1 // SPDX-License-Identifier: GPL-2.0-only
2 /* Linux driver for devices based on the DiBcom DiB0700 USB bridge
3 *
4 * Copyright (C) 2005-6 DiBcom, SA
5 */
6 #include "dib0700.h"
7
8 /* debug */
9 int dvb_usb_dib0700_debug;
10 module_param_named(debug,dvb_usb_dib0700_debug, int, 0644);
11 MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-able))." DVB_USB_DEBUG_STATUS);
12
13 static int nb_packet_buffer_size = 21;
14 module_param(nb_packet_buffer_size, int, 0644);
15 MODULE_PARM_DESC(nb_packet_buffer_size,
16 "Set the dib0700 driver data buffer size. This parameter corresponds to the number of TS packets. The actual size of the data buffer corresponds to this parameter multiplied by 188 (default: 21)");
17
18 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
19
20
dib0700_get_version(struct dvb_usb_device * d,u32 * hwversion,u32 * romversion,u32 * ramversion,u32 * fwtype)21 int dib0700_get_version(struct dvb_usb_device *d, u32 *hwversion,
22 u32 *romversion, u32 *ramversion, u32 *fwtype)
23 {
24 struct dib0700_state *st = d->priv;
25 int ret;
26
27 if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
28 err("could not acquire lock");
29 return -EINTR;
30 }
31
32 ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
33 REQUEST_GET_VERSION,
34 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
35 st->buf, 16, USB_CTRL_GET_TIMEOUT);
36 if (hwversion != NULL)
37 *hwversion = (st->buf[0] << 24) | (st->buf[1] << 16) |
38 (st->buf[2] << 8) | st->buf[3];
39 if (romversion != NULL)
40 *romversion = (st->buf[4] << 24) | (st->buf[5] << 16) |
41 (st->buf[6] << 8) | st->buf[7];
42 if (ramversion != NULL)
43 *ramversion = (st->buf[8] << 24) | (st->buf[9] << 16) |
44 (st->buf[10] << 8) | st->buf[11];
45 if (fwtype != NULL)
46 *fwtype = (st->buf[12] << 24) | (st->buf[13] << 16) |
47 (st->buf[14] << 8) | st->buf[15];
48 mutex_unlock(&d->usb_mutex);
49 return ret;
50 }
51
52 /* expecting rx buffer: request data[0] data[1] ... data[2] */
dib0700_ctrl_wr(struct dvb_usb_device * d,u8 * tx,u8 txlen)53 static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
54 {
55 int status;
56
57 deb_data(">>> ");
58 debug_dump(tx, txlen, deb_data);
59
60 status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0),
61 tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen,
62 USB_CTRL_GET_TIMEOUT);
63
64 if (status != txlen)
65 deb_data("ep 0 write error (status = %d, len: %d)\n",status,txlen);
66
67 return status < 0 ? status : 0;
68 }
69
70 /* expecting tx buffer: request data[0] ... data[n] (n <= 4) */
dib0700_ctrl_rd(struct dvb_usb_device * d,u8 * tx,u8 txlen,u8 * rx,u8 rxlen)71 int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen)
72 {
73 u16 index, value;
74 int status;
75
76 if (txlen < 2) {
77 err("tx buffer length is smaller than 2. Makes no sense.");
78 return -EINVAL;
79 }
80 if (txlen > 4) {
81 err("tx buffer length is larger than 4. Not supported.");
82 return -EINVAL;
83 }
84
85 deb_data(">>> ");
86 debug_dump(tx,txlen,deb_data);
87
88 value = ((txlen - 2) << 8) | tx[1];
89 index = 0;
90 if (txlen > 2)
91 index |= (tx[2] << 8);
92 if (txlen > 3)
93 index |= tx[3];
94
95 status = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), tx[0],
96 USB_TYPE_VENDOR | USB_DIR_IN, value, index, rx, rxlen,
97 USB_CTRL_GET_TIMEOUT);
98
99 if (status < 0)
100 deb_info("ep 0 read error (status = %d)\n",status);
101
102 deb_data("<<< ");
103 debug_dump(rx, rxlen, deb_data);
104
105 return status; /* length in case of success */
106 }
107
