1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * ispccp2.c
4  *
5  * TI OMAP3 ISP - CCP2 module
6  *
7  * Copyright (C) 2010 Nokia Corporation
8  * Copyright (C) 2010 Texas Instruments, Inc.
9  *
10  * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
11  *	     Sakari Ailus <sakari.ailus@iki.fi>
12  */
13 
14 #include <linux/delay.h>
15 #include <linux/device.h>
16 #include <linux/mm.h>
17 #include <linux/module.h>
18 #include <linux/mutex.h>
19 #include <linux/uaccess.h>
20 #include <linux/regulator/consumer.h>
21 
22 #include "isp.h"
23 #include "ispreg.h"
24 #include "ispccp2.h"
25 
26 /* Number of LCX channels */
27 #define CCP2_LCx_CHANS_NUM			3
28 /* Max/Min size for CCP2 video port */
29 #define ISPCCP2_DAT_START_MIN			0
30 #define ISPCCP2_DAT_START_MAX			4095
31 #define ISPCCP2_DAT_SIZE_MIN			0
32 #define ISPCCP2_DAT_SIZE_MAX			4095
33 #define ISPCCP2_VPCLK_FRACDIV			65536
34 #define ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP	0x12
35 #define ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP	0x16
36 /* Max/Min size for CCP2 memory channel */
37 #define ISPCCP2_LCM_HSIZE_COUNT_MIN		16
38 #define ISPCCP2_LCM_HSIZE_COUNT_MAX		8191
39 #define ISPCCP2_LCM_HSIZE_SKIP_MIN		0
40 #define ISPCCP2_LCM_HSIZE_SKIP_MAX		8191
41 #define ISPCCP2_LCM_VSIZE_MIN			1
42 #define ISPCCP2_LCM_VSIZE_MAX			8191
43 #define ISPCCP2_LCM_HWORDS_MIN			1
44 #define ISPCCP2_LCM_HWORDS_MAX			4095
45 #define ISPCCP2_LCM_CTRL_BURST_SIZE_32X		5
46 #define ISPCCP2_LCM_CTRL_READ_THROTTLE_FULL	0
47 #define ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10	2
48 #define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8	2
49 #define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10	3
50 #define ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10	3
51 #define ISPCCP2_LCM_CTRL_DST_PORT_VP		0
52 #define ISPCCP2_LCM_CTRL_DST_PORT_MEM		1
53 
54 /* Set only the required bits */
55 #define BIT_SET(var, shift, mask, val)			\
56 	do {						\
57 		var = ((var) & ~((mask) << (shift)))	\
58 			| ((val) << (shift));		\
59 	} while (0)
60 
61 /*
62  * ccp2_print_status - Print current CCP2 module register values.
63  */
64 #define CCP2_PRINT_REGISTER(isp, name)\
65 	dev_dbg(isp->dev, "###CCP2 " #name "=0x%08x\n", \
66 		isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_##name))
67 
ccp2_print_status(struct isp_ccp2_device * ccp2)68 static void ccp2_print_status(struct isp_ccp2_device *ccp2)
69 {
70 	struct isp_device *isp = to_isp_device(ccp2);
71 
72 	dev_dbg(isp->dev, "-------------CCP2 Register dump-------------\n");
73 
74 	CCP2_PRINT_REGISTER(isp, SYSCONFIG);
75 	CCP2_PRINT_REGISTER(isp, SYSSTATUS);
76 	CCP2_PRINT_REGISTER(isp, LC01_IRQENABLE);
77 	CCP2_PRINT_REGISTER(isp, LC01_IRQSTATUS);
78 	CCP2_PRINT_REGISTER(isp, LC23_IRQENABLE);
79 	CCP2_PRINT_REGISTER(isp, LC23_IRQSTATUS);
80 	CCP2_PRINT_REGISTER(isp, LCM_IRQENABLE);
81 	CCP2_PRINT_REGISTER(isp, LCM_IRQSTATUS);
82 	CCP2_PRINT_REGISTER(isp, CTRL);
83 	CCP2_PRINT_REGISTER(isp, LCx_CTRL(0));
84 	CCP2_PRINT_REGISTER(isp, LCx_CODE(0));
85 	CCP2_PRINT_REGISTER(isp, LCx_STAT_START(0));
86 	CCP2_PRINT_REGISTER(isp, LCx_STAT_SIZE(0));
87 	CCP2_PRINT_REGISTER(isp, LCx_SOF_ADDR(0));
88 	CCP2_PRINT_REGISTER(isp, LCx_EOF_ADDR(0));
89 	CCP2_PRINT_REGISTER(isp, LCx_DAT_START(0));
90 	CCP2_PRINT_REGISTER(isp, LCx_DAT_SIZE(0));
91 	CCP2_PRINT_REGISTER(isp, LCx_DAT_PING_ADDR(0));
92 	CCP2_PRINT_REGISTER(isp, LCx_DAT_PONG_ADDR(0));
93 	CCP2_PRINT_REGISTER(isp, LCx_DAT_OFST(0));
94 	CCP2_PRINT_REGISTER(isp, LCM_CTRL);
95 	CCP2_PRINT_REGISTER(isp, LCM_VSIZE);
96 	CCP2_PRINT_REGISTER(isp, LCM_HSIZE);
97 	CCP2_PRINT_REGISTER(isp, LCM_PREFETCH);
98 	CCP2_PRINT_REGISTER(isp, LCM_SRC_ADDR);
99 	CCP2_PRINT_REGISTER(isp, LCM_SRC_OFST);
100 	CCP2_PRINT_REGISTER(isp, LCM_DST_ADDR);
101 	CCP2_PRINT_REGISTER(isp, LCM_DST_OFST);
102 
103 	dev_dbg(isp->dev, "--------------------------------------------\n");
104 }
105 
106 /*
107  * ccp2_reset - Reset the CCP2
108  * @ccp2: pointer to ISP CCP2 device
109  */
ccp2_reset(struct isp_ccp2_device * ccp2)110 static void ccp2_reset(struct isp_ccp2_device *ccp2)
111 {
112 	struct isp_device *isp = to_isp_device(ccp2);
113 	int i = 0;
114 
115 	/* Reset the CSI1/CCP2B and wait for reset to complete */
116 	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG,
117 		    ISPCCP2_SYSCONFIG_SOFT_RESET);
118 	while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSSTATUS) &
119 		 ISPCCP2_SYSSTATUS_RESET_DONE)) {
120 		udelay(10);
121 		if (i++ > 10) {  /* try read 10 times */
122 			dev_warn(isp->dev,
123 				"omap3_isp: timeout waiting for ccp2 reset\n");
124 			break;
125 		}
126 	}
127 }
128 
129 /*
130  * ccp2_pwr_cfg - Configure the power mode settings
131  * @ccp2: pointer to ISP CCP2 device
132  */
ccp2_pwr_cfg(struct isp_ccp2_device * ccp2)133 static void ccp2_pwr_cfg(struct isp_ccp2_device *ccp2)
134 {
135 	struct isp_device *isp = to_isp_device(ccp2);
136 
137 	isp_reg_writel(isp, ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART |
138 			((isp->revision == ISP_REVISION_15_0 && isp->autoidle) ?
