1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
4 // Copyright 2008 Juergen Beisert, kernel@pengutronix.de
5 //
6 // Based on code from Freescale Semiconductor,
7 // Authors: Daniel Mack, Juergen Beisert.
8 // Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
9
10 #include <linux/clk.h>
11 #include <linux/err.h>
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/io.h>
15 #include <linux/irq.h>
16 #include <linux/irqdomain.h>
17 #include <linux/irqchip/chained_irq.h>
18 #include <linux/module.h>
19 #include <linux/platform_device.h>
20 #include <linux/pm_runtime.h>
21 #include <linux/slab.h>
22 #include <linux/spinlock.h>
23 #include <linux/syscore_ops.h>
24 #include <linux/gpio/driver.h>
25 #include <linux/of.h>
26 #include <linux/bug.h>
27
28 #define IMX_SCU_WAKEUP_OFF 0
29 #define IMX_SCU_WAKEUP_LOW_LVL 4
30 #define IMX_SCU_WAKEUP_FALL_EDGE 5
31 #define IMX_SCU_WAKEUP_RISE_EDGE 6
32 #define IMX_SCU_WAKEUP_HIGH_LVL 7
33
34 /* device type dependent stuff */
35 struct mxc_gpio_hwdata {
36 unsigned dr_reg;
37 unsigned gdir_reg;
38 unsigned psr_reg;
39 unsigned icr1_reg;
40 unsigned icr2_reg;
41 unsigned imr_reg;
42 unsigned isr_reg;
43 int edge_sel_reg;
44 unsigned low_level;
45 unsigned high_level;
46 unsigned rise_edge;
47 unsigned fall_edge;
48 };
49
50 struct mxc_gpio_reg_saved {
51 u32 icr1;
52 u32 icr2;
53 u32 imr;
54 u32 gdir;
55 u32 edge_sel;
56 u32 dr;
57 };
58
59 struct mxc_gpio_port {
60 struct list_head node;
61 void __iomem *base;
62 struct clk *clk;
63 int irq;
64 int irq_high;
65 void (*mx_irq_handler)(struct irq_desc *desc);
66 struct irq_domain *domain;
67 struct gpio_chip gc;
68 struct device *dev;
69 u32 both_edges;
70 struct mxc_gpio_reg_saved gpio_saved_reg;
71 bool power_off;
72 u32 wakeup_pads;
73 bool is_pad_wakeup;
74 u32 pad_type[32];
75 const struct mxc_gpio_hwdata *hwdata;
76 };
77
78 static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
79 .dr_reg = 0x1c,
80 .gdir_reg = 0x00,
81 .psr_reg = 0x24,
82 .icr1_reg = 0x28,
83 .icr2_reg = 0x2c,
84 .imr_reg = 0x30,
85 .isr_reg = 0x34,
86 .edge_sel_reg = -EINVAL,
87 .low_level = 0x03,
88 .high_level = 0x02,
89 .rise_edge = 0x00,
90 .fall_edge = 0x01,
91 };
92
93 static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
94 .dr_reg = 0x00,
95 .gdir_reg = 0x04,
96 .psr_reg = 0x08,
97 .icr1_reg = 0x0c,
98 .icr2_reg = 0x10,
99 .imr_reg = 0x14,
100 .isr_reg = 0x18,
101 .edge_sel_reg = -EINVAL,
102 .low_level = 0x00,
103 .high_level = 0x01,
104 .rise_edge = 0x02,
105 .fall_edge = 0x03,
106 };
107
108 static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
109 .dr_reg = 0x00,
110 .gdir_reg = 0x04,
111 .psr_reg = 0x08,
112 .icr1_reg = 0x0c,
113 .icr2_reg = 0x10,
114 .imr_reg = 0x14,
115 .isr_reg = 0x18,
116 .edge_sel_reg = 0x1c,
117 .low_level = 0x00,
118 .high_level = 0x01,
119 .rise_edge = 0x02,
120 .fall_edge = 0x03,
121 };
122
123 #define GPIO_DR (port->hwdata->dr_reg)
124 #define GPIO_GDIR (port->hwdata->gdir_reg)
125 #define GPIO_PSR (port->hwdata->psr_reg)
126 #define GPIO_ICR1 (port->hwdata->icr1_reg)
127 #define GPIO_ICR2 (port->hwdata->icr2_reg)
128 #define GPIO_IMR (port->hwdata->imr_reg)
129 #define GPIO_ISR (port->hwdata->isr_reg)
130 #define GPIO_EDGE_SEL (port->hwdata->edge_sel_reg)
131
132 #define GPIO_INT_LOW_LEV (port->hwdata->low_level)
133 #define GPIO_INT_HIGH_LEV (port->hwdata->high_level)
134 #define GPIO_INT_RISE_EDGE (port->hwdata->rise_edge)
135 #define GPIO_INT_FALL_EDGE (port->hwdata->fall_edge)
136 #define GPIO_INT_BOTH_EDGES 0x4
137
138 static const struct of_device_id mxc_gpio_dt_ids[] = {
139 { .compatible = "fsl,imx1-gpio", .data = &imx1_imx21_gpio_hwdata },
140 { .compatible = "fsl,imx21-gpio", .data = &imx1_imx21_gpio_hwdata },
141 { .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
142 { .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
143 { .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata },
144 { .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata },
145 { .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata },
146 { .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata },
147 { /* sentinel */ }
148 };
149 MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids);
150
151 /*
152 * MX2 has one interrupt *for all* gpio ports. The list is used
153 * to save the references to all ports, so that mx2_gpio_irq_handler
154 * can walk through all interrupt status registers.
