xref: /openbmc/u-boot/drivers/usb/host/dwc2.c (revision 9450ab2b)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
4  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
5  */
6 
7 #include <common.h>
8 #include <dm.h>
9 #include <errno.h>
10 #include <usb.h>
11 #include <malloc.h>
12 #include <memalign.h>
13 #include <phys2bus.h>
14 #include <usbroothubdes.h>
15 #include <wait_bit.h>
16 #include <asm/io.h>
17 #include <power/regulator.h>
18 #include <reset.h>
19 
20 #include "dwc2.h"
21 
22 /* Use only HC channel 0. */
23 #define DWC2_HC_CHANNEL			0
24 
25 #define DWC2_STATUS_BUF_SIZE		64
26 #define DWC2_DATA_BUF_SIZE		(CONFIG_USB_DWC2_BUFFER_SIZE * 1024)
27 
28 #define MAX_DEVICE			16
29 #define MAX_ENDPOINT			16
30 
31 struct dwc2_priv {
32 #if CONFIG_IS_ENABLED(DM_USB)
33 	uint8_t aligned_buffer[DWC2_DATA_BUF_SIZE] __aligned(ARCH_DMA_MINALIGN);
34 	uint8_t status_buffer[DWC2_STATUS_BUF_SIZE] __aligned(ARCH_DMA_MINALIGN);
35 #ifdef CONFIG_DM_REGULATOR
36 	struct udevice *vbus_supply;
37 #endif
38 #else
39 	uint8_t *aligned_buffer;
40 	uint8_t *status_buffer;
41 #endif
42 	u8 in_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
43 	u8 out_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
44 	struct dwc2_core_regs *regs;
45 	int root_hub_devnum;
46 	bool ext_vbus;
47 	/*
48 	 * The hnp/srp capability must be disabled if the platform
49 	 * does't support hnp/srp. Otherwise the force mode can't work.
50 	 */
51 	bool hnp_srp_disable;
52 	bool oc_disable;
53 
54 	struct reset_ctl_bulk	resets;
55 };
56 
57 #if !CONFIG_IS_ENABLED(DM_USB)
58 /* We need cacheline-aligned buffers for DMA transfers and dcache support */
59 DEFINE_ALIGN_BUFFER(uint8_t, aligned_buffer_addr, DWC2_DATA_BUF_SIZE,
60 		ARCH_DMA_MINALIGN);
61 DEFINE_ALIGN_BUFFER(uint8_t, status_buffer_addr, DWC2_STATUS_BUF_SIZE,
62 		ARCH_DMA_MINALIGN);
63 
64 static struct dwc2_priv local;
65 #endif
66 
67 /*
68  * DWC2 IP interface
69  */
70 
71 /*
72  * Initializes the FSLSPClkSel field of the HCFG register
73  * depending on the PHY type.
74  */
init_fslspclksel(struct dwc2_core_regs * regs)75 static void init_fslspclksel(struct dwc2_core_regs *regs)
76 {
77 	uint32_t phyclk;
78 
79 #if (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS)
80 	phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ;	/* Full speed PHY */
81 #else
82 	/* High speed PHY running at full speed or high speed */
83 	phyclk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ;
84 #endif
85 
86 #ifdef CONFIG_DWC2_ULPI_FS_LS
87 	uint32_t hwcfg2 = readl(&regs->ghwcfg2);
88 	uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >>
89 			DWC2_HWCFG2_HS_PHY_TYPE_OFFSET;
90 	uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >>
91 			DWC2_HWCFG2_FS_PHY_TYPE_OFFSET;
92 
93 	if (hval == 2 && fval == 1)
94 		phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ;	/* Full speed PHY */
95 #endif
96 
97 	clrsetbits_le32(&regs->host_regs.hcfg,
98 			DWC2_HCFG_FSLSPCLKSEL_MASK,
99 			phyclk << DWC2_HCFG_FSLSPCLKSEL_OFFSET);
100 }
101 
102 /*
103  * Flush a Tx FIFO.
104  *
105  * @param regs Programming view of DWC_otg controller.
106  * @param num Tx FIFO to flush.
107  */
dwc_otg_flush_tx_fifo(struct dwc2_core_regs * regs,const int num)108 static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num)
109 {
110 	int ret;
111 
112 	writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET),
113 	       &regs->grstctl);
114 	ret = wait_for_bit_le32(&regs->grstctl, DWC2_GRSTCTL_TXFFLSH,
115 				false, 1000, false);
116 	if (ret)
117 		dev_info(dev, "%s: Timeout!\n", __func__);
118 
119 	/* Wait for 3 PHY Clocks */
120 	udelay(1);
121 }
122 
123 /*
124  * Flush Rx FIFO.
125  *
126  * @param regs Programming view of DWC_otg controller.
127  */
dwc_otg_flush_rx_fifo(struct dwc2_core_regs * regs)128 static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
129 {
130 	int ret;
131 
132 	writel(DWC2_GRSTCTL_RXFFLSH, &regs->grstctl);
133 	ret = wait_for_bit_le32(&regs->grstctl, DWC2_GRSTCTL_RXFFLSH,
134 				false, 1000, false);
135 	if (ret)
136 		dev_info(dev, "%s: Timeout!\n", __func__);
137 
138 	/* Wait for 3 PHY Clocks */
139 	udelay(1);
140 }
141 
142 /*
143  * Do core a soft reset of the core.  Be careful with this because it
144  * resets all the internal state machines of the core.
145  */
dwc_otg_core_reset(struct dwc2_core_regs * regs)146 static void dwc_otg_core_reset(struct dwc2_core_regs *regs)
147 {
148 	int ret;
149 
150 	/* Wait for AHB master IDLE state. */
151 	ret = wait_for_bit_le32(&regs->grstctl, DWC2_GRSTCTL_AHBIDLE,
152 				true, 1000, false);
153 	if (ret)
154 		dev_info(dev, "%s: Timeout!\n", __func__);
155 
156 	/* Core Soft Reset */
157 	writel(DWC2_GRSTCTL_CSFTRST, &regs->grstctl);
158 	ret = wait_for_bit_le32(&regs->grstctl, DWC2_GRSTCTL_CSFTRST,
159 				false, 1000, false);
160 	if (ret)
161 		dev_info(dev, "%s: Timeout!\n", __func__);
162 
163 	/*
164 	 * Wait for core to come out of reset.
165 	 * NOTE: This long sleep is _very_ important, otherwise the core will
166 	 *       not stay in host mode after a connector ID change!
