1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * thmc50.c - Part of lm_sensors, Linux kernel modules for hardware
4 * monitoring
5 * Copyright (C) 2007 Krzysztof Helt <krzysztof.h1@wp.pl>
6 * Based on 2.4 driver by Frodo Looijaard <frodol@dds.nl> and
7 * Philip Edelbrock <phil@netroedge.com>
8 */
9
10 #include <linux/module.h>
11 #include <linux/init.h>
12 #include <linux/slab.h>
13 #include <linux/i2c.h>
14 #include <linux/hwmon.h>
15 #include <linux/hwmon-sysfs.h>
16 #include <linux/err.h>
17 #include <linux/mutex.h>
18 #include <linux/jiffies.h>
19
20 MODULE_LICENSE("GPL");
21
22 /* Addresses to scan */
23 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
24
25 /* Insmod parameters */
26 enum chips { thmc50, adm1022 };
27
28 static unsigned short adm1022_temp3[16];
29 static unsigned int adm1022_temp3_num;
30 module_param_array(adm1022_temp3, ushort, &adm1022_temp3_num, 0);
31 MODULE_PARM_DESC(adm1022_temp3,
32 "List of adapter,address pairs to enable 3rd temperature (ADM1022 only)");
33
34 /* Many THMC50 constants specified below */
35
36 /* The THMC50 registers */
37 #define THMC50_REG_CONF 0x40
38 #define THMC50_REG_COMPANY_ID 0x3E
39 #define THMC50_REG_DIE_CODE 0x3F
40 #define THMC50_REG_ANALOG_OUT 0x19
41 /*
42 * The mirror status register cannot be used as
43 * reading it does not clear alarms.
44 */
45 #define THMC50_REG_INTR 0x41
46
47 static const u8 THMC50_REG_TEMP[] = { 0x27, 0x26, 0x20 };
48 static const u8 THMC50_REG_TEMP_MIN[] = { 0x3A, 0x38, 0x2C };
49 static const u8 THMC50_REG_TEMP_MAX[] = { 0x39, 0x37, 0x2B };
50 static const u8 THMC50_REG_TEMP_CRITICAL[] = { 0x13, 0x14, 0x14 };
51 static const u8 THMC50_REG_TEMP_DEFAULT[] = { 0x17, 0x18, 0x18 };
52
53 #define THMC50_REG_CONF_nFANOFF 0x20
54 #define THMC50_REG_CONF_PROGRAMMED 0x08
55
56 /* Each client has this additional data */
57 struct thmc50_data {
58 struct i2c_client *client;
59 const struct attribute_group *groups[3];
60
61 struct mutex update_lock;
62 enum chips type;
63 unsigned long last_updated; /* In jiffies */
64 char has_temp3; /* !=0 if it is ADM1022 in temp3 mode */
65 bool valid; /* true if following fields are valid */
66
67 /* Register values */
68 s8 temp_input[3];
69 s8 temp_max[3];
70 s8 temp_min[3];
71 s8 temp_critical[3];
72 u8 analog_out;
73 u8 alarms;
74 };
75
thmc50_update_device(struct device * dev)76 static struct thmc50_data *thmc50_update_device(struct device *dev)
77 {
78 struct thmc50_data *data = dev_get_drvdata(dev);
79 struct i2c_client *client = data->client;
80 int timeout = HZ / 5 + (data->type == thmc50 ? HZ : 0);
81
82 mutex_lock(&data->update_lock);
83
84 if (time_after(jiffies, data->last_updated + timeout)
85 || !data->valid) {
86
87 int temps = data->has_temp3 ? 3 : 2;
88 int i;
89 int prog = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
90
91 prog &= THMC50_REG_CONF_PROGRAMMED;
92
93 for (i = 0; i < temps; i++) {
94 data->temp_input[i] = i2c_smbus_read_byte_data(client,
95 THMC50_REG_TEMP[i]);
96 data->temp_max[i] = i2c_smbus_read_byte_data(client,
97 THMC50_REG_TEMP_MAX[i]);
98 data->temp_min[i] = i2c_smbus_read_byte_data(client,
99 THMC50_REG_TEMP_MIN[i]);
100 data->temp_critical[i] =
101 i2c_smbus_read_byte_data(client,
102 prog ? THMC50_REG_TEMP_CRITICAL[i]
103 : THMC50_REG_TEMP_DEFAULT[i]);
104 }
105 data->analog_out =
106 i2c_smbus_read_byte_data(client, THMC50_REG_ANALOG_OUT);
107 data->alarms =
108 i2c_smbus_read_byte_data(client, THMC50_REG_INTR);
109 data->last_updated = jiffies;
110 data->valid = true;
111 }
112
113 mutex_unlock(&data->update_lock);
114
115 return data;
116 }
117