155 */
156 static LIST_HEAD(mxc_gpio_ports);
157
158 /* Note: This driver assumes 32 GPIOs are handled in one register */
159
gpio_set_irq_type(struct irq_data * d,u32 type)160 static int gpio_set_irq_type(struct irq_data *d, u32 type)
161 {
162 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
163 struct mxc_gpio_port *port = gc->private;
164 unsigned long flags;
165 u32 bit, val;
166 u32 gpio_idx = d->hwirq;
167 int edge;
168 void __iomem *reg = port->base;
169
170 port->both_edges &= ~(1 << gpio_idx);
171 switch (type) {
172 case IRQ_TYPE_EDGE_RISING:
173 edge = GPIO_INT_RISE_EDGE;
174 break;
175 case IRQ_TYPE_EDGE_FALLING:
176 edge = GPIO_INT_FALL_EDGE;
177 break;
178 case IRQ_TYPE_EDGE_BOTH:
179 if (GPIO_EDGE_SEL >= 0) {
180 edge = GPIO_INT_BOTH_EDGES;
181 } else {
182 val = port->gc.get(&port->gc, gpio_idx);
183 if (val) {
184 edge = GPIO_INT_LOW_LEV;
185 pr_debug("mxc: set GPIO %d to low trigger\n", gpio_idx);
186 } else {
187 edge = GPIO_INT_HIGH_LEV;
188 pr_debug("mxc: set GPIO %d to high trigger\n", gpio_idx);
189 }
190 port->both_edges |= 1 << gpio_idx;
191 }
192 break;
193 case IRQ_TYPE_LEVEL_LOW:
194 edge = GPIO_INT_LOW_LEV;
195 break;
196 case IRQ_TYPE_LEVEL_HIGH:
197 edge = GPIO_INT_HIGH_LEV;
198 break;
199 default:
200 return -EINVAL;
201 }
202
203 raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);
204
205 if (GPIO_EDGE_SEL >= 0) {
206 val = readl(port->base + GPIO_EDGE_SEL);
207 if (edge == GPIO_INT_BOTH_EDGES)
208 writel(val | (1 << gpio_idx),
209 port->base + GPIO_EDGE_SEL);
210 else
211 writel(val & ~(1 << gpio_idx),
212 port->base + GPIO_EDGE_SEL);
213 }
214
215 if (edge != GPIO_INT_BOTH_EDGES) {
216 reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */
217 bit = gpio_idx & 0xf;
218 val = readl(reg) & ~(0x3 << (bit << 1));
219 writel(val | (edge << (bit << 1)), reg);
220 }
221
222 writel(1 << gpio_idx, port->base + GPIO_ISR);
223 port->pad_type[gpio_idx] = type;
224
225 raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
226
227 return port->gc.direction_input(&port->gc, gpio_idx);
228 }
229
mxc_flip_edge(struct mxc_gpio_port * port,u32 gpio)230 static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
231 {
232 void __iomem *reg = port->base;
233 unsigned long flags;
234 u32 bit, val;
235 int edge;
236
237 raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);
238
239 reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
240 bit = gpio & 0xf;
241 val = readl(reg);
242 edge = (val >> (bit << 1)) & 3;
243 val &= ~(0x3 << (bit << 1));
244 if (edge == GPIO_INT_HIGH_LEV) {
245 edge = GPIO_INT_LOW_LEV;
246 pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
247 } else if (edge == GPIO_INT_LOW_LEV) {
248 edge = GPIO_INT_HIGH_LEV;
249 pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
250 } else {
251 pr_err("mxc: invalid configuration for GPIO %d: %x\n",
252 gpio, edge);
253 goto unlock;
254 }
255 writel(val | (edge << (bit << 1)), reg);
256
257 unlock:
258 raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
259 }
260
261 /* handle 32 interrupts in one status register */
mxc_gpio_irq_handler(struct mxc_gpio_port * port,u32 irq_stat)262 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
263 {
264 while (irq_stat != 0) {
