1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright © 2009 Intel Corporation
4  */
5 
6 #include <linux/delay.h>
7 #include <linux/i2c.h>
8 #include <linux/pm_runtime.h>
9 
10 #include <drm/drm_fourcc.h>
11 #include <drm/drm_framebuffer.h>
12 #include <drm/drm_modeset_helper_vtables.h>
13 
14 #include "framebuffer.h"
15 #include "gem.h"
16 #include "gma_display.h"
17 #include "power.h"
18 #include "psb_drv.h"
19 #include "psb_intel_drv.h"
20 #include "psb_intel_reg.h"
21 
22 #define MRST_LIMIT_LVDS_100L	0
23 #define MRST_LIMIT_LVDS_83	1
24 #define MRST_LIMIT_LVDS_100	2
25 #define MRST_LIMIT_SDVO		3
26 
27 #define MRST_DOT_MIN		  19750
28 #define MRST_DOT_MAX		  120000
29 #define MRST_M_MIN_100L		    20
30 #define MRST_M_MIN_100		    10
31 #define MRST_M_MIN_83		    12
32 #define MRST_M_MAX_100L		    34
33 #define MRST_M_MAX_100		    17
34 #define MRST_M_MAX_83		    20
35 #define MRST_P1_MIN		    2
36 #define MRST_P1_MAX_0		    7
37 #define MRST_P1_MAX_1		    8
38 
39 static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
40 				    struct drm_crtc *crtc, int target,
41 				    int refclk, struct gma_clock_t *best_clock);
42 
43 static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
44 				    struct drm_crtc *crtc, int target,
45 				    int refclk, struct gma_clock_t *best_clock);
46 
47 static const struct gma_limit_t mrst_limits[] = {
48 	{			/* MRST_LIMIT_LVDS_100L */
49 	 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
50 	 .m = {.min = MRST_M_MIN_100L, .max = MRST_M_MAX_100L},
51 	 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
52 	 .find_pll = mrst_lvds_find_best_pll,
53 	 },
54 	{			/* MRST_LIMIT_LVDS_83L */
55 	 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
56 	 .m = {.min = MRST_M_MIN_83, .max = MRST_M_MAX_83},
57 	 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_0},
58 	 .find_pll = mrst_lvds_find_best_pll,
59 	 },
60 	{			/* MRST_LIMIT_LVDS_100 */
61 	 .dot = {.min = MRST_DOT_MIN, .max = MRST_DOT_MAX},
62 	 .m = {.min = MRST_M_MIN_100, .max = MRST_M_MAX_100},
63 	 .p1 = {.min = MRST_P1_MIN, .max = MRST_P1_MAX_1},
64 	 .find_pll = mrst_lvds_find_best_pll,
65 	 },
66 	{			/* MRST_LIMIT_SDVO */
67 	 .vco = {.min = 1400000, .max = 2800000},
68 	 .n = {.min = 3, .max = 7},
69 	 .m = {.min = 80, .max = 137},
70 	 .p1 = {.min = 1, .max = 2},
71 	 .p2 = {.dot_limit = 200000, .p2_slow = 10, .p2_fast = 10},
72 	 .find_pll = mrst_sdvo_find_best_pll,
73 	 },
74 };
75 
76 #define MRST_M_MIN	    10
77 static const u32 oaktrail_m_converts[] = {
78 	0x2B, 0x15, 0x2A, 0x35, 0x1A, 0x0D, 0x26, 0x33, 0x19, 0x2C,
79 	0x36, 0x3B, 0x1D, 0x2E, 0x37, 0x1B, 0x2D, 0x16, 0x0B, 0x25,
80 	0x12, 0x09, 0x24, 0x32, 0x39, 0x1c,
81 };
82 
mrst_limit(struct drm_crtc * crtc,int refclk)83 static const struct gma_limit_t *mrst_limit(struct drm_crtc *crtc,
84 					    int refclk)
85 {
86 	const struct gma_limit_t *limit = NULL;
87 	struct drm_device *dev = crtc->dev;
88 	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
89 
90 	if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)
91 	    || gma_pipe_has_type(crtc, INTEL_OUTPUT_MIPI)) {
92 		switch (dev_priv->core_freq) {
93 		case 100:
94 			limit = &mrst_limits[MRST_LIMIT_LVDS_100L];
95 			break;
96 		case 166:
97 			limit = &mrst_limits[MRST_LIMIT_LVDS_83];
98 			break;
99 		case 200:
100 			limit = &mrst_limits[MRST_LIMIT_LVDS_100];
101 			break;
102 		}
103 	} else if (gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
104 		limit = &mrst_limits[MRST_LIMIT_SDVO];
