1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * mtu3_gadget_ep0.c - MediaTek USB3 DRD peripheral driver ep0 handling
4  *
5  * Copyright (c) 2016 MediaTek Inc.
6  *
7  * Author:  Chunfeng.Yun <chunfeng.yun@mediatek.com>
8  */
9 
10 #include <linux/iopoll.h>
11 #include <linux/usb/composite.h>
12 
13 #include "mtu3.h"
14 #include "mtu3_debug.h"
15 #include "mtu3_trace.h"
16 
17 /* ep0 is always mtu3->in_eps[0] */
18 #define	next_ep0_request(mtu)	next_request((mtu)->ep0)
19 
20 /* for high speed test mode; see USB 2.0 spec 7.1.20 */
21 static const u8 mtu3_test_packet[53] = {
22 	/* implicit SYNC then DATA0 to start */
23 
24 	/* JKJKJKJK x9 */
25 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
26 	/* JJKKJJKK x8 */
27 	0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa, 0xaa,
28 	/* JJJJKKKK x8 */
29 	0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee, 0xee,
30 	/* JJJJJJJKKKKKKK x8 */
31 	0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
32 	/* JJJJJJJK x8 */
33 	0x7f, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd,
34 	/* JKKKKKKK x10, JK */
35 	0xfc, 0x7e, 0xbf, 0xdf, 0xef, 0xf7, 0xfb, 0xfd, 0x7e,
36 	/* implicit CRC16 then EOP to end */
37 };
38 
decode_ep0_state(struct mtu3 * mtu)39 static char *decode_ep0_state(struct mtu3 *mtu)
40 {
41 	switch (mtu->ep0_state) {
42 	case MU3D_EP0_STATE_SETUP:
43 		return "SETUP";
44 	case MU3D_EP0_STATE_TX:
45 		return "IN";
46 	case MU3D_EP0_STATE_RX:
47 		return "OUT";
48 	case MU3D_EP0_STATE_TX_END:
49 		return "TX-END";
50 	case MU3D_EP0_STATE_STALL:
51 		return "STALL";
52 	default:
53 		return "??";
54 	}
55 }
56 
ep0_req_giveback(struct mtu3 * mtu,struct usb_request * req)57 static void ep0_req_giveback(struct mtu3 *mtu, struct usb_request *req)
58 {
59 	mtu3_req_complete(mtu->ep0, req, 0);
60 }
61 
62 static int
forward_to_driver(struct mtu3 * mtu,const struct usb_ctrlrequest * setup)63 forward_to_driver(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
64 __releases(mtu->lock)
65 __acquires(mtu->lock)
66 {
67 	int ret;
68 
69 	if (!mtu->gadget_driver || !mtu->async_callbacks)
70 		return -EOPNOTSUPP;
71 
72 	spin_unlock(&mtu->lock);
73 	ret = mtu->gadget_driver->setup(&mtu->g, setup);
74 	spin_lock(&mtu->lock);
75 
76 	dev_dbg(mtu->dev, "%s ret %d\n", __func__, ret);
77 	return ret;
78 }
79 
ep0_write_fifo(struct mtu3_ep * mep,const u8 * src,u16 len)80 static void ep0_write_fifo(struct mtu3_ep *mep, const u8 *src, u16 len)
81 {
82 	void __iomem *fifo = mep->mtu->mac_base + U3D_FIFO0;
83 	u16 index = 0;
84 
85 	dev_dbg(mep->mtu->dev, "%s: ep%din, len=%d, buf=%p\n",
86 		__func__, mep->epnum, len, src);
87 
88 	if (len >= 4) {
89 		iowrite32_rep(fifo, src, len >> 2);
90 		index = len & ~0x03;
91 	}
92 	if (len & 0x02) {
93 		writew(*(u16 *)&src[index], fifo);
94 		index += 2;
95 	}
96 	if (len & 0x01)
97 		writeb(src[index], fifo);
98 }
99 
ep0_read_fifo(struct mtu3_ep * mep,u8 * dst,u16 len)100 static void ep0_read_fifo(struct mtu3_ep *mep, u8 *dst, u16 len)
101 {
102 	void __iomem *fifo = mep->mtu->mac_base + U3D_FIFO0;
103 	u32 value;
104 	u16 index = 0;
105 
106 	dev_dbg(mep->mtu->dev, "%s: ep%dout len=%d buf=%p\n",
107 		 __func__, mep->epnum, len, dst);
108 
109 	if (len >= 4) {
110 		ioread32_rep(fifo, dst, len >> 2);
111 		index = len & ~0x03;
112 	}
113 	if (len & 0x3) {
114 		value = readl(fifo);
115 		memcpy(&dst[index], &value, len & 0x3);
116 	}
117 
118 }
119 
ep0_load_test_packet(struct mtu3 * mtu)120 static void ep0_load_test_packet(struct mtu3 *mtu)
121 {
122 	/*
123 	 * because the length of test packet is less than max packet of HS ep0,
124 	 * write it into fifo directly.