139 			  ISPCCP2_SYSCONFIG_AUTO_IDLE : 0),
140 		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG);
141 }
142 
143 /*
144  * ccp2_if_enable - Enable CCP2 interface.
145  * @ccp2: pointer to ISP CCP2 device
146  * @enable: enable/disable flag
147  */
ccp2_if_enable(struct isp_ccp2_device * ccp2,u8 enable)148 static int ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
149 {
150 	struct isp_device *isp = to_isp_device(ccp2);
151 	int ret;
152 	int i;
153 
154 	if (enable && ccp2->vdds_csib) {
155 		ret = regulator_enable(ccp2->vdds_csib);
156 		if (ret < 0)
157 			return ret;
158 	}
159 
160 	/* Enable/Disable all the LCx channels */
161 	for (i = 0; i < CCP2_LCx_CHANS_NUM; i++)
162 		isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i),
163 				ISPCCP2_LCx_CTRL_CHAN_EN,
164 				enable ? ISPCCP2_LCx_CTRL_CHAN_EN : 0);
165 
166 	/* Enable/Disable ccp2 interface in ccp2 mode */
167 	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
168 			ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN,
169 			enable ? (ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN) : 0);
170 
171 	if (!enable && ccp2->vdds_csib)
172 		regulator_disable(ccp2->vdds_csib);
173 
174 	return 0;
175 }
176 
177 /*
178  * ccp2_mem_enable - Enable CCP2 memory interface.
179  * @ccp2: pointer to ISP CCP2 device
180  * @enable: enable/disable flag
181  */
ccp2_mem_enable(struct isp_ccp2_device * ccp2,u8 enable)182 static void ccp2_mem_enable(struct isp_ccp2_device *ccp2, u8 enable)
183 {
184 	struct isp_device *isp = to_isp_device(ccp2);
185 
186 	if (enable)
187 		ccp2_if_enable(ccp2, 0);
188 
189 	/* Enable/Disable ccp2 interface in ccp2 mode */
190 	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
191 			ISPCCP2_CTRL_MODE, enable ? ISPCCP2_CTRL_MODE : 0);
192 
193 	isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL,
194 			ISPCCP2_LCM_CTRL_CHAN_EN,
195 			enable ? ISPCCP2_LCM_CTRL_CHAN_EN : 0);
196 }
197 
198 /*
199  * ccp2_phyif_config - Initialize CCP2 phy interface config
200  * @ccp2: Pointer to ISP CCP2 device
201  * @buscfg: CCP2 platform data
202  *
203  * Configure the CCP2 physical interface module from platform data.
204  *
205  * Returns -EIO if strobe is chosen in CSI1 mode, or 0 on success.
206  */
ccp2_phyif_config(struct isp_ccp2_device * ccp2,const struct isp_ccp2_cfg * buscfg)207 static int ccp2_phyif_config(struct isp_ccp2_device *ccp2,
208 			     const struct isp_ccp2_cfg *buscfg)
209 {
210 	struct isp_device *isp = to_isp_device(ccp2);
211 	u32 val;
212 
213 	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL) |
214 			    ISPCCP2_CTRL_MODE;
215 	/* Data/strobe physical layer */
216 	BIT_SET(val, ISPCCP2_CTRL_PHY_SEL_SHIFT, ISPCCP2_CTRL_PHY_SEL_MASK,
217 		buscfg->phy_layer);
218 	BIT_SET(val, ISPCCP2_CTRL_IO_OUT_SEL_SHIFT,
219 		ISPCCP2_CTRL_IO_OUT_SEL_MASK, buscfg->ccp2_mode);
220 	BIT_SET(val, ISPCCP2_CTRL_INV_SHIFT, ISPCCP2_CTRL_INV_MASK,
221 		buscfg->strobe_clk_pol);
222 	BIT_SET(val, ISPCCP2_CTRL_VP_CLK_POL_SHIFT,
223 		ISPCCP2_CTRL_VP_CLK_POL_MASK, buscfg->vp_clk_pol);
224 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
225 
226 	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
227 	if (!(val & ISPCCP2_CTRL_MODE)) {
228 		if (buscfg->ccp2_mode == ISP_CCP2_MODE_CCP2)
229 			dev_warn(isp->dev, "OMAP3 CCP2 bus not available\n");
230 		if (buscfg->phy_layer == ISP_CCP2_PHY_DATA_STROBE)
231 			/* Strobe mode requires CCP2 */
232 			return -EIO;
233 	}
234 
235 	return 0;
236 }
237 
238 /*
239  * ccp2_vp_config - Initialize CCP2 video port interface.