105 	} else {
106 		limit = NULL;
107 		dev_err(dev->dev, "mrst_limit Wrong display type.\n");
108 	}
109 
110 	return limit;
111 }
112 
113 /** Derive the pixel clock for the given refclk and divisors for 8xx chips. */
mrst_lvds_clock(int refclk,struct gma_clock_t * clock)114 static void mrst_lvds_clock(int refclk, struct gma_clock_t *clock)
115 {
116 	clock->dot = (refclk * clock->m) / (14 * clock->p1);
117 }
118 
mrst_print_pll(struct gma_clock_t * clock)119 static void mrst_print_pll(struct gma_clock_t *clock)
120 {
121 	DRM_DEBUG_DRIVER("dotclock=%d,  m=%d, m1=%d, m2=%d, n=%d, p1=%d, p2=%d\n",
122 			 clock->dot, clock->m, clock->m1, clock->m2, clock->n,
123 			 clock->p1, clock->p2);
124 }
125 
mrst_sdvo_find_best_pll(const struct gma_limit_t * limit,struct drm_crtc * crtc,int target,int refclk,struct gma_clock_t * best_clock)126 static bool mrst_sdvo_find_best_pll(const struct gma_limit_t *limit,
127 				    struct drm_crtc *crtc, int target,
128 				    int refclk, struct gma_clock_t *best_clock)
129 {
130 	struct gma_clock_t clock;
131 	u32 target_vco, actual_freq;
132 	s32 freq_error, min_error = 100000;
133 
134 	memset(best_clock, 0, sizeof(*best_clock));
135 	memset(&clock, 0, sizeof(clock));
136 
137 	for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
138 		for (clock.n = limit->n.min; clock.n <= limit->n.max;
139 		     clock.n++) {
140 			for (clock.p1 = limit->p1.min;
141 			     clock.p1 <= limit->p1.max; clock.p1++) {
142 				/* p2 value always stored in p2_slow on SDVO */
143 				clock.p = clock.p1 * limit->p2.p2_slow;
144 				target_vco = target * clock.p;
145 
146 				/* VCO will increase at this point so break */
147 				if (target_vco > limit->vco.max)
148 					break;
149 
150 				if (target_vco < limit->vco.min)
151 					continue;
152 
153 				actual_freq = (refclk * clock.m) /
154 					      (clock.n * clock.p);
155 				freq_error = 10000 -
156 					     ((target * 10000) / actual_freq);
157 
158 				if (freq_error < -min_error) {
159 					/* freq_error will start to decrease at
160 					   this point so break */
161 					break;
162 				}
163 
164 				if (freq_error < 0)
165 					freq_error = -freq_error;
166 
167 				if (freq_error < min_error) {
168 					min_error = freq_error;
169 					*best_clock = clock;
170 				}
171 			}
172 		}
173 		if (min_error == 0)
174 			break;
175 	}
176 
177 	return min_error == 0;
178 }
179 
180 /*
181  * Returns a set of divisors for the desired target clock with the given refclk,
182  * or FALSE.  Divisor values are the actual divisors for
183  */
mrst_lvds_find_best_pll(const struct gma_limit_t * limit,struct drm_crtc * crtc,int target,int refclk,struct gma_clock_t * best_clock)184 static bool mrst_lvds_find_best_pll(const struct gma_limit_t *limit,
185 				    struct drm_crtc *crtc, int target,
186 				    int refclk, struct gma_clock_t *best_clock)
187 {
188 	struct gma_clock_t clock;
189 	int err = target;
190 
191 	memset(best_clock, 0, sizeof(*best_clock));
192 	memset(&clock, 0, sizeof(clock));
193 
194 	for (clock.m = limit->m.min; clock.m <= limit->m.max; clock.m++) {
195 		for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max;
196 		     clock.p1++) {
197 			int this_err;
198 
199 			mrst_lvds_clock(refclk, &clock);
200 
201 			this_err = abs(clock.dot - target);
202 			if (this_err < err) {
203 				*best_clock = clock;
204 				err = this_err;
205 			}
206 		}
207 	}
208 	return err != target;
209 }
210 
211 /*
212  * Sets the power management mode of the pipe and plane.
