xref: /openbmc/linux/drivers/net/arcnet/com20020.c (revision 13b5ffa0)
1 /*
2  * Linux ARCnet driver - COM20020 chipset support
3  *
4  * Written 1997 by David Woodhouse.
5  * Written 1994-1999 by Avery Pennarun.
6  * Written 1999 by Martin Mares <mj@ucw.cz>.
7  * Derived from skeleton.c by Donald Becker.
8  *
9  * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
10  *  for sponsoring the further development of this driver.
11  *
12  * **********************
13  *
14  * The original copyright of skeleton.c was as follows:
15  *
16  * skeleton.c Written 1993 by Donald Becker.
17  * Copyright 1993 United States Government as represented by the
18  * Director, National Security Agency.  This software may only be used
19  * and distributed according to the terms of the GNU General Public License as
20  * modified by SRC, incorporated herein by reference.
21  *
22  * **********************
23  *
24  * For more details, see drivers/net/arcnet.c
25  *
26  * **********************
27  */
28 
29 #define pr_fmt(fmt) "arcnet:" KBUILD_MODNAME ": " fmt
30 
31 #include <linux/module.h>
32 #include <linux/kernel.h>
33 #include <linux/types.h>
34 #include <linux/ioport.h>
35 #include <linux/errno.h>
36 #include <linux/delay.h>
37 #include <linux/netdevice.h>
38 #include <linux/init.h>
39 #include <linux/interrupt.h>
40 #include <linux/io.h>
41 
42 #include "arcdevice.h"
43 #include "com20020.h"
44 
45 static const char * const clockrates[] = {
46 	"XXXXXXX", "XXXXXXXX", "XXXXXX", "2.5 Mb/s",
47 	"1.25Mb/s", "625 Kb/s", "312.5 Kb/s", "156.25 Kb/s",
48 	"Reserved", "Reserved", "Reserved"
49 };
50 
51 static void com20020_command(struct net_device *dev, int command);
52 static int com20020_status(struct net_device *dev);
53 static void com20020_setmask(struct net_device *dev, int mask);
54 static int com20020_reset(struct net_device *dev, int really_reset);
55 static void com20020_copy_to_card(struct net_device *dev, int bufnum,
56 				  int offset, void *buf, int count);
57 static void com20020_copy_from_card(struct net_device *dev, int bufnum,
58 				    int offset, void *buf, int count);
59 static void com20020_set_mc_list(struct net_device *dev);
60 static void com20020_close(struct net_device *);
61 
com20020_copy_from_card(struct net_device * dev,int bufnum,int offset,void * buf,int count)62 static void com20020_copy_from_card(struct net_device *dev, int bufnum,
63 				    int offset, void *buf, int count)
64 {
65 	int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
66 
67 	/* set up the address register */
68 	arcnet_outb((ofs >> 8) | RDDATAflag | AUTOINCflag,
69 		    ioaddr, COM20020_REG_W_ADDR_HI);
70 	arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
71 
72 	/* copy the data */
73 	TIME(dev, "insb", count,
74 	     arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
75 }
76 
com20020_copy_to_card(struct net_device * dev,int bufnum,int offset,void * buf,int count)77 static void com20020_copy_to_card(struct net_device *dev, int bufnum,
78 				  int offset, void *buf, int count)
79 {
80 	int ioaddr = dev->base_addr, ofs = 512 * bufnum + offset;
81 
82 	/* set up the address register */
83 	arcnet_outb((ofs >> 8) | AUTOINCflag, ioaddr, COM20020_REG_W_ADDR_HI);
84 	arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
85 
86 	/* copy the data */
87 	TIME(dev, "outsb", count,
88 	     arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
89 }
90 
91 /* Reset the card and check some basic stuff during the detection stage. */
com20020_check(struct net_device * dev)92 int com20020_check(struct net_device *dev)
93 {
94 	int ioaddr = dev->base_addr, status;
95 	struct arcnet_local *lp = netdev_priv(dev);
96 