167 	 */
168 	mdelay(100);
169 }
170 
171 #if CONFIG_IS_ENABLED(DM_USB) && defined(CONFIG_DM_REGULATOR)
dwc_vbus_supply_init(struct udevice * dev)172 static int dwc_vbus_supply_init(struct udevice *dev)
173 {
174 	struct dwc2_priv *priv = dev_get_priv(dev);
175 	int ret;
176 
177 	ret = device_get_supply_regulator(dev, "vbus-supply",
178 					  &priv->vbus_supply);
179 	if (ret) {
180 		debug("%s: No vbus supply\n", dev->name);
181 		return 0;
182 	}
183 
184 	ret = regulator_set_enable(priv->vbus_supply, true);
185 	if (ret) {
186 		dev_err(dev, "Error enabling vbus supply\n");
187 		return ret;
188 	}
189 
190 	return 0;
191 }
192 
dwc_vbus_supply_exit(struct udevice * dev)193 static int dwc_vbus_supply_exit(struct udevice *dev)
194 {
195 	struct dwc2_priv *priv = dev_get_priv(dev);
196 	int ret;
197 
198 	if (priv->vbus_supply) {
199 		ret = regulator_set_enable(priv->vbus_supply, false);
200 		if (ret) {
201 			dev_err(dev, "Error disabling vbus supply\n");
202 			return ret;
203 		}
204 	}
205 
206 	return 0;
207 }
208 #else
dwc_vbus_supply_init(struct udevice * dev)209 static int dwc_vbus_supply_init(struct udevice *dev)
210 {
211 	return 0;
212 }
213 
214 #if CONFIG_IS_ENABLED(DM_USB)
dwc_vbus_supply_exit(struct udevice * dev)215 static int dwc_vbus_supply_exit(struct udevice *dev)
216 {
217 	return 0;
218 }
219 #endif
220 #endif
221 
222 /*
223  * This function initializes the DWC_otg controller registers for
224  * host mode.
225  *
226  * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
227  * request queues. Host channels are reset to ensure that they are ready for
228  * performing transfers.
229  *
230  * @param dev USB Device (NULL if driver model is not being used)
231  * @param regs Programming view of DWC_otg controller
232  *
233  */
dwc_otg_core_host_init(struct udevice * dev,struct dwc2_core_regs * regs)234 static void dwc_otg_core_host_init(struct udevice *dev,
235 				   struct dwc2_core_regs *regs)
236 {
237 	uint32_t nptxfifosize = 0;
238 	uint32_t ptxfifosize = 0;
239 	uint32_t hprt0 = 0;
240 	int i, ret, num_channels;
241 
242 	/* Restart the Phy Clock */
243 	writel(0, &regs->pcgcctl);
244 
245 	/* Initialize Host Configuration Register */
246 	init_fslspclksel(regs);
247 #ifdef CONFIG_DWC2_DFLT_SPEED_FULL
248 	setbits_le32(&regs->host_regs.hcfg, DWC2_HCFG_FSLSSUPP);
249 #endif
250 
251 	/* Configure data FIFO sizes */
252 #ifdef CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
253 	if (readl(&regs->ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) {
254 		/* Rx FIFO */
255 		writel(CONFIG_DWC2_HOST_RX_FIFO_SIZE, &regs->grxfsiz);
256 
257 		/* Non-periodic Tx FIFO */
258 		nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE <<
259 				DWC2_FIFOSIZE_DEPTH_OFFSET;
260 		nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE <<
261 				DWC2_FIFOSIZE_STARTADDR_OFFSET;
262 		writel(nptxfifosize, &regs->gnptxfsiz);
263 
264 		/* Periodic Tx FIFO */
265 		ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE <<
266 				DWC2_FIFOSIZE_DEPTH_OFFSET;
267 		ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE +
268 				CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) <<
269 				DWC2_FIFOSIZE_STARTADDR_OFFSET;
270 		writel(ptxfifosize, &regs->hptxfsiz);
271 	}
272 #endif
273 
274 	/* Clear Host Set HNP Enable in the OTG Control Register */
275 	clrbits_le32(&regs->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN);
276 
277 	/* Make sure the FIFOs are flushed. */
278 	dwc_otg_flush_tx_fifo(regs, 0x10);	/* All Tx FIFOs */
279 	dwc_otg_flush_rx_fifo(regs);
280 
281 	/* Flush out any leftover queued requests. */
282 	num_channels = readl(&regs->ghwcfg2);
283 	num_channels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK;
284 	num_channels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET;
285 	num_channels += 1;
286 
287 	for (i = 0; i < num_channels; i++)
288 		clrsetbits_le32(&regs->hc_regs[i].hcchar,
289 				DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR,
290 				DWC2_HCCHAR_CHDIS);
291 
292 	/* Halt all channels to put them into a known state. */
293 	for (i = 0; i < num_channels; i++) {
294 		clrsetbits_le32(&regs->hc_regs[i].hcchar,
295 				DWC2_HCCHAR_EPDIR,
296 				DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS);
297 		ret = wait_for_bit_le32(&regs->hc_regs[i].hcchar,
298 					DWC2_HCCHAR_CHEN, false, 1000, false);
299 		if (ret)
300 			dev_info("%s: Timeout!\n", __func__);
301 	}
302 
303 	/* Turn on the vbus power. */
304 	if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST) {
305 		hprt0 = readl(&regs->hprt0);
306 		hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET);
307 		hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
308 		if (!(hprt0 & DWC2_HPRT0_PRTPWR)) {
309 			hprt0 |= DWC2_HPRT0_PRTPWR;
310 			writel(hprt0, &regs->hprt0);
311 		}
312 	}
313 
314 	if (dev)
315 		dwc_vbus_supply_init(dev);
316 }
317 
318 /*
319  * This function initializes the DWC_otg controller registers and
320  * prepares the core for device mode or host mode operation.
321  *
322  * @param regs Programming view of the DWC_otg controller
323  */
dwc_otg_core_init(struct dwc2_priv * priv)324 static void dwc_otg_core_init(struct dwc2_priv *priv)
325 {
326 	struct dwc2_core_regs *regs = priv->regs;
327 	uint32_t ahbcfg = 0;
328 	uint32_t usbcfg = 0;
329 	uint8_t brst_sz = CONFIG_DWC2_DMA_BURST_SIZE;
330 
331 	/* Common Initialization */
332 	usbcfg = readl(&regs->gusbcfg);
333 
334 	/* Program the ULPI External VBUS bit if needed */
335 	if (priv->ext_vbus) {
336 		usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
337 		if (!priv->oc_disable) {
338 			usbcfg |= DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR |
339 				  DWC2_GUSBCFG_INDICATOR_PASSTHROUGH;
340 		}
341 	} else {
342 		usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
343 	}
344 
345 	/* Set external TS Dline pulsing */
346 #ifdef CONFIG_DWC2_TS_DLINE
347 	usbcfg |= DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
348 #else
349 	usbcfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
350 #endif
351 	writel(usbcfg, &regs->gusbcfg);
352 
353 	/* Reset the Controller */
354 	dwc_otg_core_reset(regs);
355 
356 	/*
357 	 * This programming sequence needs to happen in FS mode before
358 	 * any other programming occurs
359 	 */
360 #if defined(CONFIG_DWC2_DFLT_SPEED_FULL) && \
361 	(CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS)
362 	/* If FS mode with FS PHY */
363 	setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_PHYSEL);
364 
365 	/* Reset after a PHY select */
366 	dwc_otg_core_reset(regs);
367 
368 	/*
369 	 * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.
370 	 * Also do this on HNP Dev/Host mode switches (done in dev_init
371 	 * and host_init).
