1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Analog Devices LTC2947 high precision power and energy monitor
4 *
5 * Copyright 2019 Analog Devices Inc.
6 */
7 #include <linux/bitfield.h>
8 #include <linux/bits.h>
9 #include <linux/clk.h>
10 #include <linux/device.h>
11 #include <linux/hwmon.h>
12 #include <linux/hwmon-sysfs.h>
13 #include <linux/module.h>
14 #include <linux/of.h>
15 #include <linux/regmap.h>
16
17 #include "ltc2947.h"
18
19 /* register's */
20 #define LTC2947_REG_PAGE_CTRL 0xFF
21 #define LTC2947_REG_CTRL 0xF0
22 #define LTC2947_REG_TBCTL 0xE9
23 #define LTC2947_CONT_MODE_MASK BIT(3)
24 #define LTC2947_CONT_MODE(x) FIELD_PREP(LTC2947_CONT_MODE_MASK, x)
25 #define LTC2947_PRE_MASK GENMASK(2, 0)
26 #define LTC2947_PRE(x) FIELD_PREP(LTC2947_PRE_MASK, x)
27 #define LTC2947_DIV_MASK GENMASK(7, 3)
28 #define LTC2947_DIV(x) FIELD_PREP(LTC2947_DIV_MASK, x)
29 #define LTC2947_SHUTDOWN_MASK BIT(0)
30 #define LTC2947_REG_ACCUM_POL 0xE1
31 #define LTC2947_ACCUM_POL_1_MASK GENMASK(1, 0)
32 #define LTC2947_ACCUM_POL_1(x) FIELD_PREP(LTC2947_ACCUM_POL_1_MASK, x)
33 #define LTC2947_ACCUM_POL_2_MASK GENMASK(3, 2)
34 #define LTC2947_ACCUM_POL_2(x) FIELD_PREP(LTC2947_ACCUM_POL_2_MASK, x)
35 #define LTC2947_REG_ACCUM_DEADBAND 0xE4
36 #define LTC2947_REG_GPIOSTATCTL 0x67
37 #define LTC2947_GPIO_EN_MASK BIT(0)
38 #define LTC2947_GPIO_EN(x) FIELD_PREP(LTC2947_GPIO_EN_MASK, x)
39 #define LTC2947_GPIO_FAN_EN_MASK BIT(6)
40 #define LTC2947_GPIO_FAN_EN(x) FIELD_PREP(LTC2947_GPIO_FAN_EN_MASK, x)
41 #define LTC2947_GPIO_FAN_POL_MASK BIT(7)
42 #define LTC2947_GPIO_FAN_POL(x) FIELD_PREP(LTC2947_GPIO_FAN_POL_MASK, x)
43 #define LTC2947_REG_GPIO_ACCUM 0xE3
44 /* 200Khz */
45 #define LTC2947_CLK_MIN 200000
46 /* 25Mhz */
47 #define LTC2947_CLK_MAX 25000000
48 #define LTC2947_PAGE0 0
49 #define LTC2947_PAGE1 1
50 /* Voltage registers */
51 #define LTC2947_REG_VOLTAGE 0xA0
52 #define LTC2947_REG_VOLTAGE_MAX 0x50
53 #define LTC2947_REG_VOLTAGE_MIN 0x52
54 #define LTC2947_REG_VOLTAGE_THRE_H 0x90
55 #define LTC2947_REG_VOLTAGE_THRE_L 0x92
56 #define LTC2947_REG_DVCC 0xA4
57 #define LTC2947_REG_DVCC_MAX 0x58
58 #define LTC2947_REG_DVCC_MIN 0x5A
59 #define LTC2947_REG_DVCC_THRE_H 0x98
60 #define LTC2947_REG_DVCC_THRE_L 0x9A
61 #define LTC2947_VOLTAGE_GEN_CHAN 0
62 #define LTC2947_VOLTAGE_DVCC_CHAN 1
63 /* in mV */
64 #define VOLTAGE_MAX 15500
65 #define VOLTAGE_MIN -300
66 #define VDVCC_MAX 15000
67 #define VDVCC_MIN 4750
68 /* Current registers */
69 #define LTC2947_REG_CURRENT 0x90
70 #define LTC2947_REG_CURRENT_MAX 0x40
71 #define LTC2947_REG_CURRENT_MIN 0x42
72 #define LTC2947_REG_CURRENT_THRE_H 0x80
73 #define LTC2947_REG_CURRENT_THRE_L 0x82
74 /* in mA */
75 #define CURRENT_MAX 30000
76 #define CURRENT_MIN -30000
77 /* Power registers */
78 #define LTC2947_REG_POWER 0x93
79 #define LTC2947_REG_POWER_MAX 0x44
80 #define LTC2947_REG_POWER_MIN 0x46
81 #define LTC2947_REG_POWER_THRE_H 0x84
82 #define LTC2947_REG_POWER_THRE_L 0x86
83 /* in uW */
84 #define POWER_MAX 450000000
85 #define POWER_MIN -450000000
86 /* Temperature registers */
87 #define LTC2947_REG_TEMP 0xA2
88 #define LTC2947_REG_TEMP_MAX 0x54
89 #define LTC2947_REG_TEMP_MIN 0x56
90 #define LTC2947_REG_TEMP_THRE_H 0x94
91 #define LTC2947_REG_TEMP_THRE_L 0x96
92 #define LTC2947_REG_TEMP_FAN_THRE_H 0x9C
93 #define LTC2947_REG_TEMP_FAN_THRE_L 0x9E
94 #define LTC2947_TEMP_FAN_CHAN 1
95 /* in millidegress Celsius */
96 #define TEMP_MAX 85000
97 #define TEMP_MIN -40000
98 /* Energy registers */
99 #define LTC2947_REG_ENERGY1 0x06
100 #define LTC2947_REG_ENERGY2 0x16
101 /* Status/Alarm/Overflow registers */
102 #define LTC2947_REG_STATUS 0x80
103 #define LTC2947_REG_STATVT 0x81
104 #define LTC2947_REG_STATIP 0x82
105 #define LTC2947_REG_STATVDVCC 0x87
106
107 #define LTC2947_ALERTS_SIZE (LTC2947_REG_STATVDVCC - LTC2947_REG_STATUS)
108 #define LTC2947_MAX_VOLTAGE_MASK BIT(0)
109 #define LTC2947_MIN_VOLTAGE_MASK BIT(1)
110 #define LTC2947_MAX_CURRENT_MASK BIT(0)
111 #define LTC2947_MIN_CURRENT_MASK BIT(1)
112 #define LTC2947_MAX_POWER_MASK BIT(2)
113 #define LTC2947_MIN_POWER_MASK BIT(3)
114 #define LTC2947_MAX_TEMP_MASK BIT(2)
115 #define LTC2947_MIN_TEMP_MASK BIT(3)
116 #define LTC2947_MAX_TEMP_FAN_MASK BIT(4)
117 #define LTC2947_MIN_TEMP_FAN_MASK BIT(5)
118
119 struct ltc2947_data {
120 struct regmap *map;
121 struct device *dev;
122 /*
123 * The mutex is needed because the device has 2 memory pages. When
124 * reading/writing the correct page needs to be set so that, the
125 * complete sequence select_page->read/write needs to be protected.
