1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2011 Dmitry Eremin-Solenikov
4 * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
5 * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
6 *
7 * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
8 * that is iMac G5 and latest single CPU desktop.
9 */
10
11 #undef DEBUG
12
13 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
14
15 #include <linux/module.h>
16 #include <linux/types.h>
17 #include <linux/errno.h>
18 #include <linux/kernel.h>
19 #include <linux/delay.h>
20 #include <linux/sched.h>
21 #include <linux/cpufreq.h>
22 #include <linux/init.h>
23 #include <linux/completion.h>
24 #include <linux/mutex.h>
25 #include <linux/time.h>
26 #include <linux/of.h>
27
28 #define DBG(fmt...) pr_debug(fmt)
29
30 /* see 970FX user manual */
31
32 #define SCOM_PCR 0x0aa001 /* PCR scom addr */
33
34 #define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */
35 #define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */
36 #define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */
37 #define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */
38 #define PCR_SPEED_MASK 0x000e0000U /* speed mask */
39 #define PCR_SPEED_SHIFT 17
40 #define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */
41 #define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */
42 #define PCR_TARGET_TIME_MASK 0x00006000U /* target time */
43 #define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */
44 #define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */
45 #define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */
46
47 #define SCOM_PSR 0x408001 /* PSR scom addr */
48 /* warning: PSR is a 64 bits register */
49 #define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */
50 #define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */
51 #define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */
52 #define PSR_CUR_SPEED_SHIFT (56)
53
54 /*
55 * The G5 only supports two frequencies (Quarter speed is not supported)
56 */
57 #define CPUFREQ_HIGH 0
58 #define CPUFREQ_LOW 1
59
60 static struct cpufreq_frequency_table maple_cpu_freqs[] = {
61 {0, CPUFREQ_HIGH, 0},
62 {0, CPUFREQ_LOW, 0},
63 {0, 0, CPUFREQ_TABLE_END},
64 };
65
66 /* Power mode data is an array of the 32 bits PCR values to use for
67 * the various frequencies, retrieved from the device-tree
68 */
69 static int maple_pmode_cur;
70
71 static const u32 *maple_pmode_data;
72 static int maple_pmode_max;
73
74 /*
75 * SCOM based frequency switching for 970FX rev3
76 */
maple_scom_switch_freq(int speed_mode)77 static int maple_scom_switch_freq(int speed_mode)
78 {
79 unsigned long flags;
80 int to;
81
82 local_irq_save(flags);
83
84 /* Clear PCR high */
85 scom970_write(SCOM_PCR, 0);
86 /* Clear PCR low */
87 scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
88 /* Set PCR low */
89 scom970_write(SCOM_PCR, PCR_HILO_SELECT |
90 maple_pmode_data[speed_mode]);
91
92 /* Wait for completion */
93 for (to = 0; to < 10; to++) {
94 unsigned long psr = scom970_read(SCOM_PSR);
95
96 if ((psr & PSR_CMD_RECEIVED) == 0 &&
97 (((psr >> PSR_CUR_SPEED_SHIFT) ^
98 (maple_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
99 == 0)
100 break;
101 if (psr & PSR_CMD_COMPLETED)
102 break;
103 udelay(100);
104 }
105
106 local_irq_restore(flags);
107
108 maple_pmode_cur = speed_mode;
109 ppc_proc_freq = maple_cpu_freqs[speed_mode].frequency * 1000ul;
110
111 return 0;
112 }
113
maple_scom_query_freq(void)114 static int maple_scom_query_freq(void)
115 {
116 unsigned long psr = scom970_read(SCOM_PSR);
117 int i;
118
119 for (i = 0; i <= maple_pmode_max; i++)
120 if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
121 (maple_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
