1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * PS3 gelic network driver.
4 *
5 * Copyright (C) 2007 Sony Computer Entertainment Inc.
6 * Copyright 2006, 2007 Sony Corporation
7 *
8 * This file is based on: spider_net.c
9 *
10 * (C) Copyright IBM Corp. 2005
11 *
12 * Authors : Utz Bacher <utz.bacher@de.ibm.com>
13 * Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
14 */
15
16 #undef DEBUG
17
18 #include <linux/interrupt.h>
19 #include <linux/kernel.h>
20 #include <linux/module.h>
21 #include <linux/slab.h>
22
23 #include <linux/etherdevice.h>
24 #include <linux/ethtool.h>
25 #include <linux/if_vlan.h>
26
27 #include <linux/in.h>
28 #include <linux/ip.h>
29 #include <linux/tcp.h>
30
31 #include <linux/dma-mapping.h>
32 #include <net/checksum.h>
33 #include <asm/firmware.h>
34 #include <asm/ps3.h>
35 #include <asm/lv1call.h>
36
37 #include "ps3_gelic_net.h"
38 #include "ps3_gelic_wireless.h"
39
40 #define DRV_NAME "Gelic Network Driver"
41 #define DRV_VERSION "2.0"
42
43 MODULE_AUTHOR("SCE Inc.");
44 MODULE_DESCRIPTION("Gelic Network driver");
45 MODULE_LICENSE("GPL");
46
47
48 /* set irq_mask */
gelic_card_set_irq_mask(struct gelic_card * card,u64 mask)49 int gelic_card_set_irq_mask(struct gelic_card *card, u64 mask)
50 {
51 int status;
52
53 status = lv1_net_set_interrupt_mask(bus_id(card), dev_id(card),
54 mask, 0);
55 if (status)
56 dev_info(ctodev(card),
57 "%s failed %d\n", __func__, status);
58 return status;
59 }
60
gelic_card_rx_irq_on(struct gelic_card * card)61 static void gelic_card_rx_irq_on(struct gelic_card *card)
62 {
63 card->irq_mask |= GELIC_CARD_RXINT;
64 gelic_card_set_irq_mask(card, card->irq_mask);
65 }
gelic_card_rx_irq_off(struct gelic_card * card)66 static void gelic_card_rx_irq_off(struct gelic_card *card)
67 {
68 card->irq_mask &= ~GELIC_CARD_RXINT;
69 gelic_card_set_irq_mask(card, card->irq_mask);
70 }
71
gelic_card_get_ether_port_status(struct gelic_card * card,int inform)72 static void gelic_card_get_ether_port_status(struct gelic_card *card,
73 int inform)
74 {
75 u64 v2;
76 struct net_device *ether_netdev;
77
78 lv1_net_control(bus_id(card), dev_id(card),
79 GELIC_LV1_GET_ETH_PORT_STATUS,
80 GELIC_LV1_VLAN_TX_ETHERNET_0, 0, 0,
81 &card->ether_port_status, &v2);
82
83 if (inform) {
84 ether_netdev = card->netdev[GELIC_PORT_ETHERNET_0];
85 if (card->ether_port_status & GELIC_LV1_ETHER_LINK_UP)
86 netif_carrier_on(ether_netdev);
87 else
88 netif_carrier_off(ether_netdev);
89 }
90 }
91
92 /**
93 * gelic_descr_get_status -- returns the status of a descriptor
94 * @descr: descriptor to look at
95 *
96 * returns the status as in the dmac_cmd_status field of the descriptor
97 */
98 static enum gelic_descr_dma_status
gelic_descr_get_status(struct gelic_descr * descr)99 gelic_descr_get_status(struct gelic_descr *descr)
100 {
101 return be32_to_cpu(descr->dmac_cmd_status) & GELIC_DESCR_DMA_STAT_MASK;
102 }
103
gelic_card_set_link_mode(struct gelic_card * card,int mode)104 static int gelic_card_set_link_mode(struct gelic_card *card, int mode)
105 {
106 int status;
107 u64 v1, v2;
108
109 status = lv1_net_control(bus_id(card), dev_id(card),
110 GELIC_LV1_SET_NEGOTIATION_MODE,
111 GELIC_LV1_PHY_ETHERNET_0, mode, 0, &v1, &v2);
112 if (status) {
113 pr_info("%s: failed setting negotiation mode %d\n", __func__,
114 status);
115 return -EBUSY;
116 }
117
118 card->link_mode = mode;
119 return 0;
120 }
121
122 /**
123 * gelic_card_disable_txdmac - disables the transmit DMA controller
124 * @card: card structure
125 *
126 * gelic_card_disable_txdmac terminates processing on the DMA controller by
127 * turing off DMA and issuing a force end
128 */
gelic_card_disable_txdmac(struct gelic_card * card)129 static void gelic_card_disable_txdmac(struct gelic_card *card)
130 {
131 int status;
132
133 /* this hvc blocks until the DMA in progress really stopped */
134 status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card));
135 if (status)
136 dev_err(ctodev(card),
137 "lv1_net_stop_tx_dma failed, status=%d\n", status);
138 }
139
140 /**
141 * gelic_card_enable_rxdmac - enables the receive DMA controller
142 * @card: card structure
143 *
144 * gelic_card_enable_rxdmac enables the DMA controller by setting RX_DMA_EN
145 * in the GDADMACCNTR register
146 */
gelic_card_enable_rxdmac(struct gelic_card * card)147 static void gelic_card_enable_rxdmac(struct gelic_card *card)
148 {
149 int status;
150
151 #ifdef DEBUG
152 if (gelic_descr_get_status(card->rx_chain.head) !=
153 GELIC_DESCR_DMA_CARDOWNED) {
154 printk(KERN_ERR "%s: status=%x\n", __func__,
155 be32_to_cpu(card->rx_chain.head->dmac_cmd_status));
156 printk(KERN_ERR "%s: nextphy=%x\n", __func__,
157 be32_to_cpu(card->rx_chain.head->next_descr_addr));
158 printk(KERN_ERR "%s: head=%p\n", __func__,
159 card->rx_chain.head);
160 }
161 #endif
162 status = lv1_net_start_rx_dma(bus_id(card), dev_id(card),
163 card->rx_chain.head->bus_addr, 0);
164 if (status)
165 dev_info(ctodev(card),
166 "lv1_net_start_rx_dma failed, status=%d\n", status);
167 }
168
169 /**
170 * gelic_card_disable_rxdmac - disables the receive DMA controller
171 * @card: card structure
172 *
173 * gelic_card_disable_rxdmac terminates processing on the DMA controller by
174 * turing off DMA and issuing a force end
175 */
gelic_card_disable_rxdmac(struct gelic_card * card)176 static void gelic_card_disable_rxdmac(struct gelic_card *card)
177 {
178 int status;
179
180 /* this hvc blocks until the DMA in progress really stopped */
181 status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card));
182 if (status)
183 dev_err(ctodev(card),
184 "lv1_net_stop_rx_dma failed, %d\n", status);
185 }
186
187 /**
188 * gelic_descr_set_status -- sets the status of a descriptor
189 * @descr: descriptor to change
190 * @status: status to set in the descriptor
191 *
192 * changes the status to the specified value. Doesn't change other bits
193 * in the status
194 */
gelic_descr_set_status(struct gelic_descr * descr,enum gelic_descr_dma_status status)195 static void gelic_descr_set_status(struct gelic_descr *descr,
196 enum gelic_descr_dma_status status)
197 {
198 descr->dmac_cmd_status = cpu_to_be32(status |
199 (be32_to_cpu(descr->dmac_cmd_status) &
200 ~GELIC_DESCR_DMA_STAT_MASK));
201 /*
202 * dma_cmd_status field is used to indicate whether the descriptor
203 * is valid or not.
204 * Usually caller of this function wants to inform that to the
205 * hardware, so we assure here the hardware sees the change.