240  * @ccp2: Pointer to ISP CCP2 device
241  * @vpclk_div: Video port divisor
242  *
243  * Configure the CCP2 video port with the given clock divisor. The valid divisor
244  * values depend on the ISP revision:
245  *
246  * - revision 1.0 and 2.0	1 to 4
247  * - revision 15.0		1 to 65536
248  *
249  * The exact divisor value used might differ from the requested value, as ISP
250  * revision 15.0 represent the divisor by 65536 divided by an integer.
251  */
ccp2_vp_config(struct isp_ccp2_device * ccp2,unsigned int vpclk_div)252 static void ccp2_vp_config(struct isp_ccp2_device *ccp2,
253 			   unsigned int vpclk_div)
254 {
255 	struct isp_device *isp = to_isp_device(ccp2);
256 	u32 val;
257 
258 	/* ISPCCP2_CTRL Video port */
259 	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
260 	val |= ISPCCP2_CTRL_VP_ONLY_EN;	/* Disable the memory write port */
261 
262 	if (isp->revision == ISP_REVISION_15_0) {
263 		vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 65536);
264 		vpclk_div = min(ISPCCP2_VPCLK_FRACDIV / vpclk_div, 65535U);
265 		BIT_SET(val, ISPCCP2_CTRL_VPCLK_DIV_SHIFT,
266 			ISPCCP2_CTRL_VPCLK_DIV_MASK, vpclk_div);
267 	} else {
268 		vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 4);
269 		BIT_SET(val, ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT,
270 			ISPCCP2_CTRL_VP_OUT_CTRL_MASK, vpclk_div - 1);
271 	}
272 
273 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
274 }
275 
276 /*
277  * ccp2_lcx_config - Initialize CCP2 logical channel interface.
278  * @ccp2: Pointer to ISP CCP2 device
279  * @config: Pointer to ISP LCx config structure.
280  *
281  * This will analyze the parameters passed by the interface config
282  * and configure CSI1/CCP2 logical channel
283  *
284  */
ccp2_lcx_config(struct isp_ccp2_device * ccp2,struct isp_interface_lcx_config * config)285 static void ccp2_lcx_config(struct isp_ccp2_device *ccp2,
286 			    struct isp_interface_lcx_config *config)
287 {
288 	struct isp_device *isp = to_isp_device(ccp2);
289 	u32 val, format;
290 
291 	switch (config->format) {
292 	case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8:
293 		format = ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP;
294 		break;
295 	case MEDIA_BUS_FMT_SGRBG10_1X10:
296 	default:
297 		format = ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP;	/* RAW10+VP */
298 		break;
299 	}
300 	/* ISPCCP2_LCx_CTRL logical channel #0 */
301 	val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0))
302 			    | (ISPCCP2_LCx_CTRL_REGION_EN); /* Region */
303 
304 	if (isp->revision == ISP_REVISION_15_0) {
305 		/* CRC */
306 		BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT_15_0,
307 			ISPCCP2_LCx_CTRL_CRC_MASK,
308 			config->crc);
309 		/* Format = RAW10+VP or RAW8+DPCM10+VP*/
310 		BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT_15_0,
311 			ISPCCP2_LCx_CTRL_FORMAT_MASK_15_0, format);
312 	} else {
313 		BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT,
314 			ISPCCP2_LCx_CTRL_CRC_MASK,
315 			config->crc);
316 
317 		BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT,
318 			ISPCCP2_LCx_CTRL_FORMAT_MASK, format);
319 	}
320 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0));
321 
322 	/* ISPCCP2_DAT_START for logical channel #0 */
323 	isp_reg_writel(isp, config->data_start << ISPCCP2_LCx_DAT_SHIFT,
324 		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_START(0));
325 
326 	/* ISPCCP2_DAT_SIZE for logical channel #0 */
327 	isp_reg_writel(isp, config->data_size << ISPCCP2_LCx_DAT_SHIFT,
328 		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_SIZE(0));
329 
330 	/* Enable error IRQs for logical channel #0 */
331 	val = ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
332 	      ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
333 	      ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
334 	      ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
335 	      ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
336 	      ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
337 
338 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQSTATUS);
339 	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val);
340 }
341 
342 /*
343  * ccp2_if_configure - Configure ccp2 with data from sensor
344  * @ccp2: Pointer to ISP CCP2 device
345  *
346  * Return 0 on success or a negative error code
347  */
ccp2_if_configure(struct isp_ccp2_device * ccp2)348 static int ccp2_if_configure(struct isp_ccp2_device *ccp2)
349 {
350 	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
351 	const struct isp_bus_cfg *buscfg;
352 	struct v4l2_mbus_framefmt *format;
353 	struct media_pad *pad;
354 	struct v4l2_subdev *sensor;
355 	u32 lines = 0;
356 	int ret;
357 
358 	ccp2_pwr_cfg(ccp2);
359 
360 	pad = media_pad_remote_pad_first(&ccp2->pads[CCP2_PAD_SINK]);
361 	sensor = media_entity_to_v4l2_subdev(pad->entity);
362 	buscfg = v4l2_subdev_to_bus_cfg(pipe->external);
363 	if (WARN_ON(!buscfg))
364 		return -EPIPE;
365 
366 	ret = ccp2_phyif_config(ccp2, &buscfg->bus.ccp2);
367 	if (ret < 0)
368 		return ret;
369 
370 	ccp2_vp_config(ccp2, buscfg->bus.ccp2.vpclk_div + 1);
371 
372 	v4l2_subdev_call(sensor, sensor, g_skip_top_lines, &lines);
373 
374 	format = &ccp2->formats[CCP2_PAD_SINK];
375 
376 	ccp2->if_cfg.data_start = lines;
377 	ccp2->if_cfg.crc = buscfg->bus.ccp2.crc;
378 	ccp2->if_cfg.format = format->code;
379 	ccp2->if_cfg.data_size = format->height;
380 
381 	ccp2_lcx_config(ccp2, &ccp2->if_cfg);
382 
383 	return 0;
384 }
385 
ccp2_adjust_bandwidth(struct isp_ccp2_device * ccp2)386 static int ccp2_adjust_bandwidth(struct isp_ccp2_device *ccp2)
387 {
388 	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
389 	struct isp_device *isp = to_isp_device(ccp2);
390 	const struct v4l2_mbus_framefmt *ofmt = &ccp2->formats[CCP2_PAD_SOURCE];
391 	unsigned long l3_ick = pipe->l3_ick;
392 	struct v4l2_fract *timeperframe;
393 	unsigned int vpclk_div = 2;
394 	unsigned int value;
395 	u64 bound;
396 	u64 area;
397 
398 	/* Compute the minimum clock divisor, based on the pipeline maximum
399 	 * data rate. This is an absolute lower bound if we don't want SBL
400 	 * overflows, so round the value up.
