1 /* SPDX-License-Identifier: GPL-1.0+ */
2 /*
3 * OHCI HCD (Host Controller Driver) for USB.
4 *
5 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
6 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
7 *
8 * This file is licenced under the GPL.
9 */
10
11 /*
12 * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
13 * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
14 * host controller implementation.
15 */
16 typedef __u32 __bitwise __hc32;
17 typedef __u16 __bitwise __hc16;
18
19 /*
20 * OHCI Endpoint Descriptor (ED) ... holds TD queue
21 * See OHCI spec, section 4.2
22 *
23 * This is a "Queue Head" for those transfers, which is why
24 * both EHCI and UHCI call similar structures a "QH".
25 */
26 struct ed {
27 /* first fields are hardware-specified */
28 __hc32 hwINFO; /* endpoint config bitmap */
29 /* info bits defined by hcd */
30 #define ED_DEQUEUE (1 << 27)
31 /* info bits defined by the hardware */
32 #define ED_ISO (1 << 15)
33 #define ED_SKIP (1 << 14)
34 #define ED_LOWSPEED (1 << 13)
35 #define ED_OUT (0x01 << 11)
36 #define ED_IN (0x02 << 11)
37 __hc32 hwTailP; /* tail of TD list */
38 __hc32 hwHeadP; /* head of TD list (hc r/w) */
39 #define ED_C (0x02) /* toggle carry */
40 #define ED_H (0x01) /* halted */
41 __hc32 hwNextED; /* next ED in list */
42
43 /* rest are purely for the driver's use */
44 dma_addr_t dma; /* addr of ED */
45 struct td *dummy; /* next TD to activate */
46
47 /* host's view of schedule */
48 struct ed *ed_next; /* on schedule or rm_list */
49 struct ed *ed_prev; /* for non-interrupt EDs */
50 struct list_head td_list; /* "shadow list" of our TDs */
51 struct list_head in_use_list;
52
53 /* create --> IDLE --> OPER --> ... --> IDLE --> destroy
54 * usually: OPER --> UNLINK --> (IDLE | OPER) --> ...
55 */
56 u8 state; /* ED_{IDLE,UNLINK,OPER} */
57 #define ED_IDLE 0x00 /* NOT linked to HC */
58 #define ED_UNLINK 0x01 /* being unlinked from hc */
59 #define ED_OPER 0x02 /* IS linked to hc */
60
61 u8 type; /* PIPE_{BULK,...} */
62
63 /* periodic scheduling params (for intr and iso) */
64 u8 branch;
65 u16 interval;
66 u16 load;
67 u16 last_iso; /* iso only */
68
69 /* HC may see EDs on rm_list until next frame (frame_no == tick) */
70 u16 tick;
71
72 /* Detect TDs not added to the done queue */
73 unsigned takeback_wdh_cnt;
74 struct td *pending_td;
75 #define OKAY_TO_TAKEBACK(ohci, ed) \
76 ((int) (ohci->wdh_cnt - ed->takeback_wdh_cnt) >= 0)
77
78 } __attribute__ ((aligned(16)));
79
80 #define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */
81
82
83 /*
84 * OHCI Transfer Descriptor (TD) ... one per transfer segment
85 * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
86 * and 4.3.2 (iso)
87 */
88 struct td {
89 /* first fields are hardware-specified */
90 __hc32 hwINFO; /* transfer info bitmask */
91
92 /* hwINFO bits for both general and iso tds: */
93 #define TD_CC 0xf0000000 /* condition code */
94 #define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
95 //#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
96 #define TD_DI 0x00E00000 /* frames before interrupt */
97 #define TD_DI_SET(X) (((X) & 0x07)<< 21)
98 /* these two bits are available for definition/use by HCDs in both
99 * general and iso tds ... others are available for only one type
100 */
101 #define TD_DONE 0x00020000 /* retired to donelist */
102 #define TD_ISO 0x00010000 /* copy of ED_ISO */
103
104 /* hwINFO bits for general tds: */
105 #define TD_EC 0x0C000000 /* error count */
106 #define TD_T 0x03000000 /* data toggle state */
107 #define TD_T_DATA0 0x02000000 /* DATA0 */
108 #define TD_T_DATA1 0x03000000 /* DATA1 */
109 #define TD_T_TOGGLE 0x00000000 /* uses ED_C */
110 #define TD_DP 0x00180000 /* direction/pid */
111 #define TD_DP_SETUP 0x00000000 /* SETUP pid */
112 #define TD_DP_IN 0x00100000 /* IN pid */
113 #define TD_DP_OUT 0x00080000 /* OUT pid */
114 /* 0x00180000 rsvd */
115 #define TD_R 0x00040000 /* round: short packets OK? */
116
117 /* (no hwINFO #defines yet for iso tds) */
118
119 __hc32 hwCBP; /* Current Buffer Pointer (or 0) */
120 __hc32 hwNextTD; /* Next TD Pointer */
121 __hc32 hwBE; /* Memory Buffer End Pointer */
122
123 /* PSW is only for ISO. Only 1 PSW entry is used, but on
124 * big-endian PPC hardware that's the second entry.