125 	 */
126 	ep0_write_fifo(mtu->ep0, mtu3_test_packet, sizeof(mtu3_test_packet));
127 }
128 
129 /*
130  * A. send STALL for setup transfer without data stage:
131  *		set SENDSTALL and SETUPPKTRDY at the same time;
132  * B. send STALL for other cases:
133  *		set SENDSTALL only.
134  */
ep0_stall_set(struct mtu3_ep * mep0,bool set,u32 pktrdy)135 static void ep0_stall_set(struct mtu3_ep *mep0, bool set, u32 pktrdy)
136 {
137 	struct mtu3 *mtu = mep0->mtu;
138 	void __iomem *mbase = mtu->mac_base;
139 	u32 csr;
140 
141 	/* EP0_SENTSTALL is W1C */
142 	csr = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
143 	if (set)
144 		csr |= EP0_SENDSTALL | pktrdy;
145 	else
146 		csr = (csr & ~EP0_SENDSTALL) | EP0_SENTSTALL;
147 	mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr);
148 
149 	mtu->delayed_status = false;
150 	mtu->ep0_state = MU3D_EP0_STATE_SETUP;
151 
152 	dev_dbg(mtu->dev, "ep0: %s STALL, ep0_state: %s\n",
153 		set ? "SEND" : "CLEAR", decode_ep0_state(mtu));
154 }
155 
ep0_do_status_stage(struct mtu3 * mtu)156 static void ep0_do_status_stage(struct mtu3 *mtu)
157 {
158 	void __iomem *mbase = mtu->mac_base;
159 	u32 value;
160 
161 	value = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
162 	mtu3_writel(mbase, U3D_EP0CSR, value | EP0_SETUPPKTRDY | EP0_DATAEND);
163 }
164 
165 static int ep0_queue(struct mtu3_ep *mep0, struct mtu3_request *mreq);
166 
ep0_dummy_complete(struct usb_ep * ep,struct usb_request * req)167 static void ep0_dummy_complete(struct usb_ep *ep, struct usb_request *req)
168 {}
169 
ep0_set_sel_complete(struct usb_ep * ep,struct usb_request * req)170 static void ep0_set_sel_complete(struct usb_ep *ep, struct usb_request *req)
171 {
172 	struct mtu3_request *mreq;
173 	struct mtu3 *mtu;
174 	struct usb_set_sel_req sel;
175 
176 	memcpy(&sel, req->buf, sizeof(sel));
177 
178 	mreq = to_mtu3_request(req);
179 	mtu = mreq->mtu;
180 	dev_dbg(mtu->dev, "u1sel:%d, u1pel:%d, u2sel:%d, u2pel:%d\n",
181 		sel.u1_sel, sel.u1_pel, sel.u2_sel, sel.u2_pel);
182 }
183 
184 /* queue data stage to handle 6 byte SET_SEL request */
ep0_set_sel(struct mtu3 * mtu,struct usb_ctrlrequest * setup)185 static int ep0_set_sel(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
186 {
187 	int ret;
188 	u16 length = le16_to_cpu(setup->wLength);
189 
190 	if (unlikely(length != 6)) {
191 		dev_err(mtu->dev, "%s wrong wLength:%d\n",
192 			__func__, length);
193 		return -EINVAL;
194 	}
195 
196 	mtu->ep0_req.mep = mtu->ep0;
197 	mtu->ep0_req.request.length = 6;
198 	mtu->ep0_req.request.buf = mtu->setup_buf;
199 	mtu->ep0_req.request.complete = ep0_set_sel_complete;
200 	ret = ep0_queue(mtu->ep0, &mtu->ep0_req);
201 
202 	return ret < 0 ? ret : 1;
203 }
204 
205 static int
ep0_get_status(struct mtu3 * mtu,const struct usb_ctrlrequest * setup)206 ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
207 {
208 	struct mtu3_ep *mep = NULL;
209 	int handled = 1;
210 	u8 result[2] = {0, 0};
211 	u8 epnum = 0;
212 	int is_in;
213 
214 	switch (setup->bRequestType & USB_RECIP_MASK) {
215 	case USB_RECIP_DEVICE:
216 		result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;
217 		result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
218 
219 		if (mtu->g.speed >= USB_SPEED_SUPER) {
220 			result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;