401 	 */
402 	vpclk_div = max_t(unsigned int, DIV_ROUND_UP(l3_ick, pipe->max_rate),
403 			  vpclk_div);
404 
405 	/* Compute the maximum clock divisor, based on the requested frame rate.
406 	 * This is a soft lower bound to achieve a frame rate equal or higher
407 	 * than the requested value, so round the value down.
408 	 */
409 	timeperframe = &pipe->max_timeperframe;
410 
411 	if (timeperframe->numerator) {
412 		area = ofmt->width * ofmt->height;
413 		bound = div_u64(area * timeperframe->denominator,
414 				timeperframe->numerator);
415 		value = min_t(u64, bound, l3_ick);
416 		vpclk_div = max_t(unsigned int, l3_ick / value, vpclk_div);
417 	}
418 
419 	dev_dbg(isp->dev, "%s: minimum clock divisor = %u\n", __func__,
420 		vpclk_div);
421 
422 	return vpclk_div;
423 }
424 
425 /*
426  * ccp2_mem_configure - Initialize CCP2 memory input/output interface
427  * @ccp2: Pointer to ISP CCP2 device
428  * @config: Pointer to ISP mem interface config structure
429  *
430  * This will analyze the parameters passed by the interface config
431  * structure, and configure the respective registers for proper
432  * CSI1/CCP2 memory input.
433  */
ccp2_mem_configure(struct isp_ccp2_device * ccp2,struct isp_interface_mem_config * config)434 static void ccp2_mem_configure(struct isp_ccp2_device *ccp2,
435 			       struct isp_interface_mem_config *config)
436 {
437 	struct isp_device *isp = to_isp_device(ccp2);
438 	u32 sink_pixcode = ccp2->formats[CCP2_PAD_SINK].code;
439 	u32 source_pixcode = ccp2->formats[CCP2_PAD_SOURCE].code;
440 	unsigned int dpcm_decompress = 0;
441 	u32 val, hwords;
442 
443 	if (sink_pixcode != source_pixcode &&
444 	    sink_pixcode == MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8)
445 		dpcm_decompress = 1;
446 
447 	ccp2_pwr_cfg(ccp2);
448 
449 	/* Hsize, Skip */
450 	isp_reg_writel(isp, ISPCCP2_LCM_HSIZE_SKIP_MIN |
451 		       (config->hsize_count << ISPCCP2_LCM_HSIZE_SHIFT),
452 		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_HSIZE);
453 
454 	/* Vsize, no. of lines */
455 	isp_reg_writel(isp, config->vsize_count << ISPCCP2_LCM_VSIZE_SHIFT,
456 		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_VSIZE);
457 
458 	if (ccp2->video_in.bpl_padding == 0)
459 		config->src_ofst = 0;
460 	else
461 		config->src_ofst = ccp2->video_in.bpl_value;
462 
463 	isp_reg_writel(isp, config->src_ofst, OMAP3_ISP_IOMEM_CCP2,
464 		       ISPCCP2_LCM_SRC_OFST);
465 
466 	/* Source and Destination formats */
467 	val = ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 <<
468 	      ISPCCP2_LCM_CTRL_DST_FORMAT_SHIFT;
469 
470 	if (dpcm_decompress) {
471 		/* source format is RAW8 */
472 		val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 <<
473 		       ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
474 
475 		/* RAW8 + DPCM10 - simple predictor */
476 		val |= ISPCCP2_LCM_CTRL_SRC_DPCM_PRED;
477 
478 		/* enable source DPCM decompression */
479 		val |= ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 <<
480 		       ISPCCP2_LCM_CTRL_SRC_DECOMPR_SHIFT;
481 	} else {
482 		/* source format is RAW10 */
483 		val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 <<
484 		       ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
485 	}
486 
487 	/* Burst size to 32x64 */
488 	val |= ISPCCP2_LCM_CTRL_BURST_SIZE_32X <<
489 	       ISPCCP2_LCM_CTRL_BURST_SIZE_SHIFT;
490 
491 	isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL);
492 
493 	/* Prefetch setup */
494 	if (dpcm_decompress)
495 		hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
496 			  config->hsize_count) >> 3;
497 	else
498 		hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
499 			  config->hsize_count) >> 2;
500 
501 	isp_reg_writel(isp, hwords << ISPCCP2_LCM_PREFETCH_SHIFT,
502 		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_PREFETCH);
503 
504 	/* Video port */
505 	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
506 		    ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE);
507 	ccp2_vp_config(ccp2, ccp2_adjust_bandwidth(ccp2));
508 
509 	/* Clear LCM interrupts */
510 	isp_reg_writel(isp, ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ |
511 		       ISPCCP2_LCM_IRQSTATUS_EOF_IRQ,
512 		       OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQSTATUS);
513 
514 	/* Enable LCM interrupts */
515 	isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQENABLE,
516 		    ISPCCP2_LCM_IRQSTATUS_EOF_IRQ |
517 		    ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ);
518 }
519 
520 /*
521  * ccp2_set_inaddr - Sets memory address of input frame.