372 	 */
373 	if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST)
374 		init_fslspclksel(regs);
375 
376 #ifdef CONFIG_DWC2_I2C_ENABLE
377 	/* Program GUSBCFG.OtgUtmifsSel to I2C */
378 	setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL);
379 
380 	/* Program GI2CCTL.I2CEn */
381 	clrsetbits_le32(&regs->gi2cctl, DWC2_GI2CCTL_I2CEN |
382 			DWC2_GI2CCTL_I2CDEVADDR_MASK,
383 			1 << DWC2_GI2CCTL_I2CDEVADDR_OFFSET);
384 	setbits_le32(&regs->gi2cctl, DWC2_GI2CCTL_I2CEN);
385 #endif
386 
387 #else
388 	/* High speed PHY. */
389 
390 	/*
391 	 * HS PHY parameters. These parameters are preserved during
392 	 * soft reset so only program the first time. Do a soft reset
393 	 * immediately after setting phyif.
394 	 */
395 	usbcfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF);
396 	usbcfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET;
397 
398 	if (usbcfg & DWC2_GUSBCFG_ULPI_UTMI_SEL) {	/* ULPI interface */
399 #ifdef CONFIG_DWC2_PHY_ULPI_DDR
400 		usbcfg |= DWC2_GUSBCFG_DDRSEL;
401 #else
402 		usbcfg &= ~DWC2_GUSBCFG_DDRSEL;
403 #endif
404 	} else {	/* UTMI+ interface */
405 #if (CONFIG_DWC2_UTMI_WIDTH == 16)
406 		usbcfg |= DWC2_GUSBCFG_PHYIF;
407 #endif
408 	}
409 
410 	writel(usbcfg, &regs->gusbcfg);
411 
412 	/* Reset after setting the PHY parameters */
413 	dwc_otg_core_reset(regs);
414 #endif
415 
416 	usbcfg = readl(&regs->gusbcfg);
417 	usbcfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M);
418 #ifdef CONFIG_DWC2_ULPI_FS_LS
419 	uint32_t hwcfg2 = readl(&regs->ghwcfg2);
420 	uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >>
421 			DWC2_HWCFG2_HS_PHY_TYPE_OFFSET;
422 	uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >>
423 			DWC2_HWCFG2_FS_PHY_TYPE_OFFSET;
424 	if (hval == 2 && fval == 1) {
425 		usbcfg |= DWC2_GUSBCFG_ULPI_FSLS;
426 		usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M;
427 	}
428 #endif
429 	if (priv->hnp_srp_disable)
430 		usbcfg |= DWC2_GUSBCFG_FORCEHOSTMODE;
431 
432 	writel(usbcfg, &regs->gusbcfg);
433 
434 	/* Program the GAHBCFG Register. */
435 	switch (readl(&regs->ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) {
436 	case DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY:
437 		break;
438 	case DWC2_HWCFG2_ARCHITECTURE_EXT_DMA:
439 		while (brst_sz > 1) {
440 			ahbcfg |= ahbcfg + (1 << DWC2_GAHBCFG_HBURSTLEN_OFFSET);
441 			ahbcfg &= DWC2_GAHBCFG_HBURSTLEN_MASK;
442 			brst_sz >>= 1;
443 		}
444 
445 #ifdef CONFIG_DWC2_DMA_ENABLE
446 		ahbcfg |= DWC2_GAHBCFG_DMAENABLE;
447 #endif
448 		break;
449 
450 	case DWC2_HWCFG2_ARCHITECTURE_INT_DMA:
451 		ahbcfg |= DWC2_GAHBCFG_HBURSTLEN_INCR4;
452 #ifdef CONFIG_DWC2_DMA_ENABLE
453 		ahbcfg |= DWC2_GAHBCFG_DMAENABLE;
454 #endif
455 		break;
456 	}
457 
458 	writel(ahbcfg, &regs->gahbcfg);
459 
460 	/* Program the capabilities in GUSBCFG Register */
461 	usbcfg = 0;
462 
463 	if (!priv->hnp_srp_disable)
464 		usbcfg |= DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP;
465 #ifdef CONFIG_DWC2_IC_USB_CAP
466 	usbcfg |= DWC2_GUSBCFG_IC_USB_CAP;
467 #endif
468 
469 	setbits_le32(&regs->gusbcfg, usbcfg);
470 }
471 
472 /*
473  * Prepares a host channel for transferring packets to/from a specific
474  * endpoint. The HCCHARn register is set up with the characteristics specified
475  * in _hc. Host channel interrupts that may need to be serviced while this
476  * transfer is in progress are enabled.
477  *
478  * @param regs Programming view of DWC_otg controller
479  * @param hc Information needed to initialize the host channel
480  */
dwc_otg_hc_init(struct dwc2_core_regs * regs,uint8_t hc_num,struct usb_device * dev,uint8_t dev_addr,uint8_t ep_num,uint8_t ep_is_in,uint8_t ep_type,uint16_t max_packet)481 static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num,
482 		struct usb_device *dev, uint8_t dev_addr, uint8_t ep_num,
483 		uint8_t ep_is_in, uint8_t ep_type, uint16_t max_packet)
484 {
485 	struct dwc2_hc_regs *hc_regs = &regs->hc_regs[hc_num];
486 	uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) |
487 			  (ep_num << DWC2_HCCHAR_EPNUM_OFFSET) |
488 			  (ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) |
489 			  (ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) |
490 			  (max_packet << DWC2_HCCHAR_MPS_OFFSET);
491 
492 	if (dev->speed == USB_SPEED_LOW)
493 		hcchar |= DWC2_HCCHAR_LSPDDEV;
494 
495 	/*
496 	 * Program the HCCHARn register with the endpoint characteristics
497 	 * for the current transfer.