analog_out_show(struct device * dev,struct device_attribute * attr,char * buf)118 static ssize_t analog_out_show(struct device *dev,
119 struct device_attribute *attr, char *buf)
120 {
121 struct thmc50_data *data = thmc50_update_device(dev);
122 return sprintf(buf, "%d\n", data->analog_out);
123 }
124
analog_out_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)125 static ssize_t analog_out_store(struct device *dev,
126 struct device_attribute *attr,
127 const char *buf, size_t count)
128 {
129 struct thmc50_data *data = dev_get_drvdata(dev);
130 struct i2c_client *client = data->client;
131 int config;
132 unsigned long tmp;
133 int err;
134
135 err = kstrtoul(buf, 10, &tmp);
136 if (err)
137 return err;
138
139 mutex_lock(&data->update_lock);
140 data->analog_out = clamp_val(tmp, 0, 255);
141 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
142 data->analog_out);
143
144 config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
145 if (data->analog_out == 0)
146 config &= ~THMC50_REG_CONF_nFANOFF;
147 else
148 config |= THMC50_REG_CONF_nFANOFF;
149 i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
150
151 mutex_unlock(&data->update_lock);
152 return count;
153 }
154
155 /* There is only one PWM mode = DC */
pwm_mode_show(struct device * dev,struct device_attribute * attr,char * buf)156 static ssize_t pwm_mode_show(struct device *dev,
157 struct device_attribute *attr, char *buf)
158 {
159 return sprintf(buf, "0\n");
160 }
161
162 /* Temperatures */
temp_show(struct device * dev,struct device_attribute * attr,char * buf)163 static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
164 char *buf)
165 {
166 int nr = to_sensor_dev_attr(attr)->index;
167 struct thmc50_data *data = thmc50_update_device(dev);
168 return sprintf(buf, "%d\n", data->temp_input[nr] * 1000);
169 }
170
temp_min_show(struct device * dev,struct device_attribute * attr,char * buf)171 static ssize_t temp_min_show(struct device *dev,
172 struct device_attribute *attr, char *buf)
173 {
174 int nr = to_sensor_dev_attr(attr)->index;
175 struct thmc50_data *data = thmc50_update_device(dev);
176 return sprintf(buf, "%d\n", data->temp_min[nr] * 1000);
177 }
178
temp_min_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)179 static ssize_t temp_min_store(struct device *dev,
180 struct device_attribute *attr, const char *buf,
181 size_t count)
182 {
183 int nr = to_sensor_dev_attr(attr)->index;
184 struct thmc50_data *data = dev_get_drvdata(dev);
185 struct i2c_client *client = data->client;
186 long val;
187 int err;
188
189 err = kstrtol(buf, 10, &val);
190 if (err)
191 return err;
192
193 mutex_lock(&data->update_lock);
194 data->temp_min[nr] = clamp_val(val / 1000, -128, 127);
195 i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MIN[nr],
196 data->temp_min[nr]);
197 mutex_unlock(&data->update_lock);
198 return count;
199 }
200
temp_max_show(struct device * dev,struct device_attribute * attr,char * buf)201 static ssize_t temp_max_show(struct device *dev,
202 struct device_attribute *attr, char *buf)
203 {
204 int nr = to_sensor_dev_attr(attr)->index;
205 struct thmc50_data *data = thmc50_update_device(dev);
206 return sprintf(buf, "%d\n", data->temp_max[nr] * 1000);
207 }
208
temp_max_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)209 static ssize_t temp_max_store(struct device *dev,
210 struct device_attribute *attr, const char *buf,
211 size_t count)
212 {
213 int nr = to_sensor_dev_attr(attr)->index;
214 struct thmc50_data *data = dev_get_drvdata(dev);
215 struct i2c_client *client = data->client;
216 long val;
217 int err;
218
219 err = kstrtol(buf, 10, &val);
220 if (err)
221 return err;
222
223 mutex_lock(&data->update_lock);