126 */
127 struct mutex lock;
128 u32 lsb_energy;
129 bool gpio_out;
130 };
131
__ltc2947_val_read16(const struct ltc2947_data * st,const u8 reg,u64 * val)132 static int __ltc2947_val_read16(const struct ltc2947_data *st, const u8 reg,
133 u64 *val)
134 {
135 __be16 __val = 0;
136 int ret;
137
138 ret = regmap_bulk_read(st->map, reg, &__val, 2);
139 if (ret)
140 return ret;
141
142 *val = be16_to_cpu(__val);
143
144 return 0;
145 }
146
__ltc2947_val_read24(const struct ltc2947_data * st,const u8 reg,u64 * val)147 static int __ltc2947_val_read24(const struct ltc2947_data *st, const u8 reg,
148 u64 *val)
149 {
150 __be32 __val = 0;
151 int ret;
152
153 ret = regmap_bulk_read(st->map, reg, &__val, 3);
154 if (ret)
155 return ret;
156
157 *val = be32_to_cpu(__val) >> 8;
158
159 return 0;
160 }
161
__ltc2947_val_read64(const struct ltc2947_data * st,const u8 reg,u64 * val)162 static int __ltc2947_val_read64(const struct ltc2947_data *st, const u8 reg,
163 u64 *val)
164 {
165 __be64 __val = 0;
166 int ret;
167
168 ret = regmap_bulk_read(st->map, reg, &__val, 6);
169 if (ret)
170 return ret;
171
172 *val = be64_to_cpu(__val) >> 16;
173
174 return 0;
175 }
176
ltc2947_val_read(struct ltc2947_data * st,const u8 reg,const u8 page,const size_t size,s64 * val)177 static int ltc2947_val_read(struct ltc2947_data *st, const u8 reg,
178 const u8 page, const size_t size, s64 *val)
179 {
180 int ret;
181 u64 __val = 0;
182
183 mutex_lock(&st->lock);
184
185 ret = regmap_write(st->map, LTC2947_REG_PAGE_CTRL, page);
186 if (ret) {
187 mutex_unlock(&st->lock);
188 return ret;
189 }
190
191 dev_dbg(st->dev, "Read val, reg:%02X, p:%d sz:%zu\n", reg, page,
192 size);
193
194 switch (size) {
195 case 2:
196 ret = __ltc2947_val_read16(st, reg, &__val);
197 break;
198 case 3:
199 ret = __ltc2947_val_read24(st, reg, &__val);
200 break;
201 case 6:
202 ret = __ltc2947_val_read64(st, reg, &__val);
203 break;
204 default:
205 ret = -EINVAL;
206 break;
207 }
208
209 mutex_unlock(&st->lock);
210
211 if (ret)
212 return ret;
213
214 *val = sign_extend64(__val, (8 * size) - 1);
215
216 dev_dbg(st->dev, "Got s:%lld, u:%016llX\n", *val, __val);
217
218 return 0;
219 }
220
__ltc2947_val_write64(const struct ltc2947_data * st,const u8 reg,const u64 val)221 static int __ltc2947_val_write64(const struct ltc2947_data *st, const u8 reg,
222 const u64 val)
223 {
224 __be64 __val;
225
226 __val = cpu_to_be64(val << 16);
227 return regmap_bulk_write(st->map, reg, &__val, 6);
228 }
229
__ltc2947_val_write16(const struct ltc2947_data * st,const u8 reg,const u16 val)230 static int __ltc2947_val_write16(const struct ltc2947_data *st, const u8 reg,
231 const u16 val)
232 {
233 __be16 __val;
234
235 __val = cpu_to_be16(val);
236 return regmap_bulk_write(st->map, reg, &__val, 2);
237 }
238
ltc2947_val_write(struct ltc2947_data * st,const u8 reg,const u8 page,const size_t size,const u64 val)239 static int ltc2947_val_write(struct ltc2947_data *st, const u8 reg,
240 const u8 page, const size_t size, const u64 val)
241 {
242 int ret;
243
244 mutex_lock(&st->lock);
245 /* set device on correct page */
246 ret = regmap_write(st->map, LTC2947_REG_PAGE_CTRL, page);
247 if (ret) {
248 mutex_unlock(&st->lock);
249 return ret;
250 }
251
252 dev_dbg(st->dev, "Write val, r:%02X, p:%d, sz:%zu, val:%016llX\n",
253 reg, page, size, val);
254
255 switch (size) {
256 case 2:
257 ret = __ltc2947_val_write16(st, reg, val);
258 break;
259 case 6:
260 ret = __ltc2947_val_write64(st, reg, val);
261 break;
262 default:
263 ret = -EINVAL;
264 break;
265 }
266
267 mutex_unlock(&st->lock);
268
269 return ret;
270 }
271
ltc2947_reset_history(struct ltc2947_data * st,const u8 reg_h,const u8 reg_l)272 static int ltc2947_reset_history(struct ltc2947_data *st, const u8 reg_h,
273 const u8 reg_l)
274 {
275 int ret;
276 /*
277 * let's reset the tracking register's. Tracking register's have all
278 * 2 bytes size
279 */
280 ret = ltc2947_val_write(st, reg_h, LTC2947_PAGE0, 2, 0x8000U);
281 if (ret)
282 return ret;
283
284 return ltc2947_val_write(st, reg_l, LTC2947_PAGE0, 2, 0x7FFFU);
285 }
286
ltc2947_alarm_read(struct ltc2947_data * st,const u8 reg,const u32 mask,long * val)287 static int ltc2947_alarm_read(struct ltc2947_data *st, const u8 reg,
288 const u32 mask, long *val)
289 {
290 u8 offset = reg - LTC2947_REG_STATUS;
291 /* +1 to include status reg */
292 char alarms[LTC2947_ALERTS_SIZE + 1];
293 int ret = 0;
294
295 memset(alarms, 0, sizeof(alarms));
296
297 mutex_lock(&st->lock);
298
299 ret = regmap_write(st->map, LTC2947_REG_PAGE_CTRL, LTC2947_PAGE0);
300 if (ret)
301 goto unlock;
302
303 dev_dbg(st->dev, "Read alarm, reg:%02X, mask:%02X\n", reg, mask);
304 /*
305 * As stated in the datasheet, when Threshold and Overflow registers
306 * are used, the status and all alert registers must be read in one
307 * multi-byte transaction.
