xref: /openbmc/linux/drivers/net/dsa/mv88e6060.c (revision 479b322e)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
4  * Copyright (c) 2008-2009 Marvell Semiconductor
5  */
6 
7 #include <linux/delay.h>
8 #include <linux/etherdevice.h>
9 #include <linux/jiffies.h>
10 #include <linux/list.h>
11 #include <linux/module.h>
12 #include <linux/netdevice.h>
13 #include <linux/phy.h>
14 #include <net/dsa.h>
15 #include "mv88e6060.h"
16 
reg_read(struct mv88e6060_priv * priv,int addr,int reg)17 static int reg_read(struct mv88e6060_priv *priv, int addr, int reg)
18 {
19 	return mdiobus_read_nested(priv->bus, priv->sw_addr + addr, reg);
20 }
21 
reg_write(struct mv88e6060_priv * priv,int addr,int reg,u16 val)22 static int reg_write(struct mv88e6060_priv *priv, int addr, int reg, u16 val)
23 {
24 	return mdiobus_write_nested(priv->bus, priv->sw_addr + addr, reg, val);
25 }
26 
mv88e6060_get_name(struct mii_bus * bus,int sw_addr)27 static const char *mv88e6060_get_name(struct mii_bus *bus, int sw_addr)
28 {
29 	int ret;
30 
31 	ret = mdiobus_read(bus, sw_addr + REG_PORT(0), PORT_SWITCH_ID);
32 	if (ret >= 0) {
33 		if (ret == PORT_SWITCH_ID_6060)
34 			return "Marvell 88E6060 (A0)";
35 		if (ret == PORT_SWITCH_ID_6060_R1 ||
36 		    ret == PORT_SWITCH_ID_6060_R2)
37 			return "Marvell 88E6060 (B0)";
38 		if ((ret & PORT_SWITCH_ID_6060_MASK) == PORT_SWITCH_ID_6060)
39 			return "Marvell 88E6060";
40 	}
41 
42 	return NULL;
43 }
44 
mv88e6060_get_tag_protocol(struct dsa_switch * ds,int port,enum dsa_tag_protocol m)45 static enum dsa_tag_protocol mv88e6060_get_tag_protocol(struct dsa_switch *ds,
46 							int port,
47 							enum dsa_tag_protocol m)
48 {
49 	return DSA_TAG_PROTO_TRAILER;
50 }
51 
mv88e6060_switch_reset(struct mv88e6060_priv * priv)52 static int mv88e6060_switch_reset(struct mv88e6060_priv *priv)
53 {
54 	int i;
55 	int ret;
56 	unsigned long timeout;
57 
58 	/* Set all ports to the disabled state. */
59 	for (i = 0; i < MV88E6060_PORTS; i++) {
60 		ret = reg_read(priv, REG_PORT(i), PORT_CONTROL);
61 		if (ret < 0)
62 			return ret;
63 		ret = reg_write(priv, REG_PORT(i), PORT_CONTROL,
64 				ret & ~PORT_CONTROL_STATE_MASK);
65 		if (ret)
66 			return ret;
67 	}
68 
69 	/* Wait for transmit queues to drain. */
70 	usleep_range(2000, 4000);
71 
72 	/* Reset the switch. */
73 	ret = reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
74 			GLOBAL_ATU_CONTROL_SWRESET |
75 			GLOBAL_ATU_CONTROL_LEARNDIS);
76 	if (ret)
77 		return ret;
78 
79 	/* Wait up to one second for reset to complete. */
80 	timeout = jiffies + 1 * HZ;
81 	while (time_before(jiffies, timeout)) {
82 		ret = reg_read(priv, REG_GLOBAL, GLOBAL_STATUS);
83 		if (ret < 0)
84 			return ret;
85 
86 		if (ret & GLOBAL_STATUS_INIT_READY)
87 			break;
88 
89 		usleep_range(1000, 2000);
90 	}
91 	if (time_after(jiffies, timeout))
92 		return -ETIMEDOUT;
93 
94 	return 0;
95 }
96 
mv88e6060_setup_global(struct mv88e6060_priv * priv)97 static int mv88e6060_setup_global(struct mv88e6060_priv *priv)
98 {
99 	int ret;
100 
101 	/* Disable discarding of frames with excessive collisions,
102 	 * set the maximum frame size to 1536 bytes, and mask all
103 	 * interrupt sources.
104 	 */
105 	ret = reg_write(priv, REG_GLOBAL, GLOBAL_CONTROL,
106 			GLOBAL_CONTROL_MAX_FRAME_1536);
107 	if (ret)
108 		return ret;
109 
110 	/* Disable automatic address learning.
