1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include <dt-bindings/interrupt-controller/irq.h>
5#include <dt-bindings/interrupt-controller/arm-gic.h>
6#include <dt-bindings/clock/qcom,gcc-msm8660.h>
7#include <dt-bindings/soc/qcom,gsbi.h>
8
9/ {
10	#address-cells = <1>;
11	#size-cells = <1>;
12	model = "Qualcomm MSM8660";
13	compatible = "qcom,msm8660";
14	interrupt-parent = <&intc>;
15
16	cpus {
17		#address-cells = <1>;
18		#size-cells = <0>;
19
20		cpu@0 {
21			compatible = "qcom,scorpion";
22			enable-method = "qcom,gcc-msm8660";
23			device_type = "cpu";
24			reg = <0>;
25			next-level-cache = <&L2>;
26		};
27
28		cpu@1 {
29			compatible = "qcom,scorpion";
30			enable-method = "qcom,gcc-msm8660";
31			device_type = "cpu";
32			reg = <1>;
33			next-level-cache = <&L2>;
34		};
35
36		L2: l2-cache {
37			compatible = "cache";
38			cache-level = <2>;
39			cache-unified;
40		};
41	};
42
43	memory {
44		device_type = "memory";
45		reg = <0x0 0x0>;
46	};
47
48	cpu-pmu {
49		compatible = "qcom,scorpion-mp-pmu";
50		interrupts = <1 9 0x304>;
51	};
52
53	clocks {
54		cxo_board: cxo-board-clk {
55			compatible = "fixed-clock";
56			#clock-cells = <0>;
57			clock-frequency = <19200000>;
58			clock-output-names = "cxo_board";
59		};
60
61		pxo_board: pxo-board-clk {
62			compatible = "fixed-clock";
63			#clock-cells = <0>;
64			clock-frequency = <27000000>;
65			clock-output-names = "pxo_board";
66		};
67
68		sleep-clk {
69			compatible = "fixed-clock";
70			#clock-cells = <0>;
71			clock-frequency = <32768>;
72			clock-output-names = "sleep_clk";
73		};
74	};
75
76	/*
77	 * These channels from the ADC are simply hardware monitors.
78	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
79	 * ADC.
80	 */
81	iio-hwmon {
82		compatible = "iio-hwmon";
83		io-channels = <&pm8058_xoadc 0x00 0x01>, /* Battery */
84			      <&pm8058_xoadc 0x00 0x02>, /* DC in (charger) */
85			      <&pm8058_xoadc 0x00 0x04>, /* VPH the main system voltage */
86			      <&pm8058_xoadc 0x00 0x0b>, /* Die temperature */
87			      <&pm8058_xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
88			      <&pm8058_xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
89			      <&pm8058_xoadc 0x00 0x0e>; /* Reference voltage 0.325V */
90	};
91
92	soc: soc {
93		#address-cells = <1>;
94		#size-cells = <1>;
95		ranges;
96		compatible = "simple-bus";
97
98		intc: interrupt-controller@2080000 {
99			compatible = "qcom,msm-8660-qgic";
100			interrupt-controller;
101			#interrupt-cells = <3>;
102			reg = < 0x02080000 0x1000 >,
103			      < 0x02081000 0x1000 >;
104		};
105
106		timer@2000000 {
107			compatible = "qcom,scss-timer", "qcom,msm-timer";
108			interrupts = <1 0 0x301>,
109				     <1 1 0x301>,
110				     <1 2 0x301>;
111			reg = <0x02000000 0x100>;
112			clock-frequency = <27000000>,
113					  <32768>;
114			cpu-offset = <0x40000>;
115		};
116
117		tlmm: pinctrl@800000 {
118			compatible = "qcom,msm8660-pinctrl";
119			reg = <0x800000 0x4000>;
120
121			gpio-controller;
122			gpio-ranges = <&tlmm 0 0 173>;
123			#gpio-cells = <2>;
124			interrupts = <0 16 0x4>;
125			interrupt-controller;
126			#interrupt-cells = <2>;
127
128		};
129
130		gcc: clock-controller@900000 {
131			compatible = "qcom,gcc-msm8660";
132			#clock-cells = <1>;
133			#power-domain-cells = <1>;
134			#reset-cells = <1>;
135			reg = <0x900000 0x4000>;
136			clocks = <&pxo_board>, <&cxo_board>;
137			clock-names = "pxo", "cxo";
138		};
139
140		gsbi1: gsbi@16000000 {
141			compatible = "qcom,gsbi-v1.0.0";
142			cell-index = <12>;