308 */
309 ret = regmap_bulk_read(st->map, LTC2947_REG_STATUS, alarms,
310 sizeof(alarms));
311 if (ret)
312 goto unlock;
313
314 /* get the alarm */
315 *val = !!(alarms[offset] & mask);
316 unlock:
317 mutex_unlock(&st->lock);
318 return ret;
319 }
320
ltc2947_show_value(struct device * dev,struct device_attribute * da,char * buf)321 static ssize_t ltc2947_show_value(struct device *dev,
322 struct device_attribute *da, char *buf)
323 {
324 struct ltc2947_data *st = dev_get_drvdata(dev);
325 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
326 int ret;
327 s64 val = 0;
328
329 ret = ltc2947_val_read(st, attr->index, LTC2947_PAGE0, 6, &val);
330 if (ret)
331 return ret;
332
333 /* value in microJoule. st->lsb_energy was multiplied by 10E9 */
334 val = div_s64(val * st->lsb_energy, 1000);
335
336 return sprintf(buf, "%lld\n", val);
337 }
338
ltc2947_read_temp(struct device * dev,const u32 attr,long * val,const int channel)339 static int ltc2947_read_temp(struct device *dev, const u32 attr, long *val,
340 const int channel)
341 {
342 int ret;
343 struct ltc2947_data *st = dev_get_drvdata(dev);
344 s64 __val = 0;
345
346 switch (attr) {
347 case hwmon_temp_input:
348 ret = ltc2947_val_read(st, LTC2947_REG_TEMP, LTC2947_PAGE0,
349 2, &__val);
350 break;
351 case hwmon_temp_highest:
352 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_MAX, LTC2947_PAGE0,
353 2, &__val);
354 break;
355 case hwmon_temp_lowest:
356 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_MIN, LTC2947_PAGE0,
357 2, &__val);
358 break;
359 case hwmon_temp_max_alarm:
360 if (channel == LTC2947_TEMP_FAN_CHAN)
361 return ltc2947_alarm_read(st, LTC2947_REG_STATVT,
362 LTC2947_MAX_TEMP_FAN_MASK,
363 val);
364
365 return ltc2947_alarm_read(st, LTC2947_REG_STATVT,
366 LTC2947_MAX_TEMP_MASK, val);
367 case hwmon_temp_min_alarm:
368 if (channel == LTC2947_TEMP_FAN_CHAN)
369 return ltc2947_alarm_read(st, LTC2947_REG_STATVT,
370 LTC2947_MIN_TEMP_FAN_MASK,
371 val);
372
373 return ltc2947_alarm_read(st, LTC2947_REG_STATVT,
374 LTC2947_MIN_TEMP_MASK, val);
375 case hwmon_temp_max:
376 if (channel == LTC2947_TEMP_FAN_CHAN)
377 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_FAN_THRE_H,
378 LTC2947_PAGE1, 2, &__val);
379 else
380 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_THRE_H,
381 LTC2947_PAGE1, 2, &__val);
382 break;
383 case hwmon_temp_min:
384 if (channel == LTC2947_TEMP_FAN_CHAN)
385 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_FAN_THRE_L,
386 LTC2947_PAGE1, 2, &__val);
387 else
388 ret = ltc2947_val_read(st, LTC2947_REG_TEMP_THRE_L,
389 LTC2947_PAGE1, 2, &__val);
390 break;
391 default:
392 return -ENOTSUPP;
393 }
394
395 if (ret)
396 return ret;
397
398 /* in milidegrees celcius, temp is given by: */
399 *val = (__val * 204) + 5500;
400
401 return 0;
402 }
403
ltc2947_read_power(struct device * dev,const u32 attr,long * val)404 static int ltc2947_read_power(struct device *dev, const u32 attr, long *val)
405 {
406 struct ltc2947_data *st = dev_get_drvdata(dev);
407 int ret;
408 u32 lsb = 200000; /* in uW */
409 s64 __val = 0;
410
411 switch (attr) {
412 case hwmon_power_input:
413 ret = ltc2947_val_read(st, LTC2947_REG_POWER, LTC2947_PAGE0,
414 3, &__val);
415 lsb = 50000;
416 break;
417 case hwmon_power_input_highest:
418 ret = ltc2947_val_read(st, LTC2947_REG_POWER_MAX, LTC2947_PAGE0,
419 2, &__val);
420 break;
421 case hwmon_power_input_lowest:
422 ret = ltc2947_val_read(st, LTC2947_REG_POWER_MIN, LTC2947_PAGE0,
423 2, &__val);
424 break;
425 case hwmon_power_max_alarm:
426 return ltc2947_alarm_read(st, LTC2947_REG_STATIP,
427 LTC2947_MAX_POWER_MASK, val);
428 case hwmon_power_min_alarm:
429 return ltc2947_alarm_read(st, LTC2947_REG_STATIP,
430 LTC2947_MIN_POWER_MASK, val);
431 case hwmon_power_max:
432 ret = ltc2947_val_read(st, LTC2947_REG_POWER_THRE_H,
433 LTC2947_PAGE1, 2, &__val);
434 break;
435 case hwmon_power_min:
436 ret = ltc2947_val_read(st, LTC2947_REG_POWER_THRE_L,
437 LTC2947_PAGE1, 2, &__val);
438 break;
439 default:
440 return -ENOTSUPP;
441 }
442
443 if (ret)
444 return ret;
445
446 *val = __val * lsb;
447
448 return 0;
449 }
450
ltc2947_read_curr(struct device * dev,const u32 attr,long * val)451 static int ltc2947_read_curr(struct device *dev, const u32 attr, long *val)
