1 // SPDX-License-Identifier: GPL-2.0+
2
3 /*
4 * Support for EC-connected GPIOs for identify
5 * LED/button on Barco P50 board
6 *
7 * Copyright (C) 2021 Barco NV
8 * Author: Santosh Kumar Yadav <santoshkumar.yadav@barco.com>
9 */
10
11 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
12
13 #include <linux/delay.h>
14 #include <linux/dmi.h>
15 #include <linux/err.h>
16 #include <linux/io.h>
17 #include <linux/kernel.h>
18 #include <linux/leds.h>
19 #include <linux/module.h>
20 #include <linux/platform_device.h>
21 #include <linux/gpio_keys.h>
22 #include <linux/gpio/driver.h>
23 #include <linux/gpio/machine.h>
24 #include <linux/input.h>
25
26
27 #define DRIVER_NAME "barco-p50-gpio"
28
29 /* GPIO lines */
30 #define P50_GPIO_LINE_LED 0
31 #define P50_GPIO_LINE_BTN 1
32
33 /* GPIO IO Ports */
34 #define P50_GPIO_IO_PORT_BASE 0x299
35
36 #define P50_PORT_DATA 0x00
37 #define P50_PORT_CMD 0x01
38
39 #define P50_STATUS_OBF 0x01 /* EC output buffer full */
40 #define P50_STATUS_IBF 0x02 /* EC input buffer full */
41
42 #define P50_CMD_READ 0xa0
43 #define P50_CMD_WRITE 0x50
44
45 /* EC mailbox registers */
46 #define P50_MBOX_REG_CMD 0x00
47 #define P50_MBOX_REG_STATUS 0x01
48 #define P50_MBOX_REG_PARAM 0x02
49 #define P50_MBOX_REG_DATA 0x03
50
51 #define P50_MBOX_CMD_READ_GPIO 0x11
52 #define P50_MBOX_CMD_WRITE_GPIO 0x12
53 #define P50_MBOX_CMD_CLEAR 0xff
54
55 #define P50_MBOX_STATUS_SUCCESS 0x01
56
57 #define P50_MBOX_PARAM_LED 0x12
58 #define P50_MBOX_PARAM_BTN 0x13
59
60
61 struct p50_gpio {
62 struct gpio_chip gc;
63 struct mutex lock;
64 unsigned long base;
65 struct platform_device *leds_pdev;
66 struct platform_device *keys_pdev;
67 };
68
69 static struct platform_device *gpio_pdev;
70
71 static int gpio_params[] = {
72 [P50_GPIO_LINE_LED] = P50_MBOX_PARAM_LED,
73 [P50_GPIO_LINE_BTN] = P50_MBOX_PARAM_BTN,
74 };
75
76 static const char * const gpio_names[] = {
77 [P50_GPIO_LINE_LED] = "identify-led",
78 [P50_GPIO_LINE_BTN] = "identify-button",
79 };
80
81
82 static struct gpiod_lookup_table p50_gpio_led_table = {
83 .dev_id = "leds-gpio",
84 .table = {
85 GPIO_LOOKUP_IDX(DRIVER_NAME, P50_GPIO_LINE_LED, NULL, 0, GPIO_ACTIVE_HIGH),
86 {}
87 }
88 };
89
90 /* GPIO LEDs */
91 static struct gpio_led leds[] = {
92 { .name = "identify" }
93 };
94
95 static struct gpio_led_platform_data leds_pdata = {
96 .num_leds = ARRAY_SIZE(leds),
97 .leds = leds,
98 };
99
100 /* GPIO keyboard */
101 static struct gpio_keys_button buttons[] = {
102 {
103 .code = KEY_VENDOR,
104 .gpio = P50_GPIO_LINE_BTN,
105 .active_low = 1,
106 .type = EV_KEY,
107 .value = 1,
108 },
109 };
110
111 static struct gpio_keys_platform_data keys_pdata = {
112 .buttons = buttons,
113 .nbuttons = ARRAY_SIZE(buttons),
114 .poll_interval = 100,
115 .rep = 0,
116 .name = "identify",
117 };