522  * @ccp2: Pointer to ISP CCP2 device
523  * @addr: 32bit memory address aligned on 32byte boundary.
524  *
525  * Configures the memory address from which the input frame is to be read.
526  */
ccp2_set_inaddr(struct isp_ccp2_device * ccp2,u32 addr)527 static void ccp2_set_inaddr(struct isp_ccp2_device *ccp2, u32 addr)
528 {
529 	struct isp_device *isp = to_isp_device(ccp2);
530 
531 	isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_SRC_ADDR);
532 }
533 
534 /* -----------------------------------------------------------------------------
535  * Interrupt handling
536  */
537 
ccp2_isr_buffer(struct isp_ccp2_device * ccp2)538 static void ccp2_isr_buffer(struct isp_ccp2_device *ccp2)
539 {
540 	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
541 	struct isp_buffer *buffer;
542 
543 	buffer = omap3isp_video_buffer_next(&ccp2->video_in);
544 	if (buffer != NULL)
545 		ccp2_set_inaddr(ccp2, buffer->dma);
546 
547 	pipe->state |= ISP_PIPELINE_IDLE_INPUT;
548 
549 	if (ccp2->state == ISP_PIPELINE_STREAM_SINGLESHOT) {
550 		if (isp_pipeline_ready(pipe))
551 			omap3isp_pipeline_set_stream(pipe,
552 						ISP_PIPELINE_STREAM_SINGLESHOT);
553 	}
554 }
555 
556 /*
557  * omap3isp_ccp2_isr - Handle ISP CCP2 interrupts
558  * @ccp2: Pointer to ISP CCP2 device
559  *
560  * This will handle the CCP2 interrupts
561  */
omap3isp_ccp2_isr(struct isp_ccp2_device * ccp2)562 void omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2)
563 {
564 	struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
565 	struct isp_device *isp = to_isp_device(ccp2);
566 	static const u32 ISPCCP2_LC01_ERROR =
567 		ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
568 		ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
569 		ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
570 		ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
571 		ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
572 		ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
573 	u32 lcx_irqstatus, lcm_irqstatus;
574 
575 	/* First clear the interrupts */
576 	lcx_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
577 				      ISPCCP2_LC01_IRQSTATUS);
578 	isp_reg_writel(isp, lcx_irqstatus, OMAP3_ISP_IOMEM_CCP2,
579 		       ISPCCP2_LC01_IRQSTATUS);
580 
581 	lcm_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
582 				      ISPCCP2_LCM_IRQSTATUS);
583 	isp_reg_writel(isp, lcm_irqstatus, OMAP3_ISP_IOMEM_CCP2,
584 		       ISPCCP2_LCM_IRQSTATUS);
585 	/* Errors */
586 	if (lcx_irqstatus & ISPCCP2_LC01_ERROR) {
587 		pipe->error = true;
588 		dev_dbg(isp->dev, "CCP2 err:%x\n", lcx_irqstatus);
589 		return;
590 	}
591 
592 	if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ) {
593 		pipe->error = true;
594 		dev_dbg(isp->dev, "CCP2 OCP err:%x\n", lcm_irqstatus);
595 	}
596 
597 	if (omap3isp_module_sync_is_stopping(&ccp2->wait, &ccp2->stopping))
598 		return;
599 
600 	/* Handle queued buffers on frame end interrupts */
601 	if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_EOF_IRQ)
602 		ccp2_isr_buffer(ccp2);
603 }
604 
605 /* -----------------------------------------------------------------------------
606  * V4L2 subdev operations
607  */
608 
609 static const unsigned int ccp2_fmts[] = {
610 	MEDIA_BUS_FMT_SGRBG10_1X10,
611 	MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
612 };
613 
614 /*
615  * __ccp2_get_format - helper function for getting ccp2 format
616  * @ccp2  : Pointer to ISP CCP2 device
617  * @cfg: V4L2 subdev pad configuration
618  * @pad   : pad number
619  * @which : wanted subdev format
620  * return format structure or NULL on error
621  */
622 static struct v4l2_mbus_framefmt *
__ccp2_get_format(struct isp_ccp2_device * ccp2,struct v4l2_subdev_state * sd_state,unsigned int pad,enum v4l2_subdev_format_whence which)623 __ccp2_get_format(struct isp_ccp2_device *ccp2,
624 		  struct v4l2_subdev_state *sd_state,
625 		  unsigned int pad, enum v4l2_subdev_format_whence which)
626 {
627 	if (which == V4L2_SUBDEV_FORMAT_TRY)
628 		return v4l2_subdev_get_try_format(&ccp2->subdev, sd_state,
629 						  pad);
630 	else
631 		return &ccp2->formats[pad];
632 }
633 
634 /*
635  * ccp2_try_format - Handle try format by pad subdev method
636  * @ccp2  : Pointer to ISP CCP2 device
637  * @cfg: V4L2 subdev pad configuration
638  * @pad   : pad num
639  * @fmt   : pointer to v4l2 mbus format structure
640  * @which : wanted subdev format
641  */
ccp2_try_format(struct isp_ccp2_device * ccp2,struct v4l2_subdev_state * sd_state,unsigned int pad,struct v4l2_mbus_framefmt * fmt,enum v4l2_subdev_format_whence which)642 static void ccp2_try_format(struct isp_ccp2_device *ccp2,
643 			       struct v4l2_subdev_state *sd_state,
644 			       unsigned int pad,
645 			       struct v4l2_mbus_framefmt *fmt,
646 			       enum v4l2_subdev_format_whence which)
647 {
648 	struct v4l2_mbus_framefmt *format;
649 
650 	switch (pad) {
651 	case CCP2_PAD_SINK:
652 		if (fmt->code != MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8)
653 			fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
654 
655 		if (ccp2->input == CCP2_INPUT_SENSOR) {
656 			fmt->width = clamp_t(u32, fmt->width,
657 					     ISPCCP2_DAT_START_MIN,
658 					     ISPCCP2_DAT_START_MAX);
659 			fmt->height = clamp_t(u32, fmt->height,
660 					      ISPCCP2_DAT_SIZE_MIN,
661 					      ISPCCP2_DAT_SIZE_MAX);
662 		} else if (ccp2->input == CCP2_INPUT_MEMORY) {
663 			fmt->width = clamp_t(u32, fmt->width,
664 					     ISPCCP2_LCM_HSIZE_COUNT_MIN,
665 					     ISPCCP2_LCM_HSIZE_COUNT_MAX);
666 			fmt->height = clamp_t(u32, fmt->height,
667 					      ISPCCP2_LCM_VSIZE_MIN,
668 					      ISPCCP2_LCM_VSIZE_MAX);
669 		}
670 		break;
671 
672 	case CCP2_PAD_SOURCE:
673 		/* Source format - copy sink format and change pixel code
674 		 * to SGRBG10_1X10 as we don't support CCP2 write to memory.