213  *
214  * This code should probably grow support for turning the cursor off and back
215  * on appropriately at the same time as we're turning the pipe off/on.
216  */
oaktrail_crtc_dpms(struct drm_crtc * crtc,int mode)217 static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode)
218 {
219 	struct drm_device *dev = crtc->dev;
220 	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
221 	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
222 	int pipe = gma_crtc->pipe;
223 	const struct psb_offset *map = &dev_priv->regmap[pipe];
224 	u32 temp;
225 	int i;
226 	int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0;
227 
228 	if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI)) {
229 		oaktrail_crtc_hdmi_dpms(crtc, mode);
230 		return;
231 	}
232 
233 	if (!gma_power_begin(dev, true))
234 		return;
235 
236 	/* XXX: When our outputs are all unaware of DPMS modes other than off
237 	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
238 	 */
239 	switch (mode) {
240 	case DRM_MODE_DPMS_ON:
241 	case DRM_MODE_DPMS_STANDBY:
242 	case DRM_MODE_DPMS_SUSPEND:
243 		for (i = 0; i <= need_aux; i++) {
244 			/* Enable the DPLL */
245 			temp = REG_READ_WITH_AUX(map->dpll, i);
246 			if ((temp & DPLL_VCO_ENABLE) == 0) {
247 				REG_WRITE_WITH_AUX(map->dpll, temp, i);
248 				REG_READ_WITH_AUX(map->dpll, i);
249 				/* Wait for the clocks to stabilize. */
250 				udelay(150);
251 				REG_WRITE_WITH_AUX(map->dpll,
252 						   temp | DPLL_VCO_ENABLE, i);
253 				REG_READ_WITH_AUX(map->dpll, i);
254 				/* Wait for the clocks to stabilize. */
255 				udelay(150);
256 				REG_WRITE_WITH_AUX(map->dpll,
257 						   temp | DPLL_VCO_ENABLE, i);
258 				REG_READ_WITH_AUX(map->dpll, i);
259 				/* Wait for the clocks to stabilize. */
260 				udelay(150);
261 			}
262 
263 			/* Enable the pipe */
264 			temp = REG_READ_WITH_AUX(map->conf, i);
265 			if ((temp & PIPEACONF_ENABLE) == 0) {
266 				REG_WRITE_WITH_AUX(map->conf,
267 						   temp | PIPEACONF_ENABLE, i);
268 			}
269 
270 			/* Enable the plane */
271 			temp = REG_READ_WITH_AUX(map->cntr, i);
272 			if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
273 				REG_WRITE_WITH_AUX(map->cntr,
274 						   temp | DISPLAY_PLANE_ENABLE,
275 						   i);
276 				/* Flush the plane changes */
277 				REG_WRITE_WITH_AUX(map->base,
278 					REG_READ_WITH_AUX(map->base, i), i);
279 			}
280 
281 		}
282 		gma_crtc_load_lut(crtc);
283 
284 		/* Give the overlay scaler a chance to enable
285 		   if it's on this pipe */
286 		/* psb_intel_crtc_dpms_video(crtc, true); TODO */
287 		break;
288 	case DRM_MODE_DPMS_OFF:
289 		/* Give the overlay scaler a chance to disable
290 		 * if it's on this pipe */
291 		/* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
292 
293 		for (i = 0; i <= need_aux; i++) {
294 			/* Disable the VGA plane that we never use */
295 			REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i);
296 			/* Disable display plane */
297 			temp = REG_READ_WITH_AUX(map->cntr, i);