221 			result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;
222 		}
223 
224 		dev_dbg(mtu->dev, "%s result=%x, U1=%x, U2=%x\n", __func__,
225 			result[0], mtu->u1_enable, mtu->u2_enable);
226 
227 		break;
228 	case USB_RECIP_INTERFACE:
229 		/* status of function remote wakeup, forward request */
230 		handled = 0;
231 		break;
232 	case USB_RECIP_ENDPOINT:
233 		epnum = (u8) le16_to_cpu(setup->wIndex);
234 		is_in = epnum & USB_DIR_IN;
235 		epnum &= USB_ENDPOINT_NUMBER_MASK;
236 
237 		if (epnum >= mtu->num_eps) {
238 			handled = -EINVAL;
239 			break;
240 		}
241 		if (!epnum)
242 			break;
243 
244 		mep = (is_in ? mtu->in_eps : mtu->out_eps) + epnum;
245 		if (!mep->desc) {
246 			handled = -EINVAL;
247 			break;
248 		}
249 		if (mep->flags & MTU3_EP_STALL)
250 			result[0] |= 1 << USB_ENDPOINT_HALT;
251 
252 		break;
253 	default:
254 		/* class, vendor, etc ... delegate */
255 		handled = 0;
256 		break;
257 	}
258 
259 	if (handled > 0) {
260 		int ret;
261 
262 		/* prepare a data stage for GET_STATUS */
263 		dev_dbg(mtu->dev, "get_status=%x\n", *(u16 *)result);
264 		memcpy(mtu->setup_buf, result, sizeof(result));
265 		mtu->ep0_req.mep = mtu->ep0;
266 		mtu->ep0_req.request.length = 2;
267 		mtu->ep0_req.request.buf = &mtu->setup_buf;
268 		mtu->ep0_req.request.complete = ep0_dummy_complete;
269 		ret = ep0_queue(mtu->ep0, &mtu->ep0_req);
270 		if (ret < 0)
271 			handled = ret;
272 	}
273 	return handled;
274 }
275 
handle_test_mode(struct mtu3 * mtu,struct usb_ctrlrequest * setup)276 static int handle_test_mode(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
277 {
278 	void __iomem *mbase = mtu->mac_base;
279 	int handled = 1;
280 	u32 value;
281 
282 	switch (le16_to_cpu(setup->wIndex) >> 8) {
283 	case USB_TEST_J:
284 		dev_dbg(mtu->dev, "USB_TEST_J\n");
285 		mtu->test_mode_nr = TEST_J_MODE;
286 		break;
287 	case USB_TEST_K:
288 		dev_dbg(mtu->dev, "USB_TEST_K\n");
289 		mtu->test_mode_nr = TEST_K_MODE;
290 		break;
291 	case USB_TEST_SE0_NAK:
292 		dev_dbg(mtu->dev, "USB_TEST_SE0_NAK\n");
293 		mtu->test_mode_nr = TEST_SE0_NAK_MODE;
294 		break;
295 	case USB_TEST_PACKET:
296 		dev_dbg(mtu->dev, "USB_TEST_PACKET\n");
297 		mtu->test_mode_nr = TEST_PACKET_MODE;
298 		break;
299 	default:
300 		handled = -EINVAL;
301 		goto out;
302 	}
303 
304 	mtu->test_mode = true;
305 
306 	/* no TX completion interrupt, and need restart platform after test */
307 	if (mtu->test_mode_nr == TEST_PACKET_MODE)
308 		ep0_load_test_packet(mtu);
309 
310 	/* send status before entering test mode. */
311 	ep0_do_status_stage(mtu);
312 
313 	/* wait for ACK status sent by host */
314 	readl_poll_timeout_atomic(mbase + U3D_EP0CSR, value,
315 			!(value & EP0_DATAEND), 100, 5000);
316 
317 	mtu3_writel(mbase, U3D_USB2_TEST_MODE, mtu->test_mode_nr);
318 
319 	mtu->ep0_state = MU3D_EP0_STATE_SETUP;
320 
321 out:
322 	return handled;
323 }
324 
ep0_handle_feature_dev(struct mtu3 * mtu,struct usb_ctrlrequest * setup,bool set)325 static int ep0_handle_feature_dev(struct mtu3 *mtu,
326 		struct usb_ctrlrequest *setup, bool set)
327 {
328 	void __iomem *mbase = mtu->mac_base;
329 	int handled = -EINVAL;
330 	u32 lpc;
331 
332 	switch (le16_to_cpu(setup->wValue)) {
333 	case USB_DEVICE_REMOTE_WAKEUP:
334 		mtu->may_wakeup = !!set;
