1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2 /* Copyright (c) 2016-2018 Mellanox Technologies. All rights reserved */
3
4 #include <linux/err.h>
5 #include <linux/i2c.h>
6 #include <linux/init.h>
7 #include <linux/jiffies.h>
8 #include <linux/kernel.h>
9 #include <linux/mutex.h>
10 #include <linux/module.h>
11 #include <linux/mod_devicetable.h>
12 #include <linux/platform_data/mlxreg.h>
13 #include <linux/slab.h>
14
15 #include "cmd.h"
16 #include "core.h"
17 #include "i2c.h"
18 #include "resources.h"
19
20 #define MLXSW_I2C_CIR2_BASE 0x72000
21 #define MLXSW_I2C_CIR_STATUS_OFF 0x18
22 #define MLXSW_I2C_CIR2_OFF_STATUS (MLXSW_I2C_CIR2_BASE + \
23 MLXSW_I2C_CIR_STATUS_OFF)
24 #define MLXSW_I2C_OPMOD_SHIFT 12
25 #define MLXSW_I2C_EVENT_BIT_SHIFT 22
26 #define MLXSW_I2C_GO_BIT_SHIFT 23
27 #define MLXSW_I2C_CIR_CTRL_STATUS_SHIFT 24
28 #define MLXSW_I2C_EVENT_BIT BIT(MLXSW_I2C_EVENT_BIT_SHIFT)
29 #define MLXSW_I2C_GO_BIT BIT(MLXSW_I2C_GO_BIT_SHIFT)
30 #define MLXSW_I2C_GO_OPMODE BIT(MLXSW_I2C_OPMOD_SHIFT)
31 #define MLXSW_I2C_SET_IMM_CMD (MLXSW_I2C_GO_OPMODE | \
32 MLXSW_CMD_OPCODE_QUERY_FW)
33 #define MLXSW_I2C_PUSH_IMM_CMD (MLXSW_I2C_GO_BIT | \
34 MLXSW_I2C_SET_IMM_CMD)
35 #define MLXSW_I2C_SET_CMD (MLXSW_CMD_OPCODE_ACCESS_REG)
36 #define MLXSW_I2C_PUSH_CMD (MLXSW_I2C_GO_BIT | MLXSW_I2C_SET_CMD)
37 #define MLXSW_I2C_TLV_HDR_SIZE 0x10
38 #define MLXSW_I2C_ADDR_WIDTH 4
39 #define MLXSW_I2C_PUSH_CMD_SIZE (MLXSW_I2C_ADDR_WIDTH + 4)
40 #define MLXSW_I2C_SET_EVENT_CMD (MLXSW_I2C_EVENT_BIT)
41 #define MLXSW_I2C_PUSH_EVENT_CMD (MLXSW_I2C_GO_BIT | \
42 MLXSW_I2C_SET_EVENT_CMD)
43 #define MLXSW_I2C_READ_SEMA_SIZE 4
44 #define MLXSW_I2C_PREP_SIZE (MLXSW_I2C_ADDR_WIDTH + 28)
45 #define MLXSW_I2C_MBOX_SIZE 20
46 #define MLXSW_I2C_MBOX_OUT_PARAM_OFF 12
47 #define MLXSW_I2C_MBOX_OFFSET_BITS 20
48 #define MLXSW_I2C_MBOX_SIZE_BITS 12
49 #define MLXSW_I2C_ADDR_BUF_SIZE 4
50 #define MLXSW_I2C_BLK_DEF 32
51 #define MLXSW_I2C_BLK_MAX 100
52 #define MLXSW_I2C_RETRY 5
53 #define MLXSW_I2C_TIMEOUT_MSECS 5000
54 #define MLXSW_I2C_MAX_DATA_SIZE 256
55
56 /* Driver can be initialized by kernel platform driver or from the user
57 * space. In the first case IRQ line number is passed through the platform
58 * data, otherwise default IRQ line is to be used. Default IRQ is relevant
59 * only for specific I2C slave address, allowing 3.4 MHz I2C path to the chip
60 * (special hardware feature for I2C acceleration).
