1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (C) 2021 Intel Corporation
3
4 #include <linux/acpi.h>
5 #include <linux/delay.h>
6 #include <linux/i2c.h>
7 #include <linux/module.h>
8 #include <linux/pm_runtime.h>
9 #include <media/v4l2-ctrls.h>
10 #include <media/v4l2-device.h>
11 #include <asm/unaligned.h>
12
13 #define IMX208_REG_MODE_SELECT 0x0100
14 #define IMX208_MODE_STANDBY 0x00
15 #define IMX208_MODE_STREAMING 0x01
16
17 /* Chip ID */
18 #define IMX208_REG_CHIP_ID 0x0000
19 #define IMX208_CHIP_ID 0x0208
20
21 /* V_TIMING internal */
22 #define IMX208_REG_VTS 0x0340
23 #define IMX208_VTS_60FPS 0x0472
24 #define IMX208_VTS_BINNING 0x0239
25 #define IMX208_VTS_60FPS_MIN 0x0458
26 #define IMX208_VTS_BINNING_MIN 0x0230
27 #define IMX208_VTS_MAX 0xffff
28
29 /* HBLANK control - read only */
30 #define IMX208_PPL_384MHZ 2248
31 #define IMX208_PPL_96MHZ 2248
32
33 /* Exposure control */
34 #define IMX208_REG_EXPOSURE 0x0202
35 #define IMX208_EXPOSURE_MIN 4
36 #define IMX208_EXPOSURE_STEP 1
37 #define IMX208_EXPOSURE_DEFAULT 0x190
38 #define IMX208_EXPOSURE_MAX 65535
39
40 /* Analog gain control */
41 #define IMX208_REG_ANALOG_GAIN 0x0204
42 #define IMX208_ANA_GAIN_MIN 0
43 #define IMX208_ANA_GAIN_MAX 0x00e0
44 #define IMX208_ANA_GAIN_STEP 1
45 #define IMX208_ANA_GAIN_DEFAULT 0x0
46
47 /* Digital gain control */
48 #define IMX208_REG_GR_DIGITAL_GAIN 0x020e
49 #define IMX208_REG_R_DIGITAL_GAIN 0x0210
50 #define IMX208_REG_B_DIGITAL_GAIN 0x0212
51 #define IMX208_REG_GB_DIGITAL_GAIN 0x0214
52 #define IMX208_DIGITAL_GAIN_SHIFT 8
53
54 /* Orientation */
55 #define IMX208_REG_ORIENTATION_CONTROL 0x0101
56
57 /* Test Pattern Control */
58 #define IMX208_REG_TEST_PATTERN_MODE 0x0600
59 #define IMX208_TEST_PATTERN_DISABLE 0x0
60 #define IMX208_TEST_PATTERN_SOLID_COLOR 0x1
61 #define IMX208_TEST_PATTERN_COLOR_BARS 0x2
62 #define IMX208_TEST_PATTERN_GREY_COLOR 0x3
63 #define IMX208_TEST_PATTERN_PN9 0x4
64 #define IMX208_TEST_PATTERN_FIX_1 0x100
65 #define IMX208_TEST_PATTERN_FIX_2 0x101
66 #define IMX208_TEST_PATTERN_FIX_3 0x102
67 #define IMX208_TEST_PATTERN_FIX_4 0x103
68 #define IMX208_TEST_PATTERN_FIX_5 0x104
69 #define IMX208_TEST_PATTERN_FIX_6 0x105
70
71 /* OTP Access */
72 #define IMX208_OTP_BASE 0x3500
73 #define IMX208_OTP_SIZE 40
74
75 struct imx208_reg {
76 u16 address;
77 u8 val;
78 };
79
80 struct imx208_reg_list {
81 u32 num_of_regs;
82 const struct imx208_reg *regs;
83 };
84
85 /* Link frequency config */
86 struct imx208_link_freq_config {
87 u32 pixels_per_line;
88
89 /* PLL registers for this link frequency */
90 struct imx208_reg_list reg_list;
91 };
92
93 /* Mode : resolution and related config&values */
94 struct imx208_mode {
95 /* Frame width */
96 u32 width;
97 /* Frame height */
98 u32 height;
99
100 /* V-timing */
101 u32 vts_def;
102 u32 vts_min;
103
104 /* Index of Link frequency config to be used */
105 u32 link_freq_index;
106 /* Default register values */
107 struct imx208_reg_list reg_list;
108 };
109
110 static const struct imx208_reg pll_ctrl_reg[] = {
111 {0x0305, 0x02},
112 {0x0307, 0x50},
113 {0x303C, 0x3C},
114 };
115
116 static const struct imx208_reg mode_1936x1096_60fps_regs[] = {
117 {0x0340, 0x04},
118 {0x0341, 0x72},
119 {0x0342, 0x04},
120 {0x0343, 0x64},
121 {0x034C, 0x07},
122 {0x034D, 0x90},
123 {0x034E, 0x04},
124 {0x034F, 0x48},
125 {0x0381, 0x01},
126 {0x0383, 0x01},
127 {0x0385, 0x01},
128 {0x0387, 0x01},
129 {0x3048, 0x00},
130 {0x3050, 0x01},
131 {0x30D5, 0x00},
132 {0x3301, 0x00},
133 {0x3318, 0x62},
134 {0x0202, 0x01},
135 {0x0203, 0x90},
136 {0x0205, 0x00},
137 };
138
139 static const struct imx208_reg mode_968_548_60fps_regs[] = {
140 {0x0340, 0x02},
141 {0x0341, 0x39},
142 {0x0342, 0x08},
143 {0x0343, 0xC8},
144 {0x034C, 0x03},
145 {0x034D, 0xC8},
