1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * ether.c -- Ethernet gadget driver, with CDC and non-CDC options
4 *
5 * Copyright (C) 2003-2005,2008 David Brownell
6 * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
7 * Copyright (C) 2008 Nokia Corporation
8 */
9
10 /* #define VERBOSE_DEBUG */
11
12 #include <linux/kernel.h>
13 #include <linux/netdevice.h>
14
15 #if defined USB_ETH_RNDIS
16 # undef USB_ETH_RNDIS
17 #endif
18 #ifdef CONFIG_USB_ETH_RNDIS
19 # define USB_ETH_RNDIS y
20 #endif
21
22 #include "u_ether.h"
23
24
25 /*
26 * Ethernet gadget driver -- with CDC and non-CDC options
27 * Builds on hardware support for a full duplex link.
28 *
29 * CDC Ethernet is the standard USB solution for sending Ethernet frames
30 * using USB. Real hardware tends to use the same framing protocol but look
31 * different for control features. This driver strongly prefers to use
32 * this USB-IF standard as its open-systems interoperability solution;
33 * most host side USB stacks (except from Microsoft) support it.
34 *
35 * This is sometimes called "CDC ECM" (Ethernet Control Model) to support
36 * TLA-soup. "CDC ACM" (Abstract Control Model) is for modems, and a new
37 * "CDC EEM" (Ethernet Emulation Model) is starting to spread.
38 *
39 * There's some hardware that can't talk CDC ECM. We make that hardware
40 * implement a "minimalist" vendor-agnostic CDC core: same framing, but
41 * link-level setup only requires activating the configuration. Only the
42 * endpoint descriptors, and product/vendor IDs, are relevant; no control
43 * operations are available. Linux supports it, but other host operating
44 * systems may not. (This is a subset of CDC Ethernet.)
45 *
46 * It turns out that if you add a few descriptors to that "CDC Subset",
47 * (Windows) host side drivers from MCCI can treat it as one submode of
48 * a proprietary scheme called "SAFE" ... without needing to know about
49 * specific product/vendor IDs. So we do that, making it easier to use
50 * those MS-Windows drivers. Those added descriptors make it resemble a
51 * CDC MDLM device, but they don't change device behavior at all. (See
52 * MCCI Engineering report 950198 "SAFE Networking Functions".)
53 *
54 * A third option is also in use. Rather than CDC Ethernet, or something
55 * simpler, Microsoft pushes their own approach: RNDIS. The published
56 * RNDIS specs are ambiguous and appear to be incomplete, and are also
57 * needlessly complex. They borrow more from CDC ACM than CDC ECM.
58 */
59
60 #define DRIVER_DESC "Ethernet Gadget"
61 #define DRIVER_VERSION "Memorial Day 2008"
62
63 #ifdef USB_ETH_RNDIS
64 #define PREFIX "RNDIS/"
65 #else
66 #define PREFIX ""
67 #endif
68
69 /*
70 * This driver aims for interoperability by using CDC ECM unless
71 *
72 * can_support_ecm()
73 *
74 * returns false, in which case it supports the CDC Subset. By default,
75 * that returns true; most hardware has no problems with CDC ECM, that's
76 * a good default. Previous versions of this driver had no default; this
77 * version changes that, removing overhead for new controller support.
78 *
79 * IF YOUR HARDWARE CAN'T SUPPORT CDC ECM, UPDATE THAT ROUTINE!
80 */
81
has_rndis(void)82 static inline bool has_rndis(void)
83 {
84 #ifdef USB_ETH_RNDIS
85 return true;
86 #else
87 return false;
88 #endif
89 }
90
91 #include <linux/module.h>
92
93 #include "u_ecm.h"
94 #include "u_gether.h"
95 #ifdef USB_ETH_RNDIS
96 #include "u_rndis.h"
97 #include "rndis.h"
98 #else
99 #define rndis_borrow_net(...) do {} while (0)
100 #endif
101 #include "u_eem.h"
102
103 /*-------------------------------------------------------------------------*/
104 USB_GADGET_COMPOSITE_OPTIONS();
105
106 USB_ETHERNET_MODULE_PARAMETERS();
107
108 /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
109 * Instead: allocate your own, using normal USB-IF procedures.
110 */
111
112 /* Thanks to NetChip Technologies for donating this product ID.
113 * It's for devices with only CDC Ethernet configurations.
