xref: /openbmc/linux/arch/mips/include/asm/octeon/octeon.h (revision 2af06ba7)
1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License.  See the file "COPYING" in the main directory of this archive
4  * for more details.
5  *
6  * Copyright (C) 2004-2008 Cavium Networks
7  */
8 #ifndef __ASM_OCTEON_OCTEON_H
9 #define __ASM_OCTEON_OCTEON_H
10 
11 #include <asm/octeon/cvmx.h>
12 #include <asm/bitfield.h>
13 
14 extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size,
15 						uint64_t alignment,
16 						uint64_t min_addr,
17 						uint64_t max_addr,
18 						int do_locking);
19 extern void *octeon_bootmem_alloc(uint64_t size, uint64_t alignment,
20 				  int do_locking);
21 extern void *octeon_bootmem_alloc_range(uint64_t size, uint64_t alignment,
22 					uint64_t min_addr, uint64_t max_addr,
23 					int do_locking);
24 extern void *octeon_bootmem_alloc_named(uint64_t size, uint64_t alignment,
25 					char *name);
26 extern void *octeon_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr,
27 					      uint64_t max_addr, uint64_t align,
28 					      char *name);
29 extern void *octeon_bootmem_alloc_named_address(uint64_t size, uint64_t address,
30 						char *name);
31 extern int octeon_bootmem_free_named(char *name);
32 extern void octeon_bootmem_lock(void);
33 extern void octeon_bootmem_unlock(void);
34 
35 extern int octeon_is_simulation(void);
36 extern int octeon_is_pci_host(void);
37 extern int octeon_usb_is_ref_clk(void);
38 extern uint64_t octeon_get_clock_rate(void);
39 extern u64 octeon_get_io_clock_rate(void);
40 extern const char *octeon_board_type_string(void);
41 extern const char *octeon_get_pci_interrupts(void);
42 extern int octeon_get_southbridge_interrupt(void);
43 extern int octeon_get_boot_coremask(void);
44 extern int octeon_get_boot_num_arguments(void);
45 extern const char *octeon_get_boot_argument(int arg);
46 extern void octeon_user_io_init(void);
47 
48 extern void octeon_init_cvmcount(void);
49 extern void octeon_setup_delays(void);
50 extern void octeon_io_clk_delay(unsigned long);
51 
52 #define OCTEON_ARGV_MAX_ARGS	64
53 #define OCTEON_SERIAL_LEN	20
54 
55 struct octeon_boot_descriptor {
56 #ifdef __BIG_ENDIAN_BITFIELD
57 	/* Start of block referenced by assembly code - do not change! */
58 	uint32_t desc_version;
59 	uint32_t desc_size;
60 	uint64_t stack_top;
61 	uint64_t heap_base;
62 	uint64_t heap_end;
63 	/* Only used by bootloader */
64 	uint64_t entry_point;
65 	uint64_t desc_vaddr;
66 	/* End of This block referenced by assembly code - do not change! */
67 	uint32_t exception_base_addr;
68 	uint32_t stack_size;
69 	uint32_t heap_size;
70 	/* Argc count for application. */
71 	uint32_t argc;
72 	uint32_t argv[OCTEON_ARGV_MAX_ARGS];
73 
74 #define	 BOOT_FLAG_INIT_CORE		(1 << 0)
75 #define	 OCTEON_BL_FLAG_DEBUG		(1 << 1)
76 #define	 OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
77 	/* If set, use uart1 for console */
78 #define	 OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
79 	/* If set, use PCI console */
80 #define	 OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
81 	/* Call exit on break on serial port */
82 #define	 OCTEON_BL_FLAG_BREAK		(1 << 5)
83 
84 	uint32_t flags;
85 	uint32_t core_mask;
86 	/* DRAM size in megabyes. */
87 	uint32_t dram_size;
88 	/* physical address of free memory descriptor block. */
89 	uint32_t phy_mem_desc_addr;
90 	/* used to pass flags from app to debugger. */
91 	uint32_t debugger_flags_base_addr;
92 	/* CPU clock speed, in hz. */
93 	uint32_t eclock_hz;
94 	/* DRAM clock speed, in hz. */
95 	uint32_t dclock_hz;
96 	/* SPI4 clock in hz. */
97 	uint32_t spi_clock_hz;
98 	uint16_t board_type;
99 	uint8_t board_rev_major;
100 	uint8_t board_rev_minor;
101 	uint16_t chip_type;
102 	uint8_t chip_rev_major;
103 	uint8_t chip_rev_minor;
104 	char board_serial_number[OCTEON_SERIAL_LEN];
105 	uint8_t mac_addr_base[6];
106 	uint8_t mac_addr_count;
107 	uint64_t cvmx_desc_vaddr;
108 #else
109 	uint32_t desc_size;
110 	uint32_t desc_version;
111 	uint64_t stack_top;
112 	uint64_t heap_base;
113 	uint64_t heap_end;
114 	/* Only used by bootloader */
115 	uint64_t entry_point;
116 	uint64_t desc_vaddr;
117 	/* End of This block referenced by assembly code - do not change! */
118 	uint32_t stack_size;
119 	uint32_t exception_base_addr;
120 	uint32_t argc;
121 	uint32_t heap_size;
122 	/*
123 	 * Argc count for application.