61 */
62 #define MLXSW_I2C_DEFAULT_IRQ 17
63 #define MLXSW_FAST_I2C_SLAVE 0x37
64
65 /**
66 * struct mlxsw_i2c - device private data:
67 * @cmd: command attributes;
68 * @cmd.mb_size_in: input mailbox size;
69 * @cmd.mb_off_in: input mailbox offset in register space;
70 * @cmd.mb_size_out: output mailbox size;
71 * @cmd.mb_off_out: output mailbox offset in register space;
72 * @cmd.lock: command execution lock;
73 * @dev: I2C device;
74 * @core: switch core pointer;
75 * @bus_info: bus info block;
76 * @block_size: maximum block size allowed to pass to under layer;
77 * @pdata: device platform data;
78 * @irq_work: interrupts work item;
79 * @irq: IRQ line number;
80 */
81 struct mlxsw_i2c {
82 struct {
83 u32 mb_size_in;
84 u32 mb_off_in;
85 u32 mb_size_out;
86 u32 mb_off_out;
87 struct mutex lock;
88 } cmd;
89 struct device *dev;
90 struct mlxsw_core *core;
91 struct mlxsw_bus_info bus_info;
92 u16 block_size;
93 struct mlxreg_core_hotplug_platform_data *pdata;
94 struct work_struct irq_work;
95 int irq;
96 };
97
98 #define MLXSW_I2C_READ_MSG(_client, _addr_buf, _buf, _len) { \
99 { .addr = (_client)->addr, \
100 .buf = (_addr_buf), \
101 .len = MLXSW_I2C_ADDR_BUF_SIZE, \
102 .flags = 0 }, \
103 { .addr = (_client)->addr, \
104 .buf = (_buf), \
105 .len = (_len), \
106 .flags = I2C_M_RD } }
107
108 #define MLXSW_I2C_WRITE_MSG(_client, _buf, _len) \
109 { .addr = (_client)->addr, \
110 .buf = (u8 *)(_buf), \
111 .len = (_len), \
112 .flags = 0 }
113
114 /* Routine converts in and out mail boxes offset and size. */
115 static inline void
mlxsw_i2c_convert_mbox(struct mlxsw_i2c * mlxsw_i2c,u8 * buf)116 mlxsw_i2c_convert_mbox(struct mlxsw_i2c *mlxsw_i2c, u8 *buf)
117 {
118 u32 tmp;
119
120 /* Local in/out mailboxes: 20 bits for offset, 12 for size */
121 tmp = be32_to_cpup((__be32 *) buf);
122 mlxsw_i2c->cmd.mb_off_in = tmp &
123 GENMASK(MLXSW_I2C_MBOX_OFFSET_BITS - 1, 0);
124 mlxsw_i2c->cmd.mb_size_in = (tmp & GENMASK(31,
125 MLXSW_I2C_MBOX_OFFSET_BITS)) >>
126 MLXSW_I2C_MBOX_OFFSET_BITS;
127
128 tmp = be32_to_cpup((__be32 *) (buf + MLXSW_I2C_ADDR_WIDTH));
129 mlxsw_i2c->cmd.mb_off_out = tmp &
130 GENMASK(MLXSW_I2C_MBOX_OFFSET_BITS - 1, 0);
131 mlxsw_i2c->cmd.mb_size_out = (tmp & GENMASK(31,
132 MLXSW_I2C_MBOX_OFFSET_BITS)) >>
133 MLXSW_I2C_MBOX_OFFSET_BITS;
134 }
135
136 /* Routine obtains register size from mail box buffer. */
mlxsw_i2c_get_reg_size(u8 * in_mbox)137 static inline int mlxsw_i2c_get_reg_size(u8 *in_mbox)
138 {
139 u16 tmp = be16_to_cpup((__be16 *) (in_mbox + MLXSW_I2C_TLV_HDR_SIZE));
140
141 return (tmp & 0x7ff) * 4 + MLXSW_I2C_TLV_HDR_SIZE;
142 }
143
144 /* Routine sets I2C device internal offset in the transaction buffer. */
mlxsw_i2c_set_slave_addr(u8 * buf,u32 off)145 static inline void mlxsw_i2c_set_slave_addr(u8 *buf, u32 off)
146 {
147 __be32 *val = (__be32 *) buf;
148
149 *val = htonl(off);
150 }
151
152 /* Routine waits until go bit is cleared. */
mlxsw_i2c_wait_go_bit(struct i2c_client * client,struct mlxsw_i2c * mlxsw_i2c,u8 * p_status)153 static int mlxsw_i2c_wait_go_bit(struct i2c_client *client,
154 struct mlxsw_i2c *mlxsw_i2c, u8 *p_status)