114 */
115 #define CDC_VENDOR_NUM 0x0525 /* NetChip */
116 #define CDC_PRODUCT_NUM 0xa4a1 /* Linux-USB Ethernet Gadget */
117
118 /* For hardware that can't talk CDC, we use the same vendor ID that
119 * ARM Linux has used for ethernet-over-usb, both with sa1100 and
120 * with pxa250. We're protocol-compatible, if the host-side drivers
121 * use the endpoint descriptors. bcdDevice (version) is nonzero, so
122 * drivers that need to hard-wire endpoint numbers have a hook.
123 *
124 * The protocol is a minimal subset of CDC Ether, which works on any bulk
125 * hardware that's not deeply broken ... even on hardware that can't talk
126 * RNDIS (like SA-1100, with no interrupt endpoint, or anything that
127 * doesn't handle control-OUT).
128 */
129 #define SIMPLE_VENDOR_NUM 0x049f
130 #define SIMPLE_PRODUCT_NUM 0x505a
131
132 /* For hardware that can talk RNDIS and either of the above protocols,
133 * use this ID ... the windows INF files will know it. Unless it's
134 * used with CDC Ethernet, Linux 2.4 hosts will need updates to choose
135 * the non-RNDIS configuration.
136 */
137 #define RNDIS_VENDOR_NUM 0x0525 /* NetChip */
138 #define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */
139
140 /* For EEM gadgets */
141 #define EEM_VENDOR_NUM 0x1d6b /* Linux Foundation */
142 #define EEM_PRODUCT_NUM 0x0102 /* EEM Gadget */
143
144 /*-------------------------------------------------------------------------*/
145
146 static struct usb_device_descriptor device_desc = {
147 .bLength = sizeof device_desc,
148 .bDescriptorType = USB_DT_DEVICE,
149
150 /* .bcdUSB = DYNAMIC */
151
152 .bDeviceClass = USB_CLASS_COMM,
153 .bDeviceSubClass = 0,
154 .bDeviceProtocol = 0,
155 /* .bMaxPacketSize0 = f(hardware) */
156
157 /* Vendor and product id defaults change according to what configs
158 * we support. (As does bNumConfigurations.) These values can
159 * also be overridden by module parameters.
160 */
161 .idVendor = cpu_to_le16 (CDC_VENDOR_NUM),
162 .idProduct = cpu_to_le16 (CDC_PRODUCT_NUM),
163 /* .bcdDevice = f(hardware) */
164 /* .iManufacturer = DYNAMIC */
165 /* .iProduct = DYNAMIC */
166 /* NO SERIAL NUMBER */
167 .bNumConfigurations = 1,
168 };
169
170 static const struct usb_descriptor_header *otg_desc[2];
171
172 static struct usb_string strings_dev[] = {
173 [USB_GADGET_MANUFACTURER_IDX].s = "",
174 [USB_GADGET_PRODUCT_IDX].s = PREFIX DRIVER_DESC,
175 [USB_GADGET_SERIAL_IDX].s = "",
176 { } /* end of list */
177 };
178
179 static struct usb_gadget_strings stringtab_dev = {
180 .language = 0x0409, /* en-us */
181 .strings = strings_dev,
182 };
183
184 static struct usb_gadget_strings *dev_strings[] = {
185 &stringtab_dev,
186 NULL,
187 };
188
189 static struct usb_function_instance *fi_ecm;
190 static struct usb_function *f_ecm;
191
192 static struct usb_function_instance *fi_eem;
193 static struct usb_function *f_eem;
194
195 static struct usb_function_instance *fi_geth;
196 static struct usb_function *f_geth;
197
198 static struct usb_function_instance *fi_rndis;
199 static struct usb_function *f_rndis;
200
201 /*-------------------------------------------------------------------------*/
202
203 /*
204 * We may not have an RNDIS configuration, but if we do it needs to be
205 * the first one present. That's to make Microsoft's drivers happy,
206 * and to follow DOCSIS 1.0 (cable modem standard).
