1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * eisa_enumerator.c - provide support for EISA adapters in PA-RISC machines
4 *
5 * Copyright (c) 2002 Daniel Engstrom <5116@telia.com>
6 */
7
8 #include <linux/ioport.h>
9 #include <linux/init.h>
10 #include <linux/kernel.h>
11 #include <linux/slab.h>
12 #include <asm/io.h>
13 #include <linux/uaccess.h>
14 #include <asm/byteorder.h>
15
16 #include <asm/eisa_bus.h>
17 #include <asm/eisa_eeprom.h>
18
19
20 /*
21 * Todo:
22 *
23 * PORT init with MASK attr and other size than byte
24 * MEMORY with other decode than 20 bit
25 * CRC stuff
26 * FREEFORM stuff
27 */
28
29 #define EPI 0xc80
30 #define NUM_SLOT 16
31 #define SLOT2PORT(x) (x<<12)
32
33
34 /* macros to handle unaligned accesses and
35 * byte swapping. The data in the EEPROM is
36 * little-endian on the big-endian PAROSC */
37 #define get_8(x) (*(u_int8_t*)(x))
38
get_16(const unsigned char * x)39 static inline u_int16_t get_16(const unsigned char *x)
40 {
41 return (x[1] << 8) | x[0];
42 }
43
get_32(const unsigned char * x)44 static inline u_int32_t get_32(const unsigned char *x)
45 {
46 return (x[3] << 24) | (x[2] << 16) | (x[1] << 8) | x[0];
47 }
48
get_24(const unsigned char * x)49 static inline u_int32_t get_24(const unsigned char *x)
50 {
51 return (x[2] << 24) | (x[1] << 16) | (x[0] << 8);
52 }
53
print_eisa_id(char * s,u_int32_t id)54 static void print_eisa_id(char *s, u_int32_t id)
55 {
56 char vendor[4];
57 int rev;
58 int device;
59
60 rev = id & 0xff;
61 id >>= 8;
62 device = id & 0xff;
63 id >>= 8;
64 vendor[3] = '\0';
65 vendor[2] = '@' + (id & 0x1f);
66 id >>= 5;
67 vendor[1] = '@' + (id & 0x1f);
68 id >>= 5;
69 vendor[0] = '@' + (id & 0x1f);
70 id >>= 5;
71
72 sprintf(s, "%s%02X%02X", vendor, device, rev);
73 }
74
configure_memory(const unsigned char * buf,struct resource * mem_parent,char * name)75 static int configure_memory(const unsigned char *buf,
76 struct resource *mem_parent,
77 char *name)
78 {
79 int len;
80 u_int8_t c;
81 int i;
82 struct resource *res;
83
84 len=0;
85
86 for (i=0;i<HPEE_MEMORY_MAX_ENT;i++) {
87 c = get_8(buf+len);
88
89 if (NULL != (res = kzalloc(sizeof(struct resource), GFP_KERNEL))) {
90 int result;
91
92 res->name = name;
93 res->start = mem_parent->start + get_24(buf+len+2);
94 res->end = res->start + get_16(buf+len+5)*1024;
95 res->flags = IORESOURCE_MEM;
96 pr_cont("memory %pR ", res);
97 result = request_resource(mem_parent, res);
98 if (result < 0) {
99 printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
100 return result;
101 }
102 }
103
104 len+=7;
105
106 if (!(c & HPEE_MEMORY_MORE)) {
107 break;
108 }
109 }
110
111 return len;
112 }
113
114
configure_irq(const unsigned char * buf)115 static int configure_irq(const unsigned char *buf)
116 {
117 int len;
118 u_int8_t c;
119 int i;
120
121 len=0;
122
123 for (i=0;i<HPEE_IRQ_MAX_ENT;i++) {
124 c = get_8(buf+len);
125
126 pr_cont("IRQ %d ", c & HPEE_IRQ_CHANNEL_MASK);
127 if (c & HPEE_IRQ_TRIG_LEVEL) {
128 eisa_make_irq_level(c & HPEE_IRQ_CHANNEL_MASK);
