1 /**************************************************************************
2 * Copyright (c) 2009-2011, Intel Corporation.
3 * All Rights Reserved.
4 *
5 * Permission is hereby granted, free of charge, to any person obtaining a
6 * copy of this software and associated documentation files (the "Software"),
7 * to deal in the Software without restriction, including without limitation
8 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
9 * and/or sell copies of the Software, and to permit persons to whom the
10 * Software is furnished to do so, subject to the following conditions:
11 *
12 * The above copyright notice and this permission notice (including the next
13 * paragraph) shall be included in all copies or substantial portions of the
14 * Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
22 * SOFTWARE.
23 *
24 * Authors:
25 * Benjamin Defnet <benjamin.r.defnet@intel.com>
26 * Rajesh Poornachandran <rajesh.poornachandran@intel.com>
27 * Massively reworked
28 * Alan Cox <alan@linux.intel.com>
29 */
30
31 #include "gem.h"
32 #include "power.h"
33 #include "psb_drv.h"
34 #include "psb_reg.h"
35 #include "psb_intel_reg.h"
36 #include "psb_irq.h"
37 #include <linux/mutex.h>
38 #include <linux/pm_runtime.h>
39
40 /**
41 * gma_power_init - initialise power manager
42 * @dev: our device
43 *
44 * Set up for power management tracking of our hardware.
45 */
gma_power_init(struct drm_device * dev)46 void gma_power_init(struct drm_device *dev)
47 {
48 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
49
50 /* FIXME: Move APM/OSPM base into relevant device code */
51 dev_priv->apm_base = dev_priv->apm_reg & 0xffff;
52 dev_priv->ospm_base &= 0xffff;
53
54 if (dev_priv->ops->init_pm)
55 dev_priv->ops->init_pm(dev);
56
57 /*
58 * Runtime pm support is broken atm. So for now unconditionally
59 * call pm_runtime_get() here and put it again in psb_driver_unload()
60 *
61 * To fix this we need to call pm_runtime_get() once for each active
62 * pipe at boot and then put() / get() for each pipe disable / enable
63 * so that the device gets runtime suspended when no pipes are active.
64 * Once this is in place the pm_runtime_get() below should be replaced
65 * by a pm_runtime_allow() call to undo the pm_runtime_forbid() from
66 * pci_pm_init().
67 */
68 pm_runtime_get(dev->dev);
69
70 dev_priv->pm_initialized = true;
71 }
72
73 /**
74 * gma_power_uninit - end power manager
75 * @dev: device to end for
76 *
77 * Undo the effects of gma_power_init
78 */
gma_power_uninit(struct drm_device * dev)79 void gma_power_uninit(struct drm_device *dev)
80 {
81 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
82
83 if (!dev_priv->pm_initialized)
84 return;
85
86 pm_runtime_put_noidle(dev->dev);
87 }
88
89 /**
90 * gma_suspend_display - suspend the display logic
91 * @dev: our DRM device
92 *
93 * Suspend the display logic of the graphics interface
94 */
gma_suspend_display(struct drm_device * dev)95 static void gma_suspend_display(struct drm_device *dev)
96 {
97 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
98
99 dev_priv->ops->save_regs(dev);
100 dev_priv->ops->power_down(dev);
101 }
102
103 /**
104 * gma_resume_display - resume display side logic
105 * @pdev: PCI device
106 *
107 * Resume the display hardware restoring state and enabling
108 * as necessary.