146 {0x034E, 0x02},
147 {0x034F, 0x24},
148 {0x0381, 0x01},
149 {0x0383, 0x03},
150 {0x0385, 0x01},
151 {0x0387, 0x03},
152 {0x3048, 0x01},
153 {0x3050, 0x02},
154 {0x30D5, 0x03},
155 {0x3301, 0x10},
156 {0x3318, 0x75},
157 {0x0202, 0x01},
158 {0x0203, 0x90},
159 {0x0205, 0x00},
160 };
161
162 static const s64 imx208_discrete_digital_gain[] = {
163 1, 2, 4, 8, 16,
164 };
165
166 static const char * const imx208_test_pattern_menu[] = {
167 "Disabled",
168 "Solid Color",
169 "100% Color Bar",
170 "Fade to Grey Color Bar",
171 "PN9",
172 "Fixed Pattern1",
173 "Fixed Pattern2",
174 "Fixed Pattern3",
175 "Fixed Pattern4",
176 "Fixed Pattern5",
177 "Fixed Pattern6"
178 };
179
180 static const int imx208_test_pattern_val[] = {
181 IMX208_TEST_PATTERN_DISABLE,
182 IMX208_TEST_PATTERN_SOLID_COLOR,
183 IMX208_TEST_PATTERN_COLOR_BARS,
184 IMX208_TEST_PATTERN_GREY_COLOR,
185 IMX208_TEST_PATTERN_PN9,
186 IMX208_TEST_PATTERN_FIX_1,
187 IMX208_TEST_PATTERN_FIX_2,
188 IMX208_TEST_PATTERN_FIX_3,
189 IMX208_TEST_PATTERN_FIX_4,
190 IMX208_TEST_PATTERN_FIX_5,
191 IMX208_TEST_PATTERN_FIX_6,
192 };
193
194 /* Configurations for supported link frequencies */
195 #define IMX208_MHZ (1000 * 1000ULL)
196 #define IMX208_LINK_FREQ_384MHZ (384ULL * IMX208_MHZ)
197 #define IMX208_LINK_FREQ_96MHZ (96ULL * IMX208_MHZ)
198
199 #define IMX208_DATA_RATE_DOUBLE 2
200 #define IMX208_NUM_OF_LANES 2
201 #define IMX208_PIXEL_BITS 10
202
203 enum {
204 IMX208_LINK_FREQ_384MHZ_INDEX,
205 IMX208_LINK_FREQ_96MHZ_INDEX,
206 };
207
208 /*
209 * pixel_rate = link_freq * data-rate * nr_of_lanes / bits_per_sample
210 * data rate => double data rate; number of lanes => 2; bits per pixel => 10
211 */
link_freq_to_pixel_rate(u64 f)212 static u64 link_freq_to_pixel_rate(u64 f)
213 {
214 f *= IMX208_DATA_RATE_DOUBLE * IMX208_NUM_OF_LANES;
215 do_div(f, IMX208_PIXEL_BITS);
216
217 return f;
218 }
219
220 /* Menu items for LINK_FREQ V4L2 control */
221 static const s64 link_freq_menu_items[] = {
222 [IMX208_LINK_FREQ_384MHZ_INDEX] = IMX208_LINK_FREQ_384MHZ,
223 [IMX208_LINK_FREQ_96MHZ_INDEX] = IMX208_LINK_FREQ_96MHZ,
224 };
225
226 /* Link frequency configs */
227 static const struct imx208_link_freq_config link_freq_configs[] = {
228 [IMX208_LINK_FREQ_384MHZ_INDEX] = {
229 .pixels_per_line = IMX208_PPL_384MHZ,
230 .reg_list = {
231 .num_of_regs = ARRAY_SIZE(pll_ctrl_reg),
232 .regs = pll_ctrl_reg,
233 }
234 },
235 [IMX208_LINK_FREQ_96MHZ_INDEX] = {
236 .pixels_per_line = IMX208_PPL_96MHZ,
237 .reg_list = {
238 .num_of_regs = ARRAY_SIZE(pll_ctrl_reg),
239 .regs = pll_ctrl_reg,
240 }
241 },
242 };
243
244 /* Mode configs */
245 static const struct imx208_mode supported_modes[] = {
246 {
247 .width = 1936,
248 .height = 1096,
249 .vts_def = IMX208_VTS_60FPS,
250 .vts_min = IMX208_VTS_60FPS_MIN,
251 .reg_list = {
252 .num_of_regs = ARRAY_SIZE(mode_1936x1096_60fps_regs),
253 .regs = mode_1936x1096_60fps_regs,
254 },
255 .link_freq_index = IMX208_LINK_FREQ_384MHZ_INDEX,
256 },
257 {
258 .width = 968,
259 .height = 548,
260 .vts_def = IMX208_VTS_BINNING,
261 .vts_min = IMX208_VTS_BINNING_MIN,
262 .reg_list = {
263 .num_of_regs = ARRAY_SIZE(mode_968_548_60fps_regs),
264 .regs = mode_968_548_60fps_regs,
265 },
266 .link_freq_index = IMX208_LINK_FREQ_96MHZ_INDEX,
267 },
268 };
269
270 struct imx208 {
271 struct v4l2_subdev sd;
272 struct media_pad pad;
273
274 struct v4l2_ctrl_handler ctrl_handler;
275 /* V4L2 Controls */
276 struct v4l2_ctrl *link_freq;
277 struct v4l2_ctrl *pixel_rate;
278 struct v4l2_ctrl *vblank;
279 struct v4l2_ctrl *hblank;
280 struct v4l2_ctrl *vflip;
281 struct v4l2_ctrl *hflip;
282
283 /* Current mode */
284 const struct imx208_mode *cur_mode;
285
286 /*
287 * Mutex for serialized access:
288 * Protect sensor set pad format and start/stop streaming safely.