97 	arcnet_outb(XTOcfg(3) | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
98 	udelay(5);
99 	arcnet_outb(XTOcfg(3), ioaddr, COM20020_REG_W_CONFIG);
100 	mdelay(RESETtime);
101 
102 	lp->setup = lp->clockm ? 0 : (lp->clockp << 1);
103 	lp->setup2 = (lp->clockm << 4) | 8;
104 
105 	/* CHECK: should we do this for SOHARD cards ? */
106 	/* Enable P1Mode for backplane mode */
107 	lp->setup = lp->setup | P1MODE;
108 
109 	com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
110 	arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
111 
112 	if (lp->clockm != 0) {
113 		com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
114 		arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
115 
116 		/* must now write the magic "restart operation" command */
117 		mdelay(1);
118 		arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
119 	}
120 
121 	lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
122 	/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
123 	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
124 	arcnet_outb(0x42, ioaddr, COM20020_REG_W_XREG);
125 
126 	status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
127 
128 	if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) {
129 		arc_printk(D_NORMAL, dev, "status invalid (%Xh).\n", status);
130 		return -ENODEV;
131 	}
132 	arc_printk(D_INIT_REASONS, dev, "status after reset: %X\n", status);
133 
134 	arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
135 		    ioaddr, COM20020_REG_W_COMMAND);
136 	status = arcnet_inb(ioaddr, COM20020_REG_R_STATUS);
137 	arc_printk(D_INIT_REASONS, dev, "status after reset acknowledged: %X\n",
138 		   status);
139 
140 	/* Read first location of memory */
141 	arcnet_outb(0 | RDDATAflag | AUTOINCflag,
142 		    ioaddr, COM20020_REG_W_ADDR_HI);
143 	arcnet_outb(0, ioaddr, COM20020_REG_W_ADDR_LO);
144 
145 	status = arcnet_inb(ioaddr, COM20020_REG_RW_MEMDATA);
146 	if (status != TESTvalue) {
147 		arc_printk(D_NORMAL, dev, "Signature byte not found (%02Xh != D1h).\n",
148 			   status);
149 		return -ENODEV;
150 	}
151 	return 0;
152 }
153 
com20020_set_hwaddr(struct net_device * dev,void * addr)154 static int com20020_set_hwaddr(struct net_device *dev, void *addr)
155 {
156 	int ioaddr = dev->base_addr;
157 	struct arcnet_local *lp = netdev_priv(dev);
158 	struct sockaddr *hwaddr = addr;
159 
160 	dev_addr_set(dev, hwaddr->sa_data);
161 	com20020_set_subaddress(lp, ioaddr, SUB_NODE);
162 	arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
163 
164 	return 0;
165 }
166 
com20020_netdev_open(struct net_device * dev)167 static int com20020_netdev_open(struct net_device *dev)
168 {
169 	int ioaddr = dev->base_addr;
170 	struct arcnet_local *lp = netdev_priv(dev);
171 
172 	lp->config |= TXENcfg;
173 	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
174 
175 	return arcnet_open(dev);
176 }
177 
com20020_netdev_close(struct net_device * dev)178 static int com20020_netdev_close(struct net_device *dev)
179 {
180 	int ioaddr = dev->base_addr;
181 	struct arcnet_local *lp = netdev_priv(dev);
182 
183 	arcnet_close(dev);
184 
185 	/* disable transmitter */
186 	lp->config &= ~TXENcfg;
187 	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
188 	return 0;
189 }
190 
191 const struct net_device_ops com20020_netdev_ops = {
192 	.ndo_open	= com20020_netdev_open,
193 	.ndo_stop	= com20020_netdev_close,
194 	.ndo_start_xmit = arcnet_send_packet,
195 	.ndo_tx_timeout = arcnet_timeout,
196 	.ndo_set_mac_address = com20020_set_hwaddr,
197 	.ndo_set_rx_mode = com20020_set_mc_list,
198 };
199 
200 /* Set up the struct net_device associated with this card.  Called after
201  * probing succeeds.