498 	 */
499 	writel(hcchar, &hc_regs->hcchar);
500 
501 	/* Program the HCSPLIT register, default to no SPLIT */
502 	writel(0, &hc_regs->hcsplt);
503 }
504 
dwc_otg_hc_init_split(struct dwc2_hc_regs * hc_regs,uint8_t hub_devnum,uint8_t hub_port)505 static void dwc_otg_hc_init_split(struct dwc2_hc_regs *hc_regs,
506 				  uint8_t hub_devnum, uint8_t hub_port)
507 {
508 	uint32_t hcsplt = 0;
509 
510 	hcsplt = DWC2_HCSPLT_SPLTENA;
511 	hcsplt |= hub_devnum << DWC2_HCSPLT_HUBADDR_OFFSET;
512 	hcsplt |= hub_port << DWC2_HCSPLT_PRTADDR_OFFSET;
513 
514 	/* Program the HCSPLIT register for SPLITs */
515 	writel(hcsplt, &hc_regs->hcsplt);
516 }
517 
518 /*
519  * DWC2 to USB API interface
520  */
521 /* Direction: In ; Request: Status */
dwc_otg_submit_rh_msg_in_status(struct dwc2_core_regs * regs,struct usb_device * dev,void * buffer,int txlen,struct devrequest * cmd)522 static int dwc_otg_submit_rh_msg_in_status(struct dwc2_core_regs *regs,
523 					   struct usb_device *dev, void *buffer,
524 					   int txlen, struct devrequest *cmd)
525 {
526 	uint32_t hprt0 = 0;
527 	uint32_t port_status = 0;
528 	uint32_t port_change = 0;
529 	int len = 0;
530 	int stat = 0;
531 
532 	switch (cmd->requesttype & ~USB_DIR_IN) {
533 	case 0:
534 		*(uint16_t *)buffer = cpu_to_le16(1);
535 		len = 2;
536 		break;
537 	case USB_RECIP_INTERFACE:
538 	case USB_RECIP_ENDPOINT:
539 		*(uint16_t *)buffer = cpu_to_le16(0);
540 		len = 2;
541 		break;
542 	case USB_TYPE_CLASS:
543 		*(uint32_t *)buffer = cpu_to_le32(0);
544 		len = 4;
545 		break;
546 	case USB_RECIP_OTHER | USB_TYPE_CLASS:
547 		hprt0 = readl(&regs->hprt0);
548 		if (hprt0 & DWC2_HPRT0_PRTCONNSTS)
549 			port_status |= USB_PORT_STAT_CONNECTION;
550 		if (hprt0 & DWC2_HPRT0_PRTENA)
551 			port_status |= USB_PORT_STAT_ENABLE;
552 		if (hprt0 & DWC2_HPRT0_PRTSUSP)
553 			port_status |= USB_PORT_STAT_SUSPEND;
554 		if (hprt0 & DWC2_HPRT0_PRTOVRCURRACT)
555 			port_status |= USB_PORT_STAT_OVERCURRENT;
556 		if (hprt0 & DWC2_HPRT0_PRTRST)
557 			port_status |= USB_PORT_STAT_RESET;
558 		if (hprt0 & DWC2_HPRT0_PRTPWR)
559 			port_status |= USB_PORT_STAT_POWER;
560 
561 		if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) == DWC2_HPRT0_PRTSPD_LOW)
562 			port_status |= USB_PORT_STAT_LOW_SPEED;
563 		else if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) ==
564 			 DWC2_HPRT0_PRTSPD_HIGH)
565 			port_status |= USB_PORT_STAT_HIGH_SPEED;
566 
567 		if (hprt0 & DWC2_HPRT0_PRTENCHNG)
568 			port_change |= USB_PORT_STAT_C_ENABLE;
569 		if (hprt0 & DWC2_HPRT0_PRTCONNDET)
570 			port_change |= USB_PORT_STAT_C_CONNECTION;
571 		if (hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG)
572 			port_change |= USB_PORT_STAT_C_OVERCURRENT;
573 
574 		*(uint32_t *)buffer = cpu_to_le32(port_status |
575 					(port_change << 16));
576 		len = 4;
577 		break;
578 	default:
579 		puts("unsupported root hub command\n");
580 		stat = USB_ST_STALLED;
581 	}
582 
583 	dev->act_len = min(len, txlen);
584 	dev->status = stat;
585 
586 	return stat;
587 }
588 
589 /* Direction: In ; Request: Descriptor */
dwc_otg_submit_rh_msg_in_descriptor(struct usb_device * dev,void * buffer,int txlen,struct devrequest * cmd)590 static int dwc_otg_submit_rh_msg_in_descriptor(struct usb_device *dev,
591 					       void *buffer, int txlen,
592 					       struct devrequest *cmd)
593 {
594 	unsigned char data[32];
595 	uint32_t dsc;
596 	int len = 0;
597 	int stat = 0;
598 	uint16_t wValue = cpu_to_le16(cmd->value);
599 	uint16_t wLength = cpu_to_le16(cmd->length);
600 
601 	switch (cmd->requesttype & ~USB_DIR_IN) {
602 	case 0:
603 		switch (wValue & 0xff00) {
604 		case 0x0100:	/* device descriptor */
605 			len = min3(txlen, (int)sizeof(root_hub_dev_des), (int)wLength);
606 			memcpy(buffer, root_hub_dev_des, len);
607 			break;
608 		case 0x0200:	/* configuration descriptor */
609 			len = min3(txlen, (int)sizeof(root_hub_config_des), (int)wLength);
610 			memcpy(buffer, root_hub_config_des, len);
611 			break;
612 		case 0x0300:	/* string descriptors */
613 			switch (wValue & 0xff) {
614 			case 0x00:
615 				len = min3(txlen, (int)sizeof(root_hub_str_index0),
616 					   (int)wLength);
617 				memcpy(buffer, root_hub_str_index0, len);
618 				break;
619 			case 0x01:
620 				len = min3(txlen, (int)sizeof(root_hub_str_index1),
621 					   (int)wLength);
622 				memcpy(buffer, root_hub_str_index1, len);
623 				break;
624 			}
625 			break;
626 		default:
627 			stat = USB_ST_STALLED;
628 		}
629 		break;
630 
631 	case USB_TYPE_CLASS:
632 		/* Root port config, set 1 port and nothing else. */
633 		dsc = 0x00000001;
634 
635 		data[0] = 9;		/* min length; */
636 		data[1] = 0x29;
637 		data[2] = dsc & RH_A_NDP;
638 		data[3] = 0;
639 		if (dsc & RH_A_PSM)
640 			data[3] |= 0x1;
641 		if (dsc & RH_A_NOCP)
642 			data[3] |= 0x10;
643 		else if (dsc & RH_A_OCPM)
644 			data[3] |= 0x8;
645 
646 		/* corresponds to data[4-7] */
647 		data[5] = (dsc & RH_A_POTPGT) >> 24;
648 		data[7] = dsc & RH_B_DR;
649 		if (data[2] < 7) {
650 			data[8] = 0xff;
651 		} else {
652 			data[0] += 2;
653 			data[8] = (dsc & RH_B_DR) >> 8;
654 			data[9] = 0xff;
655 			data[10] = data[9];
656 		}
657 
658 		len = min3(txlen, (int)data[0], (int)wLength);
659 		memcpy(buffer, data, len);
660 		break;
661 	default:
662 		puts("unsupported root hub command\n");
663 		stat = USB_ST_STALLED;
664 	}
665 
666 	dev->act_len = min(len, txlen);
667 	dev->status = stat;
668 
669 	return stat;
670 }
671 
672 /* Direction: In ; Request: Configuration */
