1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Hauppauge HD PVR USB driver
4 *
5 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
6 * Copyright (C) 2008 Janne Grunau (j@jannau.net)
7 * Copyright (C) 2008 John Poet
8 */
9
10 #include <linux/kernel.h>
11 #include <linux/errno.h>
12 #include <linux/init.h>
13 #include <linux/slab.h>
14 #include <linux/module.h>
15 #include <linux/uaccess.h>
16 #include <linux/atomic.h>
17 #include <linux/usb.h>
18 #include <linux/mutex.h>
19 #include <linux/i2c.h>
20
21 #include <linux/videodev2.h>
22 #include <media/v4l2-dev.h>
23 #include <media/v4l2-common.h>
24
25 #include "hdpvr.h"
26
27 static int video_nr[HDPVR_MAX] = {[0 ... (HDPVR_MAX - 1)] = UNSET};
28 module_param_array(video_nr, int, NULL, 0);
29 MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)");
30
31 /* holds the number of currently registered devices */
32 static atomic_t dev_nr = ATOMIC_INIT(-1);
33
34 int hdpvr_debug;
35 module_param(hdpvr_debug, int, S_IRUGO|S_IWUSR);
36 MODULE_PARM_DESC(hdpvr_debug, "enable debugging output");
37
38 static uint default_video_input = HDPVR_VIDEO_INPUTS;
39 module_param(default_video_input, uint, S_IRUGO|S_IWUSR);
40 MODULE_PARM_DESC(default_video_input, "default video input: 0=Component / 1=S-Video / 2=Composite");
41
42 static uint default_audio_input = HDPVR_AUDIO_INPUTS;
43 module_param(default_audio_input, uint, S_IRUGO|S_IWUSR);
44 MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / 1=RCA front / 2=S/PDIF");
45
46 static bool boost_audio;
47 module_param(boost_audio, bool, S_IRUGO|S_IWUSR);
48 MODULE_PARM_DESC(boost_audio, "boost the audio signal");
49
50
51 /* table of devices that work with this driver */
52 static const struct usb_device_id hdpvr_table[] = {
53 { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID) },
54 { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID1) },
55 { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID2) },
56 { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID3) },
57 { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID4) },
58 { } /* Terminating entry */
59 };
60 MODULE_DEVICE_TABLE(usb, hdpvr_table);
61
62
hdpvr_delete(struct hdpvr_device * dev)63 void hdpvr_delete(struct hdpvr_device *dev)
64 {
65 hdpvr_free_buffers(dev);
66 usb_put_dev(dev->udev);
67 }
68
challenge(u8 * bytes)69 static void challenge(u8 *bytes)
70 {
71 __le64 *i64P;
72 u64 tmp64;
73 uint i, idx;
74
75 for (idx = 0; idx < 32; ++idx) {
76
77 if (idx & 0x3)
78 bytes[(idx >> 3) + 3] = bytes[(idx >> 2) & 0x3];
79
80 switch (idx & 0x3) {
81 case 0x3:
82 bytes[2] += bytes[3] * 4 + bytes[4] + bytes[5];
83 bytes[4] += bytes[(idx & 0x1) * 2] * 9 + 9;
84 break;
85 case 0x1:
86 bytes[0] *= 8;
87 bytes[0] += 7*idx + 4;
88 bytes[6] += bytes[3] * 3;
89 break;
90 case 0x0:
91 bytes[3 - (idx >> 3)] = bytes[idx >> 2];
92 bytes[5] += bytes[6] * 3;
93 for (i = 0; i < 3; i++)
94 bytes[3] *= bytes[3] + 1;
95 break;
96 case 0x2:
97 for (i = 0; i < 3; i++)
98 bytes[1] *= bytes[6] + 1;
99 for (i = 0; i < 3; i++) {
100 i64P = (__le64 *)bytes;
101 tmp64 = le64_to_cpup(i64P);
102 tmp64 = tmp64 + (tmp64 << (bytes[7] & 0x0f));
103 *i64P = cpu_to_le64(tmp64);
104 }
105 break;
106 }
107 }
108 }
109
110 /* try to init the device like the windows driver */
device_authorization(struct hdpvr_device * dev)111 static int device_authorization(struct hdpvr_device *dev)