124 	 * Warning low bit scrambled in little-endian.
125 	 */
126 	uint32_t argv[OCTEON_ARGV_MAX_ARGS];
127 
128 #define  BOOT_FLAG_INIT_CORE		(1 << 0)
129 #define  OCTEON_BL_FLAG_DEBUG		(1 << 1)
130 #define  OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
131 	/* If set, use uart1 for console */
132 #define  OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
133 	/* If set, use PCI console */
134 #define  OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
135 	/* Call exit on break on serial port */
136 #define  OCTEON_BL_FLAG_BREAK		(1 << 5)
137 
138 	uint32_t core_mask;
139 	uint32_t flags;
140 	/* physical address of free memory descriptor block. */
141 	uint32_t phy_mem_desc_addr;
142 	/* DRAM size in megabyes. */
143 	uint32_t dram_size;
144 	/* CPU clock speed, in hz. */
145 	uint32_t eclock_hz;
146 	/* used to pass flags from app to debugger. */
147 	uint32_t debugger_flags_base_addr;
148 	/* SPI4 clock in hz. */
149 	uint32_t spi_clock_hz;
150 	/* DRAM clock speed, in hz. */
151 	uint32_t dclock_hz;
152 	uint8_t chip_rev_minor;
153 	uint8_t chip_rev_major;
154 	uint16_t chip_type;
155 	uint8_t board_rev_minor;
156 	uint8_t board_rev_major;
157 	uint16_t board_type;
158 
159 	uint64_t unused1[4]; /* Not even filled in by bootloader. */
160 
161 	uint64_t cvmx_desc_vaddr;
162 #endif
163 };
164 
165 union octeon_cvmemctl {
166 	uint64_t u64;
167 	struct {
168 		/* RO 1 = BIST fail, 0 = BIST pass */
169 		__BITFIELD_FIELD(uint64_t tlbbist:1,
170 		/* RO 1 = BIST fail, 0 = BIST pass */
171 		__BITFIELD_FIELD(uint64_t l1cbist:1,
172 		/* RO 1 = BIST fail, 0 = BIST pass */
173 		__BITFIELD_FIELD(uint64_t l1dbist:1,
174 		/* RO 1 = BIST fail, 0 = BIST pass */
175 		__BITFIELD_FIELD(uint64_t dcmbist:1,
176 		/* RO 1 = BIST fail, 0 = BIST pass */
177 		__BITFIELD_FIELD(uint64_t ptgbist:1,
178 		/* RO 1 = BIST fail, 0 = BIST pass */
179 		__BITFIELD_FIELD(uint64_t wbfbist:1,
180 		/* Reserved */
181 		__BITFIELD_FIELD(uint64_t reserved:17,
182 		/* OCTEON II - TLB replacement policy: 0 = bitmask LRU; 1 = NLU.