155 {
156 u8 addr_buf[MLXSW_I2C_ADDR_BUF_SIZE];
157 u8 buf[MLXSW_I2C_READ_SEMA_SIZE];
158 int len = MLXSW_I2C_READ_SEMA_SIZE;
159 struct i2c_msg read_sema[] =
160 MLXSW_I2C_READ_MSG(client, addr_buf, buf, len);
161 bool wait_done = false;
162 unsigned long end;
163 int i = 0, err;
164
165 mlxsw_i2c_set_slave_addr(addr_buf, MLXSW_I2C_CIR2_OFF_STATUS);
166
167 end = jiffies + msecs_to_jiffies(MLXSW_I2C_TIMEOUT_MSECS);
168 do {
169 u32 ctrl;
170
171 err = i2c_transfer(client->adapter, read_sema,
172 ARRAY_SIZE(read_sema));
173
174 ctrl = be32_to_cpu(*(__be32 *) buf);
175 if (err == ARRAY_SIZE(read_sema)) {
176 if (!(ctrl & MLXSW_I2C_GO_BIT)) {
177 wait_done = true;
178 *p_status = ctrl >>
179 MLXSW_I2C_CIR_CTRL_STATUS_SHIFT;
180 break;
181 }
182 }
183 cond_resched();
184 } while ((time_before(jiffies, end)) || (i++ < MLXSW_I2C_RETRY));
185
186 if (wait_done) {
187 if (*p_status)
188 err = -EIO;
189 } else {
190 return -ETIMEDOUT;
191 }
192
193 return err > 0 ? 0 : err;
194 }
195
196 /* Routine posts a command to ASIC through mail box. */
mlxsw_i2c_write_cmd(struct i2c_client * client,struct mlxsw_i2c * mlxsw_i2c,int immediate)197 static int mlxsw_i2c_write_cmd(struct i2c_client *client,
198 struct mlxsw_i2c *mlxsw_i2c,
199 int immediate)
200 {
201 __be32 push_cmd_buf[MLXSW_I2C_PUSH_CMD_SIZE / 4] = {
202 0, cpu_to_be32(MLXSW_I2C_PUSH_IMM_CMD)
203 };
204 __be32 prep_cmd_buf[MLXSW_I2C_PREP_SIZE / 4] = {
205 0, 0, 0, 0, 0, 0,
206 cpu_to_be32(client->adapter->nr & 0xffff),
207 cpu_to_be32(MLXSW_I2C_SET_IMM_CMD)
208 };
209 struct i2c_msg push_cmd =
210 MLXSW_I2C_WRITE_MSG(client, push_cmd_buf,
211 MLXSW_I2C_PUSH_CMD_SIZE);
212 struct i2c_msg prep_cmd =
213 MLXSW_I2C_WRITE_MSG(client, prep_cmd_buf, MLXSW_I2C_PREP_SIZE);
214 int err;
215
216 if (!immediate) {
217 push_cmd_buf[1] = cpu_to_be32(MLXSW_I2C_PUSH_CMD);
218 prep_cmd_buf[7] = cpu_to_be32(MLXSW_I2C_SET_CMD);
219 }
220 mlxsw_i2c_set_slave_addr((u8 *)prep_cmd_buf,
221 MLXSW_I2C_CIR2_BASE);
222 mlxsw_i2c_set_slave_addr((u8 *)push_cmd_buf,
223 MLXSW_I2C_CIR2_OFF_STATUS);
224
225 /* Prepare Command Interface Register for transaction */
226 err = i2c_transfer(client->adapter, &prep_cmd, 1);
227 if (err < 0)
228 return err;
229 else if (err != 1)
230 return -EIO;
231
232 /* Write out Command Interface Register GO bit to push transaction */
233 err = i2c_transfer(client->adapter, &push_cmd, 1);
234 if (err < 0)
235 return err;
236 else if (err != 1)
237 return -EIO;
238
239 return 0;
240 }
241
242 /* Routine posts initialization command to ASIC through mail box. */
243 static int
mlxsw_i2c_write_init_cmd(struct i2c_client * client,struct mlxsw_i2c * mlxsw_i2c,u16 opcode,u32 in_mod)244 mlxsw_i2c_write_init_cmd(struct i2c_client *client,
245 struct mlxsw_i2c *mlxsw_i2c, u16 opcode, u32 in_mod)
246 {
247 __be32 push_cmd_buf[MLXSW_I2C_PUSH_CMD_SIZE / 4] = {
248 0, cpu_to_be32(MLXSW_I2C_PUSH_EVENT_CMD)
249 };
250 __be32 prep_cmd_buf[MLXSW_I2C_PREP_SIZE / 4] = {
251 0, 0, 0, 0, 0, 0,
252 cpu_to_be32(client->adapter->nr & 0xffff),
253 cpu_to_be32(MLXSW_I2C_SET_EVENT_CMD)
254 };
255 struct i2c_msg push_cmd =