298 			if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
299 				REG_WRITE_WITH_AUX(map->cntr,
300 					temp & ~DISPLAY_PLANE_ENABLE, i);
301 				/* Flush the plane changes */
302 				REG_WRITE_WITH_AUX(map->base,
303 						   REG_READ(map->base), i);
304 				REG_READ_WITH_AUX(map->base, i);
305 			}
306 
307 			/* Next, disable display pipes */
308 			temp = REG_READ_WITH_AUX(map->conf, i);
309 			if ((temp & PIPEACONF_ENABLE) != 0) {
310 				REG_WRITE_WITH_AUX(map->conf,
311 						   temp & ~PIPEACONF_ENABLE, i);
312 				REG_READ_WITH_AUX(map->conf, i);
313 			}
314 			/* Wait for the pipe disable to take effect. */
315 			gma_wait_for_vblank(dev);
316 
317 			temp = REG_READ_WITH_AUX(map->dpll, i);
318 			if ((temp & DPLL_VCO_ENABLE) != 0) {
319 				REG_WRITE_WITH_AUX(map->dpll,
320 						   temp & ~DPLL_VCO_ENABLE, i);
321 				REG_READ_WITH_AUX(map->dpll, i);
322 			}
323 
324 			/* Wait for the clocks to turn off. */
325 			udelay(150);
326 		}
327 		break;
328 	}
329 
330 	/* Set FIFO Watermarks (values taken from EMGD) */
331 	REG_WRITE(DSPARB, 0x3f80);
332 	REG_WRITE(DSPFW1, 0x3f8f0404);
333 	REG_WRITE(DSPFW2, 0x04040f04);
334 	REG_WRITE(DSPFW3, 0x0);
335 	REG_WRITE(DSPFW4, 0x04040404);
336 	REG_WRITE(DSPFW5, 0x04040404);
337 	REG_WRITE(DSPFW6, 0x78);
338 	REG_WRITE(DSPCHICKENBIT, REG_READ(DSPCHICKENBIT) | 0xc040);
339 
340 	gma_power_end(dev);
341 }
342 
343 /*
344  * Return the pipe currently connected to the panel fitter,
345  * or -1 if the panel fitter is not present or not in use
346  */
oaktrail_panel_fitter_pipe(struct drm_device * dev)347 static int oaktrail_panel_fitter_pipe(struct drm_device *dev)
348 {
349 	u32 pfit_control;
350 
351 	pfit_control = REG_READ(PFIT_CONTROL);
352 
353 	/* See if the panel fitter is in use */
354 	if ((pfit_control & PFIT_ENABLE) == 0)
355 		return -1;
356 	return (pfit_control >> 29) & 3;
357 }
358 
oaktrail_crtc_mode_set(struct drm_crtc * crtc,struct drm_display_mode * mode,struct drm_display_mode * adjusted_mode,int x,int y,struct drm_framebuffer * old_fb)359 static int oaktrail_crtc_mode_set(struct drm_crtc *crtc,
360 			      struct drm_display_mode *mode,
361 			      struct drm_display_mode *adjusted_mode,
362 			      int x, int y,
363 			      struct drm_framebuffer *old_fb)
364 {
365 	struct drm_device *dev = crtc->dev;
366 	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
367 	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
368 	int pipe = gma_crtc->pipe;
369 	const struct psb_offset *map = &dev_priv->regmap[pipe];
370 	int refclk = 0;
371 	struct gma_clock_t clock;
372 	const struct gma_limit_t *limit;
373 	u32 dpll = 0, fp = 0, dspcntr, pipeconf;
374 	bool ok, is_sdvo = false;
375 	bool is_lvds = false;
376 	bool is_mipi = false;
377 	struct gma_encoder *gma_encoder = NULL;
378 	uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN;
379 	struct drm_connector_list_iter conn_iter;
380 	struct drm_connector *connector;
381 	int i;