206 */
207 wmb();
208 }
209
210 /**
211 * gelic_card_reset_chain - reset status of a descriptor chain
212 * @card: card structure
213 * @chain: address of chain
214 * @start_descr: address of descriptor array
215 *
216 * Reset the status of dma descriptors to ready state
217 * and re-initialize the hardware chain for later use
218 */
gelic_card_reset_chain(struct gelic_card * card,struct gelic_descr_chain * chain,struct gelic_descr * start_descr)219 static void gelic_card_reset_chain(struct gelic_card *card,
220 struct gelic_descr_chain *chain,
221 struct gelic_descr *start_descr)
222 {
223 struct gelic_descr *descr;
224
225 for (descr = start_descr; start_descr != descr->next; descr++) {
226 gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
227 descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
228 }
229
230 chain->head = start_descr;
231 chain->tail = (descr - 1);
232
233 (descr - 1)->next_descr_addr = 0;
234 }
235
gelic_card_up(struct gelic_card * card)236 void gelic_card_up(struct gelic_card *card)
237 {
238 pr_debug("%s: called\n", __func__);
239 mutex_lock(&card->updown_lock);
240 if (atomic_inc_return(&card->users) == 1) {
241 pr_debug("%s: real do\n", __func__);
242 /* enable irq */
243 gelic_card_set_irq_mask(card, card->irq_mask);
244 /* start rx */
245 gelic_card_enable_rxdmac(card);
246
247 napi_enable(&card->napi);
248 }
249 mutex_unlock(&card->updown_lock);
250 pr_debug("%s: done\n", __func__);
251 }
252
gelic_card_down(struct gelic_card * card)253 void gelic_card_down(struct gelic_card *card)
254 {
255 u64 mask;
256 pr_debug("%s: called\n", __func__);
257 mutex_lock(&card->updown_lock);
258 if (atomic_dec_if_positive(&card->users) == 0) {
259 pr_debug("%s: real do\n", __func__);
260 napi_disable(&card->napi);
261 /*
262 * Disable irq. Wireless interrupts will
263 * be disabled later if any
264 */
265 mask = card->irq_mask & (GELIC_CARD_WLAN_EVENT_RECEIVED |
266 GELIC_CARD_WLAN_COMMAND_COMPLETED);
267 gelic_card_set_irq_mask(card, mask);
268 /* stop rx */
269 gelic_card_disable_rxdmac(card);
270 gelic_card_reset_chain(card, &card->rx_chain,
271 card->descr + GELIC_NET_TX_DESCRIPTORS);
272 /* stop tx */
273 gelic_card_disable_txdmac(card);
274 }
275 mutex_unlock(&card->updown_lock);
276 pr_debug("%s: done\n", __func__);
277 }
278
279 /**
280 * gelic_card_free_chain - free descriptor chain
281 * @card: card structure
282 * @descr_in: address of desc
283 */
gelic_card_free_chain(struct gelic_card * card,struct gelic_descr * descr_in)284 static void gelic_card_free_chain(struct gelic_card *card,
285 struct gelic_descr *descr_in)
286 {
287 struct gelic_descr *descr;
288
289 for (descr = descr_in; descr && descr->bus_addr; descr = descr->next) {
290 dma_unmap_single(ctodev(card), descr->bus_addr,
291 GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL);
292 descr->bus_addr = 0;
293 }
294 }
295
296 /**
297 * gelic_card_init_chain - links descriptor chain
298 * @card: card structure
299 * @chain: address of chain
300 * @start_descr: address of descriptor array
301 * @no: number of descriptors
302 *
303 * we manage a circular list that mirrors the hardware structure,
304 * except that the hardware uses bus addresses.
305 *
306 * returns 0 on success, <0 on failure
307 */
gelic_card_init_chain(struct gelic_card * card,struct gelic_descr_chain * chain,struct gelic_descr * start_descr,int no)308 static int gelic_card_init_chain(struct gelic_card *card,
309 struct gelic_descr_chain *chain,
310 struct gelic_descr *start_descr, int no)
311 {
312 int i;
313 struct gelic_descr *descr;
314
315 descr = start_descr;
316 memset(descr, 0, sizeof(*descr) * no);
317
318 /* set up the hardware pointers in each descriptor */
319 for (i = 0; i < no; i++, descr++) {
320 dma_addr_t cpu_addr;
321
322 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
323
324 cpu_addr = dma_map_single(ctodev(card), descr,
325 GELIC_DESCR_SIZE, DMA_BIDIRECTIONAL);
326
327 if (dma_mapping_error(ctodev(card), cpu_addr))
328 goto iommu_error;
329
330 descr->bus_addr = cpu_to_be32(cpu_addr);
331 descr->next = descr + 1;
332 descr->prev = descr - 1;
333 }
334 /* make them as ring */
335 (descr - 1)->next = start_descr;
336 start_descr->prev = (descr - 1);
337
338 /* chain bus addr of hw descriptor */
339 descr = start_descr;
340 for (i = 0; i < no; i++, descr++) {
341 descr->next_descr_addr = cpu_to_be32(descr->next->bus_addr);
342 }
343
344 chain->head = start_descr;
345 chain->tail = start_descr;
346
347 /* do not chain last hw descriptor */
348 (descr - 1)->next_descr_addr = 0;
349
350 return 0;
351
352 iommu_error:
353 for (i--, descr--; 0 <= i; i--, descr--)
354 if (descr->bus_addr)
355 dma_unmap_single(ctodev(card), descr->bus_addr,
356 GELIC_DESCR_SIZE,
357 DMA_BIDIRECTIONAL);
358 return -ENOMEM;
359 }
360
361 /**
362 * gelic_descr_prepare_rx - reinitializes a rx descriptor
363 * @card: card structure
364 * @descr: descriptor to re-init
365 *
366 * return 0 on success, <0 on failure
367 *
368 * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
369 * Activate the descriptor state-wise
370 *
371 * Gelic RX sk_buffs must be aligned to GELIC_NET_RXBUF_ALIGN and the length
372 * must be a multiple of GELIC_NET_RXBUF_ALIGN.
373 */
gelic_descr_prepare_rx(struct gelic_card * card,struct gelic_descr * descr)374 static int gelic_descr_prepare_rx(struct gelic_card *card,
375 struct gelic_descr *descr)
376 {
377 static const unsigned int rx_skb_size =
378 ALIGN(GELIC_NET_MAX_FRAME, GELIC_NET_RXBUF_ALIGN) +
379 GELIC_NET_RXBUF_ALIGN - 1;
380 dma_addr_t cpu_addr;
381 int offset;
382
383 if (gelic_descr_get_status(descr) != GELIC_DESCR_DMA_NOT_IN_USE)
384 dev_info(ctodev(card), "%s: ERROR status\n", __func__);
385
386 descr->skb = netdev_alloc_skb(*card->netdev, rx_skb_size);
387 if (!descr->skb) {
388 descr->buf_addr = 0; /* tell DMAC don't touch memory */
389 return -ENOMEM;
390 }
391 descr->buf_size = cpu_to_be32(rx_skb_size);
392 descr->dmac_cmd_status = 0;
393 descr->result_size = 0;
394 descr->valid_size = 0;
395 descr->data_error = 0;
396
397 offset = ((unsigned long)descr->skb->data) &
398 (GELIC_NET_RXBUF_ALIGN - 1);
399 if (offset)
400 skb_reserve(descr->skb, GELIC_NET_RXBUF_ALIGN - offset);
401 /* io-mmu-map the skb */
402 cpu_addr = dma_map_single(ctodev(card), descr->skb->data,
403 GELIC_NET_MAX_FRAME, DMA_FROM_DEVICE);
404 descr->buf_addr = cpu_to_be32(cpu_addr);
405 if (dma_mapping_error(ctodev(card), cpu_addr)) {
406 dev_kfree_skb_any(descr->skb);
407 descr->skb = NULL;
408 dev_info(ctodev(card),
409 "%s:Could not iommu-map rx buffer\n", __func__);
410 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
411 return -ENOMEM;
412 } else {
413 gelic_descr_set_status(descr, GELIC_DESCR_DMA_CARDOWNED);
414 return 0;
415 }
416 }
417
418 /**
419 * gelic_card_release_rx_chain - free all skb of rx descr
420 * @card: card structure
421 *
422 */
gelic_card_release_rx_chain(struct gelic_card * card)423 static void gelic_card_release_rx_chain(struct gelic_card *card)
424 {
425 struct gelic_descr *descr = card->rx_chain.head;
426
427 do {
428 if (descr->skb) {
429 dma_unmap_single(ctodev(card),
430 be32_to_cpu(descr->buf_addr),
431 descr->skb->len,
432 DMA_FROM_DEVICE);
433 descr->buf_addr = 0;
434 dev_kfree_skb_any(descr->skb);
435 descr->skb = NULL;
436 gelic_descr_set_status(descr,
437 GELIC_DESCR_DMA_NOT_IN_USE);
438 }
439 descr = descr->next;
440 } while (descr != card->rx_chain.head);
441 }
442
443 /**
444 * gelic_card_fill_rx_chain - fills descriptors/skbs in the rx chains
445 * @card: card structure
446 *
447 * fills all descriptors in the rx chain: allocates skbs
448 * and iommu-maps them.
