1 /*
2 * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
3 *
4 * David A Rusling
5 *
6 * Copyright (C) 2001 ARM Limited
7 *
8 * This file is subject to the terms and conditions of the GNU General Public
9 * License. See the file COPYING in the main directory of this archive
10 * for more details.
11 */
12 #include <linux/fb.h>
13 #include <linux/amba/clcd-regs.h>
14
15 enum {
16 /* individual formats */
17 CLCD_CAP_RGB444 = (1 << 0),
18 CLCD_CAP_RGB5551 = (1 << 1),
19 CLCD_CAP_RGB565 = (1 << 2),
20 CLCD_CAP_RGB888 = (1 << 3),
21 CLCD_CAP_BGR444 = (1 << 4),
22 CLCD_CAP_BGR5551 = (1 << 5),
23 CLCD_CAP_BGR565 = (1 << 6),
24 CLCD_CAP_BGR888 = (1 << 7),
25
26 /* connection layouts */
27 CLCD_CAP_444 = CLCD_CAP_RGB444 | CLCD_CAP_BGR444,
28 CLCD_CAP_5551 = CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551,
29 CLCD_CAP_565 = CLCD_CAP_RGB565 | CLCD_CAP_BGR565,
30 CLCD_CAP_888 = CLCD_CAP_RGB888 | CLCD_CAP_BGR888,
31
32 /* red/blue ordering */
33 CLCD_CAP_RGB = CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 |
34 CLCD_CAP_RGB565 | CLCD_CAP_RGB888,
35 CLCD_CAP_BGR = CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 |
36 CLCD_CAP_BGR565 | CLCD_CAP_BGR888,
37
38 CLCD_CAP_ALL = CLCD_CAP_BGR | CLCD_CAP_RGB,
39 };
40
41 struct backlight_device;
42
43 struct clcd_panel {
44 struct fb_videomode mode;
45 signed short width; /* width in mm */
46 signed short height; /* height in mm */
47 u32 tim2;
48 u32 tim3;
49 u32 cntl;
50 u32 caps;
51 unsigned int bpp:8,
52 fixedtimings:1,
53 grayscale:1;
54 unsigned int connector;
55 struct backlight_device *backlight;
56 /*
57 * If the B/R lines are switched between the CLCD
58 * and the panel we need to know this and not try to
59 * compensate with the BGR bit in the control register.
60 */
61 bool bgr_connection;
62 };
63
64 struct clcd_regs {
65 u32 tim0;
66 u32 tim1;
67 u32 tim2;
68 u32 tim3;
69 u32 cntl;
70 unsigned long pixclock;
71 };
72
73 struct clcd_fb;
74
75 /*
76 * the board-type specific routines
77 */
78 struct clcd_board {
79 const char *name;
80
81 /*
82 * Optional. Hardware capability flags.
83 */
84 u32 caps;
85
86 /*
87 * Optional. Check whether the var structure is acceptable
88 * for this display.
89 */
90 int (*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
91
92 /*
93 * Compulsory. Decode fb->fb.var into regs->*. In the case of
94 * fixed timing, set regs->* to the register values required.
95 */
96 void (*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
97
98 /*
99 * Optional. Disable any extra display hardware.
100 */
101 void (*disable)(struct clcd_fb *);
102
103 /*
104 * Optional. Enable any extra display hardware.
105 */
106 void (*enable)(struct clcd_fb *);
107
108 /*
109 * Setup platform specific parts of CLCD driver
110 */
111 int (*setup)(struct clcd_fb *);
112
113 /*
114 * mmap the framebuffer memory
115 */
116 int (*mmap)(struct clcd_fb *, struct vm_area_struct *);
117
118 /*
119 * Remove platform specific parts of CLCD driver
120 */
121 void (*remove)(struct clcd_fb *);
122 };
123
124 struct amba_device;
125 struct clk;
126
127 /* this data structure describes each frame buffer device we find */
128 struct clcd_fb {
129 struct fb_info fb;
130 struct amba_device *dev;
131 struct clk *clk;
132 struct clcd_panel *panel;
133 struct clcd_board *board;
134 void *board_data;
135 void __iomem *regs;
136 u16 off_ienb;
137 u16 off_cntl;
138 u32 clcd_cntl;
139 u32 cmap[16];
140 bool clk_enabled;
141 };
142
clcdfb_decode(struct clcd_fb * fb,struct clcd_regs * regs)143 static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
144 {
145 struct fb_var_screeninfo *var = &fb->fb.var;
146 u32 val, cpl;
147
148 /*
149 * Program the CLCD controller registers and start the CLCD
150 */
151 val = ((var->xres / 16) - 1) << 2;
152 val |= (var->hsync_len - 1) << 8;