125 */
126 #define MAXPSW 2
127 __hc16 hwPSW [MAXPSW];
128
129 /* rest are purely for the driver's use */
130 __u8 index;
131 struct ed *ed;
132 struct td *td_hash; /* dma-->td hashtable */
133 struct td *next_dl_td;
134 struct urb *urb;
135
136 dma_addr_t td_dma; /* addr of this TD */
137 dma_addr_t data_dma; /* addr of data it points to */
138
139 struct list_head td_list; /* "shadow list", TDs on same ED */
140 } __attribute__ ((aligned(32))); /* c/b/i need 16; only iso needs 32 */
141
142 #define TD_MASK ((u32)~0x1f) /* strip hw status in low addr bits */
143
144 /*
145 * Hardware transfer status codes -- CC from td->hwINFO or td->hwPSW
146 */
147 #define TD_CC_NOERROR 0x00
148 #define TD_CC_CRC 0x01
149 #define TD_CC_BITSTUFFING 0x02
150 #define TD_CC_DATATOGGLEM 0x03
151 #define TD_CC_STALL 0x04
152 #define TD_DEVNOTRESP 0x05
153 #define TD_PIDCHECKFAIL 0x06
154 #define TD_UNEXPECTEDPID 0x07
155 #define TD_DATAOVERRUN 0x08
156 #define TD_DATAUNDERRUN 0x09
157 /* 0x0A, 0x0B reserved for hardware */
158 #define TD_BUFFEROVERRUN 0x0C
159 #define TD_BUFFERUNDERRUN 0x0D
160 /* 0x0E, 0x0F reserved for HCD */
161 #define TD_NOTACCESSED 0x0F
162
163
164 /* map OHCI TD status codes (CC) to errno values */
165 static const int __maybe_unused cc_to_error [16] = {
166 /* No Error */ 0,
167 /* CRC Error */ -EILSEQ,
168 /* Bit Stuff */ -EPROTO,
169 /* Data Togg */ -EILSEQ,
170 /* Stall */ -EPIPE,
171 /* DevNotResp */ -ETIME,
172 /* PIDCheck */ -EPROTO,
173 /* UnExpPID */ -EPROTO,
174 /* DataOver */ -EOVERFLOW,
175 /* DataUnder */ -EREMOTEIO,
176 /* (for hw) */ -EIO,
177 /* (for hw) */ -EIO,
178 /* BufferOver */ -ECOMM,
179 /* BuffUnder */ -ENOSR,
180 /* (for HCD) */ -EALREADY,
181 /* (for HCD) */ -EALREADY
182 };
183
184
185 /*
186 * The HCCA (Host Controller Communications Area) is a 256 byte
187 * structure defined section 4.4.1 of the OHCI spec. The HC is
188 * told the base address of it. It must be 256-byte aligned.
189 */
190 struct ohci_hcca {
191 #define NUM_INTS 32
192 __hc32 int_table [NUM_INTS]; /* periodic schedule */
193
194 /*
195 * OHCI defines u16 frame_no, followed by u16 zero pad.
196 * Since some processors can't do 16 bit bus accesses,
197 * portable access must be a 32 bits wide.
198 */
199 __hc32 frame_no; /* current frame number */
200 __hc32 done_head; /* info returned for an interrupt */
201 u8 reserved_for_hc [116];
202 u8 what [4]; /* spec only identifies 252 bytes :) */
203 } __attribute__ ((aligned(256)));
204
205 /*
206 * This is the structure of the OHCI controller's memory mapped I/O region.