449 * returns 0 on success, < 0 on failure
450 */
gelic_card_fill_rx_chain(struct gelic_card * card)451 static int gelic_card_fill_rx_chain(struct gelic_card *card)
452 {
453 struct gelic_descr *descr = card->rx_chain.head;
454 int ret;
455
456 do {
457 if (!descr->skb) {
458 ret = gelic_descr_prepare_rx(card, descr);
459 if (ret)
460 goto rewind;
461 }
462 descr = descr->next;
463 } while (descr != card->rx_chain.head);
464
465 return 0;
466 rewind:
467 gelic_card_release_rx_chain(card);
468 return ret;
469 }
470
471 /**
472 * gelic_card_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
473 * @card: card structure
474 *
475 * returns 0 on success, < 0 on failure
476 */
gelic_card_alloc_rx_skbs(struct gelic_card * card)477 static int gelic_card_alloc_rx_skbs(struct gelic_card *card)
478 {
479 struct gelic_descr_chain *chain;
480 int ret;
481 chain = &card->rx_chain;
482 ret = gelic_card_fill_rx_chain(card);
483 chain->tail = card->rx_top->prev; /* point to the last */
484 return ret;
485 }
486
487 /**
488 * gelic_descr_release_tx - processes a used tx descriptor
489 * @card: card structure
490 * @descr: descriptor to release
491 *
492 * releases a used tx descriptor (unmapping, freeing of skb)
493 */
gelic_descr_release_tx(struct gelic_card * card,struct gelic_descr * descr)494 static void gelic_descr_release_tx(struct gelic_card *card,
495 struct gelic_descr *descr)
496 {
497 struct sk_buff *skb = descr->skb;
498
499 BUG_ON(!(be32_to_cpu(descr->data_status) & GELIC_DESCR_TX_TAIL));
500
501 dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), skb->len,
502 DMA_TO_DEVICE);
503 dev_kfree_skb_any(skb);
504
505 descr->buf_addr = 0;
506 descr->buf_size = 0;
507 descr->next_descr_addr = 0;
508 descr->result_size = 0;
509 descr->valid_size = 0;
510 descr->data_status = 0;
511 descr->data_error = 0;
512 descr->skb = NULL;
513
514 /* set descr status */
515 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
516 }
517
gelic_card_stop_queues(struct gelic_card * card)518 static void gelic_card_stop_queues(struct gelic_card *card)
519 {
520 netif_stop_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
521
522 if (card->netdev[GELIC_PORT_WIRELESS])
523 netif_stop_queue(card->netdev[GELIC_PORT_WIRELESS]);
524 }
gelic_card_wake_queues(struct gelic_card * card)525 static void gelic_card_wake_queues(struct gelic_card *card)
526 {
527 netif_wake_queue(card->netdev[GELIC_PORT_ETHERNET_0]);
528
529 if (card->netdev[GELIC_PORT_WIRELESS])
530 netif_wake_queue(card->netdev[GELIC_PORT_WIRELESS]);
531 }
532 /**
533 * gelic_card_release_tx_chain - processes sent tx descriptors
534 * @card: adapter structure
535 * @stop: net_stop sequence
536 *
537 * releases the tx descriptors that gelic has finished with
538 */
gelic_card_release_tx_chain(struct gelic_card * card,int stop)539 static void gelic_card_release_tx_chain(struct gelic_card *card, int stop)
540 {
541 struct gelic_descr_chain *tx_chain;
542 enum gelic_descr_dma_status status;
543 struct net_device *netdev;
544 int release = 0;
545
546 for (tx_chain = &card->tx_chain;
547 tx_chain->head != tx_chain->tail && tx_chain->tail;
548 tx_chain->tail = tx_chain->tail->next) {
549 status = gelic_descr_get_status(tx_chain->tail);
550 netdev = tx_chain->tail->skb->dev;
551 switch (status) {
552 case GELIC_DESCR_DMA_RESPONSE_ERROR:
553 case GELIC_DESCR_DMA_PROTECTION_ERROR:
554 case GELIC_DESCR_DMA_FORCE_END:
555 if (printk_ratelimit())
556 dev_info(ctodev(card),
557 "%s: forcing end of tx descriptor " \
558 "with status %x\n",
559 __func__, status);
560 netdev->stats.tx_dropped++;
561 break;
562
563 case GELIC_DESCR_DMA_COMPLETE:
564 if (tx_chain->tail->skb) {
565 netdev->stats.tx_packets++;
566 netdev->stats.tx_bytes +=
567 tx_chain->tail->skb->len;
568 }
569 break;
570
571 case GELIC_DESCR_DMA_CARDOWNED:
572 /* pending tx request */
573 default:
574 /* any other value (== GELIC_DESCR_DMA_NOT_IN_USE) */
575 if (!stop)
576 goto out;
577 }
578 gelic_descr_release_tx(card, tx_chain->tail);
579 release ++;
580 }
581 out:
582 if (!stop && release)
583 gelic_card_wake_queues(card);
584 }
585
586 /**
587 * gelic_net_set_multi - sets multicast addresses and promisc flags
588 * @netdev: interface device structure
589 *
590 * gelic_net_set_multi configures multicast addresses as needed for the
591 * netdev interface. It also sets up multicast, allmulti and promisc
592 * flags appropriately
593 */
gelic_net_set_multi(struct net_device * netdev)594 void gelic_net_set_multi(struct net_device *netdev)
595 {
596 struct gelic_card *card = netdev_card(netdev);
597 struct netdev_hw_addr *ha;
598 unsigned int i;
599 uint8_t *p;
600 u64 addr;
601 int status;
602
603 /* clear all multicast address */
604 status = lv1_net_remove_multicast_address(bus_id(card), dev_id(card),
605 0, 1);
606 if (status)
607 dev_err(ctodev(card),
608 "lv1_net_remove_multicast_address failed %d\n",
609 status);
610 /* set broadcast address */
611 status = lv1_net_add_multicast_address(bus_id(card), dev_id(card),
612 GELIC_NET_BROADCAST_ADDR, 0);
613 if (status)
614 dev_err(ctodev(card),
615 "lv1_net_add_multicast_address failed, %d\n",
616 status);
617
618 if ((netdev->flags & IFF_ALLMULTI) ||
619 (netdev_mc_count(netdev) > GELIC_NET_MC_COUNT_MAX)) {
620 status = lv1_net_add_multicast_address(bus_id(card),
621 dev_id(card),
622 0, 1);
623 if (status)
624 dev_err(ctodev(card),
625 "lv1_net_add_multicast_address failed, %d\n",
626 status);
627 return;
628 }
629
630 /* set multicast addresses */
631 netdev_for_each_mc_addr(ha, netdev) {
632 addr = 0;
633 p = ha->addr;
634 for (i = 0; i < ETH_ALEN; i++) {
635 addr <<= 8;
636 addr |= *p++;
637 }
638 status = lv1_net_add_multicast_address(bus_id(card),
639 dev_id(card),
640 addr, 0);
641 if (status)
642 dev_err(ctodev(card),
643 "lv1_net_add_multicast_address failed, %d\n",
644 status);
645 }
646 }
647
648 /**
649 * gelic_net_stop - called upon ifconfig down
650 * @netdev: interface device structure
651 *
652 * always returns 0
653 */
gelic_net_stop(struct net_device * netdev)654 int gelic_net_stop(struct net_device *netdev)
655 {
656 struct gelic_card *card;
657
658 pr_debug("%s: start\n", __func__);
659
660 netif_stop_queue(netdev);
661 netif_carrier_off(netdev);
662
663 card = netdev_card(netdev);
664 gelic_card_down(card);
665
666 pr_debug("%s: done\n", __func__);
667 return 0;
668 }
669
670 /**
671 * gelic_card_get_next_tx_descr - returns the next available tx descriptor
672 * @card: device structure to get descriptor from
673 *
674 * returns the address of the next descriptor, or NULL if not available.
675 */
676 static struct gelic_descr *
gelic_card_get_next_tx_descr(struct gelic_card * card)677 gelic_card_get_next_tx_descr(struct gelic_card *card)
678 {
679 if (!card->tx_chain.head)
680 return NULL;
681 /* see if the next descriptor is free */
682 if (card->tx_chain.tail != card->tx_chain.head->next &&
683 gelic_descr_get_status(card->tx_chain.head) ==
684 GELIC_DESCR_DMA_NOT_IN_USE)
685 return card->tx_chain.head;
686 else
687 return NULL;
688
689 }
690
691 /**
692 * gelic_net_set_txdescr_cmdstat - sets the tx descriptor command field
693 * @descr: descriptor structure to fill out
694 * @skb: packet to consider
695 *
696 * fills out the command and status field of the descriptor structure,
697 * depending on hardware checksum settings. This function assumes a wmb()
698 * has executed before.
699 */
gelic_descr_set_tx_cmdstat(struct gelic_descr * descr,struct sk_buff * skb)700 static void gelic_descr_set_tx_cmdstat(struct gelic_descr *descr,
701 struct sk_buff *skb)
702 {
703 if (skb->ip_summed != CHECKSUM_PARTIAL)
704 descr->dmac_cmd_status =
705 cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
706 GELIC_DESCR_TX_DMA_FRAME_TAIL);
707 else {
708 /* is packet ip?