dwc_otg_submit_rh_msg_in_configuration(struct usb_device * dev,void * buffer,int txlen,struct devrequest * cmd)673 static int dwc_otg_submit_rh_msg_in_configuration(struct usb_device *dev,
674 						  void *buffer, int txlen,
675 						  struct devrequest *cmd)
676 {
677 	int len = 0;
678 	int stat = 0;
679 
680 	switch (cmd->requesttype & ~USB_DIR_IN) {
681 	case 0:
682 		*(uint8_t *)buffer = 0x01;
683 		len = 1;
684 		break;
685 	default:
686 		puts("unsupported root hub command\n");
687 		stat = USB_ST_STALLED;
688 	}
689 
690 	dev->act_len = min(len, txlen);
691 	dev->status = stat;
692 
693 	return stat;
694 }
695 
696 /* Direction: In */
dwc_otg_submit_rh_msg_in(struct dwc2_priv * priv,struct usb_device * dev,void * buffer,int txlen,struct devrequest * cmd)697 static int dwc_otg_submit_rh_msg_in(struct dwc2_priv *priv,
698 				    struct usb_device *dev, void *buffer,
699 				    int txlen, struct devrequest *cmd)
700 {
701 	switch (cmd->request) {
702 	case USB_REQ_GET_STATUS:
703 		return dwc_otg_submit_rh_msg_in_status(priv->regs, dev, buffer,
704 						       txlen, cmd);
705 	case USB_REQ_GET_DESCRIPTOR:
706 		return dwc_otg_submit_rh_msg_in_descriptor(dev, buffer,
707 							   txlen, cmd);
708 	case USB_REQ_GET_CONFIGURATION:
709 		return dwc_otg_submit_rh_msg_in_configuration(dev, buffer,
710 							      txlen, cmd);
711 	default:
712 		puts("unsupported root hub command\n");
713 		return USB_ST_STALLED;
714 	}
715 }
716 
717 /* Direction: Out */
dwc_otg_submit_rh_msg_out(struct dwc2_priv * priv,struct usb_device * dev,void * buffer,int txlen,struct devrequest * cmd)718 static int dwc_otg_submit_rh_msg_out(struct dwc2_priv *priv,
719 				     struct usb_device *dev,
720 				     void *buffer, int txlen,
721 				     struct devrequest *cmd)
722 {
723 	struct dwc2_core_regs *regs = priv->regs;
724 	int len = 0;
725 	int stat = 0;
726 	uint16_t bmrtype_breq = cmd->requesttype | (cmd->request << 8);
727 	uint16_t wValue = cpu_to_le16(cmd->value);
728 
729 	switch (bmrtype_breq & ~USB_DIR_IN) {
730 	case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_ENDPOINT:
731 	case (USB_REQ_CLEAR_FEATURE << 8) | USB_TYPE_CLASS:
732 		break;
733 
734 	case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS:
735 		switch (wValue) {
736 		case USB_PORT_FEAT_C_CONNECTION:
737 			setbits_le32(&regs->hprt0, DWC2_HPRT0_PRTCONNDET);
738 			break;
739 		}
740 		break;
741 
742 	case (USB_REQ_SET_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS:
743 		switch (wValue) {
744 		case USB_PORT_FEAT_SUSPEND:
745 			break;
746 
747 		case USB_PORT_FEAT_RESET:
748 			clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
749 					DWC2_HPRT0_PRTCONNDET |
750 					DWC2_HPRT0_PRTENCHNG |
751 					DWC2_HPRT0_PRTOVRCURRCHNG,
752 					DWC2_HPRT0_PRTRST);
753 			mdelay(50);
754 			clrbits_le32(&regs->hprt0, DWC2_HPRT0_PRTRST);
755 			break;
756 
757 		case USB_PORT_FEAT_POWER:
758 			clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
759 					DWC2_HPRT0_PRTCONNDET |
760 					DWC2_HPRT0_PRTENCHNG |
761 					DWC2_HPRT0_PRTOVRCURRCHNG,
762 					DWC2_HPRT0_PRTRST);
763 			break;
764 
765 		case USB_PORT_FEAT_ENABLE:
766 			break;
767 		}
768 		break;
769 	case (USB_REQ_SET_ADDRESS << 8):
770 		priv->root_hub_devnum = wValue;
771 		break;
772 	case (USB_REQ_SET_CONFIGURATION << 8):
773 		break;
774 	default:
775 		puts("unsupported root hub command\n");
776 		stat = USB_ST_STALLED;
777 	}
778 
779 	len = min(len, txlen);
780 
781 	dev->act_len = len;
782 	dev->status = stat;
783 
784 	return stat;
785 }
786 
dwc_otg_submit_rh_msg(struct dwc2_priv * priv,struct usb_device * dev,unsigned long pipe,void * buffer,int txlen,struct devrequest * cmd)787 static int dwc_otg_submit_rh_msg(struct dwc2_priv *priv, struct usb_device *dev,
788 				 unsigned long pipe, void *buffer, int txlen,
789 				 struct devrequest *cmd)
790 {
791 	int stat = 0;
792 
793 	if (usb_pipeint(pipe)) {
794 		puts("Root-Hub submit IRQ: NOT implemented\n");
795 		return 0;
796 	}
797 
798 	if (cmd->requesttype & USB_DIR_IN)
799 		stat = dwc_otg_submit_rh_msg_in(priv, dev, buffer, txlen, cmd);
800 	else
801 		stat = dwc_otg_submit_rh_msg_out(priv, dev, buffer, txlen, cmd);
802 
803 	mdelay(1);
804 
805 	return stat;
806 }
807 
wait_for_chhltd(struct dwc2_hc_regs * hc_regs,uint32_t * sub,u8 * toggle)808 int wait_for_chhltd(struct dwc2_hc_regs *hc_regs, uint32_t *sub, u8 *toggle)
809 {
810 	int ret;
811 	uint32_t hcint, hctsiz;
812 
813 	ret = wait_for_bit_le32(&hc_regs->hcint, DWC2_HCINT_CHHLTD, true,
814 				2000, false);
815 	if (ret)
816 		return ret;
817 
818 	hcint = readl(&hc_regs->hcint);
819 	hctsiz = readl(&hc_regs->hctsiz);
820 	*sub = (hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK) >>
821 		DWC2_HCTSIZ_XFERSIZE_OFFSET;
822 	*toggle = (hctsiz & DWC2_HCTSIZ_PID_MASK) >> DWC2_HCTSIZ_PID_OFFSET;
823 
824 	debug("%s: HCINT=%08x sub=%u toggle=%d\n", __func__, hcint, *sub,
825 	      *toggle);
826 
827 	if (hcint & DWC2_HCINT_XFERCOMP)
828 		return 0;
829 
830 	if (hcint & (DWC2_HCINT_NAK | DWC2_HCINT_FRMOVRUN))
831 		return -EAGAIN;
832 
833 	debug("%s: Error (HCINT=%08x)\n", __func__, hcint);
834 	return -EINVAL;
835 }
836 
837 static int dwc2_eptype[] = {
838 	DWC2_HCCHAR_EPTYPE_ISOC,
839 	DWC2_HCCHAR_EPTYPE_INTR,
840 	DWC2_HCCHAR_EPTYPE_CONTROL,
841 	DWC2_HCCHAR_EPTYPE_BULK,
842 };
843 
transfer_chunk(struct dwc2_hc_regs * hc_regs,void * aligned_buffer,u8 * pid,int in,void * buffer,int num_packets,int xfer_len,int * actual_len,int odd_frame)844 static int transfer_chunk(struct dwc2_hc_regs *hc_regs, void *aligned_buffer,