dib0700_set_gpio(struct dvb_usb_device * d,enum dib07x0_gpios gpio,u8 gpio_dir,u8 gpio_val)108 int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
109 {
110 struct dib0700_state *st = d->priv;
111 int ret;
112
113 if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
114 err("could not acquire lock");
115 return -EINTR;
116 }
117
118 st->buf[0] = REQUEST_SET_GPIO;
119 st->buf[1] = gpio;
120 st->buf[2] = ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6);
121
122 ret = dib0700_ctrl_wr(d, st->buf, 3);
123
124 mutex_unlock(&d->usb_mutex);
125 return ret;
126 }
127
dib0700_set_usb_xfer_len(struct dvb_usb_device * d,u16 nb_ts_packets)128 static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
129 {
130 struct dib0700_state *st = d->priv;
131 int ret;
132
133 if (st->fw_version >= 0x10201) {
134 if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
135 err("could not acquire lock");
136 return -EINTR;
137 }
138
139 st->buf[0] = REQUEST_SET_USB_XFER_LEN;
140 st->buf[1] = (nb_ts_packets >> 8) & 0xff;
141 st->buf[2] = nb_ts_packets & 0xff;
142
143 deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
144
145 ret = dib0700_ctrl_wr(d, st->buf, 3);
146 mutex_unlock(&d->usb_mutex);
147 } else {
148 deb_info("this firmware does not allow to change the USB xfer len\n");
149 ret = -EIO;
150 }
151
152 return ret;
153 }
154
155 /*
156 * I2C master xfer function (supported in 1.20 firmware)
157 */
dib0700_i2c_xfer_new(struct i2c_adapter * adap,struct i2c_msg * msg,int num)158 static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
159 int num)
160 {
161 /* The new i2c firmware messages are more reliable and in particular
162 properly support i2c read calls not preceded by a write */
163
164 struct dvb_usb_device *d = i2c_get_adapdata(adap);
165 struct dib0700_state *st = d->priv;
166 uint8_t bus_mode = 1; /* 0=eeprom bus, 1=frontend bus */
167 uint8_t gen_mode = 0; /* 0=master i2c, 1=gpio i2c */
168 uint8_t en_start = 0;
169 uint8_t en_stop = 0;
170 int result, i;
171
172 /* Ensure nobody else hits the i2c bus while we're sending our
173 sequence of messages, (such as the remote control thread) */
174 if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
175 return -EINTR;
176
177 for (i = 0; i < num; i++) {
178 if (i == 0) {
179 /* First message in the transaction */
180 en_start = 1;
181 } else if (!(msg[i].flags & I2C_M_NOSTART)) {
182 /* Device supports repeated-start */
183 en_start = 1;
184 } else {
185 /* Not the first packet and device doesn't support
186 repeated start */
187 en_start = 0;
188 }
189 if (i == (num - 1)) {
190 /* Last message in the transaction */
191 en_stop = 1;
192 }
193
194 if (msg[i].flags & I2C_M_RD) {
195 /* Read request */
196 u16 index, value;
197 uint8_t i2c_dest;
198
199 i2c_dest = (msg[i].addr << 1);
200 value = ((en_start << 7) | (en_stop << 6) |
201 (msg[i].len & 0x3F)) << 8 | i2c_dest;
202 /* I2C ctrl + FE bus; */
203 index = ((gen_mode << 6) & 0xC0) |
204 ((bus_mode << 4) & 0x30);
205
206 result = usb_control_msg(d->udev,
207 usb_rcvctrlpipe(d->udev, 0),
208 REQUEST_NEW_I2C_READ,
209 USB_TYPE_VENDOR | USB_DIR_IN,
210 value, index, st->buf,
211 msg[i].len,
212 USB_CTRL_GET_TIMEOUT);
213 if (result < 0) {
214 deb_info("i2c read error (status = %d)\n", result);
215 goto unlock;
216 }
217
218 if (msg[i].len > sizeof(st->buf)) {
219 deb_info("buffer too small to fit %d bytes\n",
220 msg[i].len);
221 result = -EIO;
222 goto unlock;
223 }
224
225 memcpy(msg[i].buf, st->buf, msg[i].len);
226
