACK:
956 netdev_dbg(wlandev->netdev, "rx'd data:cfack\n");
957 wlandev->rx.cfack++;
958 break;
959 case WLAN_FSTYPE_CFPOLL:
960 netdev_dbg(wlandev->netdev, "rx'd data:cfpoll\n");
961 wlandev->rx.cfpoll++;
962 break;
963 case WLAN_FSTYPE_CFACK_CFPOLL:
964 netdev_dbg(wlandev->netdev, "rx'd data:cfack_cfpoll\n");
965 wlandev->rx.cfack_cfpoll++;
966 break;
967 default:
968 wlandev->rx.data_unknown++;
969 break;
970 }
971
972 break;
973 }
974 return drop;
975 }
976
p80211knetdev_tx_timeout(struct net_device * netdev,unsigned int txqueue)977 static void p80211knetdev_tx_timeout(struct net_device *netdev, unsigned int txqueue)
978 {
979 struct wlandevice *wlandev = netdev->ml_priv;
980
981 if (wlandev->tx_timeout) {
982 wlandev->tx_timeout(wlandev);
983 } else {
984 netdev_warn(netdev, "Implement tx_timeout for %s\n",
985 wlandev->nsdname);
986 netif_wake_queue(wlandev->netdev);
987 }
988 }
989