112 {
113
114 int ret, retval = -ENOMEM;
115 char request_type = 0x38, rcv_request = 0x81;
116 char *response;
117
118 mutex_lock(&dev->usbc_mutex);
119 ret = usb_control_msg(dev->udev,
120 usb_rcvctrlpipe(dev->udev, 0),
121 rcv_request, 0x80 | request_type,
122 0x0400, 0x0003,
123 dev->usbc_buf, 46,
124 10000);
125 if (ret != 46) {
126 v4l2_err(&dev->v4l2_dev,
127 "unexpected answer of status request, len %d\n", ret);
128 goto unlock;
129 }
130 #ifdef HDPVR_DEBUG
131 else {
132 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
133 "Status request returned, len %d: %46ph\n",
134 ret, dev->usbc_buf);
135 }
136 #endif
137
138 dev->fw_ver = dev->usbc_buf[1];
139
140 dev->usbc_buf[46] = '\0';
141 v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n",
142 dev->fw_ver, &dev->usbc_buf[2]);
143
144 if (dev->fw_ver > 0x15) {
145 dev->options.brightness = 0x80;
146 dev->options.contrast = 0x40;
147 dev->options.hue = 0xf;
148 dev->options.saturation = 0x40;
149 dev->options.sharpness = 0x80;
150 }
151
152 switch (dev->fw_ver) {
153 case HDPVR_FIRMWARE_VERSION:
154 dev->flags &= ~HDPVR_FLAG_AC3_CAP;
155 break;
156 case HDPVR_FIRMWARE_VERSION_AC3:
157 case HDPVR_FIRMWARE_VERSION_0X12:
158 case HDPVR_FIRMWARE_VERSION_0X15:
159 case HDPVR_FIRMWARE_VERSION_0X1E:
160 dev->flags |= HDPVR_FLAG_AC3_CAP;
161 break;
162 default:
163 v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might not work.\n");
164 if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3)
165 dev->flags |= HDPVR_FLAG_AC3_CAP;
166 else
167 dev->flags &= ~HDPVR_FLAG_AC3_CAP;
168 }
169
170 response = dev->usbc_buf+38;
171 #ifdef HDPVR_DEBUG
172 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, "challenge: %8ph\n",
173 response);
174 #endif
175 challenge(response);
176 #ifdef HDPVR_DEBUG
177 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, " response: %8ph\n",
178 response);
179 #endif
180
181 msleep(100);
182 ret = usb_control_msg(dev->udev,
183 usb_sndctrlpipe(dev->udev, 0),
184 0xd1, 0x00 | request_type,
185 0x0000, 0x0000,
186 response, 8,
187 10000);
188 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
189 "magic request returned %d\n", ret);
190
191 retval = ret != 8;
192 unlock:
193 mutex_unlock(&dev->usbc_mutex);
194 return retval;
195 }
196
hdpvr_device_init(struct hdpvr_device * dev)197 static int hdpvr_device_init(struct hdpvr_device *dev)
198 {
199 int ret;
200 u8 *buf;
201
202 if (device_authorization(dev))
203 return -EACCES;
204
205 /* default options for init */
206 hdpvr_set_options(dev);
207
208 /* set filter options */
209 mutex_lock(&dev->usbc_mutex);
210 buf = dev->usbc_buf;
211 buf[0] = 0x03; buf[1] = 0x03; buf[2] = 0x00; buf[3] = 0x00;
212 ret = usb_control_msg(dev->udev,
213 usb_sndctrlpipe(dev->udev, 0),
214 0x01, 0x38,
215 CTRL_LOW_PASS_FILTER_VALUE, CTRL_DEFAULT_INDEX,
216 buf, 4,
217 1000);
218 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
219 "control request returned %d\n", ret);
220 mutex_unlock(&dev->usbc_mutex);
221
222 /* enable fan and bling leds */
223 mutex_lock(&dev->usbc_mutex);
224 buf[0] = 0x1;
225 ret = usb_control_msg(dev->udev,
226 usb_sndctrlpipe(dev->udev, 0),
227 0xd4, 0x38, 0, 0, buf, 1,
228 1000);
229 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
230 "control request returned %d\n", ret);
231