118
119
120 /* low level access routines */
121
p50_wait_ec(struct p50_gpio * p50,int mask,int expected)122 static int p50_wait_ec(struct p50_gpio *p50, int mask, int expected)
123 {
124 int i, val;
125
126 for (i = 0; i < 100; i++) {
127 val = inb(p50->base + P50_PORT_CMD) & mask;
128 if (val == expected)
129 return 0;
130 usleep_range(500, 2000);
131 }
132
133 dev_err(p50->gc.parent, "Timed out waiting for EC (0x%x)\n", val);
134 return -ETIMEDOUT;
135 }
136
137
p50_read_mbox_reg(struct p50_gpio * p50,int reg)138 static int p50_read_mbox_reg(struct p50_gpio *p50, int reg)
139 {
140 int ret;
141
142 ret = p50_wait_ec(p50, P50_STATUS_IBF, 0);
143 if (ret)
144 return ret;
145
146 /* clear output buffer flag, prevent unfinished commands */
147 inb(p50->base + P50_PORT_DATA);
148
149 /* cmd/address */
150 outb(P50_CMD_READ | reg, p50->base + P50_PORT_CMD);
151
152 ret = p50_wait_ec(p50, P50_STATUS_OBF, P50_STATUS_OBF);
153 if (ret)
154 return ret;
155
156 return inb(p50->base + P50_PORT_DATA);
157 }
158
p50_write_mbox_reg(struct p50_gpio * p50,int reg,int val)159 static int p50_write_mbox_reg(struct p50_gpio *p50, int reg, int val)
160 {
161 int ret;
162
163 ret = p50_wait_ec(p50, P50_STATUS_IBF, 0);
164 if (ret)
165 return ret;
166
167 /* cmd/address */
168 outb(P50_CMD_WRITE | reg, p50->base + P50_PORT_CMD);
169
170 ret = p50_wait_ec(p50, P50_STATUS_IBF, 0);
171 if (ret)
172 return ret;
173
174 /* data */
175 outb(val, p50->base + P50_PORT_DATA);
176
177 return 0;
178 }
179
180
181 /* mbox routines */
182
p50_wait_mbox_idle(struct p50_gpio * p50)183 static int p50_wait_mbox_idle(struct p50_gpio *p50)
184 {
185 int i, val;
186
187 for (i = 0; i < 1000; i++) {
188 val = p50_read_mbox_reg(p50, P50_MBOX_REG_CMD);
189 /* cmd is 0 when idle */
190 if (val <= 0)
191 return val;
192
193 usleep_range(500, 2000);
194 }
195
196 dev_err(p50->gc.parent, "Timed out waiting for EC mbox idle (CMD: 0x%x)\n", val);
197
198 return -ETIMEDOUT;
199 }
200
p50_send_mbox_cmd(struct p50_gpio * p50,int cmd,int param,int data)201 static int p50_send_mbox_cmd(struct p50_gpio *p50, int cmd, int param, int data)
202 {
203 int ret;
204
205 ret = p50_wait_mbox_idle(p50);
206 if (ret)
207 return ret;
208
209 ret = p50_write_mbox_reg(p50, P50_MBOX_REG_DATA, data);
210 if (ret)
211 return ret;
212
213 ret = p50_write_mbox_reg(p50, P50_MBOX_REG_PARAM, param);
214 if (ret)
215 return ret;
216
217 ret = p50_write_mbox_reg(p50, P50_MBOX_REG_CMD, cmd);
218 if (ret)
219 return ret;
220
221 ret = p50_wait_mbox_idle(p50);
222 if (ret)
223 return ret;
224
225 ret = p50_read_mbox_reg(p50, P50_MBOX_REG_STATUS);
226 if (ret < 0)
227 return ret;
228
229 if (ret == P50_MBOX_STATUS_SUCCESS)
230 return 0;
231
232 dev_err(p50->gc.parent, "Mbox command failed (CMD=0x%x STAT=0x%x PARAM=0x%x DATA=0x%x)\n",