335 		handled = 1;
336 		break;
337 	case USB_DEVICE_TEST_MODE:
338 		if (!set || (mtu->g.speed != USB_SPEED_HIGH) ||
339 			(le16_to_cpu(setup->wIndex) & 0xff))
340 			break;
341 
342 		handled = handle_test_mode(mtu, setup);
343 		break;
344 	case USB_DEVICE_U1_ENABLE:
345 		if (mtu->g.speed < USB_SPEED_SUPER ||
346 		    mtu->g.state != USB_STATE_CONFIGURED)
347 			break;
348 
349 		lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
350 		if (set)
351 			lpc |= SW_U1_REQUEST_ENABLE;
352 		else
353 			lpc &= ~SW_U1_REQUEST_ENABLE;
354 		mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
355 
356 		mtu->u1_enable = !!set;
357 		handled = 1;
358 		break;
359 	case USB_DEVICE_U2_ENABLE:
360 		if (mtu->g.speed < USB_SPEED_SUPER ||
361 		    mtu->g.state != USB_STATE_CONFIGURED)
362 			break;
363 
364 		lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
365 		if (set)
366 			lpc |= SW_U2_REQUEST_ENABLE;
367 		else
368 			lpc &= ~SW_U2_REQUEST_ENABLE;
369 		mtu3_writel(mbase, U3D_LINK_POWER_CONTROL, lpc);
370 
371 		mtu->u2_enable = !!set;
372 		handled = 1;
373 		break;
374 	default:
375 		handled = -EINVAL;
376 		break;
377 	}
378 	return handled;
379 }
380 
ep0_handle_feature(struct mtu3 * mtu,struct usb_ctrlrequest * setup,bool set)381 static int ep0_handle_feature(struct mtu3 *mtu,
382 		struct usb_ctrlrequest *setup, bool set)
383 {
384 	struct mtu3_ep *mep;
385 	int handled = -EINVAL;
386 	int is_in;
387 	u16 value;
388 	u16 index;
389 	u8 epnum;
390 
391 	value = le16_to_cpu(setup->wValue);
392 	index = le16_to_cpu(setup->wIndex);
393 
394 	switch (setup->bRequestType & USB_RECIP_MASK) {
395 	case USB_RECIP_DEVICE:
396 		handled = ep0_handle_feature_dev(mtu, setup, set);
397 		break;
398 	case USB_RECIP_INTERFACE:
399 		/* superspeed only */
400 		if (value == USB_INTRF_FUNC_SUSPEND &&
401 		    mtu->g.speed >= USB_SPEED_SUPER) {
402 			/* forward the request for function suspend */
403 			mtu->may_wakeup = !!(index & USB_INTRF_FUNC_SUSPEND_RW);
404 			handled = 0;
405 		}
406 		break;
407 	case USB_RECIP_ENDPOINT:
408 		epnum = index & USB_ENDPOINT_NUMBER_MASK;
409 		if (epnum == 0 || epnum >= mtu->num_eps ||
410 			value != USB_ENDPOINT_HALT)
411 			break;
412 
413 		is_in = index & USB_DIR_IN;
414 		mep = (is_in ? mtu->in_eps : mtu->out_eps) + epnum;
415 		if (!mep->desc)
416 			break;
417 
418 		handled = 1;
419 		/* ignore request if endpoint is wedged */
420 		if (mep->flags & MTU3_EP_WEDGE)
421 			break;
422 
423 		mtu3_ep_stall_set(mep, set);
424 		break;
425 	default:
426 		/* class, vendor, etc ... delegate */
427 		handled = 0;
428 		break;
429 	}
430 	return handled;
431 }
432 
433 /*
434  * handle all control requests can be handled
435  * returns:
436  *	negative errno - error happened
437  *	zero - need delegate SETUP to gadget driver
438  *	positive - already handled
439  */
handle_standard_request(struct mtu3 * mtu,struct usb_ctrlrequest * setup)440 static int handle_standard_request(struct mtu3 *mtu,
441 			  struct usb_ctrlrequest *setup)
442 {
443 	void __iomem *mbase = mtu->mac_base;
444 	enum usb_device_state state = mtu->g.state;
445 	int handled = -EINVAL;
446 	u32 dev_conf;
447 	u16 value;
448 
449 	value = le16_to_cpu(setup->wValue);
450 
451 	/* the gadget driver handles everything except what we must handle */