709 * if yes: tcp? udp? */
710 if (skb->protocol == htons(ETH_P_IP)) {
711 if (ip_hdr(skb)->protocol == IPPROTO_TCP)
712 descr->dmac_cmd_status =
713 cpu_to_be32(GELIC_DESCR_DMA_CMD_TCP_CHKSUM |
714 GELIC_DESCR_TX_DMA_FRAME_TAIL);
715
716 else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
717 descr->dmac_cmd_status =
718 cpu_to_be32(GELIC_DESCR_DMA_CMD_UDP_CHKSUM |
719 GELIC_DESCR_TX_DMA_FRAME_TAIL);
720 else /*
721 * the stack should checksum non-tcp and non-udp
722 * packets on his own: NETIF_F_IP_CSUM
723 */
724 descr->dmac_cmd_status =
725 cpu_to_be32(GELIC_DESCR_DMA_CMD_NO_CHKSUM |
726 GELIC_DESCR_TX_DMA_FRAME_TAIL);
727 }
728 }
729 }
730
gelic_put_vlan_tag(struct sk_buff * skb,unsigned short tag)731 static struct sk_buff *gelic_put_vlan_tag(struct sk_buff *skb,
732 unsigned short tag)
733 {
734 struct vlan_ethhdr *veth;
735 static unsigned int c;
736
737 if (skb_headroom(skb) < VLAN_HLEN) {
738 struct sk_buff *sk_tmp = skb;
739 pr_debug("%s: hd=%d c=%ud\n", __func__, skb_headroom(skb), c);
740 skb = skb_realloc_headroom(sk_tmp, VLAN_HLEN);
741 if (!skb)
742 return NULL;
743 dev_kfree_skb_any(sk_tmp);
744 }
745 veth = skb_push(skb, VLAN_HLEN);
746
747 /* Move the mac addresses to the top of buffer */
748 memmove(skb->data, skb->data + VLAN_HLEN, 2 * ETH_ALEN);
749
750 veth->h_vlan_proto = cpu_to_be16(ETH_P_8021Q);
751 veth->h_vlan_TCI = htons(tag);
752
753 return skb;
754 }
755
756 /**
757 * gelic_descr_prepare_tx - setup a descriptor for sending packets
758 * @card: card structure
759 * @descr: descriptor structure
760 * @skb: packet to use
761 *
762 * returns 0 on success, <0 on failure.
763 *
764 */
gelic_descr_prepare_tx(struct gelic_card * card,struct gelic_descr * descr,struct sk_buff * skb)765 static int gelic_descr_prepare_tx(struct gelic_card *card,
766 struct gelic_descr *descr,
767 struct sk_buff *skb)
768 {
769 dma_addr_t buf;
770
771 if (card->vlan_required) {
772 struct sk_buff *skb_tmp;
773 enum gelic_port_type type;
774
775 type = netdev_port(skb->dev)->type;
776 skb_tmp = gelic_put_vlan_tag(skb,
777 card->vlan[type].tx);
778 if (!skb_tmp)
779 return -ENOMEM;
780 skb = skb_tmp;
781 }
782
783 buf = dma_map_single(ctodev(card), skb->data, skb->len, DMA_TO_DEVICE);
784
785 if (dma_mapping_error(ctodev(card), buf)) {
786 dev_err(ctodev(card),
787 "dma map 2 failed (%p, %i). Dropping packet\n",
788 skb->data, skb->len);
789 return -ENOMEM;
790 }
791
792 descr->buf_addr = cpu_to_be32(buf);
793 descr->buf_size = cpu_to_be32(skb->len);
794 descr->skb = skb;
795 descr->data_status = 0;
796 descr->next_descr_addr = 0; /* terminate hw descr */
797 gelic_descr_set_tx_cmdstat(descr, skb);
798
799 /* bump free descriptor pointer */
800 card->tx_chain.head = descr->next;
801 return 0;
802 }
803
804 /**
805 * gelic_card_kick_txdma - enables TX DMA processing
806 * @card: card structure
807 * @descr: descriptor address to enable TX processing at
808 *
809 */
gelic_card_kick_txdma(struct gelic_card * card,struct gelic_descr * descr)810 static int gelic_card_kick_txdma(struct gelic_card *card,
811 struct gelic_descr *descr)
812 {
813 int status = 0;
814
815 if (card->tx_dma_progress)
816 return 0;
817
818 if (gelic_descr_get_status(descr) == GELIC_DESCR_DMA_CARDOWNED) {
819 card->tx_dma_progress = 1;
820 status = lv1_net_start_tx_dma(bus_id(card), dev_id(card),
821 descr->bus_addr, 0);
822 if (status) {
823 card->tx_dma_progress = 0;
824 dev_info(ctodev(card), "lv1_net_start_txdma failed," \
825 "status=%d\n", status);
826 }
827 }
828 return status;
829 }
830
831 /**
832 * gelic_net_xmit - transmits a frame over the device
833 * @skb: packet to send out
834 * @netdev: interface device structure
835 *
836 * returns NETDEV_TX_OK on success, NETDEV_TX_BUSY on failure
837 */
gelic_net_xmit(struct sk_buff * skb,struct net_device * netdev)838 netdev_tx_t gelic_net_xmit(struct sk_buff *skb, struct net_device *netdev)
839 {
840 struct gelic_card *card = netdev_card(netdev);
841 struct gelic_descr *descr;
842 int result;
843 unsigned long flags;
844
845 spin_lock_irqsave(&card->tx_lock, flags);
846
847 gelic_card_release_tx_chain(card, 0);
848
849 descr = gelic_card_get_next_tx_descr(card);
850 if (!descr) {
851 /*
852 * no more descriptors free
853 */
854 gelic_card_stop_queues(card);
855 spin_unlock_irqrestore(&card->tx_lock, flags);
856 return NETDEV_TX_BUSY;
857 }
858
859 result = gelic_descr_prepare_tx(card, descr, skb);
860 if (result) {
861 /*
862 * DMA map failed. As chances are that failure
863 * would continue, just release skb and return
864 */
865 netdev->stats.tx_dropped++;
866 dev_kfree_skb_any(skb);
867 spin_unlock_irqrestore(&card->tx_lock, flags);
868 return NETDEV_TX_OK;
869 }
870 /*
871 * link this prepared descriptor to previous one
872 * to achieve high performance
873 */
874 descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
875 /*
876 * as hardware descriptor is modified in the above lines,
877 * ensure that the hardware sees it
878 */
879 wmb();
880 if (gelic_card_kick_txdma(card, descr)) {
881 /*
882 * kick failed.
883 * release descriptor which was just prepared
884 */
885 netdev->stats.tx_dropped++;
886 /* don't trigger BUG_ON() in gelic_descr_release_tx */
887 descr->data_status = cpu_to_be32(GELIC_DESCR_TX_TAIL);
888 gelic_descr_release_tx(card, descr);
889 /* reset head */
890 card->tx_chain.head = descr;
891 /* reset hw termination */
892 descr->prev->next_descr_addr = 0;
893 dev_info(ctodev(card), "%s: kick failure\n", __func__);
894 }
895
896 spin_unlock_irqrestore(&card->tx_lock, flags);
897 return NETDEV_TX_OK;
898 }
899
900 /**
901 * gelic_net_pass_skb_up - takes an skb from a descriptor and passes it on
902 * @descr: descriptor to process
903 * @card: card structure
904 * @netdev: net_device structure to be passed packet
905 *
906 * iommu-unmaps the skb, fills out skb structure and passes the data to the
907 * stack. The descriptor state is not changed.
908 */
gelic_net_pass_skb_up(struct gelic_descr * descr,struct gelic_card * card,struct net_device * netdev)909 static void gelic_net_pass_skb_up(struct gelic_descr *descr,
910 struct gelic_card *card,
911 struct net_device *netdev)
912
913 {
914 struct sk_buff *skb = descr->skb;
915 u32 data_status, data_error;
916
917 data_status = be32_to_cpu(descr->data_status);
918 data_error = be32_to_cpu(descr->data_error);
919 /* unmap skb buffer */
920 dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr),
921 GELIC_NET_MAX_FRAME,
922 DMA_FROM_DEVICE);
923
924 skb_put(skb, be32_to_cpu(descr->valid_size)?