183 		 * This field selects between the TLB replacement policies:
184 		 * bitmask LRU or NLU. Bitmask LRU maintains a mask of
185 		 * recently used TLB entries and avoids them as new entries
186 		 * are allocated. NLU simply guarantees that the next
187 		 * allocation is not the last used TLB entry. */
188 		__BITFIELD_FIELD(uint64_t tlbnlu:1,
189 		/* OCTEON II - Selects the bit in the counter used for
190 		 * releasing a PAUSE. This counter trips every 2(8+PAUSETIME)
191 		 * cycles. If not already released, the cnMIPS II core will
192 		 * always release a given PAUSE instruction within
193 		 * 2(8+PAUSETIME). If the counter trip happens to line up,
194 		 * the cnMIPS II core may release the PAUSE instantly. */
195 		__BITFIELD_FIELD(uint64_t pausetime:3,
196 		/* OCTEON II - This field is an extension of
197 		 * CvmMemCtl[DIDTTO] */
198 		__BITFIELD_FIELD(uint64_t didtto2:1,
199 		/* R/W If set, marked write-buffer entries time out
200 		 * the same as other entries; if clear, marked
201 		 * write-buffer entries use the maximum timeout. */
202 		__BITFIELD_FIELD(uint64_t dismarkwblongto:1,
203 		/* R/W If set, a merged store does not clear the
204 		 * write-buffer entry timeout state. */
205 		__BITFIELD_FIELD(uint64_t dismrgclrwbto:1,
206 		/* R/W Two bits that are the MSBs of the resultant
207 		 * CVMSEG LM word location for an IOBDMA. The other 8
208 		 * bits come from the SCRADDR field of the IOBDMA. */
209 		__BITFIELD_FIELD(uint64_t iobdmascrmsb:2,
210 		/* R/W If set, SYNCWS and SYNCS only order marked
211 		 * stores; if clear, SYNCWS and SYNCS only order
212 		 * unmarked stores. SYNCWSMARKED has no effect when
213 		 * DISSYNCWS is set. */
214 		__BITFIELD_FIELD(uint64_t syncwsmarked:1,
215 		/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as
216 		 * SYNC. */
217 		__BITFIELD_FIELD(uint64_t dissyncws:1,
218 		/* R/W If set, no stall happens on write buffer
219 		 * full. */
220 		__BITFIELD_FIELD(uint64_t diswbfst:1,
221 		/* R/W If set (and SX set), supervisor-level
222 		 * loads/stores can use XKPHYS addresses with
223 		 * VA<48>==0 */
224 		__BITFIELD_FIELD(uint64_t xkmemenas:1,
225 		/* R/W If set (and UX set), user-level loads/stores
226 		 * can use XKPHYS addresses with VA<48>==0 */
227 		__BITFIELD_FIELD(uint64_t xkmemenau:1,
228 		/* R/W If set (and SX set), supervisor-level
229 		 * loads/stores can use XKPHYS addresses with
230 		 * VA<48>==1 */
231 		__BITFIELD_FIELD(uint64_t xkioenas:1,
232 		/* R/W If set (and UX set), user-level loads/stores
233 		 * can use XKPHYS addresses with VA<48>==1 */
234 		__BITFIELD_FIELD(uint64_t xkioenau:1,
235 		/* R/W If set, all stores act as SYNCW (NOMERGE must
236 		 * be set when this is set) RW, reset to 0. */
237 		__BITFIELD_FIELD(uint64_t allsyncw:1,
238 		/* R/W If set, no stores merge, and all stores reach
239 		 * the coherent bus in order. */
240 		__BITFIELD_FIELD(uint64_t nomerge:1,
241 		/* R/W Selects the bit in the counter used for DID
242 		 * time-outs 0 = 231, 1 = 230, 2 = 229, 3 =
243 		 * 214. Actual time-out is between 1x and 2x this
244 		 * interval. For example, with DIDTTO=3, expiration
245 		 * interval is between 16K and 32K. */
246 		__BITFIELD_FIELD(uint64_t didtto:2,
247 		/* R/W If set, the (mem) CSR clock never turns off. */
248 		__BITFIELD_FIELD(uint64_t csrckalwys:1,
249 		/* R/W If set, mclk never turns off. */
250 		__BITFIELD_FIELD(uint64_t mclkalwys:1,
251 		/* R/W Selects the bit in the counter used for write
252 		 * buffer flush time-outs (WBFLT+11) is the bit
253 		 * position in an internal counter used to determine
254 		 * expiration. The write buffer expires between 1x and
255 		 * 2x this interval. For example, with WBFLT = 0, a
256 		 * write buffer expires between 2K and 4K cycles after