452 	switch (setup->bRequest) {
453 	case USB_REQ_SET_ADDRESS:
454 		/* change it after the status stage */
455 		mtu->address = (u8) (value & 0x7f);
456 		dev_dbg(mtu->dev, "set address to 0x%x\n", mtu->address);
457 
458 		dev_conf = mtu3_readl(mbase, U3D_DEVICE_CONF);
459 		dev_conf &= ~DEV_ADDR_MSK;
460 		dev_conf |= DEV_ADDR(mtu->address);
461 		mtu3_writel(mbase, U3D_DEVICE_CONF, dev_conf);
462 
463 		if (mtu->address)
464 			usb_gadget_set_state(&mtu->g, USB_STATE_ADDRESS);
465 		else
466 			usb_gadget_set_state(&mtu->g, USB_STATE_DEFAULT);
467 
468 		handled = 1;
469 		break;
470 	case USB_REQ_SET_CONFIGURATION:
471 		if (state == USB_STATE_ADDRESS) {
472 			usb_gadget_set_state(&mtu->g,
473 					USB_STATE_CONFIGURED);
474 		} else if (state == USB_STATE_CONFIGURED) {
475 			/*
476 			 * USB2 spec sec 9.4.7, if wValue is 0 then dev
477 			 * is moved to addressed state
478 			 */
479 			if (!value)
480 				usb_gadget_set_state(&mtu->g,
481 						USB_STATE_ADDRESS);
482 		}
483 		handled = 0;
484 		break;
485 	case USB_REQ_CLEAR_FEATURE:
486 		handled = ep0_handle_feature(mtu, setup, 0);
487 		break;
488 	case USB_REQ_SET_FEATURE:
489 		handled = ep0_handle_feature(mtu, setup, 1);
490 		break;
491 	case USB_REQ_GET_STATUS:
492 		handled = ep0_get_status(mtu, setup);
493 		break;
494 	case USB_REQ_SET_SEL:
495 		handled = ep0_set_sel(mtu, setup);
496 		break;
497 	case USB_REQ_SET_ISOCH_DELAY:
498 		handled = 1;
499 		break;
500 	default:
501 		/* delegate SET_CONFIGURATION, etc */
502 		handled = 0;
503 	}
504 
505 	return handled;
506 }
507 
508 /* receive an data packet (OUT) */
ep0_rx_state(struct mtu3 * mtu)509 static void ep0_rx_state(struct mtu3 *mtu)
510 {
511 	struct mtu3_request *mreq;
512 	struct usb_request *req;
513 	void __iomem *mbase = mtu->mac_base;
514 	u32 maxp;
515 	u32 csr;
516 	u16 count = 0;
517 
518 	dev_dbg(mtu->dev, "%s\n", __func__);
519 
520 	csr = mtu3_readl(mbase, U3D_EP0CSR) & EP0_W1C_BITS;
521 	mreq = next_ep0_request(mtu);
522 	req = &mreq->request;
523 
524 	/* read packet and ack; or stall because of gadget driver bug */
525 	if (req) {
526 		void *buf = req->buf + req->actual;
527 		unsigned int len = req->length - req->actual;
528 
529 		/* read the buffer */
530 		count = mtu3_readl(mbase, U3D_RXCOUNT0);
531 		if (count > len) {
532 			req->status = -EOVERFLOW;
533 			count = len;
534 		}
535 		ep0_read_fifo(mtu->ep0, buf, count);
536 		req->actual += count;
537 		csr |= EP0_RXPKTRDY;
538 
539 		maxp = mtu->g.ep0->maxpacket;
540 		if (count < maxp || req->actual == req->length) {
541 			mtu->ep0_state = MU3D_EP0_STATE_SETUP;
542 			dev_dbg(mtu->dev, "ep0 state: %s\n",
543 				decode_ep0_state(mtu));
544 
545 			csr |= EP0_DATAEND;
546 		} else {
547 			req = NULL;
548 		}
549 	} else {
550 		csr |= EP0_RXPKTRDY | EP0_SENDSTALL;
551 		dev_dbg(mtu->dev, "%s: SENDSTALL\n", __func__);
552 	}
553 
554 	mtu3_writel(mbase, U3D_EP0CSR, csr);
555 
556 	/* give back the request if have received all data */
557 	if (req)
558 		ep0_req_giveback(mtu, req);
559 
560 }
561 
562 /* transmitting to the host (IN) */
ep0_tx_state(struct mtu3 * mtu)563 static void ep0_tx_state(struct mtu3 *mtu)
564 {
565 	struct mtu3_request *mreq = next_ep0_request(mtu);
566 	struct usb_request *req;
567 	u32 csr;