143			reg = <0x16000000 0x100>;
144			clocks = <&gcc GSBI1_H_CLK>;
145			clock-names = "iface";
146			#address-cells = <1>;
147			#size-cells = <1>;
148			ranges;
149
150			syscon-tcsr = <&tcsr>;
151
152			status = "disabled";
153
154			gsbi1_spi: spi@16080000 {
155				compatible = "qcom,spi-qup-v1.1.1";
156				reg = <0x16080000 0x1000>;
157				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
158				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
159				clock-names = "core", "iface";
160				#address-cells = <1>;
161				#size-cells = <0>;
162				status = "disabled";
163			};
164		};
165
166		gsbi3: gsbi@16200000 {
167			compatible = "qcom,gsbi-v1.0.0";
168			cell-index = <12>;
169			reg = <0x16200000 0x100>;
170			clocks = <&gcc GSBI3_H_CLK>;
171			clock-names = "iface";
172			#address-cells = <1>;
173			#size-cells = <1>;
174			ranges;
175
176			syscon-tcsr = <&tcsr>;
177			status = "disabled";
178
179			gsbi3_i2c: i2c@16280000 {
180				compatible = "qcom,i2c-qup-v1.1.1";
181				reg = <0x16280000 0x1000>;
182				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
183				clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>;
184				clock-names = "core", "iface";
185				#address-cells = <1>;
186				#size-cells = <0>;
187				status = "disabled";
188			};
189		};
190
191		gsbi6: gsbi@16500000 {
192			compatible = "qcom,gsbi-v1.0.0";
193			cell-index = <12>;
194			reg = <0x16500000 0x100>;
195			clocks = <&gcc GSBI6_H_CLK>;
196			clock-names = "iface";
197			#address-cells = <1>;
198			#size-cells = <1>;
199			ranges;
200			status = "disabled";
201
202			syscon-tcsr = <&tcsr>;
203
204			gsbi6_serial: serial@16540000 {
205				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
206				reg = <0x16540000 0x1000>,
207				      <0x16500000 0x1000>;
208				interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
209				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
210				clock-names = "core", "iface";
211				status = "disabled";
212			};
213
214			gsbi6_i2c: i2c@16580000 {
215				compatible = "qcom,i2c-qup-v1.1.1";
216				reg = <0x16580000 0x1000>;
217				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
218				clocks = <&gcc GSBI6_QUP_CLK>, <&gcc GSBI6_H_CLK>;
219				clock-names = "core", "iface";
220				#address-cells = <1>;
221				#size-cells = <0>;
222				status = "disabled";
223			};
224		};
225
226		gsbi7: gsbi@16600000 {
227			compatible = "qcom,gsbi-v1.0.0";
228			cell-index = <12>;
229			reg = <0x16600000 0x100>;
230			clocks = <&gcc GSBI7_H_CLK>;
231			clock-names = "iface";
232			#address-cells = <1>;
233			#size-cells = <1>;
234			ranges;
235			status = "disabled";
236
237			syscon-tcsr = <&tcsr>;
238
239			gsbi7_serial: serial@16640000 {
240				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
241				reg = <0x16640000 0x1000>,
242				      <0x16600000 0x1000>;
243				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
244				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
245				clock-names = "core", "iface";
246				status = "disabled";
247			};
248
249			gsbi7_i2c: i2c@16680000 {
250				compatible = "qcom,i2c-qup-v1.1.1";
251				reg = <0x16680000 0x1000>;
252				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
253				clocks = <&gcc GSBI7_QUP_CLK>, <&gcc GSBI7_H_CLK>;
254				clock-names = "core", "iface";
255				#address-cells = <1>;
256				#size-cells = <0>;
257				status = "disabled";
258			};
259		};
260
261		gsbi8: gsbi@19800000 {
262			compatible = "qcom,gsbi-v1.0.0";
263			cell-index = <12>;
264			reg = <0x19800000 0x100>;