265 int irqoffset = fls(irq_stat) - 1;
266
267 if (port->both_edges & (1 << irqoffset))
268 mxc_flip_edge(port, irqoffset);
269
270 generic_handle_domain_irq(port->domain, irqoffset);
271
272 irq_stat &= ~(1 << irqoffset);
273 }
274 }
275
276 /* MX1 and MX3 has one interrupt *per* gpio port */
mx3_gpio_irq_handler(struct irq_desc * desc)277 static void mx3_gpio_irq_handler(struct irq_desc *desc)
278 {
279 u32 irq_stat;
280 struct mxc_gpio_port *port = irq_desc_get_handler_data(desc);
281 struct irq_chip *chip = irq_desc_get_chip(desc);
282
283 if (port->is_pad_wakeup)
284 return;
285
286 chained_irq_enter(chip, desc);
287
288 irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
289
290 mxc_gpio_irq_handler(port, irq_stat);
291
292 chained_irq_exit(chip, desc);
293 }
294
295 /* MX2 has one interrupt *for all* gpio ports */
mx2_gpio_irq_handler(struct irq_desc * desc)296 static void mx2_gpio_irq_handler(struct irq_desc *desc)
297 {
298 u32 irq_msk, irq_stat;
299 struct mxc_gpio_port *port;
300 struct irq_chip *chip = irq_desc_get_chip(desc);
301
302 chained_irq_enter(chip, desc);
303
304 /* walk through all interrupt status registers */
305 list_for_each_entry(port, &mxc_gpio_ports, node) {
306 irq_msk = readl(port->base + GPIO_IMR);
307 if (!irq_msk)
308 continue;
309
310 irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
311 if (irq_stat)
312 mxc_gpio_irq_handler(port, irq_stat);
313 }
314 chained_irq_exit(chip, desc);
315 }
316
317 /*
318 * Set interrupt number "irq" in the GPIO as a wake-up source.
319 * While system is running, all registered GPIO interrupts need to have
320 * wake-up enabled. When system is suspended, only selected GPIO interrupts
321 * need to have wake-up enabled.
322 * @param irq interrupt source number
323 * @param enable enable as wake-up if equal to non-zero
324 * @return This function returns 0 on success.
325 */
gpio_set_wake_irq(struct irq_data * d,u32 enable)326 static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
327 {
328 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
329 struct mxc_gpio_port *port = gc->private;
330 u32 gpio_idx = d->hwirq;
331 int ret;
332
333 if (enable) {
334 if (port->irq_high && (gpio_idx >= 16))
335 ret = enable_irq_wake(port->irq_high);
336 else
337 ret = enable_irq_wake(port->irq);
338 port->wakeup_pads |= (1 << gpio_idx);
339 } else {
340 if (port->irq_high && (gpio_idx >= 16))
341 ret = disable_irq_wake(port->irq_high);
342 else
343 ret = disable_irq_wake(port->irq);
344 port->wakeup_pads &= ~(1 << gpio_idx);
345 }
346
347 return ret;
348 }
349
mxc_gpio_init_gc(struct mxc_gpio_port * port,int irq_base)350 static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
351 {
352 struct irq_chip_generic *gc;
353 struct irq_chip_type *ct;
354 int rv;
355
356 gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxc", 1, irq_base,
357 port->base, handle_level_irq);
358 if (!gc)
359 return -ENOMEM;
360 gc->private = port;
361
362 ct = gc->chip_types;
363 ct->chip.irq_ack = irq_gc_ack_set_bit;
364 ct->chip.irq_mask = irq_gc_mask_clr_bit;
365 ct->chip.irq_unmask = irq_gc_mask_set_bit;
366 ct->chip.irq_set_type = gpio_set_irq_type;
367 ct->chip.irq_set_wake = gpio_set_wake_irq;