129 } else {
130 eisa_make_irq_edge(c & HPEE_IRQ_CHANNEL_MASK);
131 }
132
133 len+=2;
134 /* hpux seems to allow for
135 * two bytes of irq data but only defines one of
136 * them, I think */
137 if (!(c & HPEE_IRQ_MORE)) {
138 break;
139 }
140 }
141
142 return len;
143 }
144
145
configure_dma(const unsigned char * buf)146 static int configure_dma(const unsigned char *buf)
147 {
148 int len;
149 u_int8_t c;
150 int i;
151
152 len=0;
153
154 for (i=0;i<HPEE_DMA_MAX_ENT;i++) {
155 c = get_8(buf+len);
156 pr_cont("DMA %d ", c&HPEE_DMA_CHANNEL_MASK);
157 /* fixme: maybe initialize the dma channel withthe timing ? */
158 len+=2;
159 if (!(c & HPEE_DMA_MORE)) {
160 break;
161 }
162 }
163
164 return len;
165 }
166
configure_port(const unsigned char * buf,struct resource * io_parent,char * board)167 static int configure_port(const unsigned char *buf, struct resource *io_parent,
168 char *board)
169 {
170 int len;
171 u_int8_t c;
172 int i;
173 struct resource *res;
174 int result;
175
176 len=0;
177
178 for (i=0;i<HPEE_PORT_MAX_ENT;i++) {
179 c = get_8(buf+len);
180
181 if (NULL != (res = kzalloc(sizeof(struct resource), GFP_KERNEL))) {
182 res->name = board;
183 res->start = get_16(buf+len+1);
184 res->end = get_16(buf+len+1)+(c&HPEE_PORT_SIZE_MASK)+1;
185 res->flags = IORESOURCE_IO;
186 pr_cont("ioports %pR ", res);
187 result = request_resource(io_parent, res);
188 if (result < 0) {
189 printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
190 return result;
191 }
192 }
193
194 len+=3;
195 if (!(c & HPEE_PORT_MORE)) {
196 break;
197 }
198 }
199
200 return len;
201 }
202
203
204 /* byte 1 and 2 is the port number to write
205 * and at byte 3 the value to write starts.
206 * I assume that there are and- and or- masks
207 * here when HPEE_PORT_INIT_MASK is set but I have
208 * not yet encountered this. */
configure_port_init(const unsigned char * buf)209 static int configure_port_init(const unsigned char *buf)
210 {
211 int len=0;
212 u_int8_t c;
213
214 while (len<HPEE_PORT_INIT_MAX_LEN) {
215 int s=0;
216 c = get_8(buf+len);
217
218 switch (c & HPEE_PORT_INIT_WIDTH_MASK) {
219 case HPEE_PORT_INIT_WIDTH_BYTE:
220 s=1;
221 if (c & HPEE_PORT_INIT_MASK) {
222 printk(KERN_WARNING "port_init: unverified mask attribute\n");
223 outb((inb(get_16(buf+len+1) &
224 get_8(buf+len+3)) |
225 get_8(buf+len+4)), get_16(buf+len+1));
226
227 } else {
228 outb(get_8(buf+len+3), get_16(buf+len+1));
229
230 }
231 break;
232 case HPEE_PORT_INIT_WIDTH_WORD:
233 s=2;
234 if (c & HPEE_PORT_INIT_MASK) {
235 printk(KERN_WARNING "port_init: unverified mask attribute\n");
236 outw((inw(get_16(buf+len+1)) &
237 get_16(buf+len+3)) |
238 get_16(buf+len+5),
239 get_16(buf+len+1));
240 } else {
241 outw(cpu_to_le16(get_16(buf+len+3)), get_16(buf+len+1));
242 }
243 break;
244 case HPEE_PORT_INIT_WIDTH_DWORD:
245 s=4;
246 if (c & HPEE_PORT_INIT_MASK) {
247 printk(KERN_WARNING "port_init: unverified mask attribute\n");
248 outl((inl(get_16(buf+len+1) &
249 get_32(buf+len+3)) |