382 	int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0;
383 
384 	if (gma_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
385 		return oaktrail_crtc_hdmi_mode_set(crtc, mode, adjusted_mode, x, y, old_fb);
386 
387 	if (!gma_power_begin(dev, true))
388 		return 0;
389 
390 	drm_mode_copy(&gma_crtc->saved_mode, mode);
391 	drm_mode_copy(&gma_crtc->saved_adjusted_mode, adjusted_mode);
392 
393 	drm_connector_list_iter_begin(dev, &conn_iter);
394 	drm_for_each_connector_iter(connector, &conn_iter) {
395 		if (!connector->encoder || connector->encoder->crtc != crtc)
396 			continue;
397 
398 		gma_encoder = gma_attached_encoder(connector);
399 
400 		switch (gma_encoder->type) {
401 		case INTEL_OUTPUT_LVDS:
402 			is_lvds = true;
403 			break;
404 		case INTEL_OUTPUT_SDVO:
405 			is_sdvo = true;
406 			break;
407 		case INTEL_OUTPUT_MIPI:
408 			is_mipi = true;
409 			break;
410 		}
411 
412 		break;
413 	}
414 
415 	if (gma_encoder)
416 		drm_object_property_get_value(&connector->base,
417 			dev->mode_config.scaling_mode_property, &scalingType);
418 
419 	drm_connector_list_iter_end(&conn_iter);
420 
421 	/* Disable the VGA plane that we never use */
422 	for (i = 0; i <= need_aux; i++)
423 		REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i);
424 
425 	/* Disable the panel fitter if it was on our pipe */
426 	if (oaktrail_panel_fitter_pipe(dev) == pipe)
427 		REG_WRITE(PFIT_CONTROL, 0);
428 
429 	for (i = 0; i <= need_aux; i++) {
430 		REG_WRITE_WITH_AUX(map->src, ((mode->crtc_hdisplay - 1) << 16) |
431 					     (mode->crtc_vdisplay - 1), i);
432 	}
433 
434 	if (scalingType == DRM_MODE_SCALE_NO_SCALE) {
435 		/* Moorestown doesn't have register support for centering so
436 		 * we need to mess with the h/vblank and h/vsync start and
437 		 * ends to get centering */
438 		int offsetX = 0, offsetY = 0;
439 
440 		offsetX = (adjusted_mode->crtc_hdisplay -
441 			   mode->crtc_hdisplay) / 2;
442 		offsetY = (adjusted_mode->crtc_vdisplay -
443 			   mode->crtc_vdisplay) / 2;
444 
445 		for (i = 0; i <= need_aux; i++) {
446 			REG_WRITE_WITH_AUX(map->htotal, (mode->crtc_hdisplay - 1) |
447 				((adjusted_mode->crtc_htotal - 1) << 16), i);
448 			REG_WRITE_WITH_AUX(map->vtotal, (mode->crtc_vdisplay - 1) |
449 				((adjusted_mode->crtc_vtotal - 1) << 16), i);
450 			REG_WRITE_WITH_AUX(map->hblank,
451 				(adjusted_mode->crtc_hblank_start - offsetX - 1) |
452 				((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16), i);
453 			REG_WRITE_WITH_AUX(map->hsync,
454 				(adjusted_mode->crtc_hsync_start - offsetX - 1) |
455 				((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16), i);
456 			REG_WRITE_WITH_AUX(map->vblank,
457 				(adjusted_mode->crtc_vblank_start - offsetY - 1) |
458 				((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16), i);
459 			REG_WRITE_WITH_AUX(map->vsync,
460 				(adjusted_mode->crtc_vsync_start - offsetY - 1) |
461 				((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16), i);
462 		}
463 	} else {