289 * Protect access to sensor v4l2 controls.
290 */
291 struct mutex imx208_mx;
292
293 /* Streaming on/off */
294 bool streaming;
295
296 /* OTP data */
297 bool otp_read;
298 char otp_data[IMX208_OTP_SIZE];
299
300 /* True if the device has been identified */
301 bool identified;
302 };
303
to_imx208(struct v4l2_subdev * _sd)304 static inline struct imx208 *to_imx208(struct v4l2_subdev *_sd)
305 {
306 return container_of(_sd, struct imx208, sd);
307 }
308
309 /* Get bayer order based on flip setting. */
imx208_get_format_code(struct imx208 * imx208)310 static u32 imx208_get_format_code(struct imx208 *imx208)
311 {
312 /*
313 * Only one bayer order is supported.
314 * It depends on the flip settings.
315 */
316 static const u32 codes[2][2] = {
317 { MEDIA_BUS_FMT_SRGGB10_1X10, MEDIA_BUS_FMT_SGRBG10_1X10, },
318 { MEDIA_BUS_FMT_SGBRG10_1X10, MEDIA_BUS_FMT_SBGGR10_1X10, },
319 };
320
321 return codes[imx208->vflip->val][imx208->hflip->val];
322 }
323
324 /* Read registers up to 4 at a time */
imx208_read_reg(struct imx208 * imx208,u16 reg,u32 len,u32 * val)325 static int imx208_read_reg(struct imx208 *imx208, u16 reg, u32 len, u32 *val)
326 {
327 struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
328 struct i2c_msg msgs[2];
329 u8 addr_buf[2] = { reg >> 8, reg & 0xff };
330 u8 data_buf[4] = { 0, };
331 int ret;
332
333 if (len > 4)
334 return -EINVAL;
335
336 /* Write register address */
337 msgs[0].addr = client->addr;
338 msgs[0].flags = 0;
339 msgs[0].len = ARRAY_SIZE(addr_buf);
340 msgs[0].buf = addr_buf;
341
342 /* Read data from register */
343 msgs[1].addr = client->addr;
344 msgs[1].flags = I2C_M_RD;
345 msgs[1].len = len;
346 msgs[1].buf = &data_buf[4 - len];
347
348 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
349 if (ret != ARRAY_SIZE(msgs))
350 return -EIO;
351
352 *val = get_unaligned_be32(data_buf);
353
354 return 0;
355 }
356
357 /* Write registers up to 4 at a time */
imx208_write_reg(struct imx208 * imx208,u16 reg,u32 len,u32 val)358 static int imx208_write_reg(struct imx208 *imx208, u16 reg, u32 len, u32 val)
359 {
360 struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
361 u8 buf[6];
362
363 if (len > 4)
364 return -EINVAL;
365
366 put_unaligned_be16(reg, buf);
367 put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
368 if (i2c_master_send(client, buf, len + 2) != len + 2)
369 return -EIO;
370
371 return 0;
372 }
373
374 /* Write a list of registers */
imx208_write_regs(struct imx208 * imx208,const struct imx208_reg * regs,u32 len)375 static int imx208_write_regs(struct imx208 *imx208,
376 const struct imx208_reg *regs, u32 len)
377 {
378 struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
379 unsigned int i;
380 int ret;
381
382 for (i = 0; i < len; i++) {
383 ret = imx208_write_reg(imx208, regs[i].address, 1,
384 regs[i].val);
385 if (ret) {
386 dev_err_ratelimited(&client->dev,
387 "Failed to write reg 0x%4.4x. error = %d\n",
388 regs[i].address, ret);
389
390 return ret;
391 }
392 }
393
394 return 0;
395 }
396
397 /* Open sub-device */
imx208_open(struct v4l2_subdev * sd,struct v4l2_subdev_fh * fh)398 static int imx208_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
399 {
400 struct v4l2_mbus_framefmt *try_fmt =
401 v4l2_subdev_get_try_format(sd, fh->state, 0);
402
403 /* Initialize try_fmt */
404 try_fmt->width = supported_modes[0].width;
405 try_fmt->height = supported_modes[0].height;
406 try_fmt->code = MEDIA_BUS_FMT_SRGGB10_1X10;
407 try_fmt->field = V4L2_FIELD_NONE;
408
409 return 0;
410 }
411
imx208_update_digital_gain(struct imx208 * imx208,u32 len,u32 val)412 static int imx208_update_digital_gain(struct imx208 *imx208, u32 len, u32 val)
413 {
414 int ret;
415
416 val = imx208_discrete_digital_gain[val] << IMX208_DIGITAL_GAIN_SHIFT;
417
418 ret = imx208_write_reg(imx208, IMX208_REG_GR_DIGITAL_GAIN, 2, val);
419 if (ret)
420 return ret;
421
422 ret = imx208_write_reg(imx208, IMX208_REG_GB_DIGITAL_GAIN, 2, val);
423 if (ret)
424 return ret;
425
426 ret = imx208_write_reg(imx208, IMX208_REG_R_DIGITAL_GAIN, 2, val);
427 if (ret)
428 return ret;
429
430 return imx208_write_reg(imx208, IMX208_REG_B_DIGITAL_GAIN, 2, val);
431 }
432
imx208_set_ctrl(struct v4l2_ctrl * ctrl)433 static int imx208_set_ctrl(struct v4l2_ctrl *ctrl)