568 	u8 *src;
569 	u32 count;
570 	u32 maxp;
571 
572 	dev_dbg(mtu->dev, "%s\n", __func__);
573 
574 	if (!mreq)
575 		return;
576 
577 	maxp = mtu->g.ep0->maxpacket;
578 	req = &mreq->request;
579 
580 	/* load the data */
581 	src = (u8 *)req->buf + req->actual;
582 	count = min(maxp, req->length - req->actual);
583 	if (count)
584 		ep0_write_fifo(mtu->ep0, src, count);
585 
586 	dev_dbg(mtu->dev, "%s act=%d, len=%d, cnt=%d, maxp=%d zero=%d\n",
587 		 __func__, req->actual, req->length, count, maxp, req->zero);
588 
589 	req->actual += count;
590 
591 	if ((count < maxp)
592 		|| ((req->actual == req->length) && !req->zero))
593 		mtu->ep0_state = MU3D_EP0_STATE_TX_END;
594 
595 	/* send it out, triggering a "txpktrdy cleared" irq */
596 	csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
597 	mtu3_writel(mtu->mac_base, U3D_EP0CSR, csr | EP0_TXPKTRDY);
598 
599 	dev_dbg(mtu->dev, "%s ep0csr=0x%x\n", __func__,
600 		mtu3_readl(mtu->mac_base, U3D_EP0CSR));
601 }
602 
ep0_read_setup(struct mtu3 * mtu,struct usb_ctrlrequest * setup)603 static void ep0_read_setup(struct mtu3 *mtu, struct usb_ctrlrequest *setup)
604 {
605 	struct mtu3_request *mreq;
606 	u32 count;
607 	u32 csr;
608 
609 	csr = mtu3_readl(mtu->mac_base, U3D_EP0CSR) & EP0_W1C_BITS;
610 	count = mtu3_readl(mtu->mac_base, U3D_RXCOUNT0);
611 
612 	ep0_read_fifo(mtu->ep0, (u8 *)setup, count);
613 
614 	dev_dbg(mtu->dev, "SETUP req%02x.%02x v%04x i%04x l%04x\n",
615 		 setup->bRequestType, setup->bRequest,
616 		 le16_to_cpu(setup->wValue), le16_to_cpu(setup->wIndex),
617 		 le16_to_cpu(setup->wLength));
618 
619 	/* clean up any leftover transfers */
620 	mreq = next_ep0_request(mtu);
621 	if (mreq)
622 		ep0_req_giveback(mtu, &mreq->request);
623 
624 	if (le16_to_cpu(setup->wLength) == 0) {
625 		;	/* no data stage, nothing to do */
626 	} else if (setup->bRequestType & USB_DIR_IN) {
627 		mtu3_writel(mtu->mac_base, U3D_EP0CSR,
628 			csr | EP0_SETUPPKTRDY | EP0_DPHTX);
629 		mtu->ep0_state = MU3D_EP0_STATE_TX;
630 	} else {
631 		mtu3_writel(mtu->mac_base, U3D_EP0CSR,
632 			(csr | EP0_SETUPPKTRDY) & (~EP0_DPHTX));
633 		mtu->ep0_state = MU3D_EP0_STATE_RX;
634 	}
635 }
636 
ep0_handle_setup(struct mtu3 * mtu)637 static int ep0_handle_setup(struct mtu3 *mtu)
638 __releases(mtu->lock)
639 __acquires(mtu->lock)
640 {
641 	struct usb_ctrlrequest setup;
642 	struct mtu3_request *mreq;
643 	int handled = 0;
644 
645 	ep0_read_setup(mtu, &setup);
646 	trace_mtu3_handle_setup(&setup);
647 
648 	if ((setup.bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
649 		handled = handle_standard_request(mtu, &setup);
650 
651 	dev_dbg(mtu->dev, "handled %d, ep0_state: %s\n",
652 		 handled, decode_ep0_state(mtu));
653 
654 	if (handled < 0)
655 		goto stall;
656 	else if (handled > 0)
657 		goto finish;
658 
659 	handled = forward_to_driver(mtu, &setup);
660 	if (handled < 0) {
661 stall:
662 		dev_dbg(mtu->dev, "%s stall (%d)\n", __func__, handled);
663 
664 		ep0_stall_set(mtu->ep0, true,
665 			le16_to_cpu(setup.wLength) ? 0 : EP0_SETUPPKTRDY);
666 
667 		return 0;
668 	}
669 
670 finish:
671 	if (mtu->test_mode) {
672 		;	/* nothing to do */
673 	} else if (handled == USB_GADGET_DELAYED_STATUS) {
674 
675 		mreq = next_ep0_request(mtu);
676 		if (mreq) {
677 			/* already asked us to continue delayed status */