227 deb_data("<<< ");
228 debug_dump(msg[i].buf, msg[i].len, deb_data);
229
230 } else {
231 /* Write request */
232 if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
233 err("could not acquire lock");
234 result = -EINTR;
235 goto unlock;
236 }
237 st->buf[0] = REQUEST_NEW_I2C_WRITE;
238 st->buf[1] = msg[i].addr << 1;
239 st->buf[2] = (en_start << 7) | (en_stop << 6) |
240 (msg[i].len & 0x3F);
241 /* I2C ctrl + FE bus; */
242 st->buf[3] = ((gen_mode << 6) & 0xC0) |
243 ((bus_mode << 4) & 0x30);
244
245 if (msg[i].len > sizeof(st->buf) - 4) {
246 deb_info("i2c message to big: %d\n",
247 msg[i].len);
248 mutex_unlock(&d->usb_mutex);
249 result = -EIO;
250 goto unlock;
251 }
252
253 /* The Actual i2c payload */
254 memcpy(&st->buf[4], msg[i].buf, msg[i].len);
255
256 deb_data(">>> ");
257 debug_dump(st->buf, msg[i].len + 4, deb_data);
258
259 result = usb_control_msg(d->udev,
260 usb_sndctrlpipe(d->udev, 0),
261 REQUEST_NEW_I2C_WRITE,
262 USB_TYPE_VENDOR | USB_DIR_OUT,
263 0, 0, st->buf, msg[i].len + 4,
264 USB_CTRL_GET_TIMEOUT);
265 mutex_unlock(&d->usb_mutex);
266 if (result < 0) {
267 deb_info("i2c write error (status = %d)\n", result);
268 break;
269 }
270 }
271 }
272 result = i;
273
274 unlock:
275 mutex_unlock(&d->i2c_mutex);
276 return result;
277 }
278
279 /*
280 * I2C master xfer function (pre-1.20 firmware)
281 */
dib0700_i2c_xfer_legacy(struct i2c_adapter * adap,struct i2c_msg * msg,int num)282 static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
283 struct i2c_msg *msg, int num)
284 {
285 struct dvb_usb_device *d = i2c_get_adapdata(adap);
286 struct dib0700_state *st = d->priv;
287 int i, len, result;
288
289 if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
290 return -EINTR;
291 if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
292 err("could not acquire lock");
293 mutex_unlock(&d->i2c_mutex);
294 return -EINTR;
295 }
296
297 for (i = 0; i < num; i++) {
298 /* fill in the address */
299 st->buf[1] = msg[i].addr << 1;
300 /* fill the buffer */
301 if (msg[i].len > sizeof(st->buf) - 2) {
302 deb_info("i2c xfer to big: %d\n",
303 msg[i].len);
304 result = -EIO;
305 goto unlock;
306 }
307 memcpy(&st->buf[2], msg[i].buf, msg[i].len);
308
309 /* write/read request */
310 if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) {
311 st->buf[0] = REQUEST_I2C_READ;
312 st->buf[1] |= 1;
313
314 /* special thing in the current firmware: when length is zero the read-failed */
315 len = dib0700_ctrl_rd(d, st->buf, msg[i].len + 2,
316 st->buf, msg[i + 1].len);
317 if (len <= 0) {
318 deb_info("I2C read failed on address 0x%02x\n",
319 msg[i].addr);
320 result = -EIO;
321 goto unlock;
322 }
323
324 if (msg[i + 1].len > sizeof(st->buf)) {
325 deb_info("i2c xfer buffer to small for %d\n",
326 msg[i].len);
327 result = -EIO;
328 goto unlock;
329 }
330 memcpy(msg[i + 1].buf, st->buf, msg[i + 1].len);
331
332 msg[i+1].len = len;
333
334 i++;
335 } else {
336 st->buf[0] = REQUEST_I2C_WRITE;
337 result = dib0700_ctrl_wr(d, st->buf, msg[i].len + 2);
338 if (result < 0)
339 goto unlock;
340 }
341 }
342 result = i;
343 unlock:
344 mutex_unlock(&d->usb_mutex);
345 mutex_unlock(&d->i2c_mutex);
346
347 return result;
348 }
349
dib0700_i2c_xfer(struct i2c_adapter * adap,struct i2c_msg * msg,int num)350 static int dib0700_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
351 int num)
352 {
353 struct dvb_usb_device *d = i2c_get_adapdata(adap);
354 struct dib0700_state *st = d->priv;
355
356 if (st->fw_use_new_i2c_api == 1) {