109 */
gma_resume_display(struct pci_dev * pdev)110 static void gma_resume_display(struct pci_dev *pdev)
111 {
112 struct drm_device *dev = pci_get_drvdata(pdev);
113 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
114
115 /* turn on the display power island */
116 dev_priv->ops->power_up(dev);
117
118 PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL);
119 pci_write_config_word(pdev, PSB_GMCH_CTRL,
120 dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED);
121
122 /* Rebuild our GTT mappings */
123 psb_gtt_resume(dev);
124 psb_gem_mm_resume(dev);
125 dev_priv->ops->restore_regs(dev);
126 }
127
128 /**
129 * gma_suspend_pci - suspend PCI side
130 * @pdev: PCI device
131 *
132 * Perform the suspend processing on our PCI device state
133 */
gma_suspend_pci(struct pci_dev * pdev)134 static void gma_suspend_pci(struct pci_dev *pdev)
135 {
136 struct drm_device *dev = pci_get_drvdata(pdev);
137 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
138 int bsm, vbt;
139
140 pci_save_state(pdev);
141 pci_read_config_dword(pdev, 0x5C, &bsm);
142 dev_priv->regs.saveBSM = bsm;
143 pci_read_config_dword(pdev, 0xFC, &vbt);
144 dev_priv->regs.saveVBT = vbt;
145
146 pci_disable_device(pdev);
147 pci_set_power_state(pdev, PCI_D3hot);
148 }
149
150 /**
151 * gma_resume_pci - resume helper
152 * @pdev: our PCI device
153 *
154 * Perform the resume processing on our PCI device state - rewrite
155 * register state and re-enable the PCI device
156 */
gma_resume_pci(struct pci_dev * pdev)157 static int gma_resume_pci(struct pci_dev *pdev)
158 {
159 struct drm_device *dev = pci_get_drvdata(pdev);
160 struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
161
162 pci_set_power_state(pdev, PCI_D0);
163 pci_restore_state(pdev);
164 pci_write_config_dword(pdev, 0x5c, dev_priv->regs.saveBSM);
165 pci_write_config_dword(pdev, 0xFC, dev_priv->regs.saveVBT);
166
167 return pci_enable_device(pdev);
168 }
169
170 /**
171 * gma_power_suspend - bus callback for suspend
172 * @_dev: our device
173 *
174 * Called back by the PCI layer during a suspend of the system. We
175 * perform the necessary shut down steps and save enough state that
176 * we can undo this when resume is called.
177 */
gma_power_suspend(struct device * _dev)178 int gma_power_suspend(struct device *_dev)
179 {
180 struct pci_dev *pdev = to_pci_dev(_dev);
181 struct drm_device *dev = pci_get_drvdata(pdev);
182
183 gma_irq_uninstall(dev);
184 gma_suspend_display(dev);
185 gma_suspend_pci(pdev);
186 return 0;
187 }
188
189 /**
190 * gma_power_resume - resume power
191 * @_dev: our device
192 *
193 * Resume the PCI side of the graphics and then the displays
194 */
gma_power_resume(struct device * _dev)195 int gma_power_resume(struct device *_dev)
196 {
197 struct pci_dev *pdev = to_pci_dev(_dev);
198 struct drm_device *dev = pci_get_drvdata(pdev);
199
200 gma_resume_pci(pdev);
201 gma_resume_display(pdev);
202 gma_irq_install(dev);
203 return 0;
204 }
205
206 /**
207 * gma_power_begin - begin requiring power
208 * @dev: our DRM device
209 * @force_on: true to force power on
210 *
211 * Begin an action that requires the display power island is enabled.
212 * We refcount the islands.
213 */
gma_power_begin(struct drm_device * dev,bool force_on)214 bool gma_power_begin(struct drm_device *dev, bool force_on)
215 {
216 if (force_on)
217 return pm_runtime_resume_and_get(dev->dev) == 0;
218 else
219 return pm_runtime_get_if_in_use(dev->dev) == 1;
220 }
221
222 /**
223 * gma_power_end - end use of power
224 * @dev: Our DRM device
225 *
226 * Indicate that one of our gma_power_begin() requested periods when
227 * the diplay island power is needed has completed.
228 */
gma_power_end(struct drm_device * dev)229 void gma_power_end(struct drm_device *dev)
230 {
231 pm_runtime_put(dev->dev);
232 }
233