925 be32_to_cpu(descr->valid_size) :
926 be32_to_cpu(descr->result_size));
927 if (!descr->valid_size)
928 dev_info(ctodev(card), "buffer full %x %x %x\n",
929 be32_to_cpu(descr->result_size),
930 be32_to_cpu(descr->buf_size),
931 be32_to_cpu(descr->dmac_cmd_status));
932
933 descr->skb = NULL;
934 /*
935 * the card put 2 bytes vlan tag in front
936 * of the ethernet frame
937 */
938 skb_pull(skb, 2);
939 skb->protocol = eth_type_trans(skb, netdev);
940
941 /* checksum offload */
942 if (netdev->features & NETIF_F_RXCSUM) {
943 if ((data_status & GELIC_DESCR_DATA_STATUS_CHK_MASK) &&
944 (!(data_error & GELIC_DESCR_DATA_ERROR_CHK_MASK)))
945 skb->ip_summed = CHECKSUM_UNNECESSARY;
946 else
947 skb_checksum_none_assert(skb);
948 } else
949 skb_checksum_none_assert(skb);
950
951 /* update netdevice statistics */
952 netdev->stats.rx_packets++;
953 netdev->stats.rx_bytes += skb->len;
954
955 /* pass skb up to stack */
956 netif_receive_skb(skb);
957 }
958
959 /**
960 * gelic_card_decode_one_descr - processes an rx descriptor
961 * @card: card structure
962 *
963 * returns 1 if a packet has been sent to the stack, otherwise 0
964 *
965 * processes an rx descriptor by iommu-unmapping the data buffer and passing
966 * the packet up to the stack
967 */
gelic_card_decode_one_descr(struct gelic_card * card)968 static int gelic_card_decode_one_descr(struct gelic_card *card)
969 {
970 enum gelic_descr_dma_status status;
971 struct gelic_descr_chain *chain = &card->rx_chain;
972 struct gelic_descr *descr = chain->head;
973 struct net_device *netdev = NULL;
974 int dmac_chain_ended;
975
976 status = gelic_descr_get_status(descr);
977
978 if (status == GELIC_DESCR_DMA_CARDOWNED)
979 return 0;
980
981 if (status == GELIC_DESCR_DMA_NOT_IN_USE) {
982 dev_dbg(ctodev(card), "dormant descr? %p\n", descr);
983 return 0;
984 }
985
986 /* netdevice select */
987 if (card->vlan_required) {
988 unsigned int i;
989 u16 vid;
990 vid = *(u16 *)(descr->skb->data) & VLAN_VID_MASK;
991 for (i = 0; i < GELIC_PORT_MAX; i++) {
992 if (card->vlan[i].rx == vid) {
993 netdev = card->netdev[i];
994 break;
995 }
996 }
997 if (GELIC_PORT_MAX <= i) {
998 pr_info("%s: unknown packet vid=%x\n", __func__, vid);
999 goto refill;
1000 }
1001 } else
1002 netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1003
1004 if ((status == GELIC_DESCR_DMA_RESPONSE_ERROR) ||
1005 (status == GELIC_DESCR_DMA_PROTECTION_ERROR) ||
1006 (status == GELIC_DESCR_DMA_FORCE_END)) {
1007 dev_info(ctodev(card), "dropping RX descriptor with state %x\n",
1008 status);
1009 netdev->stats.rx_dropped++;
1010 goto refill;
1011 }
1012
1013 if (status == GELIC_DESCR_DMA_BUFFER_FULL) {
1014 /*
1015 * Buffer full would occur if and only if
1016 * the frame length was longer than the size of this
1017 * descriptor's buffer. If the frame length was equal
1018 * to or shorter than buffer'size, FRAME_END condition
1019 * would occur.
1020 * Anyway this frame was longer than the MTU,
1021 * just drop it.
1022 */
1023 dev_info(ctodev(card), "overlength frame\n");
1024 goto refill;
1025 }
1026 /*
1027 * descriptors any other than FRAME_END here should
1028 * be treated as error.
1029 */
1030 if (status != GELIC_DESCR_DMA_FRAME_END) {
1031 dev_dbg(ctodev(card), "RX descriptor with state %x\n",
1032 status);
1033 goto refill;
1034 }
1035
1036 /* ok, we've got a packet in descr */
1037 gelic_net_pass_skb_up(descr, card, netdev);
1038 refill:
1039
1040 /* is the current descriptor terminated with next_descr == NULL? */
1041 dmac_chain_ended =
1042 be32_to_cpu(descr->dmac_cmd_status) &
1043 GELIC_DESCR_RX_DMA_CHAIN_END;
1044 /*
1045 * So that always DMAC can see the end
1046 * of the descriptor chain to avoid
1047 * from unwanted DMAC overrun.
1048 */
1049 descr->next_descr_addr = 0;
1050
1051 /* change the descriptor state: */
1052 gelic_descr_set_status(descr, GELIC_DESCR_DMA_NOT_IN_USE);
1053
1054 /*
1055 * this call can fail, but for now, just leave this
1056 * descriptor without skb
1057 */
1058 gelic_descr_prepare_rx(card, descr);
1059
1060 chain->tail = descr;
1061 chain->head = descr->next;
1062
1063 /*
1064 * Set this descriptor the end of the chain.
1065 */
1066 descr->prev->next_descr_addr = cpu_to_be32(descr->bus_addr);
1067
1068 /*
1069 * If dmac chain was met, DMAC stopped.
1070 * thus re-enable it
1071 */
1072
1073 if (dmac_chain_ended)
1074 gelic_card_enable_rxdmac(card);
1075
1076 return 1;
1077 }
1078
1079 /**
1080 * gelic_net_poll - NAPI poll function called by the stack to return packets
1081 * @napi: napi structure
1082 * @budget: number of packets we can pass to the stack at most
1083 *
1084 * returns the number of the processed packets
1085 *
1086 */
gelic_net_poll(struct napi_struct * napi,int budget)1087 static int gelic_net_poll(struct napi_struct *napi, int budget)
1088 {
1089 struct gelic_card *card = container_of(napi, struct gelic_card, napi);
1090 int packets_done = 0;
1091
1092 while (packets_done < budget) {
1093 if (!gelic_card_decode_one_descr(card))
1094 break;
1095
1096 packets_done++;
1097 }
1098
1099 if (packets_done < budget) {
1100 napi_complete_done(napi, packets_done);
1101 gelic_card_rx_irq_on(card);
1102 }
1103 return packets_done;
1104 }
1105
1106 /*
1107 * gelic_card_interrupt - event handler for gelic_net
1108 */
gelic_card_interrupt(int irq,void * ptr)1109 static irqreturn_t gelic_card_interrupt(int irq, void *ptr)
1110 {
1111 unsigned long flags;
1112 struct gelic_card *card = ptr;
1113 u64 status;
1114
1115 status = card->irq_status;
1116
1117 if (!status)
1118 return IRQ_NONE;
1119
1120 status &= card->irq_mask;
1121
1122 if (status & GELIC_CARD_RXINT) {
1123 gelic_card_rx_irq_off(card);
1124 napi_schedule(&card->napi);
1125 }
1126
1127 if (status & GELIC_CARD_TXINT) {
1128 spin_lock_irqsave(&card->tx_lock, flags);
1129 card->tx_dma_progress = 0;
1130 gelic_card_release_tx_chain(card, 0);
1131 /* kick outstanding tx descriptor if any */
1132 gelic_card_kick_txdma(card, card->tx_chain.tail);
1133 spin_unlock_irqrestore(&card->tx_lock, flags);
1134 }
1135
1136 /* ether port status changed */
1137 if (status & GELIC_CARD_PORT_STATUS_CHANGED)
1138 gelic_card_get_ether_port_status(card, 1);
1139
1140 #ifdef CONFIG_GELIC_WIRELESS
1141 if (status & (GELIC_CARD_WLAN_EVENT_RECEIVED |
1142 GELIC_CARD_WLAN_COMMAND_COMPLETED))
1143 gelic_wl_interrupt(card->netdev[GELIC_PORT_WIRELESS], status);
1144 #endif
1145
1146 return IRQ_HANDLED;
1147 }
1148
1149 #ifdef CONFIG_NET_POLL_CONTROLLER
1150 /**
1151 * gelic_net_poll_controller - artificial interrupt for netconsole etc.