256 MLXSW_I2C_WRITE_MSG(client, push_cmd_buf,
257 MLXSW_I2C_PUSH_CMD_SIZE);
258 struct i2c_msg prep_cmd =
259 MLXSW_I2C_WRITE_MSG(client, prep_cmd_buf, MLXSW_I2C_PREP_SIZE);
260 u8 status;
261 int err;
262
263 push_cmd_buf[1] = cpu_to_be32(MLXSW_I2C_PUSH_EVENT_CMD | opcode);
264 prep_cmd_buf[3] = cpu_to_be32(in_mod);
265 prep_cmd_buf[7] = cpu_to_be32(MLXSW_I2C_GO_BIT | opcode);
266 mlxsw_i2c_set_slave_addr((u8 *)prep_cmd_buf,
267 MLXSW_I2C_CIR2_BASE);
268 mlxsw_i2c_set_slave_addr((u8 *)push_cmd_buf,
269 MLXSW_I2C_CIR2_OFF_STATUS);
270
271 /* Prepare Command Interface Register for transaction */
272 err = i2c_transfer(client->adapter, &prep_cmd, 1);
273 if (err < 0)
274 return err;
275 else if (err != 1)
276 return -EIO;
277
278 /* Write out Command Interface Register GO bit to push transaction */
279 err = i2c_transfer(client->adapter, &push_cmd, 1);
280 if (err < 0)
281 return err;
282 else if (err != 1)
283 return -EIO;
284
285 /* Wait until go bit is cleared. */
286 err = mlxsw_i2c_wait_go_bit(client, mlxsw_i2c, &status);
287 if (err) {
288 dev_err(&client->dev, "HW semaphore is not released");
289 return err;
290 }
291
292 /* Validate transaction completion status. */
293 if (status) {
294 dev_err(&client->dev, "Bad transaction completion status %x\n",
295 status);
296 return -EIO;
297 }
298
299 return 0;
300 }
301
302 /* Routine obtains mail box offsets from ASIC register space. */
mlxsw_i2c_get_mbox(struct i2c_client * client,struct mlxsw_i2c * mlxsw_i2c)303 static int mlxsw_i2c_get_mbox(struct i2c_client *client,
304 struct mlxsw_i2c *mlxsw_i2c)
305 {
306 u8 addr_buf[MLXSW_I2C_ADDR_BUF_SIZE];
307 u8 buf[MLXSW_I2C_MBOX_SIZE];
308 struct i2c_msg mbox_cmd[] =
309 MLXSW_I2C_READ_MSG(client, addr_buf, buf, MLXSW_I2C_MBOX_SIZE);
310 int err;
311
312 /* Read mail boxes offsets. */
313 mlxsw_i2c_set_slave_addr(addr_buf, MLXSW_I2C_CIR2_BASE);
314 err = i2c_transfer(client->adapter, mbox_cmd, 2);
315 if (err != 2) {
316 dev_err(&client->dev, "Could not obtain mail boxes\n");
317 if (!err)
318 return -EIO;
319 else
320 return err;
321 }
322
323 /* Convert mail boxes. */
324 mlxsw_i2c_convert_mbox(mlxsw_i2c, &buf[MLXSW_I2C_MBOX_OUT_PARAM_OFF]);
325
326 return err;
327 }
328
329 /* Routine sends I2C write transaction to ASIC device. */
330 static int
mlxsw_i2c_write(struct device * dev,size_t in_mbox_size,u8 * in_mbox,int num,u8 * p_status)331 mlxsw_i2c_write(struct device *dev, size_t in_mbox_size, u8 *in_mbox, int num,
332 u8 *p_status)
333 {
334 struct i2c_client *client = to_i2c_client(dev);
335 struct mlxsw_i2c *mlxsw_i2c = i2c_get_clientdata(client);
336 unsigned long timeout = msecs_to_jiffies(MLXSW_I2C_TIMEOUT_MSECS);
337 int off = mlxsw_i2c->cmd.mb_off_in, chunk_size, i, j;
338 unsigned long end;
339 u8 *tran_buf;
340 struct i2c_msg write_tran =
341 MLXSW_I2C_WRITE_MSG(client, NULL, MLXSW_I2C_PUSH_CMD_SIZE);
342 int err;
343
344 tran_buf = kmalloc(mlxsw_i2c->block_size + MLXSW_I2C_ADDR_BUF_SIZE,
345 GFP_KERNEL);
346 if (!tran_buf)
347 return -ENOMEM;
348
349 write_tran.buf = tran_buf;
350 for (i = 0; i < num; i++) {
351 chunk_size = (in_mbox_size > mlxsw_i2c->block_size) ?