224 data->temp_max[nr] = clamp_val(val / 1000, -128, 127);
225 i2c_smbus_write_byte_data(client, THMC50_REG_TEMP_MAX[nr],
226 data->temp_max[nr]);
227 mutex_unlock(&data->update_lock);
228 return count;
229 }
230
temp_critical_show(struct device * dev,struct device_attribute * attr,char * buf)231 static ssize_t temp_critical_show(struct device *dev,
232 struct device_attribute *attr, char *buf)
233 {
234 int nr = to_sensor_dev_attr(attr)->index;
235 struct thmc50_data *data = thmc50_update_device(dev);
236 return sprintf(buf, "%d\n", data->temp_critical[nr] * 1000);
237 }
238
alarm_show(struct device * dev,struct device_attribute * attr,char * buf)239 static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
240 char *buf)
241 {
242 int index = to_sensor_dev_attr(attr)->index;
243 struct thmc50_data *data = thmc50_update_device(dev);
244
245 return sprintf(buf, "%u\n", (data->alarms >> index) & 1);
246 }
247
248 static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
249 static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0);
250 static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
251 static SENSOR_DEVICE_ATTR_RO(temp1_crit, temp_critical, 0);
252 static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
253 static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1);
254 static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
255 static SENSOR_DEVICE_ATTR_RO(temp2_crit, temp_critical, 1);
256 static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
257 static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2);
258 static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2);
259 static SENSOR_DEVICE_ATTR_RO(temp3_crit, temp_critical, 2);
260
261 static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 0);
262 static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 5);
263 static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 1);
264 static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 7);
265 static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 2);
266
267 static SENSOR_DEVICE_ATTR_RW(pwm1, analog_out, 0);
268 static SENSOR_DEVICE_ATTR_RO(pwm1_mode, pwm_mode, 0);
269
270 static struct attribute *thmc50_attributes[] = {
271 &sensor_dev_attr_temp1_max.dev_attr.attr,
272 &sensor_dev_attr_temp1_min.dev_attr.attr,
273 &sensor_dev_attr_temp1_input.dev_attr.attr,
274 &sensor_dev_attr_temp1_crit.dev_attr.attr,
275 &sensor_dev_attr_temp1_alarm.dev_attr.attr,
276 &sensor_dev_attr_temp2_max.dev_attr.attr,
277 &sensor_dev_attr_temp2_min.dev_attr.attr,
278 &sensor_dev_attr_temp2_input.dev_attr.attr,
279 &sensor_dev_attr_temp2_crit.dev_attr.attr,
280 &sensor_dev_attr_temp2_alarm.dev_attr.attr,
281 &sensor_dev_attr_temp2_fault.dev_attr.attr,
282 &sensor_dev_attr_pwm1.dev_attr.attr,
283 &sensor_dev_attr_pwm1_mode.dev_attr.attr,
284 NULL
285 };
286
287 static const struct attribute_group thmc50_group = {
288 .attrs = thmc50_attributes,
289 };
290
291 /* for ADM1022 3rd temperature mode */
292 static struct attribute *temp3_attributes[] = {
293 &sensor_dev_attr_temp3_max.dev_attr.attr,
294 &sensor_dev_attr_temp3_min.dev_attr.attr,
295 &sensor_dev_attr_temp3_input.dev_attr.attr,
296 &sensor_dev_attr_temp3_crit.dev_attr.attr,
297 &sensor_dev_attr_temp3_alarm.dev_attr.attr,
298 &sensor_dev_attr_temp3_fault.dev_attr.attr,
299 NULL
300 };
301
302 static const struct attribute_group temp3_group = {
303 .attrs = temp3_attributes,
304 };
305
306 /* Return 0 if detection is successful, -ENODEV otherwise */
thmc50_detect(struct i2c_client * client,struct i2c_board_info * info)307 static int thmc50_detect(struct i2c_client *client,