1152 * @netdev: interface device structure
1153 *
1154 * see Documentation/networking/netconsole.rst
1155 */
gelic_net_poll_controller(struct net_device * netdev)1156 void gelic_net_poll_controller(struct net_device *netdev)
1157 {
1158 struct gelic_card *card = netdev_card(netdev);
1159
1160 gelic_card_set_irq_mask(card, 0);
1161 gelic_card_interrupt(netdev->irq, netdev);
1162 gelic_card_set_irq_mask(card, card->irq_mask);
1163 }
1164 #endif /* CONFIG_NET_POLL_CONTROLLER */
1165
1166 /**
1167 * gelic_net_open - called upon ifconfig up
1168 * @netdev: interface device structure
1169 *
1170 * returns 0 on success, <0 on failure
1171 *
1172 * gelic_net_open allocates all the descriptors and memory needed for
1173 * operation, sets up multicast list and enables interrupts
1174 */
gelic_net_open(struct net_device * netdev)1175 int gelic_net_open(struct net_device *netdev)
1176 {
1177 struct gelic_card *card = netdev_card(netdev);
1178
1179 dev_dbg(ctodev(card), " -> %s %p\n", __func__, netdev);
1180
1181 gelic_card_up(card);
1182
1183 netif_start_queue(netdev);
1184 gelic_card_get_ether_port_status(card, 1);
1185
1186 dev_dbg(ctodev(card), " <- %s\n", __func__);
1187 return 0;
1188 }
1189
gelic_net_get_drvinfo(struct net_device * netdev,struct ethtool_drvinfo * info)1190 void gelic_net_get_drvinfo(struct net_device *netdev,
1191 struct ethtool_drvinfo *info)
1192 {
1193 strscpy(info->driver, DRV_NAME, sizeof(info->driver));
1194 strscpy(info->version, DRV_VERSION, sizeof(info->version));
1195 }
1196
gelic_ether_get_link_ksettings(struct net_device * netdev,struct ethtool_link_ksettings * cmd)1197 static int gelic_ether_get_link_ksettings(struct net_device *netdev,
1198 struct ethtool_link_ksettings *cmd)
1199 {
1200 struct gelic_card *card = netdev_card(netdev);
1201 u32 supported, advertising;
1202
1203 gelic_card_get_ether_port_status(card, 0);
1204
1205 if (card->ether_port_status & GELIC_LV1_ETHER_FULL_DUPLEX)
1206 cmd->base.duplex = DUPLEX_FULL;
1207 else
1208 cmd->base.duplex = DUPLEX_HALF;
1209
1210 switch (card->ether_port_status & GELIC_LV1_ETHER_SPEED_MASK) {
1211 case GELIC_LV1_ETHER_SPEED_10:
1212 cmd->base.speed = SPEED_10;
1213 break;
1214 case GELIC_LV1_ETHER_SPEED_100:
1215 cmd->base.speed = SPEED_100;
1216 break;
1217 case GELIC_LV1_ETHER_SPEED_1000:
1218 cmd->base.speed = SPEED_1000;
1219 break;
1220 default:
1221 pr_info("%s: speed unknown\n", __func__);
1222 cmd->base.speed = SPEED_10;
1223 break;
1224 }
1225
1226 supported = SUPPORTED_TP | SUPPORTED_Autoneg |
1227 SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
1228 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
1229 SUPPORTED_1000baseT_Full;
1230 advertising = supported;
1231 if (card->link_mode & GELIC_LV1_ETHER_AUTO_NEG) {
1232 cmd->base.autoneg = AUTONEG_ENABLE;
1233 } else {
1234 cmd->base.autoneg = AUTONEG_DISABLE;
1235 advertising &= ~ADVERTISED_Autoneg;
1236 }
1237 cmd->base.port = PORT_TP;
1238
1239 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
1240 supported);
1241 ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
1242 advertising);
1243
1244 return 0;
1245 }
1246
1247 static int
gelic_ether_set_link_ksettings(struct net_device * netdev,const struct ethtool_link_ksettings * cmd)1248 gelic_ether_set_link_ksettings(struct net_device *netdev,
1249 const struct ethtool_link_ksettings *cmd)
1250 {
1251 struct gelic_card *card = netdev_card(netdev);
1252 u64 mode;
1253 int ret;
1254
1255 if (cmd->base.autoneg == AUTONEG_ENABLE) {
1256 mode = GELIC_LV1_ETHER_AUTO_NEG;
1257 } else {
1258 switch (cmd->base.speed) {
1259 case SPEED_10:
1260 mode = GELIC_LV1_ETHER_SPEED_10;
1261 break;
1262 case SPEED_100:
1263 mode = GELIC_LV1_ETHER_SPEED_100;
1264 break;
1265 case SPEED_1000:
1266 mode = GELIC_LV1_ETHER_SPEED_1000;
1267 break;
1268 default:
1269 return -EINVAL;
1270 }
1271 if (cmd->base.duplex == DUPLEX_FULL) {
1272 mode |= GELIC_LV1_ETHER_FULL_DUPLEX;
1273 } else if (cmd->base.speed == SPEED_1000) {
1274 pr_info("1000 half duplex is not supported.\n");
1275 return -EINVAL;
1276 }
1277 }
1278
1279 ret = gelic_card_set_link_mode(card, mode);
1280
1281 if (ret)
1282 return ret;
1283
1284 return 0;
1285 }
1286
gelic_net_get_wol(struct net_device * netdev,struct ethtool_wolinfo * wol)1287 static void gelic_net_get_wol(struct net_device *netdev,
1288 struct ethtool_wolinfo *wol)
1289 {
1290 if (0 <= ps3_compare_firmware_version(2, 2, 0))
1291 wol->supported = WAKE_MAGIC;
1292 else
1293 wol->supported = 0;
1294
1295 wol->wolopts = ps3_sys_manager_get_wol() ? wol->supported : 0;
1296 memset(&wol->sopass, 0, sizeof(wol->sopass));
1297 }
gelic_net_set_wol(struct net_device * netdev,struct ethtool_wolinfo * wol)1298 static int gelic_net_set_wol(struct net_device *netdev,
1299 struct ethtool_wolinfo *wol)
1300 {
1301 int status;
1302 struct gelic_card *card;
1303 u64 v1, v2;
1304
1305 if (ps3_compare_firmware_version(2, 2, 0) < 0 ||
1306 !capable(CAP_NET_ADMIN))
1307 return -EPERM;
1308
1309 if (wol->wolopts & ~WAKE_MAGIC)
1310 return -EINVAL;
1311
1312 card = netdev_card(netdev);
1313 if (wol->wolopts & WAKE_MAGIC) {
1314 status = lv1_net_control(bus_id(card), dev_id(card),
1315 GELIC_LV1_SET_WOL,
1316 GELIC_LV1_WOL_MAGIC_PACKET,
1317 0, GELIC_LV1_WOL_MP_ENABLE,
1318 &v1, &v2);
1319 if (status) {
1320 pr_info("%s: enabling WOL failed %d\n", __func__,
1321 status);
1322 status = -EIO;
1323 goto done;
1324 }
1325 status = lv1_net_control(bus_id(card), dev_id(card),
1326 GELIC_LV1_SET_WOL,
1327 GELIC_LV1_WOL_ADD_MATCH_ADDR,
1328 0, GELIC_LV1_WOL_MATCH_ALL,
1329 &v1, &v2);
1330 if (!status)
1331 ps3_sys_manager_set_wol(1);
1332 else {
1333 pr_info("%s: enabling WOL filter failed %d\n",
1334 __func__, status);
1335 status = -EIO;
1336 }
1337 } else {
1338 status = lv1_net_control(bus_id(card), dev_id(card),
1339 GELIC_LV1_SET_WOL,
1340 GELIC_LV1_WOL_MAGIC_PACKET,
1341 0, GELIC_LV1_WOL_MP_DISABLE,
1342 &v1, &v2);
1343 if (status) {
1344 pr_info("%s: disabling WOL failed %d\n", __func__,
1345 status);
1346 status = -EIO;
1347 goto done;
1348 }
1349 status = lv1_net_control(bus_id(card), dev_id(card),
1350 GELIC_LV1_SET_WOL,
1351 GELIC_LV1_WOL_DELETE_MATCH_ADDR,
1352 0, GELIC_LV1_WOL_MATCH_ALL,
1353 &v1, &v2);
1354 if (!status)
1355 ps3_sys_manager_set_wol(0);
1356 else {
1357 pr_info("%s: removing WOL filter failed %d\n",
1358 __func__, status);
1359 status = -EIO;
1360 }
1361 }
1362 done:
1363 return status;
1364 }
1365
1366 static const struct ethtool_ops gelic_ether_ethtool_ops = {
1367 .get_drvinfo = gelic_net_get_drvinfo,
1368 .get_link = ethtool_op_get_link,
1369 .get_wol = gelic_net_get_wol,
1370 .set_wol = gelic_net_set_wol,
1371 .get_link_ksettings = gelic_ether_get_link_ksettings,
1372 .set_link_ksettings = gelic_ether_set_link_ksettings,
1373 };
1374
1375 /**
1376 * gelic_net_tx_timeout_task - task scheduled by the watchdog timeout
1377 * function (to be called not under interrupt status)
1378 * @work: work is context of tx timout task
1379 *
1380 * called as task when tx hangs, resets interface (if interface is up)
1381 */
gelic_net_tx_timeout_task(struct work_struct * work)1382 static void gelic_net_tx_timeout_task(struct work_struct *work)
1383 {
1384 struct gelic_card *card =
1385 container_of(work, struct gelic_card, tx_timeout_task);
1386 struct net_device *netdev = card->netdev[GELIC_PORT_ETHERNET_0];
1387
1388 dev_info(ctodev(card), "%s:Timed out. Restarting...\n", __func__);
1389
1390 if (!(netdev->flags & IFF_UP))
1391 goto out;
1392
1393 netif_device_detach(netdev);
1394 gelic_net_stop(netdev);
1395
1396 gelic_net_open(netdev);
1397 netif_device_attach(netdev);
1398
1399 out:
1400 atomic_dec(&card->tx_timeout_task_counter);
1401 }
1402
1403 /**
1404 * gelic_net_tx_timeout - called when the tx timeout watchdog kicks in.