675 		 * When CCP2 write to memory feature will be added this
676 		 * should be changed properly.
677 		 */
678 		format = __ccp2_get_format(ccp2, sd_state, CCP2_PAD_SINK,
679 					   which);
680 		memcpy(fmt, format, sizeof(*fmt));
681 		fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
682 		break;
683 	}
684 
685 	fmt->field = V4L2_FIELD_NONE;
686 	fmt->colorspace = V4L2_COLORSPACE_SRGB;
687 }
688 
689 /*
690  * ccp2_enum_mbus_code - Handle pixel format enumeration
691  * @sd     : pointer to v4l2 subdev structure
692  * @cfg: V4L2 subdev pad configuration
693  * @code   : pointer to v4l2_subdev_mbus_code_enum structure
694  * return -EINVAL or zero on success
695  */
ccp2_enum_mbus_code(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_mbus_code_enum * code)696 static int ccp2_enum_mbus_code(struct v4l2_subdev *sd,
697 				  struct v4l2_subdev_state *sd_state,
698 				  struct v4l2_subdev_mbus_code_enum *code)
699 {
700 	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
701 	struct v4l2_mbus_framefmt *format;
702 
703 	if (code->pad == CCP2_PAD_SINK) {
704 		if (code->index >= ARRAY_SIZE(ccp2_fmts))
705 			return -EINVAL;
706 
707 		code->code = ccp2_fmts[code->index];
708 	} else {
709 		if (code->index != 0)
710 			return -EINVAL;
711 
712 		format = __ccp2_get_format(ccp2, sd_state, CCP2_PAD_SINK,
713 					   code->which);
714 		code->code = format->code;
715 	}
716 
717 	return 0;
718 }
719 
ccp2_enum_frame_size(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_frame_size_enum * fse)720 static int ccp2_enum_frame_size(struct v4l2_subdev *sd,
721 				   struct v4l2_subdev_state *sd_state,
722 				   struct v4l2_subdev_frame_size_enum *fse)
723 {
724 	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
725 	struct v4l2_mbus_framefmt format;
726 
727 	if (fse->index != 0)
728 		return -EINVAL;
729 
730 	format.code = fse->code;
731 	format.width = 1;
732 	format.height = 1;
733 	ccp2_try_format(ccp2, sd_state, fse->pad, &format, fse->which);
734 	fse->min_width = format.width;
735 	fse->min_height = format.height;
736 
737 	if (format.code != fse->code)
738 		return -EINVAL;
739 
740 	format.code = fse->code;
741 	format.width = -1;
742 	format.height = -1;
743 	ccp2_try_format(ccp2, sd_state, fse->pad, &format, fse->which);
744 	fse->max_width = format.width;
745 	fse->max_height = format.height;
746 
747 	return 0;
748 }
749 
750 /*
751  * ccp2_get_format - Handle get format by pads subdev method
752  * @sd    : pointer to v4l2 subdev structure
753  * @cfg: V4L2 subdev pad configuration
754  * @fmt   : pointer to v4l2 subdev format structure
755  * return -EINVAL or zero on success
756  */
ccp2_get_format(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)757 static int ccp2_get_format(struct v4l2_subdev *sd,
758 			   struct v4l2_subdev_state *sd_state,
759 			   struct v4l2_subdev_format *fmt)
760 {
761 	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
762 	struct v4l2_mbus_framefmt *format;
763 
764 	format = __ccp2_get_format(ccp2, sd_state, fmt->pad, fmt->which);
765 	if (format == NULL)
766 		return -EINVAL;
767 
768 	fmt->format = *format;
769 	return 0;
770 }
771 
772 /*
773  * ccp2_set_format - Handle set format by pads subdev method
774  * @sd    : pointer to v4l2 subdev structure
775  * @cfg: V4L2 subdev pad configuration
776  * @fmt   : pointer to v4l2 subdev format structure
777  * returns zero
778  */
ccp2_set_format(struct v4l2_subdev * sd,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)779 static int ccp2_set_format(struct v4l2_subdev *sd,
780 			   struct v4l2_subdev_state *sd_state,
781 			   struct v4l2_subdev_format *fmt)
782 {
783 	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
784 	struct v4l2_mbus_framefmt *format;
785 
786 	format = __ccp2_get_format(ccp2, sd_state, fmt->pad, fmt->which);
787 	if (format == NULL)
788 		return -EINVAL;
789 
790 	ccp2_try_format(ccp2, sd_state, fmt->pad, &fmt->format, fmt->which);
791 	*format = fmt->format;
792 
793 	/* Propagate the format from sink to source */
794 	if (fmt->pad == CCP2_PAD_SINK) {
795 		format = __ccp2_get_format(ccp2, sd_state, CCP2_PAD_SOURCE,
796 					   fmt->which);
797 		*format = fmt->format;
798 		ccp2_try_format(ccp2, sd_state, CCP2_PAD_SOURCE, format,
799 				fmt->which);
800 	}
801 
802 	return 0;
803 }
804 
805 /*
806  * ccp2_init_formats - Initialize formats on all pads
807  * @sd: ISP CCP2 V4L2 subdevice
808  * @fh: V4L2 subdev file handle
809  *
810  * Initialize all pad formats with default values. If fh is not NULL, try
811  * formats are initialized on the file handle. Otherwise active formats are
812  * initialized on the device.