352 mlxsw_i2c->block_size : in_mbox_size;
353 write_tran.len = MLXSW_I2C_ADDR_WIDTH + chunk_size;
354 mlxsw_i2c_set_slave_addr(tran_buf, off);
355 memcpy(&tran_buf[MLXSW_I2C_ADDR_BUF_SIZE], in_mbox +
356 mlxsw_i2c->block_size * i, chunk_size);
357
358 j = 0;
359 end = jiffies + timeout;
360 do {
361 err = i2c_transfer(client->adapter, &write_tran, 1);
362 if (err == 1)
363 break;
364
365 cond_resched();
366 } while ((time_before(jiffies, end)) ||
367 (j++ < MLXSW_I2C_RETRY));
368
369 if (err != 1) {
370 if (!err) {
371 err = -EIO;
372 goto mlxsw_i2c_write_exit;
373 }
374 }
375
376 off += chunk_size;
377 in_mbox_size -= chunk_size;
378 }
379
380 /* Prepare and write out Command Interface Register for transaction. */
381 err = mlxsw_i2c_write_cmd(client, mlxsw_i2c, 0);
382 if (err) {
383 dev_err(&client->dev, "Could not start transaction");
384 err = -EIO;
385 goto mlxsw_i2c_write_exit;
386 }
387
388 /* Wait until go bit is cleared. */
389 err = mlxsw_i2c_wait_go_bit(client, mlxsw_i2c, p_status);
390 if (err) {
391 dev_err(&client->dev, "HW semaphore is not released");
392 goto mlxsw_i2c_write_exit;
393 }
394
395 /* Validate transaction completion status. */
396 if (*p_status) {
397 dev_err(&client->dev, "Bad transaction completion status %x\n",
398 *p_status);
399 err = -EIO;
400 }
401
402 mlxsw_i2c_write_exit:
403 kfree(tran_buf);
404 return err;
405 }
406
407 /* Routine executes I2C command. */
408 static int
mlxsw_i2c_cmd(struct device * dev,u16 opcode,u32 in_mod,size_t in_mbox_size,u8 * in_mbox,size_t out_mbox_size,u8 * out_mbox,u8 * status)409 mlxsw_i2c_cmd(struct device *dev, u16 opcode, u32 in_mod, size_t in_mbox_size,
410 u8 *in_mbox, size_t out_mbox_size, u8 *out_mbox, u8 *status)
411 {
412 struct i2c_client *client = to_i2c_client(dev);
413 struct mlxsw_i2c *mlxsw_i2c = i2c_get_clientdata(client);
414 unsigned long timeout = msecs_to_jiffies(MLXSW_I2C_TIMEOUT_MSECS);
415 u8 tran_buf[MLXSW_I2C_ADDR_BUF_SIZE];
416 int num, chunk_size, reg_size, i, j;
417 int off = mlxsw_i2c->cmd.mb_off_out;
418 unsigned long end;
419 struct i2c_msg read_tran[] =
420 MLXSW_I2C_READ_MSG(client, tran_buf, NULL, 0);
421 int err;
422
423 WARN_ON(in_mbox_size % sizeof(u32) || out_mbox_size % sizeof(u32));
424
425 if (in_mbox) {
426 reg_size = mlxsw_i2c_get_reg_size(in_mbox);
427 num = reg_size / mlxsw_i2c->block_size;
428 if (reg_size % mlxsw_i2c->block_size)
429 num++;
430
431 if (mutex_lock_interruptible(&mlxsw_i2c->cmd.lock) < 0) {
432 dev_err(&client->dev, "Could not acquire lock");
433 return -EINVAL;
434 }
435
436 err = mlxsw_i2c_write(dev, reg_size, in_mbox, num, status);
437 if (err)
438 goto cmd_fail;
439
440 /* No out mailbox is case of write transaction. */
441 if (!out_mbox) {
442 mutex_unlock(&mlxsw_i2c->cmd.lock);
443 return 0;
444 }
445 } else {
446 /* No input mailbox is case of initialization query command. */
447 reg_size = MLXSW_I2C_MAX_DATA_SIZE;
448 num = DIV_ROUND_UP(reg_size, mlxsw_i2c->block_size);
449
450 if (mutex_lock_interruptible(&mlxsw_i2c->cmd.lock) < 0) {
451 dev_err(&client->dev, "Could not acquire lock");
452 return -EINVAL;
453 }
454
455 err = mlxsw_i2c_write_init_cmd(client, mlxsw_i2c, opcode,
456 in_mod);
457 if (err)
458 goto cmd_fail;
459 }
460
461 /* Send read transaction to get output mailbox content. */
462 read_tran[1].buf = out_mbox;
463 for (i = 0; i < num; i++) {
464 chunk_size = (reg_size > mlxsw_i2c->block_size) ?