232 /* boost analog audio */
233 buf[0] = boost_audio;
234 ret = usb_control_msg(dev->udev,
235 usb_sndctrlpipe(dev->udev, 0),
236 0xd5, 0x38, 0, 0, buf, 1,
237 1000);
238 v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev,
239 "control request returned %d\n", ret);
240 mutex_unlock(&dev->usbc_mutex);
241
242 dev->status = STATUS_IDLE;
243 return 0;
244 }
245
246 static const struct hdpvr_options hdpvr_default_options = {
247 .video_std = HDPVR_60HZ,
248 .video_input = HDPVR_COMPONENT,
249 .audio_input = HDPVR_RCA_BACK,
250 .bitrate = 65, /* 6 mbps */
251 .peak_bitrate = 90, /* 9 mbps */
252 .bitrate_mode = HDPVR_CONSTANT,
253 .gop_mode = HDPVR_SIMPLE_IDR_GOP,
254 .audio_codec = V4L2_MPEG_AUDIO_ENCODING_AAC,
255 /* original picture controls for firmware version <= 0x15 */
256 /* updated in device_authorization() for newer firmware */
257 .brightness = 0x86,
258 .contrast = 0x80,
259 .hue = 0x80,
260 .saturation = 0x80,
261 .sharpness = 0x80,
262 };
263
hdpvr_probe(struct usb_interface * interface,const struct usb_device_id * id)264 static int hdpvr_probe(struct usb_interface *interface,
265 const struct usb_device_id *id)
266 {
267 struct hdpvr_device *dev;
268 struct usb_host_interface *iface_desc;
269 struct usb_endpoint_descriptor *endpoint;
270 #if IS_ENABLED(CONFIG_I2C)
271 struct i2c_client *client;
272 #endif
273 size_t buffer_size;
274 int i;
275 int dev_num;
276 int retval = -ENOMEM;
277
278 /* allocate memory for our device state and initialize it */
279 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
280 if (!dev) {
281 dev_err(&interface->dev, "Out of memory\n");
282 goto error;
283 }
284
285 /* init video transfer queues first of all */
286 /* to prevent oops in hdpvr_delete() on error paths */
287 INIT_LIST_HEAD(&dev->free_buff_list);
288 INIT_LIST_HEAD(&dev->rec_buff_list);
289
290 /* register v4l2_device early so it can be used for printks */
291 if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) {
292 dev_err(&interface->dev, "v4l2_device_register failed\n");
293 goto error_free_dev;
294 }
295
296 mutex_init(&dev->io_mutex);
297 mutex_init(&dev->i2c_mutex);
298 mutex_init(&dev->usbc_mutex);
299 dev->usbc_buf = kmalloc(64, GFP_KERNEL);
300 if (!dev->usbc_buf) {
301 v4l2_err(&dev->v4l2_dev, "Out of memory\n");
302 goto error_v4l2_unregister;
303 }
304
305 init_waitqueue_head(&dev->wait_buffer);
306 init_waitqueue_head(&dev->wait_data);
307
308 dev->options = hdpvr_default_options;
309
310 if (default_video_input < HDPVR_VIDEO_INPUTS)
311 dev->options.video_input = default_video_input;
312
313 if (default_audio_input < HDPVR_AUDIO_INPUTS) {
314 dev->options.audio_input = default_audio_input;
315 if (default_audio_input == HDPVR_SPDIF)
316 dev->options.audio_codec =
317 V4L2_MPEG_AUDIO_ENCODING_AC3;
318 }
319
320 dev->udev = usb_get_dev(interface_to_usbdev(interface));
321
322 /* set up the endpoint information */
323 /* use only the first bulk-in and bulk-out endpoints */
324 iface_desc = interface->cur_altsetting;
325 for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
326 endpoint = &iface_desc->endpoint[i].desc;
327
328 if (!dev->bulk_in_endpointAddr &&
329 usb_endpoint_is_bulk_in(endpoint)) {
330 /* USB interface description is buggy, reported max
331 * packet size is 512 bytes, windows driver uses 8192 */
332 buffer_size = 8192;
