1 /*
2 * Intel 82860 Memory Controller kernel module
3 * (C) 2005 Red Hat (http://www.redhat.com)
4 * This file may be distributed under the terms of the
5 * GNU General Public License.
6 *
7 * Written by Ben Woodard <woodard@redhat.com>
8 * shamelessly copied from and based upon the edac_i82875 driver
9 * by Thayne Harbaugh of Linux Networx. (http://lnxi.com)
10 */
11
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/pci.h>
15 #include <linux/pci_ids.h>
16 #include <linux/edac.h>
17 #include "edac_module.h"
18
19 #define EDAC_MOD_STR "i82860_edac"
20
21 #define i82860_printk(level, fmt, arg...) \
22 edac_printk(level, "i82860", fmt, ##arg)
23
24 #define i82860_mc_printk(mci, level, fmt, arg...) \
25 edac_mc_chipset_printk(mci, level, "i82860", fmt, ##arg)
26
27 #ifndef PCI_DEVICE_ID_INTEL_82860_0
28 #define PCI_DEVICE_ID_INTEL_82860_0 0x2531
29 #endif /* PCI_DEVICE_ID_INTEL_82860_0 */
30
31 #define I82860_MCHCFG 0x50
32 #define I82860_GBA 0x60
33 #define I82860_GBA_MASK 0x7FF
34 #define I82860_GBA_SHIFT 24
35 #define I82860_ERRSTS 0xC8
36 #define I82860_EAP 0xE4
37 #define I82860_DERRCTL_STS 0xE2
38
39 enum i82860_chips {
40 I82860 = 0,
41 };
42
43 struct i82860_dev_info {
44 const char *ctl_name;
45 };
46
47 struct i82860_error_info {
48 u16 errsts;
49 u32 eap;
50 u16 derrsyn;
51 u16 errsts2;
52 };
53
54 static const struct i82860_dev_info i82860_devs[] = {
55 [I82860] = {
56 .ctl_name = "i82860"},
57 };
58
59 static struct pci_dev *mci_pdev; /* init dev: in case that AGP code
60 * has already registered driver
61 */
62 static struct edac_pci_ctl_info *i82860_pci;
63
i82860_get_error_info(struct mem_ctl_info * mci,struct i82860_error_info * info)64 static void i82860_get_error_info(struct mem_ctl_info *mci,
65 struct i82860_error_info *info)
66 {
67 struct pci_dev *pdev;
68
69 pdev = to_pci_dev(mci->pdev);
70
71 /*
72 * This is a mess because there is no atomic way to read all the
73 * registers at once and the registers can transition from CE being
74 * overwritten by UE.
75 */
76 pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts);
77 pci_read_config_dword(pdev, I82860_EAP, &info->eap);
78 pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn);
79 pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts2);
80
81 pci_write_bits16(pdev, I82860_ERRSTS, 0x0003, 0x0003);
82
83 /*
84 * If the error is the same for both reads then the first set of reads
85 * is valid. If there is a change then there is a CE no info and the
86 * second set of reads is valid and should be UE info.