357 /* User running at least fw 1.20 */
358 return dib0700_i2c_xfer_new(adap, msg, num);
359 } else {
360 /* Use legacy calls */
361 return dib0700_i2c_xfer_legacy(adap, msg, num);
362 }
363 }
364
dib0700_i2c_func(struct i2c_adapter * adapter)365 static u32 dib0700_i2c_func(struct i2c_adapter *adapter)
366 {
367 return I2C_FUNC_I2C;
368 }
369
370 struct i2c_algorithm dib0700_i2c_algo = {
371 .master_xfer = dib0700_i2c_xfer,
372 .functionality = dib0700_i2c_func,
373 };
374
dib0700_identify_state(struct usb_device * udev,const struct dvb_usb_device_properties * props,const struct dvb_usb_device_description ** desc,int * cold)375 int dib0700_identify_state(struct usb_device *udev,
376 const struct dvb_usb_device_properties *props,
377 const struct dvb_usb_device_description **desc,
378 int *cold)
379 {
380 s16 ret;
381 u8 *b;
382
383 b = kmalloc(16, GFP_KERNEL);
384 if (!b)
385 return -ENOMEM;
386
387
388 ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
389 REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, 16, USB_CTRL_GET_TIMEOUT);
390
391 deb_info("FW GET_VERSION length: %d\n",ret);
392
393 *cold = ret <= 0;
394 deb_info("cold: %d\n", *cold);
395
396 kfree(b);
397 return 0;
398 }
399
dib0700_set_clock(struct dvb_usb_device * d,u8 en_pll,u8 pll_src,u8 pll_range,u8 clock_gpio3,u16 pll_prediv,u16 pll_loopdiv,u16 free_div,u16 dsuScaler)400 static int dib0700_set_clock(struct dvb_usb_device *d, u8 en_pll,
401 u8 pll_src, u8 pll_range, u8 clock_gpio3, u16 pll_prediv,
402 u16 pll_loopdiv, u16 free_div, u16 dsuScaler)
403 {
404 struct dib0700_state *st = d->priv;
405 int ret;
406
407 if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
408 err("could not acquire lock");
409 return -EINTR;
410 }
411
412 st->buf[0] = REQUEST_SET_CLOCK;
413 st->buf[1] = (en_pll << 7) | (pll_src << 6) |
414 (pll_range << 5) | (clock_gpio3 << 4);
415 st->buf[2] = (pll_prediv >> 8) & 0xff; /* MSB */
416 st->buf[3] = pll_prediv & 0xff; /* LSB */
417 st->buf[4] = (pll_loopdiv >> 8) & 0xff; /* MSB */
418 st->buf[5] = pll_loopdiv & 0xff; /* LSB */
419 st->buf[6] = (free_div >> 8) & 0xff; /* MSB */
420 st->buf[7] = free_div & 0xff; /* LSB */
421 st->buf[8] = (dsuScaler >> 8) & 0xff; /* MSB */
422 st->buf[9] = dsuScaler & 0xff; /* LSB */
423
424 ret = dib0700_ctrl_wr(d, st->buf, 10);
425 mutex_unlock(&d->usb_mutex);
426
427 return ret;
428 }
429
dib0700_set_i2c_speed(struct dvb_usb_device * d,u16 scl_kHz)430 int dib0700_set_i2c_speed(struct dvb_usb_device *d, u16 scl_kHz)
431 {
432 struct dib0700_state *st = d->priv;
433 u16 divider;
434 int ret;
435
436 if (scl_kHz == 0)
437 return -EINVAL;
438
439 if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
440 err("could not acquire lock");
441 return -EINTR;
442 }
443
444 st->buf[0] = REQUEST_SET_I2C_PARAM;
445 divider = (u16) (30000 / scl_kHz);
446 st->buf[1] = 0;
447 st->buf[2] = (u8) (divider >> 8);
448 st->buf[3] = (u8) (divider & 0xff);
449 divider = (u16) (72000 / scl_kHz);
450 st->buf[4] = (u8) (divider >> 8);
451 st->buf[5] = (u8) (divider & 0xff);
452 divider = (u16) (72000 / scl_kHz); /* clock: 72MHz */
453 st->buf[6] = (u8) (divider >> 8);
454 st->buf[7] = (u8) (divider & 0xff);
455
456 deb_info("setting I2C speed: %04x %04x %04x (%d kHz).",
457 (st->buf[2] << 8) | (st->buf[3]), (st->buf[4] << 8) |
458 st->buf[5], (st->buf[6] << 8) | st->buf[7], scl_kHz);
459
460 ret = dib0700_ctrl_wr(d, st->buf, 8);
461 mutex_unlock(&d->usb_mutex);
462
463 return ret;
464 }
465
466