122 break;
123 return i;
124 }
125
126 /*
127 * Common interface to the cpufreq core
128 */
129
maple_cpufreq_target(struct cpufreq_policy * policy,unsigned int index)130 static int maple_cpufreq_target(struct cpufreq_policy *policy,
131 unsigned int index)
132 {
133 return maple_scom_switch_freq(index);
134 }
135
maple_cpufreq_get_speed(unsigned int cpu)136 static unsigned int maple_cpufreq_get_speed(unsigned int cpu)
137 {
138 return maple_cpu_freqs[maple_pmode_cur].frequency;
139 }
140
maple_cpufreq_cpu_init(struct cpufreq_policy * policy)141 static int maple_cpufreq_cpu_init(struct cpufreq_policy *policy)
142 {
143 cpufreq_generic_init(policy, maple_cpu_freqs, 12000);
144 return 0;
145 }
146
147 static struct cpufreq_driver maple_cpufreq_driver = {
148 .name = "maple",
149 .flags = CPUFREQ_CONST_LOOPS,
150 .init = maple_cpufreq_cpu_init,
151 .verify = cpufreq_generic_frequency_table_verify,
152 .target_index = maple_cpufreq_target,
153 .get = maple_cpufreq_get_speed,
154 .attr = cpufreq_generic_attr,
155 };
156
maple_cpufreq_init(void)157 static int __init maple_cpufreq_init(void)
158 {
159 struct device_node *cpunode;
160 unsigned int psize;
161 unsigned long max_freq;
162 const u32 *valp;
163 u32 pvr_hi;
164 int rc = -ENODEV;
165
166 /*
167 * Behave here like powermac driver which checks machine compatibility
168 * to ease merging of two drivers in future.
169 */
170 if (!of_machine_is_compatible("Momentum,Maple") &&
171 !of_machine_is_compatible("Momentum,Apache"))
172 return 0;
173
174 /* Get first CPU node */
175 cpunode = of_cpu_device_node_get(0);
176 if (cpunode == NULL) {
177 pr_err("Can't find any CPU 0 node\n");
178 goto bail_noprops;
179 }
180
181 /* Check 970FX for now */
182 /* we actually don't care on which CPU to access PVR */
183 pvr_hi = PVR_VER(mfspr(SPRN_PVR));
184 if (pvr_hi != 0x3c && pvr_hi != 0x44) {
185 pr_err("Unsupported CPU version (%x)\n", pvr_hi);
186 goto bail_noprops;
187 }
188
189 /* Look for the powertune data in the device-tree */
190 /*
191 * On Maple this property is provided by PIBS in dual-processor config,
192 * not provided by PIBS in CPU0 config and also not provided by SLOF,
193 * so YMMV
194 */
195 maple_pmode_data = of_get_property(cpunode, "power-mode-data", &psize);
196 if (!maple_pmode_data) {
197 DBG("No power-mode-data !\n");
198 goto bail_noprops;
199 }
200 maple_pmode_max = psize / sizeof(u32) - 1;
201
202 /*
203 * From what I see, clock-frequency is always the maximal frequency.
204 * The current driver can not slew sysclk yet, so we really only deal
205 * with powertune steps for now. We also only implement full freq and
206 * half freq in this version. So far, I haven't yet seen a machine
207 * supporting anything else.
208 */
209 valp = of_get_property(cpunode, "clock-frequency", NULL);
210 if (!valp)
211 goto bail_noprops;
212 max_freq = (*valp)/1000;
213 maple_cpu_freqs[0].frequency = max_freq;
214 maple_cpu_freqs[1].frequency = max_freq/2;
215
216 /* Force apply current frequency to make sure everything is in
217 * sync (voltage is right for example). Firmware may leave us with
218 * a strange setting ...
219 */
220 msleep(10);
221 maple_pmode_cur = -1;
222 maple_scom_switch_freq(maple_scom_query_freq());
223
224 pr_info("Registering Maple CPU frequency driver\n");
225 pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
226 maple_cpu_freqs[1].frequency/1000,
227 maple_cpu_freqs[0].frequency/1000,
228 maple_cpu_freqs[maple_pmode_cur].frequency/1000);
229
230 rc = cpufreq_register_driver(&maple_cpufreq_driver);
231
232 bail_noprops:
233 of_node_put(cpunode);
234
235 return rc;
236 }
237
238 module_init(maple_cpufreq_init);
239
240
241 MODULE_LICENSE("GPL");
242