265			clocks = <&gcc GSBI8_H_CLK>;
266			clock-names = "iface";
267			#address-cells = <1>;
268			#size-cells = <1>;
269			ranges;
270
271			syscon-tcsr = <&tcsr>;
272			status = "disabled";
273
274			gsbi8_i2c: i2c@19880000 {
275				compatible = "qcom,i2c-qup-v1.1.1";
276				reg = <0x19880000 0x1000>;
277				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
278				clocks = <&gcc GSBI8_QUP_CLK>, <&gcc GSBI8_H_CLK>;
279				clock-names = "core", "iface";
280				#address-cells = <1>;
281				#size-cells = <0>;
282				status = "disabled";
283			};
284		};
285
286		gsbi12: gsbi@19c00000 {
287			compatible = "qcom,gsbi-v1.0.0";
288			cell-index = <12>;
289			reg = <0x19c00000 0x100>;
290			clocks = <&gcc GSBI12_H_CLK>;
291			clock-names = "iface";
292			#address-cells = <1>;
293			#size-cells = <1>;
294			ranges;
295
296			syscon-tcsr = <&tcsr>;
297
298			gsbi12_serial: serial@19c40000 {
299				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
300				reg = <0x19c40000 0x1000>,
301				      <0x19c00000 0x1000>;
302				interrupts = <0 195 IRQ_TYPE_LEVEL_HIGH>;
303				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
304				clock-names = "core", "iface";
305				status = "disabled";
306			};
307
308			gsbi12_i2c: i2c@19c80000 {
309				compatible = "qcom,i2c-qup-v1.1.1";
310				reg = <0x19c80000 0x1000>;
311				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
312				clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
313				clock-names = "core", "iface";
314				#address-cells = <1>;
315				#size-cells = <0>;
316				status = "disabled";
317			};
318		};
319
320		ebi2: external-bus@1a100000 {
321			compatible = "qcom,msm8660-ebi2";
322			#address-cells = <2>;
323			#size-cells = <1>;
324			ranges = <0 0x0 0x1a800000 0x00800000>,
325				 <1 0x0 0x1b000000 0x00800000>,
326				 <2 0x0 0x1b800000 0x00800000>,
327				 <3 0x0 0x1d000000 0x08000000>,
328				 <4 0x0 0x1c800000 0x00800000>,
329				 <5 0x0 0x1c000000 0x00800000>;
330			reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
331			reg-names = "ebi2", "xmem";
332			clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
333			clock-names = "ebi2x", "ebi2";
334			status = "disabled";
335		};
336
337		ssbi@500000 {
338			compatible = "qcom,ssbi";
339			reg = <0x500000 0x1000>;
340			qcom,controller-type = "pmic-arbiter";
341
342			pm8058: pmic {
343				compatible = "qcom,pm8058";
344				interrupt-parent = <&tlmm>;
345				interrupts = <88 8>;
346				#interrupt-cells = <2>;
347				interrupt-controller;
348				#address-cells = <1>;
349				#size-cells = <0>;
350
351				pm8058_gpio: gpio@150 {
352					compatible = "qcom,pm8058-gpio",
353						     "qcom,ssbi-gpio";
354					reg = <0x150>;
355					interrupt-controller;
356					#interrupt-cells = <2>;
357					gpio-controller;
358					gpio-ranges = <&pm8058_gpio 0 0 44>;
359					#gpio-cells = <2>;
360
361				};
362
363				pm8058_mpps: mpps@50 {
364					compatible = "qcom,pm8058-mpp",
365						     "qcom,ssbi-mpp";
366					reg = <0x50>;
367					gpio-controller;
368					#gpio-cells = <2>;
369					gpio-ranges = <&pm8058_mpps 0 0 12>;
370					interrupt-controller;
371					#interrupt-cells = <2>;
372				};
373
374				pwrkey@1c {
375					compatible = "qcom,pm8058-pwrkey";
376					reg = <0x1c>;
377					interrupt-parent = <&pm8058>;
378					interrupts = <50 1>, <51 1>;
379					debounce = <15625>;
380					pull-up;
381				};
382
383				pm8058_keypad: keypad@148 {
384					compatible = "qcom,pm8058-keypad";
385					reg = <0x148>;
386					interrupt-parent = <&pm8058>;