452 {
453 struct ltc2947_data *st = dev_get_drvdata(dev);
454 int ret;
455 u8 lsb = 12; /* in mA */
456 s64 __val = 0;
457
458 switch (attr) {
459 case hwmon_curr_input:
460 ret = ltc2947_val_read(st, LTC2947_REG_CURRENT,
461 LTC2947_PAGE0, 3, &__val);
462 lsb = 3;
463 break;
464 case hwmon_curr_highest:
465 ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_MAX,
466 LTC2947_PAGE0, 2, &__val);
467 break;
468 case hwmon_curr_lowest:
469 ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_MIN,
470 LTC2947_PAGE0, 2, &__val);
471 break;
472 case hwmon_curr_max_alarm:
473 return ltc2947_alarm_read(st, LTC2947_REG_STATIP,
474 LTC2947_MAX_CURRENT_MASK, val);
475 case hwmon_curr_min_alarm:
476 return ltc2947_alarm_read(st, LTC2947_REG_STATIP,
477 LTC2947_MIN_CURRENT_MASK, val);
478 case hwmon_curr_max:
479 ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_THRE_H,
480 LTC2947_PAGE1, 2, &__val);
481 break;
482 case hwmon_curr_min:
483 ret = ltc2947_val_read(st, LTC2947_REG_CURRENT_THRE_L,
484 LTC2947_PAGE1, 2, &__val);
485 break;
486 default:
487 return -ENOTSUPP;
488 }
489
490 if (ret)
491 return ret;
492
493 *val = __val * lsb;
494
495 return 0;
496 }
497
ltc2947_read_in(struct device * dev,const u32 attr,long * val,const int channel)498 static int ltc2947_read_in(struct device *dev, const u32 attr, long *val,
499 const int channel)
500 {
501 struct ltc2947_data *st = dev_get_drvdata(dev);
502 int ret;
503 u8 lsb = 2; /* in mV */
504 s64 __val = 0;
505
506 if (channel < 0 || channel > LTC2947_VOLTAGE_DVCC_CHAN) {
507 dev_err(st->dev, "Invalid chan%d for voltage", channel);
508 return -EINVAL;
509 }
510
511 switch (attr) {
512 case hwmon_in_input:
513 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
514 ret = ltc2947_val_read(st, LTC2947_REG_DVCC,
515 LTC2947_PAGE0, 2, &__val);
516 lsb = 145;
517 } else {
518 ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE,
519 LTC2947_PAGE0, 2, &__val);
520 }
521 break;
522 case hwmon_in_highest:
523 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
524 ret = ltc2947_val_read(st, LTC2947_REG_DVCC_MAX,
525 LTC2947_PAGE0, 2, &__val);
526 lsb = 145;
527 } else {
528 ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_MAX,
529 LTC2947_PAGE0, 2, &__val);
530 }
531 break;
532 case hwmon_in_lowest:
533 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
534 ret = ltc2947_val_read(st, LTC2947_REG_DVCC_MIN,
535 LTC2947_PAGE0, 2, &__val);
536 lsb = 145;
537 } else {
538 ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_MIN,
539 LTC2947_PAGE0, 2, &__val);
540 }
541 break;
542 case hwmon_in_max_alarm:
543 if (channel == LTC2947_VOLTAGE_DVCC_CHAN)
544 return ltc2947_alarm_read(st, LTC2947_REG_STATVDVCC,
545 LTC2947_MAX_VOLTAGE_MASK,
546 val);
547
548 return ltc2947_alarm_read(st, LTC2947_REG_STATVT,
549 LTC2947_MAX_VOLTAGE_MASK, val);
550 case hwmon_in_min_alarm:
551 if (channel == LTC2947_VOLTAGE_DVCC_CHAN)
552 return ltc2947_alarm_read(st, LTC2947_REG_STATVDVCC,
553 LTC2947_MIN_VOLTAGE_MASK,
554 val);
555
556 return ltc2947_alarm_read(st, LTC2947_REG_STATVT,
557 LTC2947_MIN_VOLTAGE_MASK, val);
558 case hwmon_in_max:
559 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
560 ret = ltc2947_val_read(st, LTC2947_REG_DVCC_THRE_H,
561 LTC2947_PAGE1, 2, &__val);
562 lsb = 145;
563 } else {
564 ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_THRE_H,
565 LTC2947_PAGE1, 2, &__val);
566 }
567 break;
568 case hwmon_in_min:
569 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
570 ret = ltc2947_val_read(st, LTC2947_REG_DVCC_THRE_L,
571 LTC2947_PAGE1, 2, &__val);
572 lsb = 145;
573 } else {
574 ret = ltc2947_val_read(st, LTC2947_REG_VOLTAGE_THRE_L,
575 LTC2947_PAGE1, 2, &__val);
576 }
577 break;
578 default:
579 return -ENOTSUPP;
580 }
581
582 if (ret)
583 return ret;
584
585 *val = __val * lsb;
586
587 return 0;
588 }
589
ltc2947_read(struct device * dev,enum hwmon_sensor_types type,u32 attr,int channel,long * val)590 static int ltc2947_read(struct device *dev, enum hwmon_sensor_types type,
591 u32 attr, int channel, long *val)
592 {
593 switch (type) {
594 case hwmon_in:
595 return ltc2947_read_in(dev, attr, val, channel);
596 case hwmon_curr:
597 return ltc2947_read_curr(dev, attr, val);
598 case hwmon_power:
599 return ltc2947_read_power(dev, attr, val);
600 case hwmon_temp:
601 return ltc2947_read_temp(dev, attr, val, channel);
602 default:
603 return -ENOTSUPP;
604 }
605 }
606
ltc2947_write_temp(struct device * dev,const u32 attr,long val,const int channel)607 static int ltc2947_write_temp(struct device *dev, const u32 attr,
608 long val, const int channel)
609 {
610 struct ltc2947_data *st = dev_get_drvdata(dev);
611
612 if (channel < 0 || channel > LTC2947_TEMP_FAN_CHAN) {
613 dev_err(st->dev, "Invalid chan%d for temperature", channel);
614 return -EINVAL;
615 }
616
617 switch (attr) {
618 case hwmon_temp_reset_history:
619 if (val != 1)
620 return -EINVAL;
621 return ltc2947_reset_history(st, LTC2947_REG_TEMP_MAX,
622 LTC2947_REG_TEMP_MIN);
623 case hwmon_temp_max:
624 val = clamp_val(val, TEMP_MIN, TEMP_MAX);
625 if (channel == LTC2947_TEMP_FAN_CHAN) {
626 if (!st->gpio_out)
627 return -ENOTSUPP;
628
629 return ltc2947_val_write(st,
630 LTC2947_REG_TEMP_FAN_THRE_H,
631 LTC2947_PAGE1, 2,
632 DIV_ROUND_CLOSEST(val - 550, 204));
633 }
634
635 return ltc2947_val_write(st, LTC2947_REG_TEMP_THRE_H,
636 LTC2947_PAGE1, 2,
637 DIV_ROUND_CLOSEST(val - 550, 204));
638 case hwmon_temp_min:
639 val = clamp_val(val, TEMP_MIN, TEMP_MAX);
640 if (channel == LTC2947_TEMP_FAN_CHAN) {
641 if (!st->gpio_out)
642 return -ENOTSUPP;
643
644 return ltc2947_val_write(st,
645 LTC2947_REG_TEMP_FAN_THRE_L,
646 LTC2947_PAGE1, 2,
647 DIV_ROUND_CLOSEST(val - 550, 204));
648 }
649
650 return ltc2947_val_write(st, LTC2947_REG_TEMP_THRE_L,
651 LTC2947_PAGE1, 2,
652 DIV_ROUND_CLOSEST(val - 550, 204));
653 default:
654 return -ENOTSUPP;
655 }
656 }
657
ltc2947_write_power(struct device * dev,const u32 attr,long val)658 static int ltc2947_write_power(struct device *dev, const u32 attr,
659 long val)
660 {
661 struct ltc2947_data *st = dev_get_drvdata(dev);
662
663 switch (attr) {
664 case hwmon_power_reset_history:
665 if (val != 1)
666 return -EINVAL;
667 return ltc2947_reset_history(st, LTC2947_REG_POWER_MAX,
668 LTC2947_REG_POWER_MIN);
669 case hwmon_power_max:
670 val = clamp_val(val, POWER_MIN, POWER_MAX);
671 return ltc2947_val_write(st, LTC2947_REG_POWER_THRE_H,
672 LTC2947_PAGE1, 2,
673 DIV_ROUND_CLOSEST(val, 200000));
674 case hwmon_power_min:
675 val = clamp_val(val, POWER_MIN, POWER_MAX);
676 return ltc2947_val_write(st, LTC2947_REG_POWER_THRE_L,
677 LTC2947_PAGE1, 2,
678 DIV_ROUND_CLOSEST(val, 200000));
679 default:
680 return -ENOTSUPP;
681 }
682 }
683
ltc2947_write_curr(struct device * dev,const u32 attr,long val)684 static int ltc2947_write_curr(struct device *dev, const u32 attr,
685 long val)
686 {
687 struct ltc2947_data *st = dev_get_drvdata(dev);
688
689 switch (attr) {
690 case hwmon_curr_reset_history:
691 if (val != 1)
692 return -EINVAL;
693 return ltc2947_reset_history(st, LTC2947_REG_CURRENT_MAX,
694 LTC2947_REG_CURRENT_MIN);
695 case hwmon_curr_max:
696 val = clamp_val(val, CURRENT_MIN, CURRENT_MAX);
697 return ltc2947_val_write(st, LTC2947_REG_CURRENT_THRE_H,
698 LTC2947_PAGE1, 2,
699 DIV_ROUND_CLOSEST(val, 12));
700 case hwmon_curr_min:
701 val = clamp_val(val, CURRENT_MIN, CURRENT_MAX);
702 return ltc2947_val_write(st, LTC2947_REG_CURRENT_THRE_L,
703 LTC2947_PAGE1, 2,
704 DIV_ROUND_CLOSEST(val, 12));
705 default:
706 return -ENOTSUPP;
707 }
708 }
709
ltc2947_write_in(struct device * dev,const u32 attr,long val,const int channel)710 static int ltc2947_write_in(struct device *dev, const u32 attr, long val,
711 const int channel)
712 {
713 struct ltc2947_data *st = dev_get_drvdata(dev);
714
715 if (channel > LTC2947_VOLTAGE_DVCC_CHAN) {
716 dev_err(st->dev, "Invalid chan%d for voltage", channel);
717 return -EINVAL;
718 }
719
720 switch (attr) {
721 case hwmon_in_reset_history:
722 if (val != 1)
723 return -EINVAL;
724
725 if (channel == LTC2947_VOLTAGE_DVCC_CHAN)
726 return ltc2947_reset_history(st, LTC2947_REG_DVCC_MAX,
727 LTC2947_REG_DVCC_MIN);
728
729 return ltc2947_reset_history(st, LTC2947_REG_VOLTAGE_MAX,
730 LTC2947_REG_VOLTAGE_MIN);
731 case hwmon_in_max:
732 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
733 val = clamp_val(val, VDVCC_MIN, VDVCC_MAX);
734 return ltc2947_val_write(st, LTC2947_REG_DVCC_THRE_H,
735 LTC2947_PAGE1, 2,
736 DIV_ROUND_CLOSEST(val, 145));