465 mlxsw_i2c->block_size : reg_size;
466 read_tran[1].len = chunk_size;
467 mlxsw_i2c_set_slave_addr(tran_buf, off);
468
469 j = 0;
470 end = jiffies + timeout;
471 do {
472 err = i2c_transfer(client->adapter, read_tran,
473 ARRAY_SIZE(read_tran));
474 if (err == ARRAY_SIZE(read_tran))
475 break;
476
477 cond_resched();
478 } while ((time_before(jiffies, end)) ||
479 (j++ < MLXSW_I2C_RETRY));
480
481 if (err != ARRAY_SIZE(read_tran)) {
482 if (!err)
483 err = -EIO;
484
485 goto cmd_fail;
486 }
487
488 off += chunk_size;
489 reg_size -= chunk_size;
490 read_tran[1].buf += chunk_size;
491 }
492
493 mutex_unlock(&mlxsw_i2c->cmd.lock);
494
495 return 0;
496
497 cmd_fail:
498 mutex_unlock(&mlxsw_i2c->cmd.lock);
499 return err;
500 }
501
mlxsw_i2c_cmd_exec(void * bus_priv,u16 opcode,u8 opcode_mod,u32 in_mod,bool out_mbox_direct,char * in_mbox,size_t in_mbox_size,char * out_mbox,size_t out_mbox_size,u8 * status)502 static int mlxsw_i2c_cmd_exec(void *bus_priv, u16 opcode, u8 opcode_mod,
503 u32 in_mod, bool out_mbox_direct,
504 char *in_mbox, size_t in_mbox_size,
505 char *out_mbox, size_t out_mbox_size,
506 u8 *status)
507 {
508 struct mlxsw_i2c *mlxsw_i2c = bus_priv;
509
510 return mlxsw_i2c_cmd(mlxsw_i2c->dev, opcode, in_mod, in_mbox_size,
511 in_mbox, out_mbox_size, out_mbox, status);
512 }
513
mlxsw_i2c_skb_transmit_busy(void * bus_priv,const struct mlxsw_tx_info * tx_info)514 static bool mlxsw_i2c_skb_transmit_busy(void *bus_priv,
515 const struct mlxsw_tx_info *tx_info)
516 {
517 return false;
518 }
519
mlxsw_i2c_skb_transmit(void * bus_priv,struct sk_buff * skb,const struct mlxsw_tx_info * tx_info)520 static int mlxsw_i2c_skb_transmit(void *bus_priv, struct sk_buff *skb,
521 const struct mlxsw_tx_info *tx_info)
522 {
523 return 0;
524 }
525
526 static int
mlxsw_i2c_init(void * bus_priv,struct mlxsw_core * mlxsw_core,const struct mlxsw_config_profile * profile,struct mlxsw_res * res)527 mlxsw_i2c_init(void *bus_priv, struct mlxsw_core *mlxsw_core,
528 const struct mlxsw_config_profile *profile,
529 struct mlxsw_res *res)
530 {
531 struct mlxsw_i2c *mlxsw_i2c = bus_priv;
532 char *mbox;
533 int err;
534
535 mlxsw_i2c->core = mlxsw_core;
536
537 mbox = mlxsw_cmd_mbox_alloc();
538 if (!mbox)
539 return -ENOMEM;
540
541 err = mlxsw_cmd_query_fw(mlxsw_core, mbox);
542 if (err)
543 goto mbox_put;
544
545 mlxsw_i2c->bus_info.fw_rev.major =
546 mlxsw_cmd_mbox_query_fw_fw_rev_major_get(mbox);
547 mlxsw_i2c->bus_info.fw_rev.minor =
548 mlxsw_cmd_mbox_query_fw_fw_rev_minor_get(mbox);
549 mlxsw_i2c->bus_info.fw_rev.subminor =
550 mlxsw_cmd_mbox_query_fw_fw_rev_subminor_get(mbox);
551
552 err = mlxsw_core_resources_query(mlxsw_core, mbox, res);
553
554 mbox_put:
555 mlxsw_cmd_mbox_free(mbox);
556 return err;
557 }
558
mlxsw_i2c_fini(void * bus_priv)559 static void mlxsw_i2c_fini(void *bus_priv)
560 {
561 struct mlxsw_i2c *mlxsw_i2c = bus_priv;
562
563 mlxsw_i2c->core = NULL;
564 }
565
mlxsw_i2c_work_handler(struct work_struct * work)566 static void mlxsw_i2c_work_handler(struct work_struct *work)
567 {
568 struct mlxsw_i2c *mlxsw_i2c;
569
570 mlxsw_i2c = container_of(work, struct mlxsw_i2c, irq_work);
571 mlxsw_core_irq_event_handlers_call(mlxsw_i2c->core);
572 }
573
mlxsw_i2c_irq_handler(int irq,void * dev)574 static irqreturn_t mlxsw_i2c_irq_handler(int irq, void *dev)
575 {
576 struct mlxsw_i2c *mlxsw_i2c = dev;
577
578 mlxsw_core_schedule_work(&mlxsw_i2c->irq_work);
579
580 /* Interrupt handler shares IRQ line with 'main' interrupt handler.