87 */
88 if (!(info->errsts2 & 0x0003))
89 return;
90
91 if ((info->errsts ^ info->errsts2) & 0x0003) {
92 pci_read_config_dword(pdev, I82860_EAP, &info->eap);
93 pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn);
94 }
95 }
96
i82860_process_error_info(struct mem_ctl_info * mci,struct i82860_error_info * info,int handle_errors)97 static int i82860_process_error_info(struct mem_ctl_info *mci,
98 struct i82860_error_info *info,
99 int handle_errors)
100 {
101 struct dimm_info *dimm;
102 int row;
103
104 if (!(info->errsts2 & 0x0003))
105 return 0;
106
107 if (!handle_errors)
108 return 1;
109
110 if ((info->errsts ^ info->errsts2) & 0x0003) {
111 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
112 -1, -1, -1, "UE overwrote CE", "");
113 info->errsts = info->errsts2;
114 }
115
116 info->eap >>= PAGE_SHIFT;
117 row = edac_mc_find_csrow_by_page(mci, info->eap);
118 dimm = mci->csrows[row]->channels[0]->dimm;
119
120 if (info->errsts & 0x0002)
121 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
122 info->eap, 0, 0,
123 dimm->location[0], dimm->location[1], -1,
124 "i82860 UE", "");
125 else
126 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
127 info->eap, 0, info->derrsyn,
128 dimm->location[0], dimm->location[1], -1,
129 "i82860 CE", "");
130
131 return 1;
132 }
133
i82860_check(struct mem_ctl_info * mci)134 static void i82860_check(struct mem_ctl_info *mci)
135 {
136 struct i82860_error_info info;
137
138 i82860_get_error_info(mci, &info);
139 i82860_process_error_info(mci, &info, 1);
140 }
141
i82860_init_csrows(struct mem_ctl_info * mci,struct pci_dev * pdev)142 static void i82860_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev)
143 {
144 unsigned long last_cumul_size;
145 u16 mchcfg_ddim; /* DRAM Data Integrity Mode 0=none, 2=edac */
146 u16 value;
147 u32 cumul_size;
148 struct csrow_info *csrow;
149 struct dimm_info *dimm;
150 int index;
151
152 pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim);
153 mchcfg_ddim = mchcfg_ddim & 0x180;
154 last_cumul_size = 0;
155
156 /* The group row boundary (GRA) reg values are boundary address
157 * for each DRAM row with a granularity of 16MB. GRA regs are
158 * cumulative; therefore GRA15 will contain the total memory contained
159 * in all eight rows.
160 */
161 for (index = 0; index < mci->nr_csrows; index++) {
162 csrow = mci->csrows[index];
163 dimm = csrow->channels[0]->dimm;
164
165 pci_read_config_word(pdev, I82860_GBA + index * 2, &value);
166 cumul_size = (value & I82860_GBA_MASK) <<
167 (I82860_GBA_SHIFT - PAGE_SHIFT);
168 edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size);
169
170 if (cumul_size == last_cumul_size)
171 continue; /* not populated */
172
173 csrow->first_page = last_cumul_size;
174 csrow->last_page = cumul_size - 1;
175 dimm->nr_pages = cumul_size - last_cumul_size;
176 last_cumul_size = cumul_size;
177 dimm->grain = 1 << 12; /* I82860_EAP has 4KiB reolution */
178 dimm->mtype = MEM_RMBS;
179 dimm->dtype = DEV_UNKNOWN;
180 dimm->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE;
181 }
182 }
183
i82860_probe1(struct pci_dev * pdev,int dev_idx)184 static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
185 {
186 struct mem_ctl_info *mci;
187 struct edac_mc_layer layers[2];
188 struct i82860_error_info discard;
189
190 /*
191 * RDRAM has channels but these don't map onto the csrow abstraction.
192 * According with the datasheet, there are 2 Rambus channels, supporting
193 * up to 16 direct RDRAM devices.
194 * The device groups from the GRA registers seem to map reasonably
195 * well onto the notion of a chip select row.
196 * There are 16 GRA registers and since the name is associated with
197 * the channel and the GRA registers map to physical devices so we are
198 * going to make 1 channel for group.
199 */
200 layers[0].type = EDAC_MC_LAYER_CHANNEL;
201 layers[0].size = 2;
202 layers[0].is_virt_csrow = true;
203 layers[1].type = EDAC_MC_LAYER_SLOT;
204 layers[1].size = 8;
205 layers[1].is_virt_csrow = true;
206 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
207 if (!mci)
208 return -ENOMEM;
209
210 edac_dbg(3, "init mci\n");
211 mci->pdev = &pdev->dev;
212 mci->mtype_cap = MEM_FLAG_DDR;
213 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
214 /* I"m not sure about this but I think that all RDRAM is SECDED */
215 mci->edac_cap = EDAC_FLAG_SECDED;
216 mci->mod_name = EDAC_MOD_STR;
217 mci->ctl_name = i82860_devs[dev_idx].ctl_name;
218 mci->dev_name = pci_name(pdev);
219 mci->edac_check = i82860_check;
220 mci->ctl_page_to_phys = NULL;
221 i82860_init_csrows(mci, pdev);
222 i82860_get_error_info(mci, &discard); /* clear counters */
223
224 /* Here we assume that we will never see multiple instances of this
225 * type of memory controller. The ID is therefore hardcoded to 0.