813  */
ccp2_init_formats(struct v4l2_subdev * sd,struct v4l2_subdev_fh * fh)814 static int ccp2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
815 {
816 	struct v4l2_subdev_format format;
817 
818 	memset(&format, 0, sizeof(format));
819 	format.pad = CCP2_PAD_SINK;
820 	format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
821 	format.format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
822 	format.format.width = 4096;
823 	format.format.height = 4096;
824 	ccp2_set_format(sd, fh ? fh->state : NULL, &format);
825 
826 	return 0;
827 }
828 
829 /*
830  * ccp2_s_stream - Enable/Disable streaming on ccp2 subdev
831  * @sd    : pointer to v4l2 subdev structure
832  * @enable: 1 == Enable, 0 == Disable
833  * return zero
834  */
ccp2_s_stream(struct v4l2_subdev * sd,int enable)835 static int ccp2_s_stream(struct v4l2_subdev *sd, int enable)
836 {
837 	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
838 	struct isp_device *isp = to_isp_device(ccp2);
839 	struct device *dev = to_device(ccp2);
840 	int ret;
841 
842 	if (ccp2->state == ISP_PIPELINE_STREAM_STOPPED) {
843 		if (enable == ISP_PIPELINE_STREAM_STOPPED)
844 			return 0;
845 		atomic_set(&ccp2->stopping, 0);
846 	}
847 
848 	switch (enable) {
849 	case ISP_PIPELINE_STREAM_CONTINUOUS:
850 		if (ccp2->phy) {
851 			ret = omap3isp_csiphy_acquire(ccp2->phy, &sd->entity);
852 			if (ret < 0)
853 				return ret;
854 		}
855 
856 		ccp2_if_configure(ccp2);
857 		ccp2_print_status(ccp2);
858 
859 		/* Enable CSI1/CCP2 interface */
860 		ret = ccp2_if_enable(ccp2, 1);
861 		if (ret < 0) {
862 			if (ccp2->phy)
863 				omap3isp_csiphy_release(ccp2->phy);
864 			return ret;
865 		}
866 		break;
867 
868 	case ISP_PIPELINE_STREAM_SINGLESHOT:
869 		if (ccp2->state != ISP_PIPELINE_STREAM_SINGLESHOT) {
870 			struct v4l2_mbus_framefmt *format;
871 
872 			format = &ccp2->formats[CCP2_PAD_SINK];
873 
874 			ccp2->mem_cfg.hsize_count = format->width;
875 			ccp2->mem_cfg.vsize_count = format->height;
876 			ccp2->mem_cfg.src_ofst = 0;
877 
878 			ccp2_mem_configure(ccp2, &ccp2->mem_cfg);
879 			omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI1_READ);
880 			ccp2_print_status(ccp2);
881 		}
882 		ccp2_mem_enable(ccp2, 1);
883 		break;
884 
885 	case ISP_PIPELINE_STREAM_STOPPED:
886 		if (omap3isp_module_sync_idle(&sd->entity, &ccp2->wait,
887 					      &ccp2->stopping))
888 			dev_dbg(dev, "%s: module stop timeout.\n", sd->name);
889 		if (ccp2->input == CCP2_INPUT_MEMORY) {
890 			ccp2_mem_enable(ccp2, 0);
891 			omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI1_READ);
892 		} else if (ccp2->input == CCP2_INPUT_SENSOR) {
893 			/* Disable CSI1/CCP2 interface */
894 			ccp2_if_enable(ccp2, 0);
895 			if (ccp2->phy)
896 				omap3isp_csiphy_release(ccp2->phy);
897 		}
898 		break;
899 	}
900 
901 	ccp2->state = enable;
902 	return 0;
903 }
904 
905 /* subdev video operations */
906 static const struct v4l2_subdev_video_ops ccp2_sd_video_ops = {
907 	.s_stream = ccp2_s_stream,
908 };
909 
910 /* subdev pad operations */
911 static const struct v4l2_subdev_pad_ops ccp2_sd_pad_ops = {
912 	.enum_mbus_code = ccp2_enum_mbus_code,
913 	.enum_frame_size = ccp2_enum_frame_size,
914 	.get_fmt = ccp2_get_format,
915 	.set_fmt = ccp2_set_format,
916 };
917 
918 /* subdev operations */
919 static const struct v4l2_subdev_ops ccp2_sd_ops = {
920 	.video = &ccp2_sd_video_ops,
921 	.pad = &ccp2_sd_pad_ops,
922 };
923 
924 /* subdev internal operations */
925 static const struct v4l2_subdev_internal_ops ccp2_sd_internal_ops = {
926 	.open = ccp2_init_formats,
927 };
928 
929 /* --------------------------------------------------------------------------
930  * ISP ccp2 video device node
931  */
932 
933 /*
934  * ccp2_video_queue - Queue video buffer.