387					interrupts = <74 1>, <75 1>;
388					debounce = <15>;
389					scan-delay = <32>;
390					row-hold = <91500>;
391				};
392
393				pm8058_xoadc: xoadc@197 {
394					compatible = "qcom,pm8058-adc";
395					reg = <0x197>;
396					interrupts-extended = <&pm8058 76 IRQ_TYPE_EDGE_RISING>;
397					#address-cells = <2>;
398					#size-cells = <0>;
399					#io-channel-cells = <2>;
400
401					vcoin: adc-channel@0 {
402						reg = <0x00 0x00>;
403					};
404					vbat: adc-channel@1 {
405						reg = <0x00 0x01>;
406					};
407					dcin: adc-channel@2 {
408						reg = <0x00 0x02>;
409					};
410					ichg: adc-channel@3 {
411						reg = <0x00 0x03>;
412					};
413					vph_pwr: adc-channel@4 {
414						reg = <0x00 0x04>;
415					};
416					usb_vbus: adc-channel@a {
417						reg = <0x00 0x0a>;
418					};
419					die_temp: adc-channel@b {
420						reg = <0x00 0x0b>;
421					};
422					ref_625mv: adc-channel@c {
423						reg = <0x00 0x0c>;
424					};
425					ref_1250mv: adc-channel@d {
426						reg = <0x00 0x0d>;
427					};
428					ref_325mv: adc-channel@e {
429						reg = <0x00 0x0e>;
430					};
431					ref_muxoff: adc-channel@f {
432						reg = <0x00 0x0f>;
433					};
434				};
435
436				rtc@1e8 {
437					compatible = "qcom,pm8058-rtc";
438					reg = <0x1e8>;
439					interrupt-parent = <&pm8058>;
440					interrupts = <39 1>;
441					allow-set-time;
442				};
443
444				vibrator@4a {
445					compatible = "qcom,pm8058-vib";
446					reg = <0x4a>;
447				};
448
449				pm8058_led48: led@48 {
450					compatible = "qcom,pm8058-keypad-led";
451					reg = <0x48>;
452					status = "disabled";
453				};
454
455				pm8058_led131: led@131 {
456					compatible = "qcom,pm8058-led";
457					reg = <0x131>;
458					status = "disabled";
459				};
460
461				pm8058_led132: led@132 {
462					compatible = "qcom,pm8058-led";
463					reg = <0x132>;
464					status = "disabled";
465				};
466
467				pm8058_led133: led@133 {
468					compatible = "qcom,pm8058-led";
469					reg = <0x133>;
470					status = "disabled";
471				};
472
473			};
474		};
475
476		l2cc: clock-controller@2082000 {
477			compatible = "qcom,kpss-gcc-msm8660", "qcom,kpss-gcc", "syscon";
478			reg = <0x02082000 0x1000>;
479		};
480
481		rpm: rpm@104000 {
482			compatible = "qcom,rpm-msm8660";
483			reg = <0x00104000 0x1000>;
484			qcom,ipc = <&l2cc 0x8 2>;
485
486			interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
487				     <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
488				     <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
489			interrupt-names = "ack", "err", "wakeup";
490			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
491			clock-names = "ram";
492
493			rpmcc: clock-controller {
494				compatible = "qcom,rpmcc-msm8660", "qcom,rpmcc";
495				#clock-cells = <1>;
496				clocks = <&pxo_board>;
497				clock-names = "pxo";
498			};
499
500			regulators-0 {
501				compatible = "qcom,rpm-pm8901-regulators";
502
503				pm8901_l0: l0 {};
504				pm8901_l1: l1 {};
505				pm8901_l2: l2 {};
506				pm8901_l3: l3 {};
507				pm8901_l4: l4 {};
508				pm8901_l5: l5 {};
509				pm8901_l6: l6 {};
510
511				/* S0 and S1 Handled as SAW regulators by SPM */
512				pm8901_s2: s2 {};
513				pm8901_s3: s3 {};
514				pm8901_s4: s4 {};
515
516				pm8901_lvs0: lvs0 {};
517				pm8901_lvs1: lvs1 {};
518				pm8901_lvs2: lvs2 {};
519				pm8901_lvs3: lvs3 {};
520
521				pm8901_mvs: mvs {};
522			};
523
524			regulators-1 {
525				compatible = "qcom,rpm-pm8058-regulators";
526
527				pm8058_l0: l0 {};
528				pm8058_l1: l1 {};