111 	 */
112 	return reg_write(priv, REG_GLOBAL, GLOBAL_ATU_CONTROL,
113 			 GLOBAL_ATU_CONTROL_LEARNDIS);
114 }
115 
mv88e6060_setup_port(struct mv88e6060_priv * priv,int p)116 static int mv88e6060_setup_port(struct mv88e6060_priv *priv, int p)
117 {
118 	int addr = REG_PORT(p);
119 	int ret;
120 
121 	if (dsa_is_unused_port(priv->ds, p))
122 		return 0;
123 
124 	/* Do not force flow control, disable Ingress and Egress
125 	 * Header tagging, disable VLAN tunneling, and set the port
126 	 * state to Forwarding.  Additionally, if this is the CPU
127 	 * port, enable Ingress and Egress Trailer tagging mode.
128 	 */
129 	ret = reg_write(priv, addr, PORT_CONTROL,
130 			dsa_is_cpu_port(priv->ds, p) ?
131 			PORT_CONTROL_TRAILER |
132 			PORT_CONTROL_INGRESS_MODE |
133 			PORT_CONTROL_STATE_FORWARDING :
134 			PORT_CONTROL_STATE_FORWARDING);
135 	if (ret)
136 		return ret;
137 
138 	/* Port based VLAN map: give each port its own address
139 	 * database, allow the CPU port to talk to each of the 'real'
140 	 * ports, and allow each of the 'real' ports to only talk to
141 	 * the CPU port.
142 	 */
143 	ret = reg_write(priv, addr, PORT_VLAN_MAP,
144 			((p & 0xf) << PORT_VLAN_MAP_DBNUM_SHIFT) |
145 			(dsa_is_cpu_port(priv->ds, p) ?
146 			 dsa_user_ports(priv->ds) :
147 			 BIT(dsa_to_port(priv->ds, p)->cpu_dp->index)));
148 	if (ret)
149 		return ret;
150 
151 	/* Port Association Vector: when learning source addresses
152 	 * of packets, add the address to the address database using
153 	 * a port bitmap that has only the bit for this port set and
154 	 * the other bits clear.
155 	 */
156 	return reg_write(priv, addr, PORT_ASSOC_VECTOR, BIT(p));
157 }
158 
mv88e6060_setup_addr(struct mv88e6060_priv * priv)159 static int mv88e6060_setup_addr(struct mv88e6060_priv *priv)
160 {
161 	u8 addr[ETH_ALEN];
162 	int ret;
163 	u16 val;
164 
165 	eth_random_addr(addr);
166 
167 	val = addr[0] << 8 | addr[1];
168 
169 	/* The multicast bit is always transmitted as a zero, so the switch uses
170 	 * bit 8 for "DiffAddr", where 0 means all ports transmit the same SA.
171 	 */
172 	val &= 0xfeff;
173 
174 	ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_01, val);
175 	if (ret)
176 		return ret;
177 
178 	ret = reg_write(priv, REG_GLOBAL, GLOBAL_MAC_23,
179 			(addr[2] << 8) | addr[3]);
180 	if (ret)
181 		return ret;
182 
183 	return reg_write(priv, REG_GLOBAL, GLOBAL_MAC_45,
184 			 (addr[4] << 8) | addr[5]);
185 }
186 
mv88e6060_setup(struct dsa_switch * ds)187 static int mv88e6060_setup(struct dsa_switch *ds)
188 {
189 	struct mv88e6060_priv *priv = ds->priv;
190 	int ret;
191 	int i;
192 
193 	priv->ds = ds;
194 
195 	ret = mv88e6060_switch_reset(priv);
196 	if (ret < 0)
197 		return ret;
198 
199 	/* @@@ initialise atu */
200 
201 	ret = mv88e6060_setup_global(priv);
202 	if (ret < 0)
203 		return ret;
204 
205 	ret = mv88e6060_setup_addr(priv);
206 	if (ret < 0)
207 		return ret;
208 
209 	for (i = 0; i < MV88E6060_PORTS; i++) {
210 		ret = mv88e6060_setup_port(priv, i);
211 		if (ret < 0)
212 			return ret;
213 	}
214 
215 	return 0;
216 }
217 
mv88e6060_port_to_phy_addr(int port)218 static int mv88e6060_port_to_phy_addr(int port)
219 {
220 	if (port >= 0 && port < MV88E6060_PORTS)
221 		return port;
222 	return -1;
223 }
224 
mv88e6060_phy_read(struct dsa_switch * ds,int port,int regnum)225 static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
226 {
227 	struct mv88e6060_priv *priv = ds->priv;
228 	int addr;
229 
230 	addr = mv88e6060_port_to_phy_addr(port);
231 	if (addr == -1)
232 		return 0xffff;
233 
234 	return reg_read(priv, addr, regnum);
235 }
236 
237 static int
mv88e6060_phy_write(struct dsa_switch * ds,int port,int regnum,u16 val)238 mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
239 {
240 	struct mv88e6060_priv *priv = ds->priv;
241 	int addr;
242 
243 	addr = mv88e6060_port_to_phy_addr(port);
244 	if (addr == -1)
245 		return 0xffff;
246 
247 	return reg_write(priv, addr, regnum, val);
248 }
249 
mv88e6060_phylink_get_caps(struct dsa_switch * ds,int port,struct phylink_config * config)250 static void mv88e6060_phylink_get_caps(struct dsa_switch *ds, int port,
251 				       struct phylink_config *config)
252 {
253 	unsigned long *interfaces = config->supported_interfaces;
254 	struct mv88e6060_priv *priv = ds->priv;
255 	int addr = REG_PORT(port);
256 	int ret;
257 
258 	ret = reg_read(priv, addr, PORT_STATUS);
259 	if (ret < 0) {
260 		dev_err(ds->dev,
261 			"port %d: unable to read status register: %pe\n",
262 			port, ERR_PTR(ret));
263 		return;
264 	}
265 
266 	/* If the port is configured in SNI mode (acts as a 10Mbps PHY),
267 	 * it should have phy-mode = "sni", but that doesn't yet exist, so
268 	 * forcibly fail validation until the need arises to introduce it.