678 			ep0_do_status_stage(mtu);
679 			ep0_req_giveback(mtu, &mreq->request);
680 		} else {
681 			/* do delayed STATUS stage till receive ep0_queue */
682 			mtu->delayed_status = true;
683 		}
684 	} else if (le16_to_cpu(setup.wLength) == 0) { /* no data stage */
685 
686 		ep0_do_status_stage(mtu);
687 		/* complete zlp request directly */
688 		mreq = next_ep0_request(mtu);
689 		if (mreq && !mreq->request.length)
690 			ep0_req_giveback(mtu, &mreq->request);
691 	}
692 
693 	return 0;
694 }
695 
mtu3_ep0_isr(struct mtu3 * mtu)696 irqreturn_t mtu3_ep0_isr(struct mtu3 *mtu)
697 {
698 	void __iomem *mbase = mtu->mac_base;
699 	struct mtu3_request *mreq;
700 	u32 int_status;
701 	irqreturn_t ret = IRQ_NONE;
702 	u32 csr;
703 	u32 len;
704 
705 	int_status = mtu3_readl(mbase, U3D_EPISR);
706 	int_status &= mtu3_readl(mbase, U3D_EPIER);
707 	mtu3_writel(mbase, U3D_EPISR, int_status); /* W1C */
708 
709 	/* only handle ep0's */
710 	if (!(int_status & (EP0ISR | SETUPENDISR)))
711 		return IRQ_NONE;
712 
713 	/* abort current SETUP, and process new one */
714 	if (int_status & SETUPENDISR)
715 		mtu->ep0_state = MU3D_EP0_STATE_SETUP;
716 
717 	csr = mtu3_readl(mbase, U3D_EP0CSR);
718 
719 	dev_dbg(mtu->dev, "%s csr=0x%x\n", __func__, csr);
720 
721 	/* we sent a stall.. need to clear it now.. */
722 	if (csr & EP0_SENTSTALL) {
723 		ep0_stall_set(mtu->ep0, false, 0);
724 		csr = mtu3_readl(mbase, U3D_EP0CSR);
725 		ret = IRQ_HANDLED;
726 	}
727 	dev_dbg(mtu->dev, "ep0_state: %s\n", decode_ep0_state(mtu));
728 	mtu3_dbg_trace(mtu->dev, "ep0_state %s", decode_ep0_state(mtu));
729 
730 	switch (mtu->ep0_state) {
731 	case MU3D_EP0_STATE_TX:
732 		/* irq on clearing txpktrdy */
733 		if ((csr & EP0_FIFOFULL) == 0) {
734 			ep0_tx_state(mtu);
735 			ret = IRQ_HANDLED;
736 		}
737 		break;
738 	case MU3D_EP0_STATE_RX:
739 		/* irq on set rxpktrdy */
740 		if (csr & EP0_RXPKTRDY) {
741 			ep0_rx_state(mtu);
742 			ret = IRQ_HANDLED;
743 		}
744 		break;
745 	case MU3D_EP0_STATE_TX_END:
746 		mtu3_writel(mbase, U3D_EP0CSR,
747 			(csr & EP0_W1C_BITS) | EP0_DATAEND);
748 
749 		mreq = next_ep0_request(mtu);
750 		if (mreq)
751 			ep0_req_giveback(mtu, &mreq->request);
752 
753 		mtu->ep0_state = MU3D_EP0_STATE_SETUP;
754 		ret = IRQ_HANDLED;
755 		dev_dbg(mtu->dev, "ep0_state: %s\n", decode_ep0_state(mtu));
756 		break;
757 	case MU3D_EP0_STATE_SETUP:
758 		if (!(csr & EP0_SETUPPKTRDY))
759 			break;
760 
761 		len = mtu3_readl(mbase, U3D_RXCOUNT0);
762 		if (len != 8) {
763 			dev_err(mtu->dev, "SETUP packet len %d != 8 ?\n", len);
764 			break;
765 		}
766 
767 		ep0_handle_setup(mtu);
768 		ret = IRQ_HANDLED;
769 		break;
770 	default:
771 		/* can't happen */
772 		ep0_stall_set(mtu->ep0, true, 0);
773 		WARN_ON(1);
774 		break;
775 	}
776 
777 	return ret;
778 }
779 
780 
mtu3_ep0_enable(struct usb_ep * ep,const struct usb_endpoint_descriptor * desc)781 static int mtu3_ep0_enable(struct usb_ep *ep,
782 	const struct usb_endpoint_descriptor *desc)
783 {
784 	/* always enabled */
785 	return -EINVAL;
786 }
787 
mtu3_ep0_disable(struct usb_ep * ep)788 static int mtu3_ep0_disable(struct usb_ep *ep)
789 {
790 	/* always enabled */
791 	return -EINVAL;
792 }
793 
ep0_queue(struct mtu3_ep * mep,struct mtu3_request * mreq)794 static int ep0_queue(struct mtu3_ep *mep, struct mtu3_request *mreq)