308 struct i2c_board_info *info)
309 {
310 unsigned company;
311 unsigned revision;
312 unsigned config;
313 struct i2c_adapter *adapter = client->adapter;
314 const char *type_name;
315
316 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
317 pr_debug("thmc50: detect failed, smbus byte data not supported!\n");
318 return -ENODEV;
319 }
320
321 pr_debug("thmc50: Probing for THMC50 at 0x%2X on bus %d\n",
322 client->addr, i2c_adapter_id(client->adapter));
323
324 company = i2c_smbus_read_byte_data(client, THMC50_REG_COMPANY_ID);
325 revision = i2c_smbus_read_byte_data(client, THMC50_REG_DIE_CODE);
326 config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
327 if (revision < 0xc0 || (config & 0x10))
328 return -ENODEV;
329
330 if (company == 0x41) {
331 int id = i2c_adapter_id(client->adapter);
332 int i;
333
334 type_name = "adm1022";
335 for (i = 0; i + 1 < adm1022_temp3_num; i += 2)
336 if (adm1022_temp3[i] == id &&
337 adm1022_temp3[i + 1] == client->addr) {
338 /* enable 2nd remote temp */
339 config |= (1 << 7);
340 i2c_smbus_write_byte_data(client,
341 THMC50_REG_CONF,
342 config);
343 break;
344 }
345 } else if (company == 0x49) {
346 type_name = "thmc50";
347 } else {
348 pr_debug("thmc50: Detection of THMC50/ADM1022 failed\n");
349 return -ENODEV;
350 }
351
352 pr_debug("thmc50: Detected %s (version %x, revision %x)\n",
353 type_name, (revision >> 4) - 0xc, revision & 0xf);
354
355 strscpy(info->type, type_name, I2C_NAME_SIZE);
356
357 return 0;
358 }
359
thmc50_init_client(struct thmc50_data * data)360 static void thmc50_init_client(struct thmc50_data *data)
361 {
362 struct i2c_client *client = data->client;
363 int config;
364
365 data->analog_out = i2c_smbus_read_byte_data(client,
366 THMC50_REG_ANALOG_OUT);
367 /* set up to at least 1 */
368 if (data->analog_out == 0) {
369 data->analog_out = 1;
370 i2c_smbus_write_byte_data(client, THMC50_REG_ANALOG_OUT,
371 data->analog_out);
372 }
373 config = i2c_smbus_read_byte_data(client, THMC50_REG_CONF);
374 config |= 0x1; /* start the chip if it is in standby mode */
375 if (data->type == adm1022 && (config & (1 << 7)))
376 data->has_temp3 = 1;
377 i2c_smbus_write_byte_data(client, THMC50_REG_CONF, config);
378 }
379
380 static const struct i2c_device_id thmc50_id[];
381
thmc50_probe(struct i2c_client * client)382 static int thmc50_probe(struct i2c_client *client)
383 {
384 struct device *dev = &client->dev;
385 struct thmc50_data *data;
386 struct device *hwmon_dev;
387 int idx = 0;
388
389 data = devm_kzalloc(dev, sizeof(struct thmc50_data), GFP_KERNEL);
390 if (!data)
391 return -ENOMEM;
392
393 data->client = client;
394 data->type = i2c_match_id(thmc50_id, client)->driver_data;
395 mutex_init(&data->update_lock);
396
397 thmc50_init_client(data);
398
399 /* sysfs hooks */
400 data->groups[idx++] = &thmc50_group;
401
402 /* Register additional ADM1022 sysfs hooks */
403 if (data->has_temp3)
404 data->groups[idx++] = &temp3_group;
405
406 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
407 data, data->groups);
408 return PTR_ERR_OR_ZERO(hwmon_dev);
409 }
410
411 static const struct i2c_device_id thmc50_id[] = {
412 { "adm1022", adm1022 },
413 { "thmc50", thmc50 },
414 { }
415 };
416 MODULE_DEVICE_TABLE(i2c, thmc50_id);
417
418 static struct i2c_driver thmc50_driver = {
419 .class = I2C_CLASS_HWMON,
420 .driver = {
421 .name = "thmc50",
422 },
423 .probe = thmc50_probe,
424 .id_table = thmc50_id,
425 .detect = thmc50_detect,
426 .address_list = normal_i2c,
427 };
428
429 module_i2c_driver(thmc50_driver);
430
431 MODULE_AUTHOR("Krzysztof Helt <krzysztof.h1@wp.pl>");
432 MODULE_DESCRIPTION("THMC50 driver");
433