250 get_32(buf+len+7)), get_16(buf+len+1));
251 } else {
252 outl(cpu_to_le32(get_32(buf+len+3)), get_16(buf+len+1));
253 }
254
255 break;
256 default:
257 printk(KERN_ERR "Invalid port init word %02x\n", c);
258 return 0;
259 }
260
261 if (c & HPEE_PORT_INIT_MASK) {
262 s*=2;
263 }
264
265 len+=s+3;
266 if (!(c & HPEE_PORT_INIT_MORE)) {
267 break;
268 }
269 }
270
271 return len;
272 }
273
configure_choise(const unsigned char * buf,u_int8_t * info)274 static int configure_choise(const unsigned char *buf, u_int8_t *info)
275 {
276 int len;
277
278 /* theis record contain the value of the functions
279 * configuration choises and an info byte which
280 * describes which other records to expect in this
281 * function */
282 len = get_8(buf);
283 *info=get_8(buf+len+1);
284
285 return len+2;
286 }
287
configure_type_string(const unsigned char * buf)288 static int configure_type_string(const unsigned char *buf)
289 {
290 int len;
291
292 /* just skip past the type field */
293 len = get_8(buf);
294 if (len > 80) {
295 printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
296 }
297
298 return 1+len;
299 }
300
configure_function(const unsigned char * buf,int * more)301 static int configure_function(const unsigned char *buf, int *more)
302 {
303 /* the init field seems to be a two-byte field
304 * which is non-zero if there are an other function following
305 * I think it is the length of the function def
306 */
307 *more = get_16(buf);
308
309 return 2;
310 }
311
parse_slot_config(int slot,const unsigned char * buf,struct eeprom_eisa_slot_info * es,struct resource * io_parent,struct resource * mem_parent)312 static int parse_slot_config(int slot,
313 const unsigned char *buf,
314 struct eeprom_eisa_slot_info *es,
315 struct resource *io_parent,
316 struct resource *mem_parent)
317 {
318 int res=0;
319 int function_len;
320 unsigned int pos=0;
321 unsigned int maxlen;
322 int num_func=0;
323 u_int8_t flags;
324 int p0;
325
326 char *board;
327 int id_string_used=0;
328
329 if (NULL == (board = kmalloc(8, GFP_KERNEL))) {
330 return -1;
331 }
332 print_eisa_id(board, es->eisa_slot_id);
333 printk(KERN_INFO "EISA slot %d: %s %s ",
334 slot, board, es->flags&HPEE_FLAG_BOARD_IS_ISA ? "ISA" : "EISA");
335
336 maxlen = es->config_data_length < HPEE_MAX_LENGTH ?
337 es->config_data_length : HPEE_MAX_LENGTH;
338 while ((pos < maxlen) && (num_func <= es->num_functions)) {
339 pos+=configure_function(buf+pos, &function_len);
340
341 if (!function_len) {
342 break;
343 }
344 num_func++;
345 p0 = pos;
346 pos += configure_choise(buf+pos, &flags);
347
348 if (flags & HPEE_FUNCTION_INFO_F_DISABLED) {
349 /* function disabled, skip silently */
350 pos = p0 + function_len;
351 continue;
352 }
353 if (flags & HPEE_FUNCTION_INFO_CFG_FREE_FORM) {
354 /* I have no idea how to handle this */
355 printk("function %d have free-form configuration, skipping ",
356 num_func);
357 pos = p0 + function_len;
358 continue;
359 }
360
361 /* the ordering of the sections need
362 * more investigation.