207 */
rndis_do_config(struct usb_configuration * c)208 static int rndis_do_config(struct usb_configuration *c)
209 {
210 int status;
211
212 /* FIXME alloc iConfiguration string, set it in c->strings */
213
214 if (gadget_is_otg(c->cdev->gadget)) {
215 c->descriptors = otg_desc;
216 c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
217 }
218
219 f_rndis = usb_get_function(fi_rndis);
220 if (IS_ERR(f_rndis))
221 return PTR_ERR(f_rndis);
222
223 status = usb_add_function(c, f_rndis);
224 if (status < 0)
225 usb_put_function(f_rndis);
226
227 return status;
228 }
229
230 static struct usb_configuration rndis_config_driver = {
231 .label = "RNDIS",
232 .bConfigurationValue = 2,
233 /* .iConfiguration = DYNAMIC */
234 .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
235 };
236
237 /*-------------------------------------------------------------------------*/
238
239 #ifdef CONFIG_USB_ETH_EEM
240 static bool use_eem = 1;
241 #else
242 static bool use_eem;
243 #endif
244 module_param(use_eem, bool, 0);
245 MODULE_PARM_DESC(use_eem, "use CDC EEM mode");
246
247 /*
248 * We _always_ have an ECM, CDC Subset, or EEM configuration.
249 */
eth_do_config(struct usb_configuration * c)250 static int eth_do_config(struct usb_configuration *c)
251 {
252 int status = 0;
253
254 /* FIXME alloc iConfiguration string, set it in c->strings */
255
256 if (gadget_is_otg(c->cdev->gadget)) {
257 c->descriptors = otg_desc;
258 c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
259 }
260
261 if (use_eem) {
262 f_eem = usb_get_function(fi_eem);
263 if (IS_ERR(f_eem))
264 return PTR_ERR(f_eem);
265
266 status = usb_add_function(c, f_eem);
267 if (status < 0)
268 usb_put_function(f_eem);
269
270 return status;
271 } else if (can_support_ecm(c->cdev->gadget)) {
272 f_ecm = usb_get_function(fi_ecm);
273 if (IS_ERR(f_ecm))
274 return PTR_ERR(f_ecm);
275
276 status = usb_add_function(c, f_ecm);
277 if (status < 0)
278 usb_put_function(f_ecm);
279
280 return status;
281 } else {
282 f_geth = usb_get_function(fi_geth);
283 if (IS_ERR(f_geth))
284 return PTR_ERR(f_geth);
285
286 status = usb_add_function(c, f_geth);
287 if (status < 0)
288 usb_put_function(f_geth);
289
290 return status;
291 }
292
293 }
294
295 static struct usb_configuration eth_config_driver = {
296 /* .label = f(hardware) */
297 .bConfigurationValue = 1,
298 /* .iConfiguration = DYNAMIC */
299 .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
300 };
301
302 /*-------------------------------------------------------------------------*/
303
eth_bind(struct usb_composite_dev * cdev)304 static int eth_bind(struct usb_composite_dev *cdev)
305 {
306 struct usb_gadget *gadget = cdev->gadget;
307 struct f_eem_opts *eem_opts = NULL;
308 struct f_ecm_opts *ecm_opts = NULL;
309 struct f_gether_opts *geth_opts = NULL;
310 struct net_device *net;
311 int status;
312
313 /* set up main config label and device descriptor */
314 if (use_eem) {
315 /* EEM */
316 fi_eem = usb_get_function_instance("eem");
317 if (IS_ERR(fi_eem))
318 return PTR_ERR(fi_eem);
319
320 eem_opts = container_of(fi_eem, struct f_eem_opts, func_inst);
321
322 net = eem_opts->net;
323
324 eth_config_driver.label = "CDC Ethernet (EEM)";
325 device_desc.idVendor = cpu_to_le16(EEM_VENDOR_NUM);
326 device_desc.idProduct = cpu_to_le16(EEM_PRODUCT_NUM);
327 } else if (can_support_ecm(gadget)) {
328 /* ECM */
329
330 fi_ecm = usb_get_function_instance("ecm");
331 if (IS_ERR(fi_ecm))
332 return PTR_ERR(fi_ecm);
333
334 ecm_opts = container_of(fi_ecm, struct f_ecm_opts, func_inst);
335
336 net = ecm_opts->net;
337
338 eth_config_driver.label = "CDC Ethernet (ECM)";
339 } else {
340 /* CDC Subset */
341
342 fi_geth = usb_get_function_instance("geth");
343 if (IS_ERR(fi_geth))
344 return PTR_ERR(fi_geth);
345