434 {
435 struct imx208 *imx208 =
436 container_of(ctrl->handler, struct imx208, ctrl_handler);
437 struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
438 int ret;
439
440 /*
441 * Applying V4L2 control value only happens
442 * when power is up for streaming
443 */
444 if (!pm_runtime_get_if_in_use(&client->dev))
445 return 0;
446
447 switch (ctrl->id) {
448 case V4L2_CID_ANALOGUE_GAIN:
449 ret = imx208_write_reg(imx208, IMX208_REG_ANALOG_GAIN,
450 2, ctrl->val);
451 break;
452 case V4L2_CID_EXPOSURE:
453 ret = imx208_write_reg(imx208, IMX208_REG_EXPOSURE,
454 2, ctrl->val);
455 break;
456 case V4L2_CID_DIGITAL_GAIN:
457 ret = imx208_update_digital_gain(imx208, 2, ctrl->val);
458 break;
459 case V4L2_CID_VBLANK:
460 /* Update VTS that meets expected vertical blanking */
461 ret = imx208_write_reg(imx208, IMX208_REG_VTS, 2,
462 imx208->cur_mode->height + ctrl->val);
463 break;
464 case V4L2_CID_TEST_PATTERN:
465 ret = imx208_write_reg(imx208, IMX208_REG_TEST_PATTERN_MODE,
466 2, imx208_test_pattern_val[ctrl->val]);
467 break;
468 case V4L2_CID_HFLIP:
469 case V4L2_CID_VFLIP:
470 ret = imx208_write_reg(imx208, IMX208_REG_ORIENTATION_CONTROL,
471 1,
472 imx208->hflip->val |
473 imx208->vflip->val << 1);
474 break;
475 default:
476 ret = -EINVAL;
477 dev_err(&client->dev,
478 "ctrl(id:0x%x,val:0x%x) is not handled\n",
479 ctrl->id, ctrl->val);
480 break;
481 }
482
483 pm_runtime_put(&client->dev);
484
485 return ret;
486 }
487
488 static const struct v4l2_ctrl_ops imx208_ctrl_ops = {
489 .s_ctrl = imx208_set_ctrl,
490 };
491
492 static const struct v4l2_ctrl_config imx208_digital_gain_control = {
493 .ops = &imx208_ctrl_ops,
494 .id = V4L2_CID_DIGITAL_GAIN,
495 .name = "Digital Gain",
496 .type = V4L2_CTRL_TYPE_INTEGER_MENU,
497 .min = 0,
498 .max = ARRAY_SIZE(imx208_discrete_digital_gain) - 1,
499 .step = 0,
500 .def = 0,
501 .menu_skip_mask = 0,
502 .qmenu_int = imx208_discrete_digital_gain,
503 };
504
imx208_enum_mbus_code(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_mbus_code_enum * code)505 static int imx208_enum_mbus_code(struct v4l2_subdev *sd,
506 struct v4l2_subdev_state *sd_state,
507 struct v4l2_subdev_mbus_code_enum *code)
508 {
509 struct imx208 *imx208 = to_imx208(sd);
510
511 if (code->index > 0)
512 return -EINVAL;
513
514 code->code = imx208_get_format_code(imx208);
515
516 return 0;
517 }
518
imx208_enum_frame_size(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_frame_size_enum * fse)519 static int imx208_enum_frame_size(struct v4l2_subdev *sd,
520 struct v4l2_subdev_state *sd_state,
521 struct v4l2_subdev_frame_size_enum *fse)
522 {
523 struct imx208 *imx208 = to_imx208(sd);
524
525 if (fse->index >= ARRAY_SIZE(supported_modes))
526 return -EINVAL;
527
528 if (fse->code != imx208_get_format_code(imx208))
529 return -EINVAL;
530
531 fse->min_width = supported_modes[fse->index].width;
532 fse->max_width = fse->min_width;
533 fse->min_height = supported_modes[fse->index].height;
534 fse->max_height = fse->min_height;
535
536 return 0;
537 }
538
imx208_mode_to_pad_format(struct imx208 * imx208,const struct imx208_mode * mode,struct v4l2_subdev_format * fmt)539 static void imx208_mode_to_pad_format(struct imx208 *imx208,
540 const struct imx208_mode *mode,
541 struct v4l2_subdev_format *fmt)
542 {
543 fmt->format.width = mode->width;
544 fmt->format.height = mode->height;
545 fmt->format.code = imx208_get_format_code(imx208);
546 fmt->format.field = V4L2_FIELD_NONE;
547 }
548
__imx208_get_pad_format(struct imx208 * imx208,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)549 static int __imx208_get_pad_format(struct imx208 *imx208,
550 struct v4l2_subdev_state *sd_state,
551 struct v4l2_subdev_format *fmt)
552 {
553 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
554 fmt->format = *v4l2_subdev_get_try_format(&imx208->sd,
555 sd_state,
556 fmt->pad);
557 else
558 imx208_mode_to_pad_format(imx208, imx208->cur_mode, fmt);
559
560 return 0;
561 }
562
imx208_get_pad_format(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)563 static int imx208_get_pad_format(struct v4l2_subdev *sd,
564 struct v4l2_subdev_state *sd_state,
565 struct v4l2_subdev_format *fmt)
566 {
567 struct imx208 *imx208 = to_imx208(sd);
568 int ret;
569
570 mutex_lock(&imx208->imx208_mx);