1405 * @netdev: interface device structure
1406 * @txqueue: unused
1407 *
1408 * called, if tx hangs. Schedules a task that resets the interface
1409 */
gelic_net_tx_timeout(struct net_device * netdev,unsigned int txqueue)1410 void gelic_net_tx_timeout(struct net_device *netdev, unsigned int txqueue)
1411 {
1412 struct gelic_card *card;
1413
1414 card = netdev_card(netdev);
1415 atomic_inc(&card->tx_timeout_task_counter);
1416 if (netdev->flags & IFF_UP)
1417 schedule_work(&card->tx_timeout_task);
1418 else
1419 atomic_dec(&card->tx_timeout_task_counter);
1420 }
1421
1422 static const struct net_device_ops gelic_netdevice_ops = {
1423 .ndo_open = gelic_net_open,
1424 .ndo_stop = gelic_net_stop,
1425 .ndo_start_xmit = gelic_net_xmit,
1426 .ndo_set_rx_mode = gelic_net_set_multi,
1427 .ndo_tx_timeout = gelic_net_tx_timeout,
1428 .ndo_set_mac_address = eth_mac_addr,
1429 .ndo_validate_addr = eth_validate_addr,
1430 #ifdef CONFIG_NET_POLL_CONTROLLER
1431 .ndo_poll_controller = gelic_net_poll_controller,
1432 #endif
1433 };
1434
1435 /**
1436 * gelic_ether_setup_netdev_ops - initialization of net_device operations
1437 * @netdev: net_device structure
1438 * @napi: napi structure
1439 *
1440 * fills out function pointers in the net_device structure
1441 */
gelic_ether_setup_netdev_ops(struct net_device * netdev,struct napi_struct * napi)1442 static void gelic_ether_setup_netdev_ops(struct net_device *netdev,
1443 struct napi_struct *napi)
1444 {
1445 netdev->watchdog_timeo = GELIC_NET_WATCHDOG_TIMEOUT;
1446 /* NAPI */
1447 netif_napi_add(netdev, napi, gelic_net_poll);
1448 netdev->ethtool_ops = &gelic_ether_ethtool_ops;
1449 netdev->netdev_ops = &gelic_netdevice_ops;
1450 }
1451
1452 /**
1453 * gelic_ether_setup_netdev - initialization of net_device
1454 * @netdev: net_device structure
1455 * @card: card structure
1456 *
1457 * Returns 0 on success or <0 on failure
1458 *
1459 * gelic_ether_setup_netdev initializes the net_device structure
1460 * and register it.
1461 **/
gelic_net_setup_netdev(struct net_device * netdev,struct gelic_card * card)1462 int gelic_net_setup_netdev(struct net_device *netdev, struct gelic_card *card)
1463 {
1464 int status;
1465 u64 v1, v2;
1466
1467 netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_RXCSUM;
1468
1469 netdev->features = NETIF_F_IP_CSUM;
1470 if (GELIC_CARD_RX_CSUM_DEFAULT)
1471 netdev->features |= NETIF_F_RXCSUM;
1472
1473 status = lv1_net_control(bus_id(card), dev_id(card),
1474 GELIC_LV1_GET_MAC_ADDRESS,
1475 0, 0, 0, &v1, &v2);
1476 v1 <<= 16;
1477 if (status || !is_valid_ether_addr((u8 *)&v1)) {
1478 dev_info(ctodev(card),
1479 "%s:lv1_net_control GET_MAC_ADDR failed %d\n",
1480 __func__, status);
1481 return -EINVAL;
1482 }
1483 eth_hw_addr_set(netdev, (u8 *)&v1);
1484
1485 if (card->vlan_required) {
1486 netdev->hard_header_len += VLAN_HLEN;
1487 /*
1488 * As vlan is internally used,
1489 * we can not receive vlan packets
1490 */
1491 netdev->features |= NETIF_F_VLAN_CHALLENGED;
1492 }
1493
1494 /* MTU range: 64 - 1518 */
1495 netdev->min_mtu = GELIC_NET_MIN_MTU;
1496 netdev->max_mtu = GELIC_NET_MAX_MTU;
1497
1498 status = register_netdev(netdev);
1499 if (status) {
1500 dev_err(ctodev(card), "%s:Couldn't register %s %d\n",
1501 __func__, netdev->name, status);
1502 return status;
1503 }
1504 dev_info(ctodev(card), "%s: MAC addr %pM\n",
1505 netdev->name, netdev->dev_addr);
1506
1507 return 0;
1508 }
1509
1510 /**
1511 * gelic_alloc_card_net - allocates net_device and card structure
1512 *
1513 * returns the card structure or NULL in case of errors
1514 *
1515 * the card and net_device structures are linked to each other
1516 */
1517 #define GELIC_ALIGN (32)
gelic_alloc_card_net(struct net_device ** netdev)1518 static struct gelic_card *gelic_alloc_card_net(struct net_device **netdev)
1519 {
1520 struct gelic_card *card;
1521 struct gelic_port *port;
1522 void *p;
1523 size_t alloc_size;
1524 /*
1525 * gelic requires dma descriptor is 32 bytes aligned and
1526 * the hypervisor requires irq_status is 8 bytes aligned.
1527 */
1528 BUILD_BUG_ON(offsetof(struct gelic_card, irq_status) % 8);
1529 BUILD_BUG_ON(offsetof(struct gelic_card, descr) % 32);
1530 alloc_size =
1531 sizeof(struct gelic_card) +
1532 sizeof(struct gelic_descr) * GELIC_NET_RX_DESCRIPTORS +
1533 sizeof(struct gelic_descr) * GELIC_NET_TX_DESCRIPTORS +
1534 GELIC_ALIGN - 1;
1535
1536 p = kzalloc(alloc_size, GFP_KERNEL);
1537 if (!p)
1538 return NULL;
1539 card = PTR_ALIGN(p, GELIC_ALIGN);
1540 card->unalign = p;
1541
1542 /*
1543 * alloc netdev
1544 */
1545 *netdev = alloc_etherdev(sizeof(struct gelic_port));
1546 if (!*netdev) {
1547 kfree(card->unalign);
1548 return NULL;
1549 }
1550 port = netdev_priv(*netdev);
1551
1552 /* gelic_port */
1553 port->netdev = *netdev;
1554 port->card = card;
1555 port->type = GELIC_PORT_ETHERNET_0;
1556
1557 /* gelic_card */
1558 card->netdev[GELIC_PORT_ETHERNET_0] = *netdev;
1559
1560 INIT_WORK(&card->tx_timeout_task, gelic_net_tx_timeout_task);
1561 init_waitqueue_head(&card->waitq);
1562 atomic_set(&card->tx_timeout_task_counter, 0);
1563 mutex_init(&card->updown_lock);
1564 atomic_set(&card->users, 0);
1565
1566 return card;
1567 }
1568
gelic_card_get_vlan_info(struct gelic_card * card)1569 static void gelic_card_get_vlan_info(struct gelic_card *card)
1570 {
1571 u64 v1, v2;
1572 int status;
1573 unsigned int i;
1574 struct {
1575 int tx;
1576 int rx;
1577 } vlan_id_ix[2] = {
1578 [GELIC_PORT_ETHERNET_0] = {
1579 .tx = GELIC_LV1_VLAN_TX_ETHERNET_0,
1580 .rx = GELIC_LV1_VLAN_RX_ETHERNET_0
1581 },
1582 [GELIC_PORT_WIRELESS] = {
1583 .tx = GELIC_LV1_VLAN_TX_WIRELESS,
1584 .rx = GELIC_LV1_VLAN_RX_WIRELESS
1585 }
1586 };
1587
1588 for (i = 0; i < ARRAY_SIZE(vlan_id_ix); i++) {
1589 /* tx tag */
1590 status = lv1_net_control(bus_id(card), dev_id(card),
1591 GELIC_LV1_GET_VLAN_ID,
1592 vlan_id_ix[i].tx,
1593 0, 0, &v1, &v2);
1594 if (status || !v1) {
1595 if (status != LV1_NO_ENTRY)
1596 dev_dbg(ctodev(card),
1597 "get vlan id for tx(%d) failed(%d)\n",
1598 vlan_id_ix[i].tx, status);
1599 card->vlan[i].tx = 0;
1600 card->vlan[i].rx = 0;
1601 continue;
1602 }
1603 card->vlan[i].tx = (u16)v1;
1604
1605 /* rx tag */
1606 status = lv1_net_control(bus_id(card), dev_id(card),
1607 GELIC_LV1_GET_VLAN_ID,
1608 vlan_id_ix[i].rx,
1609 0, 0, &v1, &v2);
1610 if (status || !v1) {
1611 if (status != LV1_NO_ENTRY)
1612 dev_info(ctodev(card),
1613 "get vlan id for rx(%d) failed(%d)\n",
1614 vlan_id_ix[i].rx, status);
1615 card->vlan[i].tx = 0;
1616 card->vlan[i].rx = 0;
1617 continue;
1618 }
1619 card->vlan[i].rx = (u16)v1;
1620
1621 dev_dbg(ctodev(card), "vlan_id[%d] tx=%02x rx=%02x\n",
1622 i, card->vlan[i].tx, card->vlan[i].rx);
1623 }
1624
1625 if (card->vlan[GELIC_PORT_ETHERNET_0].tx) {
1626 BUG_ON(!card->vlan[GELIC_PORT_WIRELESS].tx);
1627 card->vlan_required = 1;
1628 } else
1629 card->vlan_required = 0;
1630
1631 /* check wirelss capable firmware */
1632 if (ps3_compare_firmware_version(1, 6, 0) < 0) {
1633 card->vlan[GELIC_PORT_WIRELESS].tx = 0;