464 		for (i = 0; i <= need_aux; i++) {
465 			REG_WRITE_WITH_AUX(map->htotal, (adjusted_mode->crtc_hdisplay - 1) |
466 				((adjusted_mode->crtc_htotal - 1) << 16), i);
467 			REG_WRITE_WITH_AUX(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) |
468 				((adjusted_mode->crtc_vtotal - 1) << 16), i);
469 			REG_WRITE_WITH_AUX(map->hblank, (adjusted_mode->crtc_hblank_start - 1) |
470 				((adjusted_mode->crtc_hblank_end - 1) << 16), i);
471 			REG_WRITE_WITH_AUX(map->hsync, (adjusted_mode->crtc_hsync_start - 1) |
472 				((adjusted_mode->crtc_hsync_end - 1) << 16), i);
473 			REG_WRITE_WITH_AUX(map->vblank, (adjusted_mode->crtc_vblank_start - 1) |
474 				((adjusted_mode->crtc_vblank_end - 1) << 16), i);
475 			REG_WRITE_WITH_AUX(map->vsync, (adjusted_mode->crtc_vsync_start - 1) |
476 				((adjusted_mode->crtc_vsync_end - 1) << 16), i);
477 		}
478 	}
479 
480 	/* Flush the plane changes */
481 	{
482 		const struct drm_crtc_helper_funcs *crtc_funcs =
483 		    crtc->helper_private;
484 		crtc_funcs->mode_set_base(crtc, x, y, old_fb);
485 	}
486 
487 	/* setup pipeconf */
488 	pipeconf = REG_READ(map->conf);
489 
490 	/* Set up the display plane register */
491 	dspcntr = REG_READ(map->cntr);
492 	dspcntr |= DISPPLANE_GAMMA_ENABLE;
493 
494 	if (pipe == 0)
495 		dspcntr |= DISPPLANE_SEL_PIPE_A;
496 	else
497 		dspcntr |= DISPPLANE_SEL_PIPE_B;
498 
499 	if (is_mipi)
500 		goto oaktrail_crtc_mode_set_exit;
501 
502 
503 	dpll = 0;		/*BIT16 = 0 for 100MHz reference */
504 
505 	refclk = is_sdvo ? 96000 : dev_priv->core_freq * 1000;
506 	limit = mrst_limit(crtc, refclk);
507 	ok = limit->find_pll(limit, crtc, adjusted_mode->clock,
508 			     refclk, &clock);
509 
510 	if (is_sdvo) {
511 		/* Convert calculated values to register values */
512 		clock.p1 = (1L << (clock.p1 - 1));
513 		clock.m -= 2;
514 		clock.n = (1L << (clock.n - 1));
515 	}
516 
517 	if (!ok)
518 		DRM_ERROR("Failed to find proper PLL settings");
519 
520 	mrst_print_pll(&clock);
521 
522 	if (is_sdvo)
523 		fp = clock.n << 16 | clock.m;
524 	else
525 		fp = oaktrail_m_converts[(clock.m - MRST_M_MIN)] << 8;
526 
527 	dpll |= DPLL_VGA_MODE_DIS;
528 
529 
530 	dpll |= DPLL_VCO_ENABLE;
531 
532 	if (is_lvds)
533 		dpll |= DPLLA_MODE_LVDS;
534 	else
535 		dpll |= DPLLB_MODE_DAC_SERIAL;
536 
537 	if (is_sdvo) {
538 		int sdvo_pixel_multiply =
539 		    adjusted_mode->clock / mode->clock;
540 
541 		dpll |= DPLL_DVO_HIGH_SPEED;
542 		dpll |=
543 		    (sdvo_pixel_multiply -
544 		     1) << SDVO_MULTIPLIER_SHIFT_HIRES;
545 	}
546 
547 
548 	/* compute bitmask from p1 value */
549 	if (is_sdvo)
550 		dpll |= clock.p1 << 16; // dpll |= (1 << (clock.p1 - 1)) << 16;
551 	else
552 		dpll |= (1 << (clock.p1 - 2)) << 17;
553 
554 	dpll |= DPLL_VCO_ENABLE;
555 
556 	if (dpll & DPLL_VCO_ENABLE) {
557 		for (i = 0; i <= need_aux; i++) {
558 			REG_WRITE_WITH_AUX(map->fp0, fp, i);
559 			REG_WRITE_WITH_AUX(map->dpll, dpll & ~DPLL_VCO_ENABLE, i);
560 			REG_READ_WITH_AUX(map->dpll, i);
561 			/* Check the DPLLA lock bit PIPEACONF[29] */