795 {
796 	struct mtu3 *mtu = mep->mtu;
797 
798 	mreq->mtu = mtu;
799 	mreq->request.actual = 0;
800 	mreq->request.status = -EINPROGRESS;
801 
802 	dev_dbg(mtu->dev, "%s %s (ep0_state: %s), len#%d\n", __func__,
803 		mep->name, decode_ep0_state(mtu), mreq->request.length);
804 
805 	switch (mtu->ep0_state) {
806 	case MU3D_EP0_STATE_SETUP:
807 	case MU3D_EP0_STATE_RX:	/* control-OUT data */
808 	case MU3D_EP0_STATE_TX:	/* control-IN data */
809 		break;
810 	default:
811 		dev_err(mtu->dev, "%s, error in ep0 state %s\n", __func__,
812 			decode_ep0_state(mtu));
813 		return -EINVAL;
814 	}
815 
816 	if (mtu->delayed_status) {
817 
818 		mtu->delayed_status = false;
819 		ep0_do_status_stage(mtu);
820 		/* needn't giveback the request for handling delay STATUS */
821 		return 0;
822 	}
823 
824 	if (!list_empty(&mep->req_list))
825 		return -EBUSY;
826 
827 	list_add_tail(&mreq->list, &mep->req_list);
828 
829 	/* sequence #1, IN ... start writing the data */
830 	if (mtu->ep0_state == MU3D_EP0_STATE_TX)
831 		ep0_tx_state(mtu);
832 
833 	return 0;
834 }
835 
mtu3_ep0_queue(struct usb_ep * ep,struct usb_request * req,gfp_t gfp)836 static int mtu3_ep0_queue(struct usb_ep *ep,
837 	struct usb_request *req, gfp_t gfp)
838 {
839 	struct mtu3_ep *mep;
840 	struct mtu3_request *mreq;
841 	struct mtu3 *mtu;
842 	unsigned long flags;
843 	int ret = 0;
844 
845 	if (!ep || !req)
846 		return -EINVAL;
847 
848 	mep = to_mtu3_ep(ep);
849 	mtu = mep->mtu;
850 	mreq = to_mtu3_request(req);
851 
852 	spin_lock_irqsave(&mtu->lock, flags);
853 	ret = ep0_queue(mep, mreq);
854 	spin_unlock_irqrestore(&mtu->lock, flags);
855 	return ret;
856 }
857 
mtu3_ep0_dequeue(struct usb_ep * ep,struct usb_request * req)858 static int mtu3_ep0_dequeue(struct usb_ep *ep, struct usb_request *req)
859 {
860 	/* we just won't support this */
861 	return -EINVAL;
862 }
863 
mtu3_ep0_halt(struct usb_ep * ep,int value)864 static int mtu3_ep0_halt(struct usb_ep *ep, int value)
865 {
866 	struct mtu3_ep *mep;
867 	struct mtu3 *mtu;
868 	unsigned long flags;
869 	int ret = 0;
870 
871 	if (!ep || !value)
872 		return -EINVAL;
873 
874 	mep = to_mtu3_ep(ep);
875 	mtu = mep->mtu;
876 
877 	dev_dbg(mtu->dev, "%s\n", __func__);
878 
879 	spin_lock_irqsave(&mtu->lock, flags);
880 
881 	if (!list_empty(&mep->req_list)) {
882 		ret = -EBUSY;
883 		goto cleanup;
884 	}
885 
886 	switch (mtu->ep0_state) {
887 	/*
888 	 * stalls are usually issued after parsing SETUP packet, either
889 	 * directly in irq context from setup() or else later.
890 	 */
891 	case MU3D_EP0_STATE_TX:
892 	case MU3D_EP0_STATE_TX_END:
893 	case MU3D_EP0_STATE_RX:
894 	case MU3D_EP0_STATE_SETUP:
895 		ep0_stall_set(mtu->ep0, true, 0);
896 		break;
897 	default:
898 		dev_dbg(mtu->dev, "ep0 can't halt in state %s\n",
899 			decode_ep0_state(mtu));
900 		ret = -EINVAL;
901 	}
902 
903 cleanup:
904 	spin_unlock_irqrestore(&mtu->lock, flags);
905 	return ret;
906 }
907 
908 const struct usb_ep_ops mtu3_ep0_ops = {
909 	.enable = mtu3_ep0_enable,
910 	.disable = mtu3_ep0_disable,
911 	.alloc_request = mtu3_alloc_request,
912 	.free_request = mtu3_free_request,
913 	.queue = mtu3_ep0_queue,
914 	.dequeue = mtu3_ep0_dequeue,
915 	.set_halt = mtu3_ep0_halt,
916 };
917