581 * Return here IRQ_NONE, while main handler will return IRQ_HANDLED.
582 */
583 return IRQ_NONE;
584 }
585
mlxsw_i2c_irq_init(struct mlxsw_i2c * mlxsw_i2c,u8 addr)586 static int mlxsw_i2c_irq_init(struct mlxsw_i2c *mlxsw_i2c, u8 addr)
587 {
588 int err;
589
590 /* Initialize interrupt handler if system hotplug driver is reachable,
591 * otherwise interrupt line is not enabled and interrupts will not be
592 * raised to CPU. Also request_irq() call will be not valid.
593 */
594 if (!IS_REACHABLE(CONFIG_MLXREG_HOTPLUG))
595 return 0;
596
597 /* Set default interrupt line. */
598 if (mlxsw_i2c->pdata && mlxsw_i2c->pdata->irq)
599 mlxsw_i2c->irq = mlxsw_i2c->pdata->irq;
600 else if (addr == MLXSW_FAST_I2C_SLAVE)
601 mlxsw_i2c->irq = MLXSW_I2C_DEFAULT_IRQ;
602
603 if (!mlxsw_i2c->irq)
604 return 0;
605
606 INIT_WORK(&mlxsw_i2c->irq_work, mlxsw_i2c_work_handler);
607 err = request_irq(mlxsw_i2c->irq, mlxsw_i2c_irq_handler,
608 IRQF_TRIGGER_FALLING | IRQF_SHARED, "mlxsw-i2c",
609 mlxsw_i2c);
610 if (err) {
611 dev_err(mlxsw_i2c->bus_info.dev, "Failed to request irq: %d\n",
612 err);
613 return err;
614 }
615
616 return 0;
617 }
618
mlxsw_i2c_irq_fini(struct mlxsw_i2c * mlxsw_i2c)619 static void mlxsw_i2c_irq_fini(struct mlxsw_i2c *mlxsw_i2c)
620 {
621 if (!IS_REACHABLE(CONFIG_MLXREG_HOTPLUG) || !mlxsw_i2c->irq)
622 return;
623 cancel_work_sync(&mlxsw_i2c->irq_work);
624 free_irq(mlxsw_i2c->irq, mlxsw_i2c);
625 }
626
627 static const struct mlxsw_bus mlxsw_i2c_bus = {
628 .kind = "i2c",
629 .init = mlxsw_i2c_init,
630 .fini = mlxsw_i2c_fini,
631 .skb_transmit_busy = mlxsw_i2c_skb_transmit_busy,
632 .skb_transmit = mlxsw_i2c_skb_transmit,
633 .cmd_exec = mlxsw_i2c_cmd_exec,
634 };
635
mlxsw_i2c_probe(struct i2c_client * client)636 static int mlxsw_i2c_probe(struct i2c_client *client)
637 {
638 const struct i2c_device_id *id = i2c_client_get_device_id(client);
639 const struct i2c_adapter_quirks *quirks = client->adapter->quirks;
640 struct mlxsw_i2c *mlxsw_i2c;
641 u8 status;
642 int err;
643
644 mlxsw_i2c = devm_kzalloc(&client->dev, sizeof(*mlxsw_i2c), GFP_KERNEL);
645 if (!mlxsw_i2c)
646 return -ENOMEM;
647
648 if (quirks) {
649 if ((quirks->max_read_len &&
650 quirks->max_read_len < MLXSW_I2C_BLK_DEF) ||
651 (quirks->max_write_len &&
652 quirks->max_write_len < MLXSW_I2C_BLK_DEF)) {
653 dev_err(&client->dev, "Insufficient transaction buffer length\n");
654 return -EOPNOTSUPP;
655 }
656
657 mlxsw_i2c->block_size = min_t(u16, MLXSW_I2C_BLK_MAX,
658 min_t(u16, quirks->max_read_len,
659 quirks->max_write_len));
660 } else {
661 mlxsw_i2c->block_size = MLXSW_I2C_BLK_DEF;
662 }
663
664 i2c_set_clientdata(client, mlxsw_i2c);
665 mutex_init(&mlxsw_i2c->cmd.lock);
666
667 /* In order to use mailboxes through the i2c, special area is reserved
668 * on the i2c address space that can be used for input and output
669 * mailboxes. Such mailboxes are called local mailboxes. When using a
670 * local mailbox, software should specify 0 as the Input/Output
671 * parameters. The location of the Local Mailbox addresses on the i2c
672 * space can be retrieved through the QUERY_FW command.