dib0700_ctrl_clock(struct dvb_usb_device * d,u32 clk_MHz,u8 clock_out_gp3)467 int dib0700_ctrl_clock(struct dvb_usb_device *d, u32 clk_MHz, u8 clock_out_gp3)
468 {
469 switch (clk_MHz) {
470 case 72: dib0700_set_clock(d, 1, 0, 1, clock_out_gp3, 2, 24, 0, 0x4c); break;
471 default: return -EINVAL;
472 }
473 return 0;
474 }
475
dib0700_jumpram(struct usb_device * udev,u32 address)476 static int dib0700_jumpram(struct usb_device *udev, u32 address)
477 {
478 int ret = 0, actlen;
479 u8 *buf;
480
481 buf = kmalloc(8, GFP_KERNEL);
482 if (!buf)
483 return -ENOMEM;
484 buf[0] = REQUEST_JUMPRAM;
485 buf[1] = 0;
486 buf[2] = 0;
487 buf[3] = 0;
488 buf[4] = (address >> 24) & 0xff;
489 buf[5] = (address >> 16) & 0xff;
490 buf[6] = (address >> 8) & 0xff;
491 buf[7] = address & 0xff;
492
493 if ((ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x01),buf,8,&actlen,1000)) < 0) {
494 deb_fw("jumpram to 0x%x failed\n",address);
495 goto out;
496 }
497 if (actlen != 8) {
498 deb_fw("jumpram to 0x%x failed\n",address);
499 ret = -EIO;
500 goto out;
501 }
502 out:
503 kfree(buf);
504 return ret;
505 }
506
dib0700_download_firmware(struct usb_device * udev,const struct firmware * fw)507 int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw)
508 {
509 struct hexline hx;
510 int pos = 0, ret, act_len, i, adap_num;
511 u8 *buf;
512 u32 fw_version;
513
514 buf = kmalloc(260, GFP_KERNEL);
515 if (!buf)
516 return -ENOMEM;
517
518 while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) {
519 deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",
520 hx.addr, hx.len, hx.chk);
521
522 buf[0] = hx.len;
523 buf[1] = (hx.addr >> 8) & 0xff;
524 buf[2] = hx.addr & 0xff;
525 buf[3] = hx.type;
526 memcpy(&buf[4],hx.data,hx.len);
527 buf[4+hx.len] = hx.chk;
528
529 ret = usb_bulk_msg(udev,
530 usb_sndbulkpipe(udev, 0x01),
531 buf,
532 hx.len + 5,
533 &act_len,
534 1000);
535
536 if (ret < 0) {
537 err("firmware download failed at %d with %d",pos,ret);
538 goto out;
539 }
540 }
541
542 if (ret == 0) {
543 /* start the firmware */
544 if ((ret = dib0700_jumpram(udev, 0x70000000)) == 0) {
545 info("firmware started successfully.");
546 msleep(500);
547 }
548 } else
549 ret = -EIO;
550
551 /* the number of ts packet has to be at least 1 */
552 if (nb_packet_buffer_size < 1)
553 nb_packet_buffer_size = 1;
554
555 /* get the firmware version */
556 usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
557 REQUEST_GET_VERSION,
558 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
559 buf, 16, USB_CTRL_GET_TIMEOUT);
560 fw_version = (buf[8] << 24) | (buf[9] << 16) | (buf[10] << 8) | buf[11];
561
562 /* set the buffer size - DVB-USB is allocating URB buffers
563 * only after the firwmare download was successful */
564 for (i = 0; i < dib0700_device_count; i++) {
565 for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters;
566 adap_num++) {
567 if (fw_version >= 0x10201) {
568 dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
569 } else {
570 /* for fw version older than 1.20.1,
571 * the buffersize has to be n times 512 */
572 dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
573 if (dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize < 512)
574 dib0700_devices[i].adapter[adap_num].fe[0].stream.u.bulk.buffersize = 512;
575 }
576 }
577 }
578 out:
579 kfree(buf);
580 return ret;
581 }
582
dib0700_streaming_ctrl(struct dvb_usb_adapter * adap,int onoff)583 int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
584 {
585 struct dib0700_state *st = adap->dev->priv;