233 cmd, ret, param, data);
234
235 return -EIO;
236 }
237
238
239 /* gpio routines */
240
p50_gpio_get_direction(struct gpio_chip * gc,unsigned int offset)241 static int p50_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
242 {
243 switch (offset) {
244 case P50_GPIO_LINE_BTN:
245 return GPIO_LINE_DIRECTION_IN;
246
247 case P50_GPIO_LINE_LED:
248 return GPIO_LINE_DIRECTION_OUT;
249
250 default:
251 return -EINVAL;
252 }
253 }
254
p50_gpio_get(struct gpio_chip * gc,unsigned int offset)255 static int p50_gpio_get(struct gpio_chip *gc, unsigned int offset)
256 {
257 struct p50_gpio *p50 = gpiochip_get_data(gc);
258 int ret;
259
260 mutex_lock(&p50->lock);
261
262 ret = p50_send_mbox_cmd(p50, P50_MBOX_CMD_READ_GPIO, gpio_params[offset], 0);
263 if (ret == 0)
264 ret = p50_read_mbox_reg(p50, P50_MBOX_REG_DATA);
265
266 mutex_unlock(&p50->lock);
267
268 return ret;
269 }
270
p50_gpio_set(struct gpio_chip * gc,unsigned int offset,int value)271 static void p50_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
272 {
273 struct p50_gpio *p50 = gpiochip_get_data(gc);
274
275 mutex_lock(&p50->lock);
276
277 p50_send_mbox_cmd(p50, P50_MBOX_CMD_WRITE_GPIO, gpio_params[offset], value);
278
279 mutex_unlock(&p50->lock);
280 }
281
p50_gpio_probe(struct platform_device * pdev)282 static int p50_gpio_probe(struct platform_device *pdev)
283 {
284 struct p50_gpio *p50;
285 struct resource *res;
286 int ret;
287
288 res = platform_get_resource(pdev, IORESOURCE_IO, 0);
289 if (!res) {
290 dev_err(&pdev->dev, "Cannot get I/O ports\n");
291 return -ENODEV;
292 }
293
294 if (!devm_request_region(&pdev->dev, res->start, resource_size(res), pdev->name)) {
295 dev_err(&pdev->dev, "Unable to reserve I/O region\n");
296 return -EBUSY;
297 }
298
299 p50 = devm_kzalloc(&pdev->dev, sizeof(*p50), GFP_KERNEL);
300 if (!p50)
301 return -ENOMEM;
302
303 platform_set_drvdata(pdev, p50);
304 mutex_init(&p50->lock);
305 p50->base = res->start;
306 p50->gc.owner = THIS_MODULE;
307 p50->gc.parent = &pdev->dev;
308 p50->gc.label = dev_name(&pdev->dev);
309 p50->gc.ngpio = ARRAY_SIZE(gpio_names);
310 p50->gc.names = gpio_names;
311 p50->gc.can_sleep = true;
312 p50->gc.base = -1;
313 p50->gc.get_direction = p50_gpio_get_direction;
314 p50->gc.get = p50_gpio_get;
315 p50->gc.set = p50_gpio_set;
316
317
318 /* reset mbox */
319 ret = p50_wait_mbox_idle(p50);
320 if (ret)
321 return ret;
322
323 ret = p50_write_mbox_reg(p50, P50_MBOX_REG_CMD, P50_MBOX_CMD_CLEAR);
324 if (ret)
325 return ret;
326
327 ret = p50_wait_mbox_idle(p50);
328 if (ret)
329 return ret;
330
331
332 ret = devm_gpiochip_add_data(&pdev->dev, &p50->gc, p50);
333 if (ret < 0) {
334 dev_err(&pdev->dev, "Could not register gpiochip: %d\n", ret);
335 return ret;
336 }
337
338 gpiod_add_lookup_table(&p50_gpio_led_table);