673 * For this purpose QUERY_FW is to be issued with opcode modifier equal
674 * 0x01. For such command the output parameter is an immediate value.
675 * Here QUERY_FW command is invoked for ASIC probing and for getting
676 * local mailboxes addresses from immedate output parameters.
677 */
678
679 /* Prepare and write out Command Interface Register for transaction */
680 err = mlxsw_i2c_write_cmd(client, mlxsw_i2c, 1);
681 if (err) {
682 dev_err(&client->dev, "Could not start transaction");
683 goto errout;
684 }
685
686 /* Wait until go bit is cleared. */
687 err = mlxsw_i2c_wait_go_bit(client, mlxsw_i2c, &status);
688 if (err) {
689 dev_err(&client->dev, "HW semaphore is not released");
690 goto errout;
691 }
692
693 /* Validate transaction completion status. */
694 if (status) {
695 dev_err(&client->dev, "Bad transaction completion status %x\n",
696 status);
697 err = -EIO;
698 goto errout;
699 }
700
701 /* Get mailbox offsets. */
702 err = mlxsw_i2c_get_mbox(client, mlxsw_i2c);
703 if (err < 0) {
704 dev_err(&client->dev, "Fail to get mailboxes\n");
705 goto errout;
706 }
707
708 dev_info(&client->dev, "%s mb size=%x off=0x%08x out mb size=%x off=0x%08x\n",
709 id->name, mlxsw_i2c->cmd.mb_size_in,
710 mlxsw_i2c->cmd.mb_off_in, mlxsw_i2c->cmd.mb_size_out,
711 mlxsw_i2c->cmd.mb_off_out);
712
713 /* Register device bus. */
714 mlxsw_i2c->bus_info.device_kind = id->name;
715 mlxsw_i2c->bus_info.device_name = client->name;
716 mlxsw_i2c->bus_info.dev = &client->dev;
717 mlxsw_i2c->bus_info.low_frequency = true;
718 mlxsw_i2c->dev = &client->dev;
719 mlxsw_i2c->pdata = client->dev.platform_data;
720
721 err = mlxsw_i2c_irq_init(mlxsw_i2c, client->addr);
722 if (err)
723 goto errout;
724
725 err = mlxsw_core_bus_device_register(&mlxsw_i2c->bus_info,
726 &mlxsw_i2c_bus, mlxsw_i2c, false,
727 NULL, NULL);
728 if (err) {
729 dev_err(&client->dev, "Fail to register core bus\n");
730 goto err_bus_device_register;
731 }
732
733 return 0;
734
735 err_bus_device_register:
736 mlxsw_i2c_irq_fini(mlxsw_i2c);
737 errout:
738 mutex_destroy(&mlxsw_i2c->cmd.lock);
739 i2c_set_clientdata(client, NULL);
740
741 return err;
742 }
743
mlxsw_i2c_remove(struct i2c_client * client)744 static void mlxsw_i2c_remove(struct i2c_client *client)
745 {
746 struct mlxsw_i2c *mlxsw_i2c = i2c_get_clientdata(client);
747
748 mlxsw_core_bus_device_unregister(mlxsw_i2c->core, false);
749 mlxsw_i2c_irq_fini(mlxsw_i2c);
750 mutex_destroy(&mlxsw_i2c->cmd.lock);
751 }
752
mlxsw_i2c_driver_register(struct i2c_driver * i2c_driver)753 int mlxsw_i2c_driver_register(struct i2c_driver *i2c_driver)
754 {
755 i2c_driver->probe = mlxsw_i2c_probe;
756 i2c_driver->remove = mlxsw_i2c_remove;
757 return i2c_add_driver(i2c_driver);
758 }
759 EXPORT_SYMBOL(mlxsw_i2c_driver_register);
760
mlxsw_i2c_driver_unregister(struct i2c_driver * i2c_driver)761 void mlxsw_i2c_driver_unregister(struct i2c_driver *i2c_driver)
762 {
763 i2c_del_driver(i2c_driver);
764 }
765 EXPORT_SYMBOL(mlxsw_i2c_driver_unregister);
766
767 MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
768 MODULE_DESCRIPTION("Mellanox switch I2C interface driver");
769 MODULE_LICENSE("Dual BSD/GPL");
770