529				pm8058_l2: l2 {};
530				pm8058_l3: l3 {};
531				pm8058_l4: l4 {};
532				pm8058_l5: l5 {};
533				pm8058_l6: l6 {};
534				pm8058_l7: l7 {};
535				pm8058_l8: l8 {};
536				pm8058_l9: l9 {};
537				pm8058_l10: l10 {};
538				pm8058_l11: l11 {};
539				pm8058_l12: l12 {};
540				pm8058_l13: l13 {};
541				pm8058_l14: l14 {};
542				pm8058_l15: l15 {};
543				pm8058_l16: l16 {};
544				pm8058_l17: l17 {};
545				pm8058_l18: l18 {};
546				pm8058_l19: l19 {};
547				pm8058_l20: l20 {};
548				pm8058_l21: l21 {};
549				pm8058_l22: l22 {};
550				pm8058_l23: l23 {};
551				pm8058_l24: l24 {};
552				pm8058_l25: l25 {};
553
554				pm8058_s0: s0 {};
555				pm8058_s1: s1 {};
556				pm8058_s2: s2 {};
557				pm8058_s3: s3 {};
558				pm8058_s4: s4 {};
559
560				pm8058_lvs0: lvs0 {};
561				pm8058_lvs1: lvs1 {};
562
563				pm8058_ncp: ncp {};
564			};
565		};
566
567		amba {
568			compatible = "simple-bus";
569			#address-cells = <1>;
570			#size-cells = <1>;
571			ranges;
572			sdcc1: mmc@12400000 {
573				status = "disabled";
574				compatible = "arm,pl18x", "arm,primecell";
575				arm,primecell-periphid = <0x00051180>;
576				reg = <0x12400000 0x8000>;
577				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
578				clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
579				clock-names = "mclk", "apb_pclk";
580				bus-width = <8>;
581				max-frequency = <48000000>;
582				non-removable;
583				cap-sd-highspeed;
584				cap-mmc-highspeed;
585			};
586
587			sdcc2: mmc@12140000 {
588				status = "disabled";
589				compatible = "arm,pl18x", "arm,primecell";
590				arm,primecell-periphid = <0x00051180>;
591				reg = <0x12140000 0x8000>;
592				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
593				clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>;
594				clock-names = "mclk", "apb_pclk";
595				bus-width = <8>;
596				max-frequency = <48000000>;
597				cap-sd-highspeed;
598				cap-mmc-highspeed;
599			};
600
601			sdcc3: mmc@12180000 {
602				compatible = "arm,pl18x", "arm,primecell";
603				arm,primecell-periphid = <0x00051180>;
604				status = "disabled";
605				reg = <0x12180000 0x8000>;
606				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
607				clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
608				clock-names = "mclk", "apb_pclk";
609				bus-width = <4>;
610				cap-sd-highspeed;
611				cap-mmc-highspeed;
612				max-frequency = <48000000>;
613				no-1-8-v;
614			};
615
616			sdcc4: mmc@121c0000 {
617				compatible = "arm,pl18x", "arm,primecell";
618				arm,primecell-periphid = <0x00051180>;
619				status = "disabled";
620				reg = <0x121c0000 0x8000>;
621				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
622				clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
623				clock-names = "mclk", "apb_pclk";
624				bus-width = <4>;
625				max-frequency = <48000000>;
626				cap-sd-highspeed;
627				cap-mmc-highspeed;
628			};
629
630			sdcc5: mmc@12200000 {
631				compatible = "arm,pl18x", "arm,primecell";
632				arm,primecell-periphid = <0x00051180>;
633				status = "disabled";
634				reg = <0x12200000 0x8000>;
635				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
636				clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
637				clock-names = "mclk", "apb_pclk";
638				bus-width = <4>;
639				cap-sd-highspeed;
640				cap-mmc-highspeed;
641				max-frequency = <48000000>;
642			};
643		};
644
645		tcsr: syscon@1a400000 {
646			compatible = "qcom,tcsr-msm8660", "syscon";
647			reg = <0x1a400000 0x100>;
648		};
649	};
650
651};
652