586 int ret, adapt_nr;
587
588 if ((onoff != 0) && (st->fw_version >= 0x10201)) {
589 /* for firmware later than 1.20.1,
590 * the USB xfer length can be set */
591 ret = dib0700_set_usb_xfer_len(adap->dev,
592 st->nb_packet_buffer_size);
593 if (ret < 0) {
594 deb_info("can not set the USB xfer len\n");
595 return ret;
596 }
597 }
598
599 mutex_lock(&adap->dev->usb_mutex);
600
601 st->buf[0] = REQUEST_ENABLE_VIDEO;
602 /* this bit gives a kind of command,
603 * rather than enabling something or not */
604 st->buf[1] = (onoff << 4) | 0x00;
605
606 if (st->disable_streaming_master_mode == 1)
607 st->buf[2] = 0x00;
608 else
609 st->buf[2] = 0x01 << 4; /* Master mode */
610
611 st->buf[3] = 0x00;
612
613 if ((adap->fe_adap[0].stream.props.endpoint != 2)
614 && (adap->fe_adap[0].stream.props.endpoint != 3)) {
615 deb_info("the endpoint number (%i) is not correct, use the adapter id instead\n",
616 adap->fe_adap[0].stream.props.endpoint);
617 adapt_nr = adap->id;
618 } else {
619 adapt_nr = adap->fe_adap[0].stream.props.endpoint - 2;
620 }
621
622 if (onoff)
623 st->channel_state |= 1 << adapt_nr;
624 else
625 st->channel_state &= ~(1 << adapt_nr);
626
627 st->buf[2] |= st->channel_state;
628
629 deb_info("adapter %d, streaming %s: %*ph\n",
630 adapt_nr, onoff ? "ON" : "OFF", 3, st->buf);
631
632 ret = dib0700_ctrl_wr(adap->dev, st->buf, 4);
633 mutex_unlock(&adap->dev->usb_mutex);
634
635 return ret;
636 }
637
dib0700_change_protocol(struct rc_dev * rc,u64 * rc_proto)638 int dib0700_change_protocol(struct rc_dev *rc, u64 *rc_proto)
639 {
640 struct dvb_usb_device *d = rc->priv;
641 struct dib0700_state *st = d->priv;
642 int new_proto, ret;
643
644 if (mutex_lock_interruptible(&d->usb_mutex) < 0) {
645 err("could not acquire lock");
646 return -EINTR;
647 }
648
649 st->buf[0] = REQUEST_SET_RC;
650 st->buf[1] = 0;
651 st->buf[2] = 0;
652
653 /* Set the IR mode */
654 if (*rc_proto & RC_PROTO_BIT_RC5) {
655 new_proto = 1;
656 *rc_proto = RC_PROTO_BIT_RC5;
657 } else if (*rc_proto & RC_PROTO_BIT_NEC) {
658 new_proto = 0;
659 *rc_proto = RC_PROTO_BIT_NEC;
660 } else if (*rc_proto & RC_PROTO_BIT_RC6_MCE) {
661 if (st->fw_version < 0x10200) {
662 ret = -EINVAL;
663 goto out;
664 }
665 new_proto = 2;
666 *rc_proto = RC_PROTO_BIT_RC6_MCE;
667 } else {
668 ret = -EINVAL;
669 goto out;
670 }
671
672 st->buf[1] = new_proto;
673
674 ret = dib0700_ctrl_wr(d, st->buf, 3);
675 if (ret < 0) {
676 err("ir protocol setup failed");
677 goto out;
678 }
679
680 d->props.rc.core.protocol = *rc_proto;
681
682 out:
683 mutex_unlock(&d->usb_mutex);
684 return ret;
685 }
686
687 /* This is the structure of the RC response packet starting in firmware 1.20 */
688 struct dib0700_rc_response {
689 u8 report_id;
690 u8 data_state;
691 union {
692 struct {
693 u8 system;
694 u8 not_system;
695 u8 data;
696 u8 not_data;
697 } nec;
698 struct {
699 u8 not_used;
700 u8 system;
701 u8 data;
702 u8 not_data;
703 } rc5;
704 };
705 };
706 #define RC_MSG_SIZE_V1_20 6
707
dib0700_rc_urb_completion(struct urb * purb)708 static void dib0700_rc_urb_completion(struct urb *purb)
709 {
710 struct dvb_usb_device *d = purb->context;
711 struct dib0700_rc_response *poll_reply;
712 enum rc_proto protocol;
713 u32 keycode;
714 u8 toggle;
715
716 deb_info("%s()\n", __func__);
717 if (d->rc_dev == NULL) {
718 /* This will occur if disable_rc_polling=1 */
719 kfree(purb->transfer_buffer);
720 usb_free_urb(purb);
721 return;
722 }
723
724 poll_reply = purb->transfer_buffer;
725