257 		 * the write buffer entry is allocated. */
258 		__BITFIELD_FIELD(uint64_t wbfltime:3,
259 		/* R/W If set, do not put Istream in the L2 cache. */
260 		__BITFIELD_FIELD(uint64_t istrnol2:1,
261 		/* R/W The write buffer threshold. */
262 		__BITFIELD_FIELD(uint64_t wbthresh:4,
263 		/* Reserved */
264 		__BITFIELD_FIELD(uint64_t reserved2:2,
265 		/* R/W If set, CVMSEG is available for loads/stores in
266 		 * kernel/debug mode. */
267 		__BITFIELD_FIELD(uint64_t cvmsegenak:1,
268 		/* R/W If set, CVMSEG is available for loads/stores in
269 		 * supervisor mode. */
270 		__BITFIELD_FIELD(uint64_t cvmsegenas:1,
271 		/* R/W If set, CVMSEG is available for loads/stores in
272 		 * user mode. */
273 		__BITFIELD_FIELD(uint64_t cvmsegenau:1,
274 		/* R/W Size of local memory in cache blocks, 54 (6912
275 		 * bytes) is max legal value. */
276 		__BITFIELD_FIELD(uint64_t lmemsz:6,
277 		;)))))))))))))))))))))))))))))))))
278 	} s;
279 };
280 
281 extern void octeon_check_cpu_bist(void);
282 
283 int octeon_prune_device_tree(void);
284 extern const char __dtb_octeon_3xxx_begin;
285 extern const char __dtb_octeon_68xx_begin;
286 
287 /**
288  * Write a 32bit value to the Octeon NPI register space
289  *
290  * @address: Address to write to
291  * @val:     Value to write
292  */
octeon_npi_write32(uint64_t address,uint32_t val)293 static inline void octeon_npi_write32(uint64_t address, uint32_t val)
294 {
295 	cvmx_write64_uint32(address ^ 4, val);
296 	cvmx_read64_uint32(address ^ 4);
297 }
298 
299 #ifdef CONFIG_SMP
300 void octeon_setup_smp(void);
301 #else
octeon_setup_smp(void)302 static inline void octeon_setup_smp(void) {}
303 #endif
304 
305 struct irq_domain;
306 struct device_node;
307 struct irq_data;
308 struct irq_chip;
309 void octeon_ciu3_mbox_send(int cpu, unsigned int mbox);
310 int octeon_irq_ciu3_xlat(struct irq_domain *d,
311 			 struct device_node *node,
312 			 const u32 *intspec,
313 			 unsigned int intsize,
314 			 unsigned long *out_hwirq,
315 			 unsigned int *out_type);
316 void octeon_irq_ciu3_enable(struct irq_data *data);
317 void octeon_irq_ciu3_disable(struct irq_data *data);
318 void octeon_irq_ciu3_ack(struct irq_data *data);
319 void octeon_irq_ciu3_mask(struct irq_data *data);
320 void octeon_irq_ciu3_mask_ack(struct irq_data *data);
321 int octeon_irq_ciu3_mapx(struct irq_domain *d, unsigned int virq,
322 			 irq_hw_number_t hw, struct irq_chip *chip);
323 
324 /* Octeon multiplier save/restore routines from octeon_switch.S */
325 void octeon_mult_save(void);
326 void octeon_mult_restore(void);
327 void octeon_mult_save_end(void);
328 void octeon_mult_restore_end(void);
329 void octeon_mult_save3(void);
330 void octeon_mult_save3_end(void);
331 void octeon_mult_save2(void);
332 void octeon_mult_save2_end(void);
333 void octeon_mult_restore3(void);
334 void octeon_mult_restore3_end(void);
335 void octeon_mult_restore2(void);
336 void octeon_mult_restore2_end(void);
337 
338 /**
339  * Read a 32bit value from the Octeon NPI register space
340  *
341  * @address: Address to read
342  * Returns The result
343  */
octeon_npi_read32(uint64_t address)344 static inline uint32_t octeon_npi_read32(uint64_t address)
345 {
346 	return cvmx_read64_uint32(address ^ 4);
347 }
348 
349 extern struct cvmx_bootinfo *octeon_bootinfo;
350 
351 extern uint64_t octeon_bootloader_entry_addr;
352 
353 extern void (*octeon_irq_setup_secondary)(void);
354 
355 typedef void (*octeon_irq_ip4_handler_t)(void);
356 void octeon_irq_set_ip4_handler(octeon_irq_ip4_handler_t);
357 
358 extern void octeon_fixup_irqs(void);
359 
360 extern struct semaphore octeon_bootbus_sem;
361 
362 struct irq_domain *octeon_irq_get_block_domain(int node, uint8_t block);
363 
364 #endif /* __ASM_OCTEON_OCTEON_H */
365