339
340 p50->leds_pdev = platform_device_register_data(&pdev->dev,
341 "leds-gpio", PLATFORM_DEVID_NONE, &leds_pdata, sizeof(leds_pdata));
342
343 if (IS_ERR(p50->leds_pdev)) {
344 ret = PTR_ERR(p50->leds_pdev);
345 dev_err(&pdev->dev, "Could not register leds-gpio: %d\n", ret);
346 goto err_leds;
347 }
348
349 /* gpio-keys-polled uses old-style gpio interface, pass the right identifier */
350 buttons[0].gpio += p50->gc.base;
351
352 p50->keys_pdev =
353 platform_device_register_data(&pdev->dev, "gpio-keys-polled",
354 PLATFORM_DEVID_NONE,
355 &keys_pdata, sizeof(keys_pdata));
356
357 if (IS_ERR(p50->keys_pdev)) {
358 ret = PTR_ERR(p50->keys_pdev);
359 dev_err(&pdev->dev, "Could not register gpio-keys-polled: %d\n", ret);
360 goto err_keys;
361 }
362
363 return 0;
364
365 err_keys:
366 platform_device_unregister(p50->leds_pdev);
367 err_leds:
368 gpiod_remove_lookup_table(&p50_gpio_led_table);
369
370 return ret;
371 }
372
p50_gpio_remove(struct platform_device * pdev)373 static void p50_gpio_remove(struct platform_device *pdev)
374 {
375 struct p50_gpio *p50 = platform_get_drvdata(pdev);
376
377 platform_device_unregister(p50->keys_pdev);
378 platform_device_unregister(p50->leds_pdev);
379
380 gpiod_remove_lookup_table(&p50_gpio_led_table);
381 }
382
383 static struct platform_driver p50_gpio_driver = {
384 .driver = {
385 .name = DRIVER_NAME,
386 },
387 .probe = p50_gpio_probe,
388 .remove_new = p50_gpio_remove,
389 };
390
391 /* Board setup */
392 static const struct dmi_system_id dmi_ids[] __initconst = {
393 {
394 .matches = {
395 DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Barco"),
396 DMI_EXACT_MATCH(DMI_PRODUCT_FAMILY, "P50")
397 },
398 },
399 {}
400 };
401 MODULE_DEVICE_TABLE(dmi, dmi_ids);
402
p50_module_init(void)403 static int __init p50_module_init(void)
404 {
405 struct resource res = DEFINE_RES_IO(P50_GPIO_IO_PORT_BASE, P50_PORT_CMD + 1);
406 int ret;
407
408 if (!dmi_first_match(dmi_ids))
409 return -ENODEV;
410
411 ret = platform_driver_register(&p50_gpio_driver);
412 if (ret)
413 return ret;
414
415 gpio_pdev = platform_device_register_simple(DRIVER_NAME, PLATFORM_DEVID_NONE, &res, 1);
416 if (IS_ERR(gpio_pdev)) {
417 pr_err("failed registering %s: %ld\n", DRIVER_NAME, PTR_ERR(gpio_pdev));
418 platform_driver_unregister(&p50_gpio_driver);
419 return PTR_ERR(gpio_pdev);
420 }
421
422 return 0;
423 }
424
p50_module_exit(void)425 static void __exit p50_module_exit(void)
426 {
427 platform_device_unregister(gpio_pdev);
428 platform_driver_unregister(&p50_gpio_driver);
429 }
430
431 module_init(p50_module_init);
432 module_exit(p50_module_exit);
433
434 MODULE_AUTHOR("Santosh Kumar Yadav, Barco NV <santoshkumar.yadav@barco.com>");
435 MODULE_DESCRIPTION("Barco P50 identify GPIOs driver");
436 MODULE_LICENSE("GPL");
437