1634 card->vlan[GELIC_PORT_WIRELESS].rx = 0;
1635 }
1636
1637 dev_info(ctodev(card), "internal vlan %s\n",
1638 card->vlan_required? "enabled" : "disabled");
1639 }
1640 /*
1641 * ps3_gelic_driver_probe - add a device to the control of this driver
1642 */
ps3_gelic_driver_probe(struct ps3_system_bus_device * dev)1643 static int ps3_gelic_driver_probe(struct ps3_system_bus_device *dev)
1644 {
1645 struct gelic_card *card;
1646 struct net_device *netdev;
1647 int result;
1648
1649 pr_debug("%s: called\n", __func__);
1650
1651 udbg_shutdown_ps3gelic();
1652
1653 result = ps3_open_hv_device(dev);
1654
1655 if (result) {
1656 dev_dbg(&dev->core, "%s:ps3_open_hv_device failed\n",
1657 __func__);
1658 goto fail_open;
1659 }
1660
1661 result = ps3_dma_region_create(dev->d_region);
1662
1663 if (result) {
1664 dev_dbg(&dev->core, "%s:ps3_dma_region_create failed(%d)\n",
1665 __func__, result);
1666 BUG_ON("check region type");
1667 goto fail_dma_region;
1668 }
1669
1670 /* alloc card/netdevice */
1671 card = gelic_alloc_card_net(&netdev);
1672 if (!card) {
1673 dev_info(&dev->core, "%s:gelic_net_alloc_card failed\n",
1674 __func__);
1675 result = -ENOMEM;
1676 goto fail_alloc_card;
1677 }
1678 ps3_system_bus_set_drvdata(dev, card);
1679 card->dev = dev;
1680
1681 /* get internal vlan info */
1682 gelic_card_get_vlan_info(card);
1683
1684 card->link_mode = GELIC_LV1_ETHER_AUTO_NEG;
1685
1686 /* setup interrupt */
1687 result = lv1_net_set_interrupt_status_indicator(bus_id(card),
1688 dev_id(card),
1689 ps3_mm_phys_to_lpar(__pa(&card->irq_status)),
1690 0);
1691
1692 if (result) {
1693 dev_dbg(&dev->core,
1694 "%s:set_interrupt_status_indicator failed: %s\n",
1695 __func__, ps3_result(result));
1696 result = -EIO;
1697 goto fail_status_indicator;
1698 }
1699
1700 result = ps3_sb_event_receive_port_setup(dev, PS3_BINDING_CPU_ANY,
1701 &card->irq);
1702
1703 if (result) {
1704 dev_info(ctodev(card),
1705 "%s:gelic_net_open_device failed (%d)\n",
1706 __func__, result);
1707 result = -EPERM;
1708 goto fail_alloc_irq;
1709 }
1710 result = request_irq(card->irq, gelic_card_interrupt,
1711 0, netdev->name, card);
1712
1713 if (result) {
1714 dev_info(ctodev(card), "%s:request_irq failed (%d)\n",
1715 __func__, result);
1716 goto fail_request_irq;
1717 }
1718
1719 /* setup card structure */
1720 card->irq_mask = GELIC_CARD_RXINT | GELIC_CARD_TXINT |
1721 GELIC_CARD_PORT_STATUS_CHANGED;
1722
1723
1724 result = gelic_card_init_chain(card, &card->tx_chain,
1725 card->descr, GELIC_NET_TX_DESCRIPTORS);
1726 if (result)
1727 goto fail_alloc_tx;
1728 result = gelic_card_init_chain(card, &card->rx_chain,
1729 card->descr + GELIC_NET_TX_DESCRIPTORS,
1730 GELIC_NET_RX_DESCRIPTORS);
1731 if (result)
1732 goto fail_alloc_rx;
1733
1734 /* head of chain */
1735 card->tx_top = card->tx_chain.head;
1736 card->rx_top = card->rx_chain.head;
1737 dev_dbg(ctodev(card), "descr rx %p, tx %p, size %#lx, num %#x\n",
1738 card->rx_top, card->tx_top, sizeof(struct gelic_descr),
1739 GELIC_NET_RX_DESCRIPTORS);
1740 /* allocate rx skbs */
1741 result = gelic_card_alloc_rx_skbs(card);
1742 if (result)
1743 goto fail_alloc_skbs;
1744
1745 spin_lock_init(&card->tx_lock);
1746 card->tx_dma_progress = 0;
1747
1748 /* setup net_device structure */
1749 netdev->irq = card->irq;
1750 SET_NETDEV_DEV(netdev, &card->dev->core);
1751 gelic_ether_setup_netdev_ops(netdev, &card->napi);
1752 result = gelic_net_setup_netdev(netdev, card);
1753 if (result) {
1754 dev_dbg(&dev->core, "%s: setup_netdev failed %d\n",
1755 __func__, result);
1756 goto fail_setup_netdev;
1757 }
1758
1759 #ifdef CONFIG_GELIC_WIRELESS
1760 result = gelic_wl_driver_probe(card);
1761 if (result) {
1762 dev_dbg(&dev->core, "%s: WL init failed\n", __func__);
1763 goto fail_setup_netdev;
1764 }
1765 #endif
1766 pr_debug("%s: done\n", __func__);
1767 return 0;
1768
1769 fail_setup_netdev:
1770 fail_alloc_skbs:
1771 gelic_card_free_chain(card, card->rx_chain.head);
1772 fail_alloc_rx:
1773 gelic_card_free_chain(card, card->tx_chain.head);
1774 fail_alloc_tx:
1775 free_irq(card->irq, card);
1776 netdev->irq = 0;
1777 fail_request_irq:
1778 ps3_sb_event_receive_port_destroy(dev, card->irq);
1779 fail_alloc_irq:
1780 lv1_net_set_interrupt_status_indicator(bus_id(card),
1781 bus_id(card),
1782 0, 0);
1783 fail_status_indicator:
1784 ps3_system_bus_set_drvdata(dev, NULL);
1785 kfree(netdev_card(netdev)->unalign);
1786 free_netdev(netdev);
1787 fail_alloc_card:
1788 ps3_dma_region_free(dev->d_region);
1789 fail_dma_region:
1790 ps3_close_hv_device(dev);
1791 fail_open:
1792 return result;
1793 }
1794
1795 /*
1796 * ps3_gelic_driver_remove - remove a device from the control of this driver
1797 */
1798
ps3_gelic_driver_remove(struct ps3_system_bus_device * dev)1799 static void ps3_gelic_driver_remove(struct ps3_system_bus_device *dev)
1800 {
1801 struct gelic_card *card = ps3_system_bus_get_drvdata(dev);
1802 struct net_device *netdev0;
1803 pr_debug("%s: called\n", __func__);
1804
1805 /* set auto-negotiation */
1806 gelic_card_set_link_mode(card, GELIC_LV1_ETHER_AUTO_NEG);
1807
1808 #ifdef CONFIG_GELIC_WIRELESS
1809 gelic_wl_driver_remove(card);
1810 #endif
1811 /* stop interrupt */
1812 gelic_card_set_irq_mask(card, 0);
1813
1814 /* turn off DMA, force end */
1815 gelic_card_disable_rxdmac(card);
1816 gelic_card_disable_txdmac(card);
1817
1818 /* release chains */
1819 gelic_card_release_tx_chain(card, 1);
1820 gelic_card_release_rx_chain(card);
1821
1822 gelic_card_free_chain(card, card->tx_top);
1823 gelic_card_free_chain(card, card->rx_top);
1824
1825 netdev0 = card->netdev[GELIC_PORT_ETHERNET_0];
1826 /* disconnect event port */
1827 free_irq(card->irq, card);
1828 netdev0->irq = 0;
1829 ps3_sb_event_receive_port_destroy(card->dev, card->irq);
1830
1831 wait_event(card->waitq,
1832 atomic_read(&card->tx_timeout_task_counter) == 0);
1833
1834 lv1_net_set_interrupt_status_indicator(bus_id(card), dev_id(card),
1835 0 , 0);
1836
1837 unregister_netdev(netdev0);
1838 kfree(netdev_card(netdev0)->unalign);
1839 free_netdev(netdev0);
1840
1841 ps3_system_bus_set_drvdata(dev, NULL);
1842
1843 ps3_dma_region_free(dev->d_region);
1844
1845 ps3_close_hv_device(dev);
1846
1847 pr_debug("%s: done\n", __func__);
1848 }
1849
1850 static struct ps3_system_bus_driver ps3_gelic_driver = {
1851 .match_id = PS3_MATCH_ID_GELIC,
1852 .probe = ps3_gelic_driver_probe,
1853 .remove = ps3_gelic_driver_remove,
1854 .shutdown = ps3_gelic_driver_remove,
1855 .core.name = "ps3_gelic_driver",
1856 .core.owner = THIS_MODULE,
1857 };
1858
ps3_gelic_driver_init(void)1859 static int __init ps3_gelic_driver_init (void)
1860 {
1861 return firmware_has_feature(FW_FEATURE_PS3_LV1)
1862 ? ps3_system_bus_driver_register(&ps3_gelic_driver)
1863 : -ENODEV;
1864 }
1865
ps3_gelic_driver_exit(void)1866 static void __exit ps3_gelic_driver_exit (void)
1867 {
1868 ps3_system_bus_driver_unregister(&ps3_gelic_driver);
1869 }
1870
1871 module_init(ps3_gelic_driver_init);
1872 module_exit(ps3_gelic_driver_exit);
1873
1874 MODULE_ALIAS(PS3_MODULE_ALIAS_GELIC);
1875
1876