737 }
738
739 val = clamp_val(val, VOLTAGE_MIN, VOLTAGE_MAX);
740 return ltc2947_val_write(st, LTC2947_REG_VOLTAGE_THRE_H,
741 LTC2947_PAGE1, 2,
742 DIV_ROUND_CLOSEST(val, 2));
743 case hwmon_in_min:
744 if (channel == LTC2947_VOLTAGE_DVCC_CHAN) {
745 val = clamp_val(val, VDVCC_MIN, VDVCC_MAX);
746 return ltc2947_val_write(st, LTC2947_REG_DVCC_THRE_L,
747 LTC2947_PAGE1, 2,
748 DIV_ROUND_CLOSEST(val, 145));
749 }
750
751 val = clamp_val(val, VOLTAGE_MIN, VOLTAGE_MAX);
752 return ltc2947_val_write(st, LTC2947_REG_VOLTAGE_THRE_L,
753 LTC2947_PAGE1, 2,
754 DIV_ROUND_CLOSEST(val, 2));
755 default:
756 return -ENOTSUPP;
757 }
758 }
759
ltc2947_write(struct device * dev,enum hwmon_sensor_types type,u32 attr,int channel,long val)760 static int ltc2947_write(struct device *dev,
761 enum hwmon_sensor_types type,
762 u32 attr, int channel, long val)
763 {
764 switch (type) {
765 case hwmon_in:
766 return ltc2947_write_in(dev, attr, val, channel);
767 case hwmon_curr:
768 return ltc2947_write_curr(dev, attr, val);
769 case hwmon_power:
770 return ltc2947_write_power(dev, attr, val);
771 case hwmon_temp:
772 return ltc2947_write_temp(dev, attr, val, channel);
773 default:
774 return -ENOTSUPP;
775 }
776 }
777
ltc2947_read_labels(struct device * dev,enum hwmon_sensor_types type,u32 attr,int channel,const char ** str)778 static int ltc2947_read_labels(struct device *dev,
779 enum hwmon_sensor_types type,
780 u32 attr, int channel, const char **str)
781 {
782 switch (type) {
783 case hwmon_in:
784 if (channel == LTC2947_VOLTAGE_DVCC_CHAN)
785 *str = "DVCC";
786 else
787 *str = "VP-VM";
788 return 0;
789 case hwmon_curr:
790 *str = "IP-IM";
791 return 0;
792 case hwmon_temp:
793 if (channel == LTC2947_TEMP_FAN_CHAN)
794 *str = "TEMPFAN";
795 else
796 *str = "Ambient";
797 return 0;
798 case hwmon_power:
799 *str = "Power";
800 return 0;
801 default:
802 return -ENOTSUPP;
803 }
804 }
805
ltc2947_in_is_visible(const u32 attr)806 static int ltc2947_in_is_visible(const u32 attr)
807 {
808 switch (attr) {
809 case hwmon_in_input:
810 case hwmon_in_highest:
811 case hwmon_in_lowest:
812 case hwmon_in_max_alarm:
813 case hwmon_in_min_alarm:
814 case hwmon_in_label:
815 return 0444;
816 case hwmon_in_reset_history:
817 return 0200;
818 case hwmon_in_max:
819 case hwmon_in_min:
820 return 0644;
821 default:
822 return 0;
823 }
824 }
825
ltc2947_curr_is_visible(const u32 attr)826 static int ltc2947_curr_is_visible(const u32 attr)
827 {
828 switch (attr) {
829 case hwmon_curr_input:
830 case hwmon_curr_highest:
831 case hwmon_curr_lowest:
832 case hwmon_curr_max_alarm:
833 case hwmon_curr_min_alarm:
834 case hwmon_curr_label:
835 return 0444;
836 case hwmon_curr_reset_history:
837 return 0200;
838 case hwmon_curr_max:
839 case hwmon_curr_min:
840 return 0644;
841 default:
842 return 0;
843 }
844 }
845
ltc2947_power_is_visible(const u32 attr)846 static int ltc2947_power_is_visible(const u32 attr)
847 {
848 switch (attr) {
849 case hwmon_power_input:
850 case hwmon_power_input_highest:
851 case hwmon_power_input_lowest:
852 case hwmon_power_label:
853 case hwmon_power_max_alarm:
854 case hwmon_power_min_alarm:
855 return 0444;
856 case hwmon_power_reset_history:
857 return 0200;
858 case hwmon_power_max:
859 case hwmon_power_min:
860 return 0644;
861 default:
862 return 0;
863 }
864 }
865
ltc2947_temp_is_visible(const u32 attr)866 static int ltc2947_temp_is_visible(const u32 attr)
867 {
868 switch (attr) {
869 case hwmon_temp_input:
870 case hwmon_temp_highest:
871 case hwmon_temp_lowest:
872 case hwmon_temp_max_alarm:
873 case hwmon_temp_min_alarm:
874 case hwmon_temp_label:
875 return 0444;
876 case hwmon_temp_reset_history:
877 return 0200;
878 case hwmon_temp_max:
879 case hwmon_temp_min:
880 return 0644;
881 default:
882 return 0;
883 }
884 }
885
ltc2947_is_visible(const void * data,enum hwmon_sensor_types type,u32 attr,int channel)886 static umode_t ltc2947_is_visible(const void *data,
887 enum hwmon_sensor_types type,
888 u32 attr, int channel)
889 {
890 switch (type) {
891 case hwmon_in:
892 return ltc2947_in_is_visible(attr);
893 case hwmon_curr:
894 return ltc2947_curr_is_visible(attr);
895 case hwmon_power:
896 return ltc2947_power_is_visible(attr);
897 case hwmon_temp:
898 return ltc2947_temp_is_visible(attr);
899 default:
900 return 0;
901 }
902 }
903
904 static const struct hwmon_channel_info * const ltc2947_info[] = {
905 HWMON_CHANNEL_INFO(in,
906 HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST |
907 HWMON_I_MAX | HWMON_I_MIN | HWMON_I_RESET_HISTORY |
908 HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM |
909 HWMON_I_LABEL,
910 HWMON_I_INPUT | HWMON_I_LOWEST | HWMON_I_HIGHEST |
911 HWMON_I_MAX | HWMON_I_MIN | HWMON_I_RESET_HISTORY |
912 HWMON_I_MIN_ALARM | HWMON_I_MAX_ALARM |
913 HWMON_I_LABEL),
914 HWMON_CHANNEL_INFO(curr,
915 HWMON_C_INPUT | HWMON_C_LOWEST | HWMON_C_HIGHEST |
916 HWMON_C_MAX | HWMON_C_MIN | HWMON_C_RESET_HISTORY |
917 HWMON_C_MIN_ALARM | HWMON_C_MAX_ALARM |
918 HWMON_C_LABEL),
919 HWMON_CHANNEL_INFO(power,
920 HWMON_P_INPUT | HWMON_P_INPUT_LOWEST |
921 HWMON_P_INPUT_HIGHEST | HWMON_P_MAX | HWMON_P_MIN |
922 HWMON_P_RESET_HISTORY | HWMON_P_MAX_ALARM |
923 HWMON_P_MIN_ALARM | HWMON_P_LABEL),
924 HWMON_CHANNEL_INFO(temp,
925 HWMON_T_INPUT | HWMON_T_LOWEST | HWMON_T_HIGHEST |
926 HWMON_T_MAX | HWMON_T_MIN | HWMON_T_RESET_HISTORY |
927 HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
928 HWMON_T_LABEL,
929 HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM | HWMON_T_MAX |
930 HWMON_T_MIN | HWMON_T_LABEL),
931 NULL
932 };
933
934 static const struct hwmon_ops ltc2947_hwmon_ops = {
935 .is_visible = ltc2947_is_visible,
936 .read = ltc2947_read,
937 .write = ltc2947_write,
938 .read_string = ltc2947_read_labels,
939 };
940
941 static const struct hwmon_chip_info ltc2947_chip_info = {
942 .ops = <c2947_hwmon_ops,
943 .info = ltc2947_info,
944 };
945
946 /* energy attributes are 6bytes wide so we need u64 */
947 static SENSOR_DEVICE_ATTR(energy1_input, 0444, ltc2947_show_value, NULL,
948 LTC2947_REG_ENERGY1);
949 static SENSOR_DEVICE_ATTR(energy2_input, 0444, ltc2947_show_value, NULL,
950 LTC2947_REG_ENERGY2);
951
952 static struct attribute *ltc2947_attrs[] = {
953 &sensor_dev_attr_energy1_input.dev_attr.attr,
954 &sensor_dev_attr_energy2_input.dev_attr.attr,
955 NULL,
956 };
957 ATTRIBUTE_GROUPS(ltc2947);
958
ltc2947_setup(struct ltc2947_data * st)959 static int ltc2947_setup(struct ltc2947_data *st)
960 {
961 int ret;
962 struct clk *extclk;
963 u32 dummy, deadband, pol;
964 u32 accum[2];
965
966 /* clear status register by reading it */
967 ret = regmap_read(st->map, LTC2947_REG_STATUS, &dummy);
968 if (ret)
969 return ret;
970 /*
971 * Set max/min for power here since the default values x scale
972 * would overflow on 32bit arch
973 */
974 ret = ltc2947_val_write(st, LTC2947_REG_POWER_THRE_H, LTC2947_PAGE1, 2,
975 POWER_MAX / 200000);
976 if (ret)
977 return ret;
978
979 ret = ltc2947_val_write(st, LTC2947_REG_POWER_THRE_L, LTC2947_PAGE1, 2,
980 POWER_MIN / 200000);
981 if (ret)
982 return ret;
983
984 /* check external clock presence */
985 extclk = devm_clk_get_optional_enabled(st->dev, NULL);
986 if (IS_ERR(extclk))
987 return dev_err_probe(st->dev, PTR_ERR(extclk),
988 "Failed to get external clock\n");
989
990 if (extclk) {
991 unsigned long rate_hz;
992 u8 pre = 0, div, tbctl;
993 u64 aux;
994
995 /* let's calculate and set the right valus in TBCTL */
996 rate_hz = clk_get_rate(extclk);
997 if (rate_hz < LTC2947_CLK_MIN || rate_hz > LTC2947_CLK_MAX) {
998 dev_err(st->dev, "Invalid rate:%lu for external clock",
999 rate_hz);
1000 return -EINVAL;
1001 }
1002
1003 /* as in table 1 of the datasheet */
1004 if (rate_hz >= LTC2947_CLK_MIN && rate_hz <= 1000000)
1005 pre = 0;
1006 else if (rate_hz > 1000000 && rate_hz <= 2000000)
1007 pre = 1;
1008 else if (rate_hz > 2000000 && rate_hz <= 4000000)
1009 pre = 2;
1010 else if (rate_hz > 4000000 && rate_hz <= 8000000)
1011 pre = 3;
1012 else if (rate_hz > 8000000 && rate_hz <= 16000000)
1013 pre = 4;
1014 else if (rate_hz > 16000000 && rate_hz <= LTC2947_CLK_MAX)
1015 pre = 5;
1016 /*
1017 * Div is given by:
1018 * floor(fref / (2^PRE * 32768))
1019 */
1020 div = rate_hz / ((1 << pre) * 32768);
1021 tbctl = LTC2947_PRE(pre) | LTC2947_DIV(div);
1022
1023 ret = regmap_write(st->map, LTC2947_REG_TBCTL, tbctl);
1024 if (ret)
1025 return ret;
1026 /*
1027 * The energy lsb is given by (in W*s):
1028 * 06416 * (1/fref) * 2^PRE * (DIV + 1)
1029 * The value is multiplied by 10E9