368 ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND;
369 ct->regs.ack = GPIO_ISR;
370 ct->regs.mask = GPIO_IMR;
371
372 rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32),
373 IRQ_GC_INIT_NESTED_LOCK,
374 IRQ_NOREQUEST, 0);
375
376 return rv;
377 }
378
mxc_gpio_to_irq(struct gpio_chip * gc,unsigned offset)379 static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
380 {
381 struct mxc_gpio_port *port = gpiochip_get_data(gc);
382
383 return irq_find_mapping(port->domain, offset);
384 }
385
mxc_gpio_request(struct gpio_chip * chip,unsigned int offset)386 static int mxc_gpio_request(struct gpio_chip *chip, unsigned int offset)
387 {
388 int ret;
389
390 ret = gpiochip_generic_request(chip, offset);
391 if (ret)
392 return ret;
393
394 return pm_runtime_resume_and_get(chip->parent);
395 }
396
mxc_gpio_free(struct gpio_chip * chip,unsigned int offset)397 static void mxc_gpio_free(struct gpio_chip *chip, unsigned int offset)
398 {
399 gpiochip_generic_free(chip, offset);
400 pm_runtime_put(chip->parent);
401 }
402
mxc_update_irq_chained_handler(struct mxc_gpio_port * port,bool enable)403 static void mxc_update_irq_chained_handler(struct mxc_gpio_port *port, bool enable)
404 {
405 if (enable)
406 irq_set_chained_handler_and_data(port->irq, port->mx_irq_handler, port);
407 else
408 irq_set_chained_handler_and_data(port->irq, NULL, NULL);
409
410 /* setup handler for GPIO 16 to 31 */
411 if (port->irq_high > 0) {
412 if (enable)
413 irq_set_chained_handler_and_data(port->irq_high,
414 port->mx_irq_handler,
415 port);
416 else
417 irq_set_chained_handler_and_data(port->irq_high, NULL, NULL);
418 }
419 }
420
mxc_gpio_probe(struct platform_device * pdev)421 static int mxc_gpio_probe(struct platform_device *pdev)
422 {
423 struct device_node *np = pdev->dev.of_node;
424 struct mxc_gpio_port *port;
425 int irq_count;
426 int irq_base;
427 int err;
428
429 port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
430 if (!port)
431 return -ENOMEM;
432
433 port->dev = &pdev->dev;
434 port->hwdata = device_get_match_data(&pdev->dev);
435
436 port->base = devm_platform_ioremap_resource(pdev, 0);
437 if (IS_ERR(port->base))
438 return PTR_ERR(port->base);
439
440 irq_count = platform_irq_count(pdev);
441 if (irq_count < 0)
442 return irq_count;
443
444 if (irq_count > 1) {
445 port->irq_high = platform_get_irq(pdev, 1);
446 if (port->irq_high < 0)
447 port->irq_high = 0;
448 }
449
450 port->irq = platform_get_irq(pdev, 0);
451 if (port->irq < 0)
452 return port->irq;
453
454 /* the controller clock is optional */
455 port->clk = devm_clk_get_optional_enabled(&pdev->dev, NULL);
456 if (IS_ERR(port->clk))
457 return PTR_ERR(port->clk);
458
459 if (of_device_is_compatible(np, "fsl,imx7d-gpio"))
460 port->power_off = true;
461
462 pm_runtime_get_noresume(&pdev->dev);
463 pm_runtime_set_active(&pdev->dev);
464 pm_runtime_enable(&pdev->dev);
465
466 /* disable the interrupt and clear the status */
467 writel(0, port->base + GPIO_IMR);
468 writel(~0, port->base + GPIO_ISR);
469
470 if (of_device_is_compatible(np, "fsl,imx21-gpio")) {
471 /*
472 * Setup one handler for all GPIO interrupts. Actually setting
473 * the handler is needed only once, but doing it for every port
474 * is more robust and easier.