269 	 */
270 	if (!(ret & PORT_STATUS_PORTMODE)) {
271 		dev_warn(ds->dev, "port %d: SNI mode not supported\n", port);
272 		return;
273 	}
274 
275 	config->mac_capabilities = MAC_100 | MAC_10 | MAC_SYM_PAUSE;
276 
277 	if (port >= 4) {
278 		/* Ports 4 and 5 can support MII, REVMII and REVRMII modes */
279 		__set_bit(PHY_INTERFACE_MODE_MII, interfaces);
280 		__set_bit(PHY_INTERFACE_MODE_REVMII, interfaces);
281 		__set_bit(PHY_INTERFACE_MODE_REVRMII, interfaces);
282 	}
283 	if (port <= 4) {
284 		/* Ports 0 to 3 have internal PHYs, and port 4 can optionally
285 		 * use an internal PHY.
286 		 */
287 		/* Internal PHY */
288 		__set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces);
289 		/* Default phylib interface mode */
290 		__set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
291 	}
292 }
293 
294 static const struct dsa_switch_ops mv88e6060_switch_ops = {
295 	.get_tag_protocol = mv88e6060_get_tag_protocol,
296 	.setup		= mv88e6060_setup,
297 	.phy_read	= mv88e6060_phy_read,
298 	.phy_write	= mv88e6060_phy_write,
299 	.phylink_get_caps = mv88e6060_phylink_get_caps,
300 };
301 
mv88e6060_probe(struct mdio_device * mdiodev)302 static int mv88e6060_probe(struct mdio_device *mdiodev)
303 {
304 	struct device *dev = &mdiodev->dev;
305 	struct mv88e6060_priv *priv;
306 	struct dsa_switch *ds;
307 	const char *name;
308 
309 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
310 	if (!priv)
311 		return -ENOMEM;
312 
313 	priv->bus = mdiodev->bus;
314 	priv->sw_addr = mdiodev->addr;
315 
316 	name = mv88e6060_get_name(priv->bus, priv->sw_addr);
317 	if (!name)
318 		return -ENODEV;
319 
320 	dev_info(dev, "switch %s detected\n", name);
321 
322 	ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
323 	if (!ds)
324 		return -ENOMEM;
325 
326 	ds->dev = dev;
327 	ds->num_ports = MV88E6060_PORTS;
328 	ds->priv = priv;
329 	ds->dev = dev;
330 	ds->ops = &mv88e6060_switch_ops;
331 
332 	dev_set_drvdata(dev, ds);
333 
334 	return dsa_register_switch(ds);
335 }
336 
mv88e6060_remove(struct mdio_device * mdiodev)337 static void mv88e6060_remove(struct mdio_device *mdiodev)
338 {
339 	struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
340 
341 	if (!ds)
342 		return;
343 
344 	dsa_unregister_switch(ds);
345 }
346 
mv88e6060_shutdown(struct mdio_device * mdiodev)347 static void mv88e6060_shutdown(struct mdio_device *mdiodev)
348 {
349 	struct dsa_switch *ds = dev_get_drvdata(&mdiodev->dev);
350 
351 	if (!ds)
352 		return;
353 
354 	dsa_switch_shutdown(ds);
355 
356 	dev_set_drvdata(&mdiodev->dev, NULL);
357 }
358 
359 static const struct of_device_id mv88e6060_of_match[] = {
360 	{
361 		.compatible = "marvell,mv88e6060",
362 	},
363 	{ /* sentinel */ },
364 };
365 
366 static struct mdio_driver mv88e6060_driver = {
367 	.probe	= mv88e6060_probe,
368 	.remove = mv88e6060_remove,
369 	.shutdown = mv88e6060_shutdown,
370 	.mdiodrv.driver = {
371 		.name = "mv88e6060",
372 		.of_match_table = mv88e6060_of_match,
373 	},
374 };
375 
376 mdio_module_driver(mv88e6060_driver);
377 
378 MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>");
379 MODULE_DESCRIPTION("Driver for Marvell 88E6060 ethernet switch chip");
380 MODULE_LICENSE("GPL");
381 MODULE_ALIAS("platform:mv88e6060");
382