845 			  u8 *pid, int in, void *buffer, int num_packets,
846 			  int xfer_len, int *actual_len, int odd_frame)
847 {
848 	int ret = 0;
849 	uint32_t sub;
850 
851 	debug("%s: chunk: pid %d xfer_len %u pkts %u\n", __func__,
852 	      *pid, xfer_len, num_packets);
853 
854 	writel((xfer_len << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
855 	       (num_packets << DWC2_HCTSIZ_PKTCNT_OFFSET) |
856 	       (*pid << DWC2_HCTSIZ_PID_OFFSET),
857 	       &hc_regs->hctsiz);
858 
859 	if (xfer_len) {
860 		if (in) {
861 			invalidate_dcache_range(
862 					(uintptr_t)aligned_buffer,
863 					(uintptr_t)aligned_buffer +
864 					roundup(xfer_len, ARCH_DMA_MINALIGN));
865 		} else {
866 			memcpy(aligned_buffer, buffer, xfer_len);
867 			flush_dcache_range(
868 					(uintptr_t)aligned_buffer,
869 					(uintptr_t)aligned_buffer +
870 					roundup(xfer_len, ARCH_DMA_MINALIGN));
871 		}
872 	}
873 
874 	writel(phys_to_bus((unsigned long)aligned_buffer), &hc_regs->hcdma);
875 
876 	/* Clear old interrupt conditions for this host channel. */
877 	writel(0x3fff, &hc_regs->hcint);
878 
879 	/* Set host channel enable after all other setup is complete. */
880 	clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
881 			DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS |
882 			DWC2_HCCHAR_ODDFRM,
883 			(1 << DWC2_HCCHAR_MULTICNT_OFFSET) |
884 			(odd_frame << DWC2_HCCHAR_ODDFRM_OFFSET) |
885 			DWC2_HCCHAR_CHEN);
886 
887 	ret = wait_for_chhltd(hc_regs, &sub, pid);
888 	if (ret < 0)
889 		return ret;
890 
891 	if (in) {
892 		xfer_len -= sub;
893 
894 		invalidate_dcache_range((unsigned long)aligned_buffer,
895 					(unsigned long)aligned_buffer +
896 					roundup(xfer_len, ARCH_DMA_MINALIGN));
897 
898 		memcpy(buffer, aligned_buffer, xfer_len);
899 	}
900 	*actual_len = xfer_len;
901 
902 	return ret;
903 }
904 
chunk_msg(struct dwc2_priv * priv,struct usb_device * dev,unsigned long pipe,u8 * pid,int in,void * buffer,int len)905 int chunk_msg(struct dwc2_priv *priv, struct usb_device *dev,
906 	      unsigned long pipe, u8 *pid, int in, void *buffer, int len)
907 {
908 	struct dwc2_core_regs *regs = priv->regs;
909 	struct dwc2_hc_regs *hc_regs = &regs->hc_regs[DWC2_HC_CHANNEL];
910 	struct dwc2_host_regs *host_regs = &regs->host_regs;
911 	int devnum = usb_pipedevice(pipe);
912 	int ep = usb_pipeendpoint(pipe);
913 	int max = usb_maxpacket(dev, pipe);
914 	int eptype = dwc2_eptype[usb_pipetype(pipe)];
915 	int done = 0;
916 	int ret = 0;
917 	int do_split = 0;
918 	int complete_split = 0;
919 	uint32_t xfer_len;
920 	uint32_t num_packets;
921 	int stop_transfer = 0;
922 	uint32_t max_xfer_len;
923 	int ssplit_frame_num = 0;
924 
925 	debug("%s: msg: pipe %lx pid %d in %d len %d\n", __func__, pipe, *pid,
926 	      in, len);
927 
928 	max_xfer_len = CONFIG_DWC2_MAX_PACKET_COUNT * max;
929 	if (max_xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE)
930 		max_xfer_len = CONFIG_DWC2_MAX_TRANSFER_SIZE;
931 	if (max_xfer_len > DWC2_DATA_BUF_SIZE)
932 		max_xfer_len = DWC2_DATA_BUF_SIZE;
933 
934 	/* Make sure that max_xfer_len is a multiple of max packet size. */
935 	num_packets = max_xfer_len / max;
936 	max_xfer_len = num_packets * max;
937 
938 	/* Initialize channel */
939 	dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, dev, devnum, ep, in,
940 			eptype, max);
941 
942 	/* Check if the target is a FS/LS device behind a HS hub */
943 	if (dev->speed != USB_SPEED_HIGH) {
944 		uint8_t hub_addr;
945 		uint8_t hub_port;
946 		uint32_t hprt0 = readl(&regs->hprt0);
947 		if ((hprt0 & DWC2_HPRT0_PRTSPD_MASK) ==
948 		     DWC2_HPRT0_PRTSPD_HIGH) {
949 			usb_find_usb2_hub_address_port(dev, &hub_addr,
950 						       &hub_port);
951 			dwc_otg_hc_init_split(hc_regs, hub_addr, hub_port);
952 
953 			do_split = 1;
954 			num_packets = 1;
955 			max_xfer_len = max;
956 		}
957 	}
958 
959 	do {
960 		int actual_len = 0;
961 		uint32_t hcint;
962 		int odd_frame = 0;
963 		xfer_len = len - done;
964 
965 		if (xfer_len > max_xfer_len)
966 			xfer_len = max_xfer_len;
967 		else if (xfer_len > max)
968 			num_packets = (xfer_len + max - 1) / max;
969 		else
970 			num_packets = 1;
971 
972 		if (complete_split)
973 			setbits_le32(&hc_regs->hcsplt, DWC2_HCSPLT_COMPSPLT);
974 		else if (do_split)
975 			clrbits_le32(&hc_regs->hcsplt, DWC2_HCSPLT_COMPSPLT);
976 
977 		if (eptype == DWC2_HCCHAR_EPTYPE_INTR) {
978 			int uframe_num = readl(&host_regs->hfnum);
979 			if (!(uframe_num & 0x1))
980 				odd_frame = 1;
981 		}
982 
983 		ret = transfer_chunk(hc_regs, priv->aligned_buffer, pid,
984 				     in, (char *)buffer + done, num_packets,
985 				     xfer_len, &actual_len, odd_frame);
986 
987 		hcint = readl(&hc_regs->hcint);
988 		if (complete_split) {
989 			stop_transfer = 0;
990 			if (hcint & DWC2_HCINT_NYET) {
991 				ret = 0;
992 				int frame_num = DWC2_HFNUM_MAX_FRNUM &
993 						readl(&host_regs->hfnum);
994 				if (((frame_num - ssplit_frame_num) &
995 				    DWC2_HFNUM_MAX_FRNUM) > 4)
996 					ret = -EAGAIN;
997 			} else
998 				complete_split = 0;
999 		} else if (do_split) {
1000 			if (hcint & DWC2_HCINT_ACK) {
1001 				ssplit_frame_num = DWC2_HFNUM_MAX_FRNUM &
1002 						   readl(&host_regs->hfnum);
1003 				ret = 0;
1004 				complete_split = 1;
1005 			}
1006 		}
1007 
1008 		if (ret)
1009 			break;
1010 
1011 		if (actual_len < xfer_len)
1012 			stop_transfer = 1;
1013 
1014 		done += actual_len;
1015 
1016 	/* Transactions are done when when either all data is transferred or
1017 	 * there is a short transfer. In case of a SPLIT make sure the CSPLIT
1018 	 * is executed.