363 * Currently I think that memory comaed before IRQ
364 * I assume the order is LSB to MSB in the
365 * info flags
366 * eg type, memory, irq, dma, port, HPEE_PORT_init
367 */
368
369 if (flags & HPEE_FUNCTION_INFO_HAVE_TYPE) {
370 pos += configure_type_string(buf+pos);
371 }
372
373 if (flags & HPEE_FUNCTION_INFO_HAVE_MEMORY) {
374 id_string_used=1;
375 pos += configure_memory(buf+pos, mem_parent, board);
376 }
377
378 if (flags & HPEE_FUNCTION_INFO_HAVE_IRQ) {
379 pos += configure_irq(buf+pos);
380 }
381
382 if (flags & HPEE_FUNCTION_INFO_HAVE_DMA) {
383 pos += configure_dma(buf+pos);
384 }
385
386 if (flags & HPEE_FUNCTION_INFO_HAVE_PORT) {
387 id_string_used=1;
388 pos += configure_port(buf+pos, io_parent, board);
389 }
390
391 if (flags & HPEE_FUNCTION_INFO_HAVE_PORT_INIT) {
392 pos += configure_port_init(buf+pos);
393 }
394
395 if (p0 + function_len < pos) {
396 printk(KERN_ERR "eisa_enumerator: function %d length mismatch "
397 "got %d, expected %d\n",
398 num_func, pos-p0, function_len);
399 res=-1;
400 break;
401 }
402 pos = p0 + function_len;
403 }
404 pr_cont("\n");
405 if (!id_string_used) {
406 kfree(board);
407 }
408
409 if (pos != es->config_data_length) {
410 printk(KERN_ERR "eisa_enumerator: config data length mismatch got %d, expected %d\n",
411 pos, es->config_data_length);
412 res=-1;
413 }
414
415 if (num_func != es->num_functions) {
416 printk(KERN_ERR "eisa_enumerator: number of functions mismatch got %d, expected %d\n",
417 num_func, es->num_functions);
418 res=-2;
419 }
420
421 return res;
422
423 }
424
init_slot(int slot,struct eeprom_eisa_slot_info * es)425 static int init_slot(int slot, struct eeprom_eisa_slot_info *es)
426 {
427 unsigned int id;
428
429 char id_string[8];
430
431 if (!(es->slot_info&HPEE_SLOT_INFO_NO_READID)) {
432 /* try to read the id of the board in the slot */
433 id = le32_to_cpu(inl(SLOT2PORT(slot)+EPI));
434
435 if (0xffffffff == id) {
436 /* Maybe we didn't expect a card to be here... */
437 if (es->eisa_slot_id == 0xffffffff)
438 return -1;
439
440 /* this board is not here or it does not
441 * support readid
442 */
443 printk(KERN_ERR "EISA slot %d a configured board was not detected (",
444 slot);
445
446 print_eisa_id(id_string, es->eisa_slot_id);
447 printk(" expected %s)\n", id_string);
448
449 return -1;
450
451 }
452 if (es->eisa_slot_id != id) {
453 print_eisa_id(id_string, id);
454 printk(KERN_ERR "EISA slot %d id mismatch: got %s",
455 slot, id_string);
456
457 print_eisa_id(id_string, es->eisa_slot_id);
458 printk(" expected %s\n", id_string);
459
460 return -1;
461
462 }
463 }
464
465 /* now: we need to enable the board if
466 * it supports enabling and run through
467 * the port init sction if present
468 * and finally record any interrupt polarity
469 */
470 if (es->slot_features & HPEE_SLOT_FEATURES_ENABLE) {
471 /* enable board */
472 outb(0x01| inb(SLOT2PORT(slot)+EPI+4),
473 SLOT2PORT(slot)+EPI+4);
474 }
475
476 return 0;
477 }
478
479
eisa_enumerator(unsigned long eeprom_addr,struct resource * io_parent,struct resource * mem_parent)480 int eisa_enumerator(unsigned long eeprom_addr,
481 struct resource *io_parent, struct resource *mem_parent)
482 {
483 int i;
484 struct eeprom_header *eh;
485 static char eeprom_buf[HPEE_MAX_LENGTH];
486
487 for (i=0; i < HPEE_MAX_LENGTH; i++) {
488 eeprom_buf[i] = gsc_readb(eeprom_addr+i);
489 }
490
491 printk(KERN_INFO "Enumerating EISA bus\n");
492
493 eh = (struct eeprom_header*)(eeprom_buf);
494 for (i=0;i<eh->num_slots;i++) {
495 struct eeprom_eisa_slot_info *es;
496
497 es = (struct eeprom_eisa_slot_info*)
498 (&eeprom_buf[HPEE_SLOT_INFO(i)]);
499
500 if (-1==init_slot(i+1, es)) {
501 continue;
502 }
503
504 if (es->config_data_offset < HPEE_MAX_LENGTH) {
505 if (parse_slot_config(i+1, &eeprom_buf[es->config_data_offset],
506 es, io_parent, mem_parent)) {
507 return -1;
508 }
509 } else {
510 printk (KERN_WARNING "EISA EEPROM offset 0x%x out of range\n",es->config_data_offset);
511 return -1;
512 }
513 }
514 return eh->num_slots;
515 }
516
517