207 * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
208 * Layout is in section 7 (and appendix B) of the spec.
209 */
210 struct ohci_regs {
211 /* control and status registers (section 7.1) */
212 __hc32 revision;
213 __hc32 control;
214 __hc32 cmdstatus;
215 __hc32 intrstatus;
216 __hc32 intrenable;
217 __hc32 intrdisable;
218
219 /* memory pointers (section 7.2) */
220 __hc32 hcca;
221 __hc32 ed_periodcurrent;
222 __hc32 ed_controlhead;
223 __hc32 ed_controlcurrent;
224 __hc32 ed_bulkhead;
225 __hc32 ed_bulkcurrent;
226 __hc32 donehead;
227
228 /* frame counters (section 7.3) */
229 __hc32 fminterval;
230 __hc32 fmremaining;
231 __hc32 fmnumber;
232 __hc32 periodicstart;
233 __hc32 lsthresh;
234
235 /* Root hub ports (section 7.4) */
236 struct ohci_roothub_regs {
237 __hc32 a;
238 __hc32 b;
239 __hc32 status;
240 #define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports (RH_A_NDP) */
241 __hc32 portstatus [MAX_ROOT_PORTS];
242 } roothub;
243
244 /* and optional "legacy support" registers (appendix B) at 0x0100 */
245
246 } __attribute__ ((aligned(32)));
247
248
249 /* OHCI CONTROL AND STATUS REGISTER MASKS */
250
251 /*
252 * HcControl (control) register masks
253 */
254 #define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
255 #define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
256 #define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
257 #define OHCI_CTRL_CLE (1 << 4) /* control list enable */
258 #define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
259 #define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
260 #define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
261 #define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
262 #define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
263
264 /* pre-shifted values for HCFS */
265 # define OHCI_USB_RESET (0 << 6)
266 # define OHCI_USB_RESUME (1 << 6)
267 # define OHCI_USB_OPER (2 << 6)
268 # define OHCI_USB_SUSPEND (3 << 6)
269
270 /*
271 * HcCommandStatus (cmdstatus) register masks
272 */
273 #define OHCI_HCR (1 << 0) /* host controller reset */
274 #define OHCI_CLF (1 << 1) /* control list filled */
275 #define OHCI_BLF (1 << 2) /* bulk list filled */
276 #define OHCI_OCR (1 << 3) /* ownership change request */
277 #define OHCI_SOC (3 << 16) /* scheduling overrun count */
278
279 /*
280 * masks used with interrupt registers:
281 * HcInterruptStatus (intrstatus)
282 * HcInterruptEnable (intrenable)
283 * HcInterruptDisable (intrdisable)
284 */
285 #define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
286 #define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
287 #define OHCI_INTR_SF (1 << 2) /* start frame */
288 #define OHCI_INTR_RD (1 << 3) /* resume detect */
289 #define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
290 #define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
291 #define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
292 #define OHCI_INTR_OC (1 << 30) /* ownership change */
293 #define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
294
295
296 /* OHCI ROOT HUB REGISTER MASKS */
297
298 /* roothub.portstatus [i] bits */
299 #define RH_PS_CCS 0x00000001 /* current connect status */
300 #define RH_PS_PES 0x00000002 /* port enable status*/
301 #define RH_PS_PSS 0x00000004 /* port suspend status */
302 #define RH_PS_POCI 0x00000008 /* port over current indicator */
303 #define RH_PS_PRS 0x00000010 /* port reset status */
304 #define RH_PS_PPS 0x00000100 /* port power status */
305 #define RH_PS_LSDA 0x00000200 /* low speed device attached */
306 #define RH_PS_CSC 0x00010000 /* connect status change */
307 #define RH_PS_PESC 0x00020000 /* port enable status change */
308 #define RH_PS_PSSC 0x00040000 /* port suspend status change */
309 #define RH_PS_OCIC 0x00080000 /* over current indicator change */
310 #define RH_PS_PRSC 0x00100000 /* port reset status change */
311
312 /* roothub.status bits */
313 #define RH_HS_LPS 0x00000001 /* local power status */
314 #define RH_HS_OCI 0x00000002 /* over current indicator */
315 #define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
316 #define RH_HS_LPSC 0x00010000 /* local power status change */
317 #define RH_HS_OCIC 0x00020000 /* over current indicator change */
318 #define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
319
320 /* roothub.b masks */
321 #define RH_B_DR 0x0000ffff /* device removable flags */
322 #define RH_B_PPCM 0xffff0000 /* port power control mask */
323
324 /* roothub.a masks */
325 #define RH_A_NDP (0xff << 0) /* number of downstream ports */
326 #define RH_A_PSM (1 << 8) /* power switching mode */
327 #define RH_A_NPS (1 << 9) /* no power switching */
328 #define RH_A_DT (1 << 10) /* device type (mbz) */
329 #define RH_A_OCPM (1 << 11) /* over current protection mode */
330 #define RH_A_NOCP (1 << 12) /* no over current protection */
331 #define RH_A_POTPGT (0xff << 24) /* power on to power good time */
332
333
334 /* hcd-private per-urb state */
335 typedef struct urb_priv {
336 struct ed *ed;
337 u16 length; // # tds in this request
338 u16 td_cnt; // tds already serviced
339 struct list_head pending;
340 struct td *td[]; // all TDs in this request
341
342 } urb_priv_t;
343
344 #define TD_HASH_SIZE 64 /* power'o'two */
345 // sizeof (struct td) ~= 64 == 2^6 ...