1019 	 */
1020 	} while (((done < len) && !stop_transfer) || complete_split);
1021 
1022 	writel(0, &hc_regs->hcintmsk);
1023 	writel(0xFFFFFFFF, &hc_regs->hcint);
1024 
1025 	dev->status = 0;
1026 	dev->act_len = done;
1027 
1028 	return ret;
1029 }
1030 
1031 /* U-Boot USB transmission interface */
_submit_bulk_msg(struct dwc2_priv * priv,struct usb_device * dev,unsigned long pipe,void * buffer,int len)1032 int _submit_bulk_msg(struct dwc2_priv *priv, struct usb_device *dev,
1033 		     unsigned long pipe, void *buffer, int len)
1034 {
1035 	int devnum = usb_pipedevice(pipe);
1036 	int ep = usb_pipeendpoint(pipe);
1037 	u8* pid;
1038 
1039 	if ((devnum >= MAX_DEVICE) || (devnum == priv->root_hub_devnum)) {
1040 		dev->status = 0;
1041 		return -EINVAL;
1042 	}
1043 
1044 	if (usb_pipein(pipe))
1045 		pid = &priv->in_data_toggle[devnum][ep];
1046 	else
1047 		pid = &priv->out_data_toggle[devnum][ep];
1048 
1049 	return chunk_msg(priv, dev, pipe, pid, usb_pipein(pipe), buffer, len);
1050 }
1051 
_submit_control_msg(struct dwc2_priv * priv,struct usb_device * dev,unsigned long pipe,void * buffer,int len,struct devrequest * setup)1052 static int _submit_control_msg(struct dwc2_priv *priv, struct usb_device *dev,
1053 			       unsigned long pipe, void *buffer, int len,
1054 			       struct devrequest *setup)
1055 {
1056 	int devnum = usb_pipedevice(pipe);
1057 	int ret, act_len;
1058 	u8 pid;
1059 	/* For CONTROL endpoint pid should start with DATA1 */
1060 	int status_direction;
1061 
1062 	if (devnum == priv->root_hub_devnum) {
1063 		dev->status = 0;
1064 		dev->speed = USB_SPEED_HIGH;
1065 		return dwc_otg_submit_rh_msg(priv, dev, pipe, buffer, len,
1066 					     setup);
1067 	}
1068 
1069 	/* SETUP stage */
1070 	pid = DWC2_HC_PID_SETUP;
1071 	do {
1072 		ret = chunk_msg(priv, dev, pipe, &pid, 0, setup, 8);
1073 	} while (ret == -EAGAIN);
1074 	if (ret)
1075 		return ret;
1076 
1077 	/* DATA stage */
1078 	act_len = 0;
1079 	if (buffer) {
1080 		pid = DWC2_HC_PID_DATA1;
1081 		do {
1082 			ret = chunk_msg(priv, dev, pipe, &pid, usb_pipein(pipe),
1083 					buffer, len);
1084 			act_len += dev->act_len;
1085 			buffer += dev->act_len;
1086 			len -= dev->act_len;
1087 		} while (ret == -EAGAIN);
1088 		if (ret)
1089 			return ret;
1090 		status_direction = usb_pipeout(pipe);
1091 	} else {
1092 		/* No-data CONTROL always ends with an IN transaction */
1093 		status_direction = 1;
1094 	}
1095 
1096 	/* STATUS stage */
1097 	pid = DWC2_HC_PID_DATA1;
1098 	do {
1099 		ret = chunk_msg(priv, dev, pipe, &pid, status_direction,
1100 				priv->status_buffer, 0);
1101 	} while (ret == -EAGAIN);
1102 	if (ret)
1103 		return ret;
1104 
1105 	dev->act_len = act_len;
1106 
1107 	return 0;
1108 }
1109 
_submit_int_msg(struct dwc2_priv * priv,struct usb_device * dev,unsigned long pipe,void * buffer,int len,int interval)1110 int _submit_int_msg(struct dwc2_priv *priv, struct usb_device *dev,
1111 		    unsigned long pipe, void *buffer, int len, int interval)
1112 {
1113 	unsigned long timeout;
1114 	int ret;
1115 
1116 	/* FIXME: what is interval? */
1117 
1118 	timeout = get_timer(0) + USB_TIMEOUT_MS(pipe);
1119 	for (;;) {
1120 		if (get_timer(0) > timeout) {
1121 			dev_err(dev, "Timeout poll on interrupt endpoint\n");
1122 			return -ETIMEDOUT;
1123 		}
1124 		ret = _submit_bulk_msg(priv, dev, pipe, buffer, len);
1125 		if (ret != -EAGAIN)
1126 			return ret;
1127 	}
1128 }
1129 
dwc2_reset(struct udevice * dev)1130 static int dwc2_reset(struct udevice *dev)
1131 {
1132 	int ret;
1133 	struct dwc2_priv *priv = dev_get_priv(dev);
1134 
1135 	ret = reset_get_bulk(dev, &priv->resets);
1136 	if (ret) {
1137 		dev_warn(dev, "Can't get reset: %d\n", ret);
1138 		/* Return 0 if error due to !CONFIG_DM_RESET and reset
1139 		 * DT property is not present.
1140 		 */
1141 		if (ret == -ENOENT || ret == -ENOTSUPP)
1142 			return 0;
1143 		else
1144 			return ret;
1145 	}
1146 
1147 	ret = reset_deassert_bulk(&priv->resets);
1148 	if (ret) {
1149 		reset_release_bulk(&priv->resets);
1150 		dev_err(dev, "Failed to reset: %d\n", ret);
1151 		return ret;
1152 	}
1153 
1154 	return 0;
1155 }
1156 
dwc2_init_common(struct udevice * dev,struct dwc2_priv * priv)1157 static int dwc2_init_common(struct udevice *dev, struct dwc2_priv *priv)
1158 {
1159 	struct dwc2_core_regs *regs = priv->regs;
1160 	uint32_t snpsid;
1161 	int i, j;
1162 	int ret;
1163 
1164 	ret = dwc2_reset(dev);
1165 	if (ret)
1166 		return ret;
1167 
1168 	snpsid = readl(&regs->gsnpsid);
1169 	dev_info(dev, "Core Release: %x.%03x\n",
1170 		 snpsid >> 12 & 0xf, snpsid & 0xfff);
1171 
1172 	if ((snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_2xx &&
1173 	    (snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_3xx) {
1174 		dev_info(dev, "SNPSID invalid (not DWC2 OTG device): %08x\n",
1175 			 snpsid);
1176 		return -ENODEV;
1177 	}
1178 
1179 #ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS
1180 	priv->ext_vbus = 1;
1181 #else
1182 	priv->ext_vbus = 0;
1183 #endif
1184 
1185 	dwc_otg_core_init(priv);
1186 	dwc_otg_core_host_init(dev, regs);
1187 
1188 	clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
1189 			DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
1190 			DWC2_HPRT0_PRTOVRCURRCHNG,
1191 			DWC2_HPRT0_PRTRST);
1192 	mdelay(50);
1193 	clrbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
1194 		     DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG |
1195 		     DWC2_HPRT0_PRTRST);
1196 
1197 	for (i = 0; i < MAX_DEVICE; i++) {
1198 		for (j = 0; j < MAX_ENDPOINT; j++) {
1199 			priv->in_data_toggle[i][j] = DWC2_HC_PID_DATA0;
1200 			priv->out_data_toggle[i][j] = DWC2_HC_PID_DATA0;
1201 		}
1202 	}
1203 
1204 	/*
1205 	 * Add a 1 second delay here. This gives the host controller
1206 	 * a bit time before the comminucation with the USB devices
1207 	 * is started (the bus is scanned) and  fixes the USB detection
1208 	 * problems with some problematic USB keys.