726 if (purb->status < 0) {
727 deb_info("discontinuing polling\n");
728 kfree(purb->transfer_buffer);
729 usb_free_urb(purb);
730 return;
731 }
732
733 if (purb->actual_length != RC_MSG_SIZE_V1_20) {
734 deb_info("malformed rc msg size=%d\n", purb->actual_length);
735 goto resubmit;
736 }
737
738 deb_data("IR ID = %02X state = %02X System = %02X %02X Cmd = %02X %02X (len %d)\n",
739 poll_reply->report_id, poll_reply->data_state,
740 poll_reply->nec.system, poll_reply->nec.not_system,
741 poll_reply->nec.data, poll_reply->nec.not_data,
742 purb->actual_length);
743
744 switch (d->props.rc.core.protocol) {
745 case RC_PROTO_BIT_NEC:
746 toggle = 0;
747
748 /* NEC protocol sends repeat code as 0 0 0 FF */
749 if (poll_reply->nec.system == 0x00 &&
750 poll_reply->nec.not_system == 0x00 &&
751 poll_reply->nec.data == 0x00 &&
752 poll_reply->nec.not_data == 0xff) {
753 poll_reply->data_state = 2;
754 rc_repeat(d->rc_dev);
755 goto resubmit;
756 }
757
758 if ((poll_reply->nec.data ^ poll_reply->nec.not_data) != 0xff) {
759 deb_data("NEC32 protocol\n");
760 keycode = RC_SCANCODE_NEC32(poll_reply->nec.system << 24 |
761 poll_reply->nec.not_system << 16 |
762 poll_reply->nec.data << 8 |
763 poll_reply->nec.not_data);
764 protocol = RC_PROTO_NEC32;
765 } else if ((poll_reply->nec.system ^ poll_reply->nec.not_system) != 0xff) {
766 deb_data("NEC extended protocol\n");
767 keycode = RC_SCANCODE_NECX(poll_reply->nec.system << 8 |
768 poll_reply->nec.not_system,
769 poll_reply->nec.data);
770
771 protocol = RC_PROTO_NECX;
772 } else {
773 deb_data("NEC normal protocol\n");
774 keycode = RC_SCANCODE_NEC(poll_reply->nec.system,
775 poll_reply->nec.data);
776 protocol = RC_PROTO_NEC;
777 }
778
779 break;
780 default:
781 deb_data("RC5 protocol\n");
782 protocol = RC_PROTO_RC5;
783 toggle = poll_reply->report_id;
784 keycode = RC_SCANCODE_RC5(poll_reply->rc5.system, poll_reply->rc5.data);
785
786 if ((poll_reply->rc5.data ^ poll_reply->rc5.not_data) != 0xff) {
787 /* Key failed integrity check */
788 err("key failed integrity check: %02x %02x %02x %02x",
789 poll_reply->rc5.not_used, poll_reply->rc5.system,
790 poll_reply->rc5.data, poll_reply->rc5.not_data);
791 goto resubmit;
792 }
793
794 break;
795 }
796
797 rc_keydown(d->rc_dev, protocol, keycode, toggle);
798
799 resubmit:
800 /* Clean the buffer before we requeue */
801 memset(purb->transfer_buffer, 0, RC_MSG_SIZE_V1_20);
802
803 /* Requeue URB */
804 usb_submit_urb(purb, GFP_ATOMIC);
805 }
806
dib0700_rc_setup(struct dvb_usb_device * d,struct usb_interface * intf)807 int dib0700_rc_setup(struct dvb_usb_device *d, struct usb_interface *intf)
808 {
809 struct dib0700_state *st = d->priv;
810 struct urb *purb;
811 const struct usb_endpoint_descriptor *e;
812 int ret, rc_ep = 1;
813 unsigned int pipe = 0;
814
815 /* Poll-based. Don't initialize bulk mode */
816 if (st->fw_version < 0x10200 || !intf)
817 return 0;
818
819 /* Starting in firmware 1.20, the RC info is provided on a bulk pipe */
820
821 if (intf->cur_altsetting->desc.bNumEndpoints < rc_ep + 1)
822 return -ENODEV;
823
824 purb = usb_alloc_urb(0, GFP_KERNEL);
825 if (purb == NULL)
826 return -ENOMEM;
827
828 purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
829 if (purb->transfer_buffer == NULL) {
830 err("rc kzalloc failed");
831 usb_free_urb(purb);
832 return -ENOMEM;
833 }
834
835 purb->status = -EINPROGRESS;
836
837 /*
838 * Some devices like the Hauppauge NovaTD model 52009 use an interrupt
839 * endpoint, while others use a bulk one.