571 ret = __imx208_get_pad_format(imx208, sd_state, fmt);
572 mutex_unlock(&imx208->imx208_mx);
573
574 return ret;
575 }
576
imx208_set_pad_format(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)577 static int imx208_set_pad_format(struct v4l2_subdev *sd,
578 struct v4l2_subdev_state *sd_state,
579 struct v4l2_subdev_format *fmt)
580 {
581 struct imx208 *imx208 = to_imx208(sd);
582 const struct imx208_mode *mode;
583 s32 vblank_def;
584 s32 vblank_min;
585 s64 h_blank;
586 s64 pixel_rate;
587 s64 link_freq;
588
589 mutex_lock(&imx208->imx208_mx);
590
591 fmt->format.code = imx208_get_format_code(imx208);
592 mode = v4l2_find_nearest_size(supported_modes,
593 ARRAY_SIZE(supported_modes), width, height,
594 fmt->format.width, fmt->format.height);
595 imx208_mode_to_pad_format(imx208, mode, fmt);
596 if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
597 *v4l2_subdev_get_try_format(sd, sd_state, fmt->pad) = fmt->format;
598 } else {
599 imx208->cur_mode = mode;
600 __v4l2_ctrl_s_ctrl(imx208->link_freq, mode->link_freq_index);
601 link_freq = link_freq_menu_items[mode->link_freq_index];
602 pixel_rate = link_freq_to_pixel_rate(link_freq);
603 __v4l2_ctrl_s_ctrl_int64(imx208->pixel_rate, pixel_rate);
604 /* Update limits and set FPS to default */
605 vblank_def = imx208->cur_mode->vts_def -
606 imx208->cur_mode->height;
607 vblank_min = imx208->cur_mode->vts_min -
608 imx208->cur_mode->height;
609 __v4l2_ctrl_modify_range(imx208->vblank, vblank_min,
610 IMX208_VTS_MAX - imx208->cur_mode->height,
611 1, vblank_def);
612 __v4l2_ctrl_s_ctrl(imx208->vblank, vblank_def);
613 h_blank =
614 link_freq_configs[mode->link_freq_index].pixels_per_line
615 - imx208->cur_mode->width;
616 __v4l2_ctrl_modify_range(imx208->hblank, h_blank,
617 h_blank, 1, h_blank);
618 }
619
620 mutex_unlock(&imx208->imx208_mx);
621
622 return 0;
623 }
624
imx208_identify_module(struct imx208 * imx208)625 static int imx208_identify_module(struct imx208 *imx208)
626 {
627 struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
628 int ret;
629 u32 val;
630
631 if (imx208->identified)
632 return 0;
633
634 ret = imx208_read_reg(imx208, IMX208_REG_CHIP_ID,
635 2, &val);
636 if (ret) {
637 dev_err(&client->dev, "failed to read chip id %x\n",
638 IMX208_CHIP_ID);
639 return ret;
640 }
641
642 if (val != IMX208_CHIP_ID) {
643 dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
644 IMX208_CHIP_ID, val);
645 return -EIO;
646 }
647
648 imx208->identified = true;
649
650 return 0;
651 }
652
653 /* Start streaming */
imx208_start_streaming(struct imx208 * imx208)654 static int imx208_start_streaming(struct imx208 *imx208)
655 {
656 struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
657 const struct imx208_reg_list *reg_list;
658 int ret, link_freq_index;
659
660 ret = imx208_identify_module(imx208);
661 if (ret)
662 return ret;
663
664 /* Setup PLL */
665 link_freq_index = imx208->cur_mode->link_freq_index;
666 reg_list = &link_freq_configs[link_freq_index].reg_list;
667 ret = imx208_write_regs(imx208, reg_list->regs, reg_list->num_of_regs);
668 if (ret) {
669 dev_err(&client->dev, "%s failed to set plls\n", __func__);
670 return ret;
671 }
672
673 /* Apply default values of current mode */
674 reg_list = &imx208->cur_mode->reg_list;
675 ret = imx208_write_regs(imx208, reg_list->regs, reg_list->num_of_regs);
676 if (ret) {
677 dev_err(&client->dev, "%s failed to set mode\n", __func__);
678 return ret;
679 }
680
681 /* Apply customized values from user */
682 ret = __v4l2_ctrl_handler_setup(imx208->sd.ctrl_handler);
683 if (ret)
684 return ret;
685
686 /* set stream on register */
687 return imx208_write_reg(imx208, IMX208_REG_MODE_SELECT,
688 1, IMX208_MODE_STREAMING);
689 }
690
691 /* Stop streaming */
imx208_stop_streaming(struct imx208 * imx208)692 static int imx208_stop_streaming(struct imx208 *imx208)
693 {
694 struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
695 int ret;
696
697 /* set stream off register */
698 ret = imx208_write_reg(imx208, IMX208_REG_MODE_SELECT,
699 1, IMX208_MODE_STANDBY);
700 if (ret)
701 dev_err(&client->dev, "%s failed to set stream\n", __func__);
702
703 /*
704 * Return success even if it was an error, as there is nothing the
705 * caller can do about it.