153 val |= (var->right_margin - 1) << 16;
154 val |= (var->left_margin - 1) << 24;
155 regs->tim0 = val;
156
157 val = var->yres;
158 if (fb->panel->cntl & CNTL_LCDDUAL)
159 val /= 2;
160 val -= 1;
161 val |= (var->vsync_len - 1) << 10;
162 val |= var->lower_margin << 16;
163 val |= var->upper_margin << 24;
164 regs->tim1 = val;
165
166 val = fb->panel->tim2;
167 val |= var->sync & FB_SYNC_HOR_HIGH_ACT ? 0 : TIM2_IHS;
168 val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
169
170 cpl = var->xres_virtual;
171 if (fb->panel->cntl & CNTL_LCDTFT) /* TFT */
172 /* / 1 */;
173 else if (!var->grayscale) /* STN color */
174 cpl = cpl * 8 / 3;
175 else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
176 cpl /= 8;
177 else /* STN monochrome, 4bit */
178 cpl /= 4;
179
180 regs->tim2 = val | ((cpl - 1) << 16);
181
182 regs->tim3 = fb->panel->tim3;
183
184 val = fb->panel->cntl;
185 if (var->grayscale)
186 val |= CNTL_LCDBW;
187
188 if (fb->panel->caps && fb->board->caps && var->bits_per_pixel >= 16) {
189 /*
190 * if board and panel supply capabilities, we can support
191 * changing BGR/RGB depending on supplied parameters. Here
192 * we switch to what the framebuffer is providing if need
193 * be, so if the framebuffer is BGR but the display connection
194 * is RGB (first case) we switch it around. Vice versa mutatis
195 * mutandis if the framebuffer is RGB but the display connection
196 * is BGR, we flip it around.
197 */
198 if (var->red.offset == 0)
199 val &= ~CNTL_BGR;
200 else
201 val |= CNTL_BGR;
202 if (fb->panel->bgr_connection)
203 val ^= CNTL_BGR;
204 }
205
206 switch (var->bits_per_pixel) {
207 case 1:
208 val |= CNTL_LCDBPP1;
209 break;
210 case 2:
211 val |= CNTL_LCDBPP2;
212 break;
213 case 4:
214 val |= CNTL_LCDBPP4;
215 break;
216 case 8:
217 val |= CNTL_LCDBPP8;
218 break;
219 case 16:
220 /*
221 * PL110 cannot choose between 5551 and 565 modes in its
222 * control register. It is possible to use 565 with
223 * custom external wiring.
224 */
225 if (amba_part(fb->dev) == 0x110 ||
226 var->green.length == 5)
227 val |= CNTL_LCDBPP16;
228 else if (var->green.length == 6)
229 val |= CNTL_LCDBPP16_565;
230 else
231 val |= CNTL_LCDBPP16_444;
232 break;
233 case 32:
234 val |= CNTL_LCDBPP24;
235 break;
236 }
237
238 regs->cntl = val;
239 regs->pixclock = var->pixclock;
240 }
241
clcdfb_check(struct clcd_fb * fb,struct fb_var_screeninfo * var)242 static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
243 {
244 var->xres_virtual = var->xres = (var->xres + 15) & ~15;
245 var->yres_virtual = var->yres = (var->yres + 1) & ~1;
246
247 #define CHECK(e,l,h) (var->e < l || var->e > h)
248 if (CHECK(right_margin, (5+1), 256) || /* back porch */
249 CHECK(left_margin, (5+1), 256) || /* front porch */
250 CHECK(hsync_len, (5+1), 256) ||
251 var->xres > 4096 ||
252 var->lower_margin > 255 || /* back porch */
253 var->upper_margin > 255 || /* front porch */
254 var->vsync_len > 32 ||
255 var->yres > 1024)
256 return -EINVAL;
257 #undef CHECK
258
259 /* single panel mode: PCD = max(PCD, 1) */
260 /* dual panel mode: PCD = max(PCD, 5) */
261
262 /*
263 * You can't change the grayscale setting, and
264 * we can only do non-interlaced video.
265 */
266 if (var->grayscale != fb->fb.var.grayscale ||
267 (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
268 return -EINVAL;
269
270 #define CHECK(e) (var->e != fb->fb.var.e)
271 if (fb->panel->fixedtimings &&
272 (CHECK(xres) ||
273 CHECK(yres) ||
274 CHECK(bits_per_pixel) ||
275 CHECK(pixclock) ||
276 CHECK(left_margin) ||
277 CHECK(right_margin) ||
278 CHECK(upper_margin) ||
279 CHECK(lower_margin) ||
280 CHECK(hsync_len) ||
281 CHECK(vsync_len) ||
282 CHECK(sync)))
283 return -EINVAL;
284 #undef CHECK
285
286 var->nonstd = 0;
287 var->accel_flags = 0;
288
289 return 0;
290 }
291