333 dev->bulk_in_size = buffer_size;
334 dev->bulk_in_endpointAddr = endpoint->bEndpointAddress;
335 }
336
337 }
338 if (!dev->bulk_in_endpointAddr) {
339 v4l2_err(&dev->v4l2_dev, "Could not find bulk-in endpoint\n");
340 goto error_put_usb;
341 }
342
343 /* init the device */
344 if (hdpvr_device_init(dev)) {
345 v4l2_err(&dev->v4l2_dev, "device init failed\n");
346 goto error_put_usb;
347 }
348
349 mutex_lock(&dev->io_mutex);
350 if (hdpvr_alloc_buffers(dev, NUM_BUFFERS)) {
351 mutex_unlock(&dev->io_mutex);
352 v4l2_err(&dev->v4l2_dev,
353 "allocating transfer buffers failed\n");
354 goto error_put_usb;
355 }
356 mutex_unlock(&dev->io_mutex);
357
358 #if IS_ENABLED(CONFIG_I2C)
359 retval = hdpvr_register_i2c_adapter(dev);
360 if (retval < 0) {
361 v4l2_err(&dev->v4l2_dev, "i2c adapter register failed\n");
362 goto error_free_buffers;
363 }
364
365 client = hdpvr_register_ir_i2c(dev);
366 if (IS_ERR(client)) {
367 v4l2_err(&dev->v4l2_dev, "i2c IR device register failed\n");
368 retval = PTR_ERR(client);
369 goto reg_fail;
370 }
371 #endif
372
373 dev_num = atomic_inc_return(&dev_nr);
374 if (dev_num >= HDPVR_MAX) {
375 v4l2_err(&dev->v4l2_dev,
376 "max device number reached, device register failed\n");
377 atomic_dec(&dev_nr);
378 retval = -ENODEV;
379 goto reg_fail;
380 }
381
382 retval = hdpvr_register_videodev(dev, &interface->dev,
383 video_nr[dev_num]);
384 if (retval < 0) {
385 v4l2_err(&dev->v4l2_dev, "registering videodev failed\n");
386 goto reg_fail;
387 }
388
389 /* let the user know what node this device is now attached to */
390 v4l2_info(&dev->v4l2_dev, "device now attached to %s\n",
391 video_device_node_name(&dev->video_dev));
392 return 0;
393
394 reg_fail:
395 #if IS_ENABLED(CONFIG_I2C)
396 i2c_del_adapter(&dev->i2c_adapter);
397 error_free_buffers:
398 #endif
399 hdpvr_free_buffers(dev);
400 error_put_usb:
401 usb_put_dev(dev->udev);
402 kfree(dev->usbc_buf);
403 error_v4l2_unregister:
404 v4l2_device_unregister(&dev->v4l2_dev);
405 error_free_dev:
406 kfree(dev);
407 error:
408 return retval;
409 }
410
hdpvr_disconnect(struct usb_interface * interface)411 static void hdpvr_disconnect(struct usb_interface *interface)
412 {
413 struct hdpvr_device *dev = to_hdpvr_dev(usb_get_intfdata(interface));
414
415 v4l2_info(&dev->v4l2_dev, "device %s disconnected\n",
416 video_device_node_name(&dev->video_dev));
417 /* prevent more I/O from starting and stop any ongoing */
418 mutex_lock(&dev->io_mutex);
419 dev->status = STATUS_DISCONNECTED;
420 wake_up_interruptible(&dev->wait_data);
421 wake_up_interruptible(&dev->wait_buffer);
422 mutex_unlock(&dev->io_mutex);
423 v4l2_device_disconnect(&dev->v4l2_dev);
424 msleep(100);
425 flush_work(&dev->worker);
426 mutex_lock(&dev->io_mutex);
427 hdpvr_cancel_queue(dev);
428 mutex_unlock(&dev->io_mutex);
429 #if IS_ENABLED(CONFIG_I2C)
430 i2c_del_adapter(&dev->i2c_adapter);
431 #endif
432 video_unregister_device(&dev->video_dev);
433 atomic_dec(&dev_nr);
434 }
435
436
437 static struct usb_driver hdpvr_usb_driver = {
438 .name = "hdpvr",
439 .probe = hdpvr_probe,
440 .disconnect = hdpvr_disconnect,
441 .id_table = hdpvr_table,
442 };
443
444 module_usb_driver(hdpvr_usb_driver);
445
446 MODULE_LICENSE("GPL");
447 MODULE_VERSION("0.2.1");
448 MODULE_AUTHOR("Janne Grunau");
449 MODULE_DESCRIPTION("Hauppauge HD PVR driver");
450