706 */
707 return 0;
708 }
709
imx208_set_stream(struct v4l2_subdev * sd,int enable)710 static int imx208_set_stream(struct v4l2_subdev *sd, int enable)
711 {
712 struct imx208 *imx208 = to_imx208(sd);
713 struct i2c_client *client = v4l2_get_subdevdata(sd);
714 int ret = 0;
715
716 mutex_lock(&imx208->imx208_mx);
717 if (imx208->streaming == enable) {
718 mutex_unlock(&imx208->imx208_mx);
719 return 0;
720 }
721
722 if (enable) {
723 ret = pm_runtime_get_sync(&client->dev);
724 if (ret < 0)
725 goto err_rpm_put;
726
727 /*
728 * Apply default & customized values
729 * and then start streaming.
730 */
731 ret = imx208_start_streaming(imx208);
732 if (ret)
733 goto err_rpm_put;
734 } else {
735 imx208_stop_streaming(imx208);
736 pm_runtime_put(&client->dev);
737 }
738
739 imx208->streaming = enable;
740 mutex_unlock(&imx208->imx208_mx);
741
742 /* vflip and hflip cannot change during streaming */
743 v4l2_ctrl_grab(imx208->vflip, enable);
744 v4l2_ctrl_grab(imx208->hflip, enable);
745
746 return ret;
747
748 err_rpm_put:
749 pm_runtime_put(&client->dev);
750 mutex_unlock(&imx208->imx208_mx);
751
752 return ret;
753 }
754
imx208_suspend(struct device * dev)755 static int __maybe_unused imx208_suspend(struct device *dev)
756 {
757 struct i2c_client *client = to_i2c_client(dev);
758 struct v4l2_subdev *sd = i2c_get_clientdata(client);
759 struct imx208 *imx208 = to_imx208(sd);
760
761 if (imx208->streaming)
762 imx208_stop_streaming(imx208);
763
764 return 0;
765 }
766
imx208_resume(struct device * dev)767 static int __maybe_unused imx208_resume(struct device *dev)
768 {
769 struct i2c_client *client = to_i2c_client(dev);
770 struct v4l2_subdev *sd = i2c_get_clientdata(client);
771 struct imx208 *imx208 = to_imx208(sd);
772 int ret;
773
774 if (imx208->streaming) {
775 ret = imx208_start_streaming(imx208);
776 if (ret)
777 goto error;
778 }
779
780 return 0;
781
782 error:
783 imx208_stop_streaming(imx208);
784 imx208->streaming = 0;
785
786 return ret;
787 }
788
789 /* Verify chip ID */
790 static const struct v4l2_subdev_video_ops imx208_video_ops = {
791 .s_stream = imx208_set_stream,
792 };
793
794 static const struct v4l2_subdev_pad_ops imx208_pad_ops = {
795 .enum_mbus_code = imx208_enum_mbus_code,
796 .get_fmt = imx208_get_pad_format,
797 .set_fmt = imx208_set_pad_format,
798 .enum_frame_size = imx208_enum_frame_size,
799 };
800
801 static const struct v4l2_subdev_ops imx208_subdev_ops = {
802 .video = &imx208_video_ops,
803 .pad = &imx208_pad_ops,
804 };
805
806 static const struct v4l2_subdev_internal_ops imx208_internal_ops = {
807 .open = imx208_open,
808 };
809
imx208_read_otp(struct imx208 * imx208)810 static int imx208_read_otp(struct imx208 *imx208)
811 {
812 struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
813 struct i2c_msg msgs[2];
814 u8 addr_buf[2] = { IMX208_OTP_BASE >> 8, IMX208_OTP_BASE & 0xff };
815 int ret = 0;
816
817 mutex_lock(&imx208->imx208_mx);
818
819 if (imx208->otp_read)
820 goto out_unlock;
821
822 ret = pm_runtime_get_sync(&client->dev);
823 if (ret < 0) {
824 pm_runtime_put_noidle(&client->dev);
825 goto out_unlock;
826 }
827
828 ret = imx208_identify_module(imx208);
829 if (ret)
830 goto out_pm_put;
831
832 /* Write register address */
833 msgs[0].addr = client->addr;
834 msgs[0].flags = 0;
835 msgs[0].len = ARRAY_SIZE(addr_buf);
836 msgs[0].buf = addr_buf;
837
838 /* Read data from registers */
839 msgs[1].addr = client->addr;
840 msgs[1].flags = I2C_M_RD;
841 msgs[1].len = sizeof(imx208->otp_data);
842 msgs[1].buf = imx208->otp_data;
843
844 ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
845 if (ret == ARRAY_SIZE(msgs)) {
846 imx208->otp_read = true;
847 ret = 0;
848 }
849
850 out_pm_put:
851 pm_runtime_put(&client->dev);
852
853 out_unlock:
854 mutex_unlock(&imx208->imx208_mx);
855
856 return ret;
857 }
858
otp_read(struct file * filp,struct kobject * kobj,struct bin_attribute * bin_attr,char * buf,loff_t off,size_t count)859 static ssize_t otp_read(struct file *filp, struct kobject *kobj,