202  */
com20020_found(struct net_device * dev,int shared)203 int com20020_found(struct net_device *dev, int shared)
204 {
205 	struct arcnet_local *lp;
206 	int ioaddr = dev->base_addr;
207 
208 	/* Initialize the rest of the device structure. */
209 
210 	lp = netdev_priv(dev);
211 
212 	lp->hw.owner = THIS_MODULE;
213 	lp->hw.command = com20020_command;
214 	lp->hw.status = com20020_status;
215 	lp->hw.intmask = com20020_setmask;
216 	lp->hw.reset = com20020_reset;
217 	lp->hw.copy_to_card = com20020_copy_to_card;
218 	lp->hw.copy_from_card = com20020_copy_from_card;
219 	lp->hw.close = com20020_close;
220 
221 	/* FIXME: do this some other way! */
222 	if (!dev->dev_addr[0])
223 		arcnet_set_addr(dev, arcnet_inb(ioaddr, 8));
224 
225 	com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
226 	arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
227 
228 	if (lp->card_flags & ARC_CAN_10MBIT) {
229 		com20020_set_subaddress(lp, ioaddr, SUB_SETUP2);
230 		arcnet_outb(lp->setup2, ioaddr, COM20020_REG_W_XREG);
231 
232 		/* must now write the magic "restart operation" command */
233 		mdelay(1);
234 		arcnet_outb(STARTIOcmd, ioaddr, COM20020_REG_W_COMMAND);
235 	}
236 
237 	lp->config = (lp->timeout << 3) | (lp->backplane << 2) | SUB_NODE;
238 	/* Default 0x38 + register: Node ID */
239 	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
240 	arcnet_outb(dev->dev_addr[0], ioaddr, COM20020_REG_W_XREG);
241 
242 	/* reserve the irq */
243 	if (request_irq(dev->irq, arcnet_interrupt, shared,
244 			"arcnet (COM20020)", dev)) {
245 		arc_printk(D_NORMAL, dev, "Can't get IRQ %d!\n", dev->irq);
246 		return -ENODEV;
247 	}
248 
249 	arc_printk(D_NORMAL, dev, "%s: station %02Xh found at %03lXh, IRQ %d.\n",
250 		   lp->card_name, dev->dev_addr[0], dev->base_addr, dev->irq);
251 
252 	if (lp->backplane)
253 		arc_printk(D_NORMAL, dev, "Using backplane mode.\n");
254 
255 	if (lp->timeout != 3)
256 		arc_printk(D_NORMAL, dev, "Using extended timeout value of %d\n",
257 			   lp->timeout);
258 
259 	arc_printk(D_NORMAL, dev, "Using CKP %d - data rate %s\n",
260 		   lp->setup >> 1,
261 		   clockrates[3 -
262 			      ((lp->setup2 & 0xF0) >> 4) +
263 			      ((lp->setup & 0x0F) >> 1)]);
264 			/* The clockrates array index looks very fragile.
265 			 * It seems like it could have negative indexing.
266 			 */
267 
268 	if (register_netdev(dev)) {
269 		free_irq(dev->irq, dev);
270 		return -EIO;
271 	}
272 	return 0;
273 }
274 
275 /* Do a hardware reset on the card, and set up necessary registers.
276  *
277  * This should be called as little as possible, because it disrupts the
278  * token on the network (causes a RECON) and requires a significant delay.
279  *
280  * However, it does make sure the card is in a defined state.
281  */
com20020_reset(struct net_device * dev,int really_reset)282 static int com20020_reset(struct net_device *dev, int really_reset)
283 {
284 	struct arcnet_local *lp = netdev_priv(dev);
285 	u_int ioaddr = dev->base_addr;
286 	u_char inbyte;
287 
288 	arc_printk(D_DEBUG, dev, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
289 		   __FILE__, __LINE__, __func__, dev, lp, dev->name);
290 	arc_printk(D_INIT, dev, "Resetting %s (status=%02Xh)\n",
291 		   dev->name, arcnet_inb(ioaddr, COM20020_REG_R_STATUS));
292 
293 	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
294 	lp->config |= (lp->timeout << 3) | (lp->backplane << 2);
295 	/* power-up defaults */
296 	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
297 	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
298 
299 	if (really_reset) {
300 		/* reset the card */
301 		arcnet_outb(lp->config | RESETcfg, ioaddr, COM20020_REG_W_CONFIG);
302 		udelay(5);
303 		arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
304 		mdelay(RESETtime * 2);
305 				/* COM20020 seems to be slower sometimes */
306 	}
307 	/* clear flags & end reset */
308 	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