346 #define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
347
348
349 /*
350 * This is the full ohci controller description
351 *
352 * Note how the "proper" USB information is just
353 * a subset of what the full implementation needs. (Linus)
354 */
355
356 enum ohci_rh_state {
357 OHCI_RH_HALTED,
358 OHCI_RH_SUSPENDED,
359 OHCI_RH_RUNNING
360 };
361
362 struct ohci_hcd {
363 spinlock_t lock;
364
365 /*
366 * I/O memory used to communicate with the HC (dma-consistent)
367 */
368 struct ohci_regs __iomem *regs;
369
370 /*
371 * main memory used to communicate with the HC (dma-consistent).
372 * hcd adds to schedule for a live hc any time, but removals finish
373 * only at the start of the next frame.
374 */
375 struct ohci_hcca *hcca;
376 dma_addr_t hcca_dma;
377
378 struct ed *ed_rm_list; /* to be removed */
379
380 struct ed *ed_bulktail; /* last in bulk list */
381 struct ed *ed_controltail; /* last in ctrl list */
382 struct ed *periodic [NUM_INTS]; /* shadow int_table */
383
384 void (*start_hnp)(struct ohci_hcd *ohci);
385
386 /*
387 * memory management for queue data structures
388 *
389 * @td_cache and @ed_cache are %NULL if &usb_hcd.localmem_pool is used.
390 */
391 struct dma_pool *td_cache;
392 struct dma_pool *ed_cache;
393 struct td *td_hash [TD_HASH_SIZE];
394 struct td *dl_start, *dl_end; /* the done list */
395 struct list_head pending;
396 struct list_head eds_in_use; /* all EDs with at least 1 TD */
397
398 /*
399 * driver state
400 */
401 enum ohci_rh_state rh_state;
402 int num_ports;
403 int load [NUM_INTS];
404 u32 hc_control; /* copy of hc control reg */
405 unsigned long next_statechange; /* suspend/resume */
406 u32 fminterval; /* saved register */
407 unsigned autostop:1; /* rh auto stopping/stopped */
408 unsigned working:1;
409 unsigned restart_work:1;
410
411 unsigned long flags; /* for HC bugs */
412 #define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */
413 #define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */
414 #define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */
415 #define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */
416 #define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */
417 #define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/
418 #define OHCI_QUIRK_NEC 0x40 /* lost interrupts */
419 #define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */
420 #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */
421 #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/
422 #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */
423 #define OHCI_QUIRK_GLOBAL_SUSPEND 0x800 /* must suspend ports */
424 #define OHCI_QUIRK_QEMU 0x1000 /* relax timing expectations */
425
426 // there are also chip quirks/bugs in init logic
427
428 unsigned prev_frame_no;
429 unsigned wdh_cnt, prev_wdh_cnt;
430 u32 prev_donehead;
431 struct timer_list io_watchdog;
432
433 struct work_struct nec_work; /* Worker for NEC quirk */
434
435 struct dentry *debug_dir;
436
437 /* platform-specific data -- must come last */
438 unsigned long priv[] __aligned(sizeof(s64));
439
440 };
441
442 #ifdef CONFIG_USB_PCI
quirk_nec(struct ohci_hcd * ohci)443 static inline int quirk_nec(struct ohci_hcd *ohci)
444 {
445 return ohci->flags & OHCI_QUIRK_NEC;
446 }
quirk_zfmicro(struct ohci_hcd * ohci)447 static inline int quirk_zfmicro(struct ohci_hcd *ohci)
448 {
449 return ohci->flags & OHCI_QUIRK_ZFMICRO;
450 }
quirk_amdiso(struct ohci_hcd * ohci)451 static inline int quirk_amdiso(struct ohci_hcd *ohci)
452 {
453 return ohci->flags & OHCI_QUIRK_AMD_PLL;
454 }
quirk_amdprefetch(struct ohci_hcd * ohci)455 static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
456 {
457 return ohci->flags & OHCI_QUIRK_AMD_PREFETCH;
458 }
459 #else