1030 */
1031 aux = (div + 1) * ((1 << pre) * 641600000ULL);
1032 st->lsb_energy = DIV_ROUND_CLOSEST_ULL(aux, rate_hz);
1033 } else {
1034 /* 19.89E-6 * 10E9 */
1035 st->lsb_energy = 19890;
1036 }
1037 ret = of_property_read_u32_array(st->dev->of_node,
1038 "adi,accumulator-ctl-pol", accum,
1039 ARRAY_SIZE(accum));
1040 if (!ret) {
1041 u32 accum_reg = LTC2947_ACCUM_POL_1(accum[0]) |
1042 LTC2947_ACCUM_POL_2(accum[1]);
1043
1044 ret = regmap_write(st->map, LTC2947_REG_ACCUM_POL, accum_reg);
1045 if (ret)
1046 return ret;
1047 }
1048 ret = of_property_read_u32(st->dev->of_node,
1049 "adi,accumulation-deadband-microamp",
1050 &deadband);
1051 if (!ret) {
1052 /* the LSB is the same as the current, so 3mA */
1053 ret = regmap_write(st->map, LTC2947_REG_ACCUM_DEADBAND,
1054 deadband / (1000 * 3));
1055 if (ret)
1056 return ret;
1057 }
1058 /* check gpio cfg */
1059 ret = of_property_read_u32(st->dev->of_node, "adi,gpio-out-pol", &pol);
1060 if (!ret) {
1061 /* setup GPIO as output */
1062 u32 gpio_ctl = LTC2947_GPIO_EN(1) | LTC2947_GPIO_FAN_EN(1) |
1063 LTC2947_GPIO_FAN_POL(pol);
1064
1065 st->gpio_out = true;
1066 ret = regmap_write(st->map, LTC2947_REG_GPIOSTATCTL, gpio_ctl);
1067 if (ret)
1068 return ret;
1069 }
1070 ret = of_property_read_u32_array(st->dev->of_node, "adi,gpio-in-accum",
1071 accum, ARRAY_SIZE(accum));
1072 if (!ret) {
1073 /*
1074 * Setup the accum options. The gpioctl is already defined as
1075 * input by default.
1076 */
1077 u32 accum_val = LTC2947_ACCUM_POL_1(accum[0]) |
1078 LTC2947_ACCUM_POL_2(accum[1]);
1079
1080 if (st->gpio_out) {
1081 dev_err(st->dev,
1082 "Cannot have input gpio config if already configured as output");
1083 return -EINVAL;
1084 }
1085
1086 ret = regmap_write(st->map, LTC2947_REG_GPIO_ACCUM, accum_val);
1087 if (ret)
1088 return ret;
1089 }
1090
1091 /* set continuos mode */
1092 return regmap_update_bits(st->map, LTC2947_REG_CTRL,
1093 LTC2947_CONT_MODE_MASK, LTC2947_CONT_MODE(1));
1094 }
1095
ltc2947_core_probe(struct regmap * map,const char * name)1096 int ltc2947_core_probe(struct regmap *map, const char *name)
1097 {
1098 struct ltc2947_data *st;
1099 struct device *dev = regmap_get_device(map);
1100 struct device *hwmon;
1101 int ret;
1102
1103 st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
1104 if (!st)
1105 return -ENOMEM;
1106
1107 st->map = map;
1108 st->dev = dev;
1109 dev_set_drvdata(dev, st);
1110 mutex_init(&st->lock);
1111
1112 ret = ltc2947_setup(st);
1113 if (ret)
1114 return ret;
1115
1116 hwmon = devm_hwmon_device_register_with_info(dev, name, st,
1117 <c2947_chip_info,
1118 ltc2947_groups);
1119 return PTR_ERR_OR_ZERO(hwmon);
1120 }
1121 EXPORT_SYMBOL_GPL(ltc2947_core_probe);
1122
ltc2947_resume(struct device * dev)1123 static int ltc2947_resume(struct device *dev)
1124 {
1125 struct ltc2947_data *st = dev_get_drvdata(dev);
1126 u32 ctrl = 0;
1127 int ret;
1128
1129 /* dummy read to wake the device */
1130 ret = regmap_read(st->map, LTC2947_REG_CTRL, &ctrl);
1131 if (ret)
1132 return ret;
1133 /*
1134 * Wait for the device. It takes 100ms to wake up so, 10ms extra
1135 * should be enough.
1136 */
1137 msleep(110);
1138 ret = regmap_read(st->map, LTC2947_REG_CTRL, &ctrl);
1139 if (ret)
1140 return ret;
1141 /* ctrl should be 0 */
1142 if (ctrl != 0) {
1143 dev_err(st->dev, "Device failed to wake up, ctl:%02X\n", ctrl);
1144 return -ETIMEDOUT;
1145 }
1146
1147 /* set continuous mode */
1148 return regmap_update_bits(st->map, LTC2947_REG_CTRL,
1149 LTC2947_CONT_MODE_MASK, LTC2947_CONT_MODE(1));
1150 }
1151
ltc2947_suspend(struct device * dev)1152 static int ltc2947_suspend(struct device *dev)
1153 {
1154 struct ltc2947_data *st = dev_get_drvdata(dev);
1155
1156 return regmap_update_bits(st->map, LTC2947_REG_CTRL,
1157 LTC2947_SHUTDOWN_MASK, 1);
1158 }
1159
1160 EXPORT_SIMPLE_DEV_PM_OPS(ltc2947_pm_ops, ltc2947_suspend, ltc2947_resume);
1161
1162 const struct of_device_id ltc2947_of_match[] = {
1163 { .compatible = "adi,ltc2947" },
1164 {}
1165 };
1166 EXPORT_SYMBOL_GPL(ltc2947_of_match);
1167 MODULE_DEVICE_TABLE(of, ltc2947_of_match);
1168
1169 MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
1170 MODULE_DESCRIPTION("LTC2947 power and energy monitor core driver");
1171 MODULE_LICENSE("GPL");
1172