840 */
841 e = &intf->cur_altsetting->endpoint[rc_ep].desc;
842 if (usb_endpoint_dir_in(e)) {
843 if (usb_endpoint_xfer_bulk(e)) {
844 pipe = usb_rcvbulkpipe(d->udev, rc_ep);
845 usb_fill_bulk_urb(purb, d->udev, pipe,
846 purb->transfer_buffer,
847 RC_MSG_SIZE_V1_20,
848 dib0700_rc_urb_completion, d);
849
850 } else if (usb_endpoint_xfer_int(e)) {
851 pipe = usb_rcvintpipe(d->udev, rc_ep);
852 usb_fill_int_urb(purb, d->udev, pipe,
853 purb->transfer_buffer,
854 RC_MSG_SIZE_V1_20,
855 dib0700_rc_urb_completion, d, 1);
856 }
857 }
858
859 if (!pipe) {
860 err("There's no endpoint for remote controller");
861 kfree(purb->transfer_buffer);
862 usb_free_urb(purb);
863 return 0;
864 }
865
866 ret = usb_submit_urb(purb, GFP_ATOMIC);
867 if (ret) {
868 err("rc submit urb failed");
869 kfree(purb->transfer_buffer);
870 usb_free_urb(purb);
871 }
872
873 return ret;
874 }
875
dib0700_probe(struct usb_interface * intf,const struct usb_device_id * id)876 static int dib0700_probe(struct usb_interface *intf,
877 const struct usb_device_id *id)
878 {
879 int i;
880 struct dvb_usb_device *dev;
881
882 for (i = 0; i < dib0700_device_count; i++)
883 if (dvb_usb_device_init(intf, &dib0700_devices[i], THIS_MODULE,
884 &dev, adapter_nr) == 0) {
885 struct dib0700_state *st = dev->priv;
886 u32 hwversion, romversion, fw_version, fwtype;
887
888 dib0700_get_version(dev, &hwversion, &romversion,
889 &fw_version, &fwtype);
890
891 deb_info("Firmware version: %x, %d, 0x%x, %d\n",
892 hwversion, romversion, fw_version, fwtype);
893
894 st->fw_version = fw_version;
895 st->nb_packet_buffer_size = (u32)nb_packet_buffer_size;
896
897 /* Disable polling mode on newer firmwares */
898 if (st->fw_version >= 0x10200)
899 dev->props.rc.core.bulk_mode = true;
900 else
901 dev->props.rc.core.bulk_mode = false;
902
903 dib0700_rc_setup(dev, intf);
904
905 return 0;
906 }
907
908 return -ENODEV;
909 }
910
dib0700_disconnect(struct usb_interface * intf)911 static void dib0700_disconnect(struct usb_interface *intf)
912 {
913 struct dvb_usb_device *d = usb_get_intfdata(intf);
914 struct dib0700_state *st = d->priv;
915 struct i2c_client *client;
916
917 /* remove I2C client for tuner */
918 client = st->i2c_client_tuner;
919 if (client) {
920 module_put(client->dev.driver->owner);
921 i2c_unregister_device(client);
922 }
923
924 /* remove I2C client for demodulator */
925 client = st->i2c_client_demod;
926 if (client) {
927 module_put(client->dev.driver->owner);
928 i2c_unregister_device(client);
929 }
930
931 dvb_usb_device_exit(intf);
932 }
933
934
935 static struct usb_driver dib0700_driver = {
936 .name = "dvb_usb_dib0700",
937 .probe = dib0700_probe,
938 .disconnect = dib0700_disconnect,
939 .id_table = dib0700_usb_id_table,
940 };
941
942 module_usb_driver(dib0700_driver);
943
944 MODULE_FIRMWARE("dvb-usb-dib0700-1.20.fw");
945 MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@posteo.de>");
946 MODULE_DESCRIPTION("Driver for devices based on DiBcom DiB0700 - USB bridge");
947 MODULE_VERSION("1.0");
948 MODULE_LICENSE("GPL");
949