562 			udelay(150);
563 		}
564 	}
565 
566 	for (i = 0; i <= need_aux; i++) {
567 		REG_WRITE_WITH_AUX(map->fp0, fp, i);
568 		REG_WRITE_WITH_AUX(map->dpll, dpll, i);
569 		REG_READ_WITH_AUX(map->dpll, i);
570 		/* Wait for the clocks to stabilize. */
571 		udelay(150);
572 
573 		/* write it again -- the BIOS does, after all */
574 		REG_WRITE_WITH_AUX(map->dpll, dpll, i);
575 		REG_READ_WITH_AUX(map->dpll, i);
576 		/* Wait for the clocks to stabilize. */
577 		udelay(150);
578 
579 		REG_WRITE_WITH_AUX(map->conf, pipeconf, i);
580 		REG_READ_WITH_AUX(map->conf, i);
581 		gma_wait_for_vblank(dev);
582 
583 		REG_WRITE_WITH_AUX(map->cntr, dspcntr, i);
584 		gma_wait_for_vblank(dev);
585 	}
586 
587 oaktrail_crtc_mode_set_exit:
588 	gma_power_end(dev);
589 	return 0;
590 }
591 
oaktrail_pipe_set_base(struct drm_crtc * crtc,int x,int y,struct drm_framebuffer * old_fb)592 static int oaktrail_pipe_set_base(struct drm_crtc *crtc,
593 			    int x, int y, struct drm_framebuffer *old_fb)
594 {
595 	struct drm_device *dev = crtc->dev;
596 	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
597 	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
598 	struct drm_framebuffer *fb = crtc->primary->fb;
599 	int pipe = gma_crtc->pipe;
600 	const struct psb_offset *map = &dev_priv->regmap[pipe];
601 	unsigned long start, offset;
602 
603 	u32 dspcntr;
604 	int ret = 0;
605 
606 	/* no fb bound */
607 	if (!fb) {
608 		dev_dbg(dev->dev, "No FB bound\n");
609 		return 0;
610 	}
611 
612 	if (!gma_power_begin(dev, true))
613 		return 0;
614 
615 	start = to_psb_gem_object(fb->obj[0])->offset;
616 	offset = y * fb->pitches[0] + x * fb->format->cpp[0];
617 
618 	REG_WRITE(map->stride, fb->pitches[0]);
619 
620 	dspcntr = REG_READ(map->cntr);
621 	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
622 
623 	switch (fb->format->cpp[0] * 8) {
624 	case 8:
625 		dspcntr |= DISPPLANE_8BPP;
626 		break;
627 	case 16:
628 		if (fb->format->depth == 15)
629 			dspcntr |= DISPPLANE_15_16BPP;
630 		else
631 			dspcntr |= DISPPLANE_16BPP;
632 		break;
633 	case 24:
634 	case 32:
635 		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
636 		break;
637 	default:
638 		dev_err(dev->dev, "Unknown color depth\n");
639 		ret = -EINVAL;
640 		goto pipe_set_base_exit;
641 	}
642 	REG_WRITE(map->cntr, dspcntr);
643 
644 	REG_WRITE(map->base, offset);
645 	REG_READ(map->base);
646 	REG_WRITE(map->surf, start);
647 	REG_READ(map->surf);
648 
649 pipe_set_base_exit:
650 	gma_power_end(dev);
651 	return ret;
652 }
653 
654 const struct drm_crtc_helper_funcs oaktrail_helper_funcs = {
655 	.dpms = oaktrail_crtc_dpms,
656 	.mode_set = oaktrail_crtc_mode_set,
657 	.mode_set_base = oaktrail_pipe_set_base,
658 	.prepare = gma_crtc_prepare,
659 	.commit = gma_crtc_commit,
660 };
661 
662 /* Not used yet */
663 const struct gma_clock_funcs mrst_clock_funcs = {
664 	.clock = mrst_lvds_clock,
665 	.limit = mrst_limit,
666 	.pll_is_valid = gma_pll_is_valid,
667 };
668