quirk_nec(struct ohci_hcd * ohci)460 static inline int quirk_nec(struct ohci_hcd *ohci)
461 {
462 return 0;
463 }
quirk_zfmicro(struct ohci_hcd * ohci)464 static inline int quirk_zfmicro(struct ohci_hcd *ohci)
465 {
466 return 0;
467 }
quirk_amdiso(struct ohci_hcd * ohci)468 static inline int quirk_amdiso(struct ohci_hcd *ohci)
469 {
470 return 0;
471 }
quirk_amdprefetch(struct ohci_hcd * ohci)472 static inline int quirk_amdprefetch(struct ohci_hcd *ohci)
473 {
474 return 0;
475 }
476 #endif
477
478 /* convert between an hcd pointer and the corresponding ohci_hcd */
hcd_to_ohci(struct usb_hcd * hcd)479 static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd)
480 {
481 return (struct ohci_hcd *) (hcd->hcd_priv);
482 }
ohci_to_hcd(const struct ohci_hcd * ohci)483 static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci)
484 {
485 return container_of ((void *) ohci, struct usb_hcd, hcd_priv);
486 }
487
488 /*-------------------------------------------------------------------------*/
489
490 #define ohci_dbg(ohci, fmt, args...) \
491 dev_dbg (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
492 #define ohci_err(ohci, fmt, args...) \
493 dev_err (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
494 #define ohci_info(ohci, fmt, args...) \
495 dev_info (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
496 #define ohci_warn(ohci, fmt, args...) \
497 dev_warn (ohci_to_hcd(ohci)->self.controller , fmt , ## args )
498
499 /*-------------------------------------------------------------------------*/
500
501 /*
502 * While most USB host controllers implement their registers and
503 * in-memory communication descriptors in little-endian format,
504 * a minority (notably the IBM STB04XXX and the Motorola MPC5200
505 * processors) implement them in big endian format.
506 *
507 * In addition some more exotic implementations like the Toshiba
508 * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
509 * they have a different endianness for registers vs. in-memory
510 * descriptors.
511 *
512 * This attempts to support either format at compile time without a
513 * runtime penalty, or both formats with the additional overhead
514 * of checking a flag bit.
515 *
516 * That leads to some tricky Kconfig rules howevber. There are
517 * different defaults based on some arch/ppc platforms, though
518 * the basic rules are:
519 *
520 * Controller type Kconfig options needed
521 * --------------- ----------------------
522 * little endian CONFIG_USB_OHCI_LITTLE_ENDIAN
523 *
524 * fully big endian CONFIG_USB_OHCI_BIG_ENDIAN_DESC _and_
525 * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
526 *
527 * mixed endian CONFIG_USB_OHCI_LITTLE_ENDIAN _and_
528 * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
529 *
530 * (If you have a mixed endian controller, you -must- also define
531 * CONFIG_USB_OHCI_LITTLE_ENDIAN or things will not work when building
532 * both your mixed endian and a fully big endian controller support in
533 * the same kernel image).
534 */
535
536 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
537 #ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
538 #define big_endian_desc(ohci) (ohci->flags & OHCI_QUIRK_BE_DESC)
539 #else
540 #define big_endian_desc(ohci) 1 /* only big endian */
541 #endif
542 #else
543 #define big_endian_desc(ohci) 0 /* only little endian */
544 #endif
545
546 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
547 #ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
548 #define big_endian_mmio(ohci) (ohci->flags & OHCI_QUIRK_BE_MMIO)
549 #else
550 #define big_endian_mmio(ohci) 1 /* only big endian */
551 #endif
552 #else
553 #define big_endian_mmio(ohci) 0 /* only little endian */
554 #endif
555
556 /*
557 * Big-endian read/write functions are arch-specific.