860 struct bin_attribute *bin_attr,
861 char *buf, loff_t off, size_t count)
862 {
863 struct i2c_client *client = to_i2c_client(kobj_to_dev(kobj));
864 struct v4l2_subdev *sd = i2c_get_clientdata(client);
865 struct imx208 *imx208 = to_imx208(sd);
866 int ret;
867
868 ret = imx208_read_otp(imx208);
869 if (ret)
870 return ret;
871
872 memcpy(buf, &imx208->otp_data[off], count);
873 return count;
874 }
875
876 static const BIN_ATTR_RO(otp, IMX208_OTP_SIZE);
877
878 /* Initialize control handlers */
imx208_init_controls(struct imx208 * imx208)879 static int imx208_init_controls(struct imx208 *imx208)
880 {
881 struct i2c_client *client = v4l2_get_subdevdata(&imx208->sd);
882 struct v4l2_ctrl_handler *ctrl_hdlr = &imx208->ctrl_handler;
883 s64 exposure_max;
884 s64 vblank_def;
885 s64 vblank_min;
886 s64 pixel_rate_min;
887 s64 pixel_rate_max;
888 int ret;
889
890 ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
891 if (ret)
892 return ret;
893
894 mutex_init(&imx208->imx208_mx);
895 ctrl_hdlr->lock = &imx208->imx208_mx;
896 imx208->link_freq =
897 v4l2_ctrl_new_int_menu(ctrl_hdlr,
898 &imx208_ctrl_ops,
899 V4L2_CID_LINK_FREQ,
900 ARRAY_SIZE(link_freq_menu_items) - 1,
901 0, link_freq_menu_items);
902
903 if (imx208->link_freq)
904 imx208->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
905
906 pixel_rate_max = link_freq_to_pixel_rate(link_freq_menu_items[0]);
907 pixel_rate_min =
908 link_freq_to_pixel_rate(link_freq_menu_items[ARRAY_SIZE(link_freq_menu_items) - 1]);
909 /* By default, PIXEL_RATE is read only */
910 imx208->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx208_ctrl_ops,
911 V4L2_CID_PIXEL_RATE,
912 pixel_rate_min, pixel_rate_max,
913 1, pixel_rate_max);
914
915 vblank_def = imx208->cur_mode->vts_def - imx208->cur_mode->height;
916 vblank_min = imx208->cur_mode->vts_min - imx208->cur_mode->height;
917 imx208->vblank =
918 v4l2_ctrl_new_std(ctrl_hdlr, &imx208_ctrl_ops, V4L2_CID_VBLANK,
919 vblank_min,
920 IMX208_VTS_MAX - imx208->cur_mode->height, 1,
921 vblank_def);
922
923 imx208->hblank =
924 v4l2_ctrl_new_std(ctrl_hdlr, &imx208_ctrl_ops, V4L2_CID_HBLANK,
925 IMX208_PPL_384MHZ - imx208->cur_mode->width,
926 IMX208_PPL_384MHZ - imx208->cur_mode->width,
927 1,
928 IMX208_PPL_384MHZ - imx208->cur_mode->width);
929
930 if (imx208->hblank)
931 imx208->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
932
933 exposure_max = imx208->cur_mode->vts_def - 8;
934 v4l2_ctrl_new_std(ctrl_hdlr, &imx208_ctrl_ops, V4L2_CID_EXPOSURE,
935 IMX208_EXPOSURE_MIN, exposure_max,
936 IMX208_EXPOSURE_STEP, IMX208_EXPOSURE_DEFAULT);
937
938 imx208->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx208_ctrl_ops,
939 V4L2_CID_HFLIP, 0, 1, 1, 0);
940 if (imx208->hflip)
941 imx208->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
942 imx208->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx208_ctrl_ops,
943 V4L2_CID_VFLIP, 0, 1, 1, 0);
944 if (imx208->vflip)
945 imx208->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
946
947 v4l2_ctrl_new_std(ctrl_hdlr, &imx208_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
948 IMX208_ANA_GAIN_MIN, IMX208_ANA_GAIN_MAX,
949 IMX208_ANA_GAIN_STEP, IMX208_ANA_GAIN_DEFAULT);
950
951 v4l2_ctrl_new_custom(ctrl_hdlr, &imx208_digital_gain_control, NULL);
952
953 v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx208_ctrl_ops,
954 V4L2_CID_TEST_PATTERN,
955 ARRAY_SIZE(imx208_test_pattern_menu) - 1,
956 0, 0, imx208_test_pattern_menu);
957
958 if (ctrl_hdlr->error) {
959 ret = ctrl_hdlr->error;
960 dev_err(&client->dev, "%s control init failed (%d)\n",
961 __func__, ret);
962 goto error;
963 }
964
965 imx208->sd.ctrl_handler = ctrl_hdlr;
966
967 return 0;
968
969 error:
970 v4l2_ctrl_handler_free(ctrl_hdlr);
971 mutex_destroy(&imx208->imx208_mx);
972
973 return ret;
974 }
975
imx208_free_controls(struct imx208 * imx208)976 static void imx208_free_controls(struct imx208 *imx208)
977 {