309 	arcnet_outb(CFLAGScmd | RESETclear | CONFIGclear,
310 		    ioaddr, COM20020_REG_W_COMMAND);
311 
312 	/* verify that the ARCnet signature byte is present */
313 	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
314 
315 	com20020_copy_from_card(dev, 0, 0, &inbyte, 1);
316 	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
317 	if (inbyte != TESTvalue) {
318 		arc_printk(D_DEBUG, dev, "%s: %d: %s\n",
319 			   __FILE__, __LINE__, __func__);
320 		arc_printk(D_NORMAL, dev, "reset failed: TESTvalue not present.\n");
321 		return 1;
322 	}
323 	/* enable extended (512-byte) packets */
324 	arcnet_outb(CONFIGcmd | EXTconf, ioaddr, COM20020_REG_W_COMMAND);
325 
326 	arc_printk(D_DEBUG, dev, "%s: %d: %s\n", __FILE__, __LINE__, __func__);
327 
328 	/* done!  return success. */
329 	return 0;
330 }
331 
com20020_setmask(struct net_device * dev,int mask)332 static void com20020_setmask(struct net_device *dev, int mask)
333 {
334 	u_int ioaddr = dev->base_addr;
335 
336 	arc_printk(D_DURING, dev, "Setting mask to %x at %x\n", mask, ioaddr);
337 	arcnet_outb(mask, ioaddr, COM20020_REG_W_INTMASK);
338 }
339 
com20020_command(struct net_device * dev,int cmd)340 static void com20020_command(struct net_device *dev, int cmd)
341 {
342 	u_int ioaddr = dev->base_addr;
343 
344 	arcnet_outb(cmd, ioaddr, COM20020_REG_W_COMMAND);
345 }
346 
com20020_status(struct net_device * dev)347 static int com20020_status(struct net_device *dev)
348 {
349 	u_int ioaddr = dev->base_addr;
350 
351 	return arcnet_inb(ioaddr, COM20020_REG_R_STATUS) +
352 		(arcnet_inb(ioaddr, COM20020_REG_R_DIAGSTAT) << 8);
353 }
354 
com20020_close(struct net_device * dev)355 static void com20020_close(struct net_device *dev)
356 {
357 	struct arcnet_local *lp = netdev_priv(dev);
358 	int ioaddr = dev->base_addr;
359 
360 	/* disable transmitter */
361 	lp->config &= ~TXENcfg;
362 	arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
363 }
364 
365 /* Set or clear the multicast filter for this adaptor.
366  * num_addrs == -1    Promiscuous mode, receive all packets
367  * num_addrs == 0       Normal mode, clear multicast list
368  * num_addrs > 0        Multicast mode, receive normal and MC packets, and do
369  *                      best-effort filtering.
370  *      FIXME - do multicast stuff, not just promiscuous.
371  */
com20020_set_mc_list(struct net_device * dev)372 static void com20020_set_mc_list(struct net_device *dev)
373 {
374 	struct arcnet_local *lp = netdev_priv(dev);
375 	int ioaddr = dev->base_addr;
376 
377 	if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) {
378 		/* Enable promiscuous mode */
379 		if (!(lp->setup & PROMISCset))
380 			arc_printk(D_NORMAL, dev, "Setting promiscuous flag...\n");
381 		com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
382 		lp->setup |= PROMISCset;
383 		arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
384 	} else {
385 		/* Disable promiscuous mode, use normal mode */
386 		if ((lp->setup & PROMISCset))
387 			arc_printk(D_NORMAL, dev, "Resetting promiscuous flag...\n");
388 		com20020_set_subaddress(lp, ioaddr, SUB_SETUP1);
389 		lp->setup &= ~PROMISCset;
390 		arcnet_outb(lp->setup, ioaddr, COM20020_REG_W_XREG);
391 	}
392 }
393 
394 #if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \
395     defined(CONFIG_ARCNET_COM20020_ISA_MODULE) || \
396     defined(CONFIG_ARCNET_COM20020_CS_MODULE)
397 EXPORT_SYMBOL(com20020_check);
398 EXPORT_SYMBOL(com20020_found);
399 EXPORT_SYMBOL(com20020_netdev_ops);
400 #endif
401 
402 MODULE_LICENSE("GPL");
403 
404 #ifdef MODULE
405 
com20020_module_init(void)406 static int __init com20020_module_init(void)
407 {
408 	if (BUGLVL(D_NORMAL))
409 		pr_info("%s\n", "COM20020 chipset support (by David Woodhouse et al.)");
410 	return 0;
411 }
412 
com20020_module_exit(void)413 static void __exit com20020_module_exit(void)
414 {
415 }
416 module_init(com20020_module_init);
417 module_exit(com20020_module_exit);
418 #endif				/* MODULE */
419