346 geth_opts = container_of(fi_geth, struct f_gether_opts,
347 func_inst);
348
349 net = geth_opts->net;
350
351 eth_config_driver.label = "CDC Subset/SAFE";
352
353 device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
354 device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM);
355 if (!has_rndis())
356 device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
357 }
358
359 gether_set_qmult(net, qmult);
360 if (!gether_set_host_addr(net, host_addr))
361 pr_info("using host ethernet address: %s", host_addr);
362 if (!gether_set_dev_addr(net, dev_addr))
363 pr_info("using self ethernet address: %s", dev_addr);
364
365 if (has_rndis()) {
366 /* RNDIS plus ECM-or-Subset */
367 gether_set_gadget(net, cdev->gadget);
368 status = gether_register_netdev(net);
369 if (status)
370 goto fail;
371
372 if (use_eem)
373 eem_opts->bound = true;
374 else if (can_support_ecm(gadget))
375 ecm_opts->bound = true;
376 else
377 geth_opts->bound = true;
378
379 fi_rndis = usb_get_function_instance("rndis");
380 if (IS_ERR(fi_rndis)) {
381 status = PTR_ERR(fi_rndis);
382 goto fail;
383 }
384
385 rndis_borrow_net(fi_rndis, net);
386
387 device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
388 device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
389 device_desc.bNumConfigurations = 2;
390 }
391
392 /* Allocate string descriptor numbers ... note that string
393 * contents can be overridden by the composite_dev glue.
394 */
395
396 status = usb_string_ids_tab(cdev, strings_dev);
397 if (status < 0)
398 goto fail1;
399 device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
400 device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
401
402 if (gadget_is_otg(gadget) && !otg_desc[0]) {
403 struct usb_descriptor_header *usb_desc;
404
405 usb_desc = usb_otg_descriptor_alloc(gadget);
406 if (!usb_desc) {
407 status = -ENOMEM;
408 goto fail1;
409 }
410 usb_otg_descriptor_init(gadget, usb_desc);
411 otg_desc[0] = usb_desc;
412 otg_desc[1] = NULL;
413 }
414
415 /* register our configuration(s); RNDIS first, if it's used */
416 if (has_rndis()) {
417 status = usb_add_config(cdev, &rndis_config_driver,
418 rndis_do_config);
419 if (status < 0)
420 goto fail2;
421 }
422
423 status = usb_add_config(cdev, ð_config_driver, eth_do_config);
424 if (status < 0)
425 goto fail2;
426
427 usb_composite_overwrite_options(cdev, &coverwrite);
428 dev_info(&gadget->dev, "%s, version: " DRIVER_VERSION "\n",
429 DRIVER_DESC);
430
431 return 0;
432
433 fail2:
434 kfree(otg_desc[0]);
435 otg_desc[0] = NULL;
436 fail1:
437 if (has_rndis())
438 usb_put_function_instance(fi_rndis);
439 fail:
440 if (use_eem)
441 usb_put_function_instance(fi_eem);
442 else if (can_support_ecm(gadget))
443 usb_put_function_instance(fi_ecm);
444 else
445 usb_put_function_instance(fi_geth);
446 return status;
447 }
448
eth_unbind(struct usb_composite_dev * cdev)449 static int eth_unbind(struct usb_composite_dev *cdev)
450 {
451 if (has_rndis()) {
452 usb_put_function(f_rndis);
453 usb_put_function_instance(fi_rndis);
454 }
455 if (use_eem) {
456 usb_put_function(f_eem);
457 usb_put_function_instance(fi_eem);
458 } else if (can_support_ecm(cdev->gadget)) {
459 usb_put_function(f_ecm);
460 usb_put_function_instance(fi_ecm);
461 } else {
462 usb_put_function(f_geth);
463 usb_put_function_instance(fi_geth);
464 }
465 kfree(otg_desc[0]);
466 otg_desc[0] = NULL;
467
468 return 0;
469 }
470
471 static struct usb_composite_driver eth_driver = {
472 .name = "g_ether",
473 .dev = &device_desc,
474 .strings = dev_strings,
475 .max_speed = USB_SPEED_SUPER,
476 .bind = eth_bind,
477 .unbind = eth_unbind,
478 };
479
480 module_usb_composite_driver(eth_driver);
481
482 MODULE_DESCRIPTION(PREFIX DRIVER_DESC);
483 MODULE_AUTHOR("David Brownell, Benedikt Spanger");
484 MODULE_LICENSE("GPL");
485