558 * Other arches can be added if/when they're needed.
559 *
560 */
_ohci_readl(const struct ohci_hcd * ohci,__hc32 __iomem * regs)561 static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
562 __hc32 __iomem * regs)
563 {
564 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
565 return big_endian_mmio(ohci) ?
566 readl_be (regs) :
567 readl (regs);
568 #else
569 return readl (regs);
570 #endif
571 }
572
_ohci_writel(const struct ohci_hcd * ohci,const unsigned int val,__hc32 __iomem * regs)573 static inline void _ohci_writel (const struct ohci_hcd *ohci,
574 const unsigned int val, __hc32 __iomem *regs)
575 {
576 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
577 big_endian_mmio(ohci) ?
578 writel_be (val, regs) :
579 writel (val, regs);
580 #else
581 writel (val, regs);
582 #endif
583 }
584
585 #define ohci_readl(o,r) _ohci_readl(o,r)
586 #define ohci_writel(o,v,r) _ohci_writel(o,v,r)
587
588
589 /*-------------------------------------------------------------------------*/
590
591 /* cpu to ohci */
cpu_to_hc16(const struct ohci_hcd * ohci,const u16 x)592 static inline __hc16 cpu_to_hc16 (const struct ohci_hcd *ohci, const u16 x)
593 {
594 return big_endian_desc(ohci) ?
595 (__force __hc16)cpu_to_be16(x) :
596 (__force __hc16)cpu_to_le16(x);
597 }
598
cpu_to_hc16p(const struct ohci_hcd * ohci,const u16 * x)599 static inline __hc16 cpu_to_hc16p (const struct ohci_hcd *ohci, const u16 *x)
600 {
601 return big_endian_desc(ohci) ?
602 cpu_to_be16p(x) :
603 cpu_to_le16p(x);
604 }
605
cpu_to_hc32(const struct ohci_hcd * ohci,const u32 x)606 static inline __hc32 cpu_to_hc32 (const struct ohci_hcd *ohci, const u32 x)
607 {
608 return big_endian_desc(ohci) ?
609 (__force __hc32)cpu_to_be32(x) :
610 (__force __hc32)cpu_to_le32(x);
611 }
612
cpu_to_hc32p(const struct ohci_hcd * ohci,const u32 * x)613 static inline __hc32 cpu_to_hc32p (const struct ohci_hcd *ohci, const u32 *x)
614 {
615 return big_endian_desc(ohci) ?
616 cpu_to_be32p(x) :
617 cpu_to_le32p(x);
618 }
619
620 /* ohci to cpu */
hc16_to_cpu(const struct ohci_hcd * ohci,const __hc16 x)621 static inline u16 hc16_to_cpu (const struct ohci_hcd *ohci, const __hc16 x)
622 {
623 return big_endian_desc(ohci) ?
624 be16_to_cpu((__force __be16)x) :
625 le16_to_cpu((__force __le16)x);
626 }
627
hc16_to_cpup(const struct ohci_hcd * ohci,const __hc16 * x)628 static inline u16 hc16_to_cpup (const struct ohci_hcd *ohci, const __hc16 *x)
629 {
630 return big_endian_desc(ohci) ?
631 be16_to_cpup((__force __be16 *)x) :
632 le16_to_cpup((__force __le16 *)x);
633 }
634
hc32_to_cpu(const struct ohci_hcd * ohci,const __hc32 x)635 static inline u32 hc32_to_cpu (const struct ohci_hcd *ohci, const __hc32 x)
636 {
637 return big_endian_desc(ohci) ?
638 be32_to_cpu((__force __be32)x) :
639 le32_to_cpu((__force __le32)x);
640 }
641
hc32_to_cpup(const struct ohci_hcd * ohci,const __hc32 * x)642 static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
643 {
644 return big_endian_desc(ohci) ?