226 */
227 if (edac_mc_add_mc(mci)) {
228 edac_dbg(3, "failed edac_mc_add_mc()\n");
229 goto fail;
230 }
231
232 /* allocating generic PCI control info */
233 i82860_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
234 if (!i82860_pci) {
235 printk(KERN_WARNING
236 "%s(): Unable to create PCI control\n",
237 __func__);
238 printk(KERN_WARNING
239 "%s(): PCI error report via EDAC not setup\n",
240 __func__);
241 }
242
243 /* get this far and it's successful */
244 edac_dbg(3, "success\n");
245
246 return 0;
247
248 fail:
249 edac_mc_free(mci);
250 return -ENODEV;
251 }
252
253 /* returns count (>= 0), or negative on error */
i82860_init_one(struct pci_dev * pdev,const struct pci_device_id * ent)254 static int i82860_init_one(struct pci_dev *pdev,
255 const struct pci_device_id *ent)
256 {
257 int rc;
258
259 edac_dbg(0, "\n");
260 i82860_printk(KERN_INFO, "i82860 init one\n");
261
262 if (pci_enable_device(pdev) < 0)
263 return -EIO;
264
265 rc = i82860_probe1(pdev, ent->driver_data);
266
267 if (rc == 0)
268 mci_pdev = pci_dev_get(pdev);
269
270 return rc;
271 }
272
i82860_remove_one(struct pci_dev * pdev)273 static void i82860_remove_one(struct pci_dev *pdev)
274 {
275 struct mem_ctl_info *mci;
276
277 edac_dbg(0, "\n");
278
279 if (i82860_pci)
280 edac_pci_release_generic_ctl(i82860_pci);
281
282 if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
283 return;
284
285 edac_mc_free(mci);
286 }
287
288 static const struct pci_device_id i82860_pci_tbl[] = {
289 {
290 PCI_VEND_DEV(INTEL, 82860_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
291 I82860},
292 {
293 0,
294 } /* 0 terminated list. */
295 };
296
297 MODULE_DEVICE_TABLE(pci, i82860_pci_tbl);
298
299 static struct pci_driver i82860_driver = {
300 .name = EDAC_MOD_STR,
301 .probe = i82860_init_one,
302 .remove = i82860_remove_one,
303 .id_table = i82860_pci_tbl,
304 };
305
i82860_init(void)306 static int __init i82860_init(void)
307 {
308 int pci_rc;
309
310 edac_dbg(3, "\n");
311
312 /* Ensure that the OPSTATE is set correctly for POLL or NMI */
313 opstate_init();
314
315 if ((pci_rc = pci_register_driver(&i82860_driver)) < 0)
316 goto fail0;
317
318 if (!mci_pdev) {
319 mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
320 PCI_DEVICE_ID_INTEL_82860_0, NULL);
321
322 if (mci_pdev == NULL) {
323 edac_dbg(0, "860 pci_get_device fail\n");
324 pci_rc = -ENODEV;
325 goto fail1;
326 }
327
328 pci_rc = i82860_init_one(mci_pdev, i82860_pci_tbl);
329
330 if (pci_rc < 0) {
331 edac_dbg(0, "860 init fail\n");
332 pci_rc = -ENODEV;
333 goto fail1;
334 }
335 }
336
337 return 0;
338
339 fail1:
340 pci_unregister_driver(&i82860_driver);
341
342 fail0:
343 pci_dev_put(mci_pdev);
344 return pci_rc;
345 }
346
i82860_exit(void)347 static void __exit i82860_exit(void)
348 {
349 edac_dbg(3, "\n");
350 pci_unregister_driver(&i82860_driver);
351 pci_dev_put(mci_pdev);
352 }
353
354 module_init(i82860_init);
355 module_exit(i82860_exit);
356
357 MODULE_LICENSE("GPL");
358 MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com) Ben Woodard <woodard@redhat.com>");
359 MODULE_DESCRIPTION("ECC support for Intel 82860 memory hub controllers");
360
361 module_param(edac_op_state, int, 0444);
362 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
363