475 */
476 port->irq_high = -1;
477 port->mx_irq_handler = mx2_gpio_irq_handler;
478 } else
479 port->mx_irq_handler = mx3_gpio_irq_handler;
480
481 mxc_update_irq_chained_handler(port, true);
482 err = bgpio_init(&port->gc, &pdev->dev, 4,
483 port->base + GPIO_PSR,
484 port->base + GPIO_DR, NULL,
485 port->base + GPIO_GDIR, NULL,
486 BGPIOF_READ_OUTPUT_REG_SET);
487 if (err)
488 goto out_bgio;
489
490 port->gc.request = mxc_gpio_request;
491 port->gc.free = mxc_gpio_free;
492 port->gc.to_irq = mxc_gpio_to_irq;
493 port->gc.base = of_alias_get_id(np, "gpio") * 32;
494
495 err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port);
496 if (err)
497 goto out_bgio;
498
499 irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
500 if (irq_base < 0) {
501 err = irq_base;
502 goto out_bgio;
503 }
504
505 port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
506 &irq_domain_simple_ops, NULL);
507 if (!port->domain) {
508 err = -ENODEV;
509 goto out_bgio;
510 }
511
512 irq_domain_set_pm_device(port->domain, &pdev->dev);
513
514 /* gpio-mxc can be a generic irq chip */
515 err = mxc_gpio_init_gc(port, irq_base);
516 if (err < 0)
517 goto out_irqdomain_remove;
518
519 list_add_tail(&port->node, &mxc_gpio_ports);
520
521 platform_set_drvdata(pdev, port);
522 pm_runtime_put_autosuspend(&pdev->dev);
523
524 return 0;
525
526 out_irqdomain_remove:
527 irq_domain_remove(port->domain);
528 out_bgio:
529 pm_runtime_disable(&pdev->dev);
530 pm_runtime_put_noidle(&pdev->dev);
531 dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
532 return err;
533 }
534
mxc_gpio_save_regs(struct mxc_gpio_port * port)535 static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
536 {
537 if (!port->power_off)
538 return;
539
540 port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1);
541 port->gpio_saved_reg.icr2 = readl(port->base + GPIO_ICR2);
542 port->gpio_saved_reg.imr = readl(port->base + GPIO_IMR);
543 port->gpio_saved_reg.gdir = readl(port->base + GPIO_GDIR);
544 port->gpio_saved_reg.edge_sel = readl(port->base + GPIO_EDGE_SEL);
545 port->gpio_saved_reg.dr = readl(port->base + GPIO_DR);
546 }
547
mxc_gpio_restore_regs(struct mxc_gpio_port * port)548 static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
549 {
550 if (!port->power_off)
551 return;
552
553 writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1);
554 writel(port->gpio_saved_reg.icr2, port->base + GPIO_ICR2);
555 writel(port->gpio_saved_reg.imr, port->base + GPIO_IMR);
556 writel(port->gpio_saved_reg.gdir, port->base + GPIO_GDIR);
557 writel(port->gpio_saved_reg.edge_sel, port->base + GPIO_EDGE_SEL);
558 writel(port->gpio_saved_reg.dr, port->base + GPIO_DR);
559 }
560
mxc_gpio_generic_config(struct mxc_gpio_port * port,unsigned int offset,unsigned long conf)561 static bool mxc_gpio_generic_config(struct mxc_gpio_port *port,
562 unsigned int offset, unsigned long conf)
563 {
564 struct device_node *np = port->dev->of_node;
565
566 if (of_device_is_compatible(np, "fsl,imx8dxl-gpio") ||
567 of_device_is_compatible(np, "fsl,imx8qxp-gpio") ||
568 of_device_is_compatible(np, "fsl,imx8qm-gpio"))
569 return (gpiochip_generic_config(&port->gc, offset, conf) == 0);
570
571 return false;
572 }
573
mxc_gpio_set_pad_wakeup(struct mxc_gpio_port * port,bool enable)574 static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
575 {
576 unsigned long config;
577 bool ret = false;
578 int i, type;
579
580 static const u32 pad_type_map[] = {
581 IMX_SCU_WAKEUP_OFF, /* 0 */
582 IMX_SCU_WAKEUP_RISE_EDGE, /* IRQ_TYPE_EDGE_RISING */
583 IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_FALLING */
584 IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_BOTH */
585 IMX_SCU_WAKEUP_HIGH_LVL, /* IRQ_TYPE_LEVEL_HIGH */