645 be32_to_cpup((__force __be32 *)x) :
646 le32_to_cpup((__force __le32 *)x);
647 }
648
649 /*-------------------------------------------------------------------------*/
650
651 /*
652 * The HCCA frame number is 16 bits, but is accessed as 32 bits since not all
653 * hardware handles 16 bit reads. Depending on the SoC implementation, the
654 * frame number can wind up in either bits [31:16] (default) or
655 * [15:0] (OHCI_QUIRK_FRAME_NO) on big endian hosts.
656 *
657 * Somewhat similarly, the 16-bit PSW fields in a transfer descriptor are
658 * reordered on BE.
659 */
660
ohci_frame_no(const struct ohci_hcd * ohci)661 static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
662 {
663 u32 tmp;
664 if (big_endian_desc(ohci)) {
665 tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no);
666 if (!(ohci->flags & OHCI_QUIRK_FRAME_NO))
667 tmp >>= 16;
668 } else
669 tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no);
670
671 return (u16)tmp;
672 }
673
ohci_hwPSWp(const struct ohci_hcd * ohci,const struct td * td,int index)674 static inline __hc16 *ohci_hwPSWp(const struct ohci_hcd *ohci,
675 const struct td *td, int index)
676 {
677 return (__hc16 *)(big_endian_desc(ohci) ?
678 &td->hwPSW[index ^ 1] : &td->hwPSW[index]);
679 }
680
ohci_hwPSW(const struct ohci_hcd * ohci,const struct td * td,int index)681 static inline u16 ohci_hwPSW(const struct ohci_hcd *ohci,
682 const struct td *td, int index)
683 {
684 return hc16_to_cpup(ohci, ohci_hwPSWp(ohci, td, index));
685 }
686
687 /*-------------------------------------------------------------------------*/
688
689 #define FI 0x2edf /* 12000 bits per frame (-1) */
690 #define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7))
691 #define FIT (1 << 31)
692 #define LSTHRESH 0x628 /* lowspeed bit threshold */
693
periodic_reinit(struct ohci_hcd * ohci)694 static inline void periodic_reinit (struct ohci_hcd *ohci)
695 {
696 u32 fi = ohci->fminterval & 0x03fff;
697 u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT;
698
699 ohci_writel (ohci, (fit ^ FIT) | ohci->fminterval,
700 &ohci->regs->fminterval);
701 ohci_writel (ohci, ((9 * fi) / 10) & 0x3fff,
702 &ohci->regs->periodicstart);
703 }
704
705 /* AMD-756 (D2 rev) reports corrupt register contents in some cases.
706 * The erratum (#4) description is incorrect. AMD's workaround waits
707 * till some bits (mostly reserved) are clear; ok for all revs.
708 */
709 #define read_roothub(hc, register, mask) ({ \
710 u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \
711 if (temp == -1) \
712 hc->rh_state = OHCI_RH_HALTED; \
713 else if (hc->flags & OHCI_QUIRK_AMD756) \
714 while (temp & mask) \
715 temp = ohci_readl (hc, &hc->regs->roothub.register); \
716 temp; })
717
roothub_a(struct ohci_hcd * hc)718 static inline u32 roothub_a (struct ohci_hcd *hc)
719 { return read_roothub (hc, a, 0xfc0fe000); }
roothub_b(struct ohci_hcd * hc)720 static inline u32 roothub_b (struct ohci_hcd *hc)
721 { return ohci_readl (hc, &hc->regs->roothub.b); }
roothub_status(struct ohci_hcd * hc)722 static inline u32 roothub_status (struct ohci_hcd *hc)
723 { return ohci_readl (hc, &hc->regs->roothub.status); }
roothub_portstatus(struct ohci_hcd * hc,int i)724 static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i)
725 { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
726
727 /* Declarations of things exported for use by ohci platform drivers */
728
729 struct ohci_driver_overrides {
730 const char *product_desc;
731 size_t extra_priv_size;
732 int (*reset)(struct usb_hcd *hcd);
733 };
734
735 extern void ohci_init_driver(struct hc_driver *drv,
736 const struct ohci_driver_overrides *over);
737 extern int ohci_restart(struct ohci_hcd *ohci);
738 extern int ohci_setup(struct usb_hcd *hcd);
739 extern int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup);
740 extern int ohci_resume(struct usb_hcd *hcd, bool hibernated);
741 extern int ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
742 u16 wIndex, char *buf, u16 wLength);
743 extern int ohci_hub_status_data(struct usb_hcd *hcd, char *buf);
744