978 v4l2_ctrl_handler_free(imx208->sd.ctrl_handler);
979 }
980
imx208_probe(struct i2c_client * client)981 static int imx208_probe(struct i2c_client *client)
982 {
983 struct imx208 *imx208;
984 int ret;
985 bool full_power;
986 u32 val = 0;
987
988 device_property_read_u32(&client->dev, "clock-frequency", &val);
989 if (val != 19200000) {
990 dev_err(&client->dev,
991 "Unsupported clock-frequency %u. Expected 19200000.\n",
992 val);
993 return -EINVAL;
994 }
995
996 imx208 = devm_kzalloc(&client->dev, sizeof(*imx208), GFP_KERNEL);
997 if (!imx208)
998 return -ENOMEM;
999
1000 /* Initialize subdev */
1001 v4l2_i2c_subdev_init(&imx208->sd, client, &imx208_subdev_ops);
1002
1003 full_power = acpi_dev_state_d0(&client->dev);
1004 if (full_power) {
1005 /* Check module identity */
1006 ret = imx208_identify_module(imx208);
1007 if (ret) {
1008 dev_err(&client->dev, "failed to find sensor: %d", ret);
1009 goto error_probe;
1010 }
1011 }
1012
1013 /* Set default mode to max resolution */
1014 imx208->cur_mode = &supported_modes[0];
1015
1016 ret = imx208_init_controls(imx208);
1017 if (ret) {
1018 dev_err(&client->dev, "failed to init controls: %d", ret);
1019 goto error_probe;
1020 }
1021
1022 /* Initialize subdev */
1023 imx208->sd.internal_ops = &imx208_internal_ops;
1024 imx208->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1025 imx208->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
1026
1027 /* Initialize source pad */
1028 imx208->pad.flags = MEDIA_PAD_FL_SOURCE;
1029 ret = media_entity_pads_init(&imx208->sd.entity, 1, &imx208->pad);
1030 if (ret) {
1031 dev_err(&client->dev, "%s failed:%d\n", __func__, ret);
1032 goto error_handler_free;
1033 }
1034
1035 ret = v4l2_async_register_subdev_sensor(&imx208->sd);
1036 if (ret < 0)
1037 goto error_media_entity;
1038
1039 ret = device_create_bin_file(&client->dev, &bin_attr_otp);
1040 if (ret) {
1041 dev_err(&client->dev, "sysfs otp creation failed\n");
1042 goto error_async_subdev;
1043 }
1044
1045 /* Set the device's state to active if it's in D0 state. */
1046 if (full_power)
1047 pm_runtime_set_active(&client->dev);
1048 pm_runtime_enable(&client->dev);
1049 pm_runtime_idle(&client->dev);
1050
1051 return 0;
1052
1053 error_async_subdev:
1054 v4l2_async_unregister_subdev(&imx208->sd);
1055
1056 error_media_entity:
1057 media_entity_cleanup(&imx208->sd.entity);
1058
1059 error_handler_free:
1060 imx208_free_controls(imx208);
1061
1062 error_probe:
1063 mutex_destroy(&imx208->imx208_mx);
1064
1065 return ret;
1066 }
1067
imx208_remove(struct i2c_client * client)1068 static void imx208_remove(struct i2c_client *client)
1069 {
1070 struct v4l2_subdev *sd = i2c_get_clientdata(client);
1071 struct imx208 *imx208 = to_imx208(sd);
1072
1073 device_remove_bin_file(&client->dev, &bin_attr_otp);
1074 v4l2_async_unregister_subdev(sd);
1075 media_entity_cleanup(&sd->entity);
1076 imx208_free_controls(imx208);
1077
1078 pm_runtime_disable(&client->dev);
1079 pm_runtime_set_suspended(&client->dev);
1080
1081 mutex_destroy(&imx208->imx208_mx);
1082 }
1083
1084 static const struct dev_pm_ops imx208_pm_ops = {
1085 SET_SYSTEM_SLEEP_PM_OPS(imx208_suspend, imx208_resume)
1086 };
1087
1088 #ifdef CONFIG_ACPI
1089 static const struct acpi_device_id imx208_acpi_ids[] = {
1090 { "INT3478" },
1091 { /* sentinel */ }
1092 };
1093
1094 MODULE_DEVICE_TABLE(acpi, imx208_acpi_ids);
1095 #endif
1096
1097 static struct i2c_driver imx208_i2c_driver = {
1098 .driver = {
1099 .name = "imx208",
1100 .pm = &imx208_pm_ops,
1101 .acpi_match_table = ACPI_PTR(imx208_acpi_ids),
1102 },
1103 .probe = imx208_probe,
1104 .remove = imx208_remove,
1105 .flags = I2C_DRV_ACPI_WAIVE_D0_PROBE,
1106 };
1107
1108 module_i2c_driver(imx208_i2c_driver);
1109
1110 MODULE_AUTHOR("Yeh, Andy <andy.yeh@intel.com>");
1111 MODULE_AUTHOR("Chen, Ping-chung <ping-chung.chen@intel.com>");
1112 MODULE_AUTHOR("Shawn Tu");
1113 MODULE_DESCRIPTION("Sony IMX208 sensor driver");
1114 MODULE_LICENSE("GPL v2");
1115