586 IMX_SCU_WAKEUP_OFF, /* 5 */
587 IMX_SCU_WAKEUP_OFF, /* 6 */
588 IMX_SCU_WAKEUP_OFF, /* 7 */
589 IMX_SCU_WAKEUP_LOW_LVL, /* IRQ_TYPE_LEVEL_LOW */
590 };
591
592 for (i = 0; i < 32; i++) {
593 if ((port->wakeup_pads & (1 << i))) {
594 type = port->pad_type[i];
595 if (enable)
596 config = pad_type_map[type];
597 else
598 config = IMX_SCU_WAKEUP_OFF;
599 ret |= mxc_gpio_generic_config(port, i, config);
600 }
601 }
602
603 return ret;
604 }
605
mxc_gpio_runtime_suspend(struct device * dev)606 static int mxc_gpio_runtime_suspend(struct device *dev)
607 {
608 struct mxc_gpio_port *port = dev_get_drvdata(dev);
609
610 mxc_gpio_save_regs(port);
611 clk_disable_unprepare(port->clk);
612 mxc_update_irq_chained_handler(port, false);
613
614 return 0;
615 }
616
mxc_gpio_runtime_resume(struct device * dev)617 static int mxc_gpio_runtime_resume(struct device *dev)
618 {
619 struct mxc_gpio_port *port = dev_get_drvdata(dev);
620 int ret;
621
622 mxc_update_irq_chained_handler(port, true);
623 ret = clk_prepare_enable(port->clk);
624 if (ret) {
625 mxc_update_irq_chained_handler(port, false);
626 return ret;
627 }
628
629 mxc_gpio_restore_regs(port);
630
631 return 0;
632 }
633
mxc_gpio_noirq_suspend(struct device * dev)634 static int mxc_gpio_noirq_suspend(struct device *dev)
635 {
636 struct platform_device *pdev = to_platform_device(dev);
637 struct mxc_gpio_port *port = platform_get_drvdata(pdev);
638
639 if (port->wakeup_pads > 0)
640 port->is_pad_wakeup = mxc_gpio_set_pad_wakeup(port, true);
641
642 return 0;
643 }
644
mxc_gpio_noirq_resume(struct device * dev)645 static int mxc_gpio_noirq_resume(struct device *dev)
646 {
647 struct platform_device *pdev = to_platform_device(dev);
648 struct mxc_gpio_port *port = platform_get_drvdata(pdev);
649
650 if (port->wakeup_pads > 0)
651 mxc_gpio_set_pad_wakeup(port, false);
652 port->is_pad_wakeup = false;
653
654 return 0;
655 }
656
657 static const struct dev_pm_ops mxc_gpio_dev_pm_ops = {
658 NOIRQ_SYSTEM_SLEEP_PM_OPS(mxc_gpio_noirq_suspend, mxc_gpio_noirq_resume)
659 RUNTIME_PM_OPS(mxc_gpio_runtime_suspend, mxc_gpio_runtime_resume, NULL)
660 };
661
mxc_gpio_syscore_suspend(void)662 static int mxc_gpio_syscore_suspend(void)
663 {
664 struct mxc_gpio_port *port;
665 int ret;
666
667 /* walk through all ports */
668 list_for_each_entry(port, &mxc_gpio_ports, node) {
669 ret = clk_prepare_enable(port->clk);
670 if (ret)
671 return ret;
672 mxc_gpio_save_regs(port);
673 clk_disable_unprepare(port->clk);
674 }
675
676 return 0;
677 }
678
mxc_gpio_syscore_resume(void)679 static void mxc_gpio_syscore_resume(void)
680 {
681 struct mxc_gpio_port *port;
682 int ret;
683
684 /* walk through all ports */
685 list_for_each_entry(port, &mxc_gpio_ports, node) {
686 ret = clk_prepare_enable(port->clk);
687 if (ret) {
688 pr_err("mxc: failed to enable gpio clock %d\n", ret);
689 return;
690 }
691 mxc_gpio_restore_regs(port);
692 clk_disable_unprepare(port->clk);
693 }
694 }
695
696 static struct syscore_ops mxc_gpio_syscore_ops = {
697 .suspend = mxc_gpio_syscore_suspend,
698 .resume = mxc_gpio_syscore_resume,
699 };
700
701 static struct platform_driver mxc_gpio_driver = {
702 .driver = {
703 .name = "gpio-mxc",
704 .of_match_table = mxc_gpio_dt_ids,
705 .suppress_bind_attrs = true,
706 .pm = pm_ptr(&mxc_gpio_dev_pm_ops),
707 },
708 .probe = mxc_gpio_probe,
709 };
710
gpio_mxc_init(void)711 static int __init gpio_mxc_init(void)
712 {
713 register_syscore_ops(&mxc_gpio_syscore_ops);
714
715 return platform_driver_register(&mxc_gpio_driver);
716 }
717 subsys_initcall(gpio_mxc_init);
718
719 MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
720 MODULE_DESCRIPTION("i.MX GPIO Driver");
721 MODULE_LICENSE("GPL");
722