1209 	 */
1210 	if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST)
1211 		mdelay(1000);
1212 
1213 	return 0;
1214 }
1215 
dwc2_uninit_common(struct dwc2_core_regs * regs)1216 static void dwc2_uninit_common(struct dwc2_core_regs *regs)
1217 {
1218 	/* Put everything in reset. */
1219 	clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
1220 			DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
1221 			DWC2_HPRT0_PRTOVRCURRCHNG,
1222 			DWC2_HPRT0_PRTRST);
1223 }
1224 
1225 #if !CONFIG_IS_ENABLED(DM_USB)
submit_control_msg(struct usb_device * dev,unsigned long pipe,void * buffer,int len,struct devrequest * setup)1226 int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1227 		       int len, struct devrequest *setup)
1228 {
1229 	return _submit_control_msg(&local, dev, pipe, buffer, len, setup);
1230 }
1231 
submit_bulk_msg(struct usb_device * dev,unsigned long pipe,void * buffer,int len)1232 int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1233 		    int len)
1234 {
1235 	return _submit_bulk_msg(&local, dev, pipe, buffer, len);
1236 }
1237 
submit_int_msg(struct usb_device * dev,unsigned long pipe,void * buffer,int len,int interval)1238 int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
1239 		   int len, int interval)
1240 {
1241 	return _submit_int_msg(&local, dev, pipe, buffer, len, interval);
1242 }
1243 
1244 /* U-Boot USB control interface */
usb_lowlevel_init(int index,enum usb_init_type init,void ** controller)1245 int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
1246 {
1247 	struct dwc2_priv *priv = &local;
1248 
1249 	memset(priv, '\0', sizeof(*priv));
1250 	priv->root_hub_devnum = 0;
1251 	priv->regs = (struct dwc2_core_regs *)CONFIG_USB_DWC2_REG_ADDR;
1252 	priv->aligned_buffer = aligned_buffer_addr;
1253 	priv->status_buffer = status_buffer_addr;
1254 
1255 	/* board-dependant init */
1256 	if (board_usb_init(index, USB_INIT_HOST))
1257 		return -1;
1258 
1259 	return dwc2_init_common(NULL, priv);
1260 }
1261 
usb_lowlevel_stop(int index)1262 int usb_lowlevel_stop(int index)
1263 {
1264 	dwc2_uninit_common(local.regs);
1265 
1266 	return 0;
1267 }
1268 #endif
1269 
1270 #if CONFIG_IS_ENABLED(DM_USB)
dwc2_submit_control_msg(struct udevice * dev,struct usb_device * udev,unsigned long pipe,void * buffer,int length,struct devrequest * setup)1271 static int dwc2_submit_control_msg(struct udevice *dev, struct usb_device *udev,
1272 				   unsigned long pipe, void *buffer, int length,
1273 				   struct devrequest *setup)
1274 {
1275 	struct dwc2_priv *priv = dev_get_priv(dev);
1276 
1277 	debug("%s: dev='%s', udev=%p, udev->dev='%s', portnr=%d\n", __func__,
1278 	      dev->name, udev, udev->dev->name, udev->portnr);
1279 
1280 	return _submit_control_msg(priv, udev, pipe, buffer, length, setup);
1281 }
1282 
dwc2_submit_bulk_msg(struct udevice * dev,struct usb_device * udev,unsigned long pipe,void * buffer,int length)1283 static int dwc2_submit_bulk_msg(struct udevice *dev, struct usb_device *udev,
1284 				unsigned long pipe, void *buffer, int length)
1285 {
1286 	struct dwc2_priv *priv = dev_get_priv(dev);
1287 
1288 	debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
1289 
1290 	return _submit_bulk_msg(priv, udev, pipe, buffer, length);
1291 }
1292 
dwc2_submit_int_msg(struct udevice * dev,struct usb_device * udev,unsigned long pipe,void * buffer,int length,int interval)1293 static int dwc2_submit_int_msg(struct udevice *dev, struct usb_device *udev,
1294 			       unsigned long pipe, void *buffer, int length,
1295 			       int interval)
1296 {
1297 	struct dwc2_priv *priv = dev_get_priv(dev);
1298 
1299 	debug("%s: dev='%s', udev=%p\n", __func__, dev->name, udev);
1300 
1301 	return _submit_int_msg(priv, udev, pipe, buffer, length, interval);
1302 }
1303 
dwc2_usb_ofdata_to_platdata(struct udevice * dev)1304 static int dwc2_usb_ofdata_to_platdata(struct udevice *dev)
1305 {
1306 	struct dwc2_priv *priv = dev_get_priv(dev);
1307 	fdt_addr_t addr;
1308 
1309 	addr = dev_read_addr(dev);
1310 	if (addr == FDT_ADDR_T_NONE)
1311 		return -EINVAL;
1312 	priv->regs = (struct dwc2_core_regs *)addr;
1313 
1314 	priv->oc_disable = dev_read_bool(dev, "disable-over-current");
1315 	priv->hnp_srp_disable = dev_read_bool(dev, "hnp-srp-disable");
1316 
1317 	return 0;
1318 }
1319 
dwc2_usb_probe(struct udevice * dev)1320 static int dwc2_usb_probe(struct udevice *dev)
1321 {
1322 	struct dwc2_priv *priv = dev_get_priv(dev);
1323 	struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev);
1324 
1325 	bus_priv->desc_before_addr = true;
1326 
1327 	return dwc2_init_common(dev, priv);
1328 }
1329 
dwc2_usb_remove(struct udevice * dev)1330 static int dwc2_usb_remove(struct udevice *dev)
1331 {
1332 	struct dwc2_priv *priv = dev_get_priv(dev);
1333 	int ret;
1334 
1335 	ret = dwc_vbus_supply_exit(dev);
1336 	if (ret)
1337 		return ret;
1338 
1339 	dwc2_uninit_common(priv->regs);
1340 
1341 	reset_release_bulk(&priv->resets);
1342 
1343 	return 0;
1344 }
1345 
1346 struct dm_usb_ops dwc2_usb_ops = {
1347 	.control = dwc2_submit_control_msg,
1348 	.bulk = dwc2_submit_bulk_msg,
1349 	.interrupt = dwc2_submit_int_msg,
1350 };
1351 
1352 static const struct udevice_id dwc2_usb_ids[] = {
1353 	{ .compatible = "brcm,bcm2835-usb" },
1354 	{ .compatible = "brcm,bcm2708-usb" },
1355 	{ .compatible = "snps,dwc2" },
1356 	{ }
1357 };
1358 
1359 U_BOOT_DRIVER(usb_dwc2) = {
1360 	.name	= "dwc2_usb",
1361 	.id	= UCLASS_USB,
1362 	.of_match = dwc2_usb_ids,
1363 	.ofdata_to_platdata = dwc2_usb_ofdata_to_platdata,
1364 	.probe	= dwc2_usb_probe,
1365 	.remove = dwc2_usb_remove,
1366 	.ops	= &dwc2_usb_ops,
1367 	.priv_auto_alloc_size = sizeof(struct dwc2_priv),
1368 	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
1369 };
1370 #endif
1371