935  * @video : Pointer to isp video structure
936  * @buffer: Pointer to isp_buffer structure
937  * return -EIO or zero on success
938  */
ccp2_video_queue(struct isp_video * video,struct isp_buffer * buffer)939 static int ccp2_video_queue(struct isp_video *video, struct isp_buffer *buffer)
940 {
941 	struct isp_ccp2_device *ccp2 = &video->isp->isp_ccp2;
942 
943 	ccp2_set_inaddr(ccp2, buffer->dma);
944 	return 0;
945 }
946 
947 static const struct isp_video_operations ccp2_video_ops = {
948 	.queue = ccp2_video_queue,
949 };
950 
951 /* -----------------------------------------------------------------------------
952  * Media entity operations
953  */
954 
955 /*
956  * ccp2_link_setup - Setup ccp2 connections.
957  * @entity : Pointer to media entity structure
958  * @local  : Pointer to local pad array
959  * @remote : Pointer to remote pad array
960  * @flags  : Link flags
961  * return -EINVAL on error or zero on success
962  */
ccp2_link_setup(struct media_entity * entity,const struct media_pad * local,const struct media_pad * remote,u32 flags)963 static int ccp2_link_setup(struct media_entity *entity,
964 			   const struct media_pad *local,
965 			   const struct media_pad *remote, u32 flags)
966 {
967 	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
968 	struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
969 	unsigned int index = local->index;
970 
971 	/* FIXME: this is actually a hack! */
972 	if (is_media_entity_v4l2_subdev(remote->entity))
973 		index |= 2 << 16;
974 
975 	switch (index) {
976 	case CCP2_PAD_SINK:
977 		/* read from memory */
978 		if (flags & MEDIA_LNK_FL_ENABLED) {
979 			if (ccp2->input == CCP2_INPUT_SENSOR)
980 				return -EBUSY;
981 			ccp2->input = CCP2_INPUT_MEMORY;
982 		} else {
983 			if (ccp2->input == CCP2_INPUT_MEMORY)
984 				ccp2->input = CCP2_INPUT_NONE;
985 		}
986 		break;
987 
988 	case CCP2_PAD_SINK | 2 << 16:
989 		/* read from sensor/phy */
990 		if (flags & MEDIA_LNK_FL_ENABLED) {
991 			if (ccp2->input == CCP2_INPUT_MEMORY)
992 				return -EBUSY;
993 			ccp2->input = CCP2_INPUT_SENSOR;
994 		} else {
995 			if (ccp2->input == CCP2_INPUT_SENSOR)
996 				ccp2->input = CCP2_INPUT_NONE;
997 		} break;
998 
999 	case CCP2_PAD_SOURCE | 2 << 16:
1000 		/* write to video port/ccdc */
1001 		if (flags & MEDIA_LNK_FL_ENABLED)
1002 			ccp2->output = CCP2_OUTPUT_CCDC;
1003 		else
1004 			ccp2->output = CCP2_OUTPUT_NONE;
1005 		break;
1006 
1007 	default:
1008 		return -EINVAL;
1009 	}
1010 
1011 	return 0;
1012 }
1013 
1014 /* media operations */
1015 static const struct media_entity_operations ccp2_media_ops = {
1016 	.link_setup = ccp2_link_setup,
1017 	.link_validate = v4l2_subdev_link_validate,
1018 };
1019 
1020 /*
1021  * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev
1022  * @ccp2: Pointer to ISP CCP2 device
1023  */
omap3isp_ccp2_unregister_entities(struct isp_ccp2_device * ccp2)1024 void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2)
1025 {
1026 	v4l2_device_unregister_subdev(&ccp2->subdev);
1027 	omap3isp_video_unregister(&ccp2->video_in);
1028 }
1029 
1030 /*
1031  * omap3isp_ccp2_register_entities - Register the subdev media entity
1032  * @ccp2: Pointer to ISP CCP2 device
1033  * @vdev: Pointer to v4l device
1034  * return negative error code or zero on success
1035  */
1036 
omap3isp_ccp2_register_entities(struct isp_ccp2_device * ccp2,struct v4l2_device * vdev)1037 int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
1038 				    struct v4l2_device *vdev)
1039 {
1040 	int ret;
1041 
1042 	/* Register the subdev and video nodes. */
1043 	ccp2->subdev.dev = vdev->mdev->dev;
1044 	ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
1045 	if (ret < 0)
1046 		goto error;
1047 
1048 	ret = omap3isp_video_register(&ccp2->video_in, vdev);
1049 	if (ret < 0)
1050 		goto error;
1051 
1052 	return 0;
1053 
1054 error:
1055 	omap3isp_ccp2_unregister_entities(ccp2);
1056 	return ret;
1057 }
1058 
1059 /* -----------------------------------------------------------------------------
1060  * ISP ccp2 initialisation and cleanup
1061  */
1062 
1063 /*
1064  * ccp2_init_entities - Initialize ccp2 subdev and media entity.
1065  * @ccp2: Pointer to ISP CCP2 device
1066  * return negative error code or zero on success
1067  */
ccp2_init_entities(struct isp_ccp2_device * ccp2)1068 static int ccp2_init_entities(struct isp_ccp2_device *ccp2)
1069 {
1070 	struct v4l2_subdev *sd = &ccp2->subdev;
1071 	struct media_pad *pads = ccp2->pads;
1072 	struct media_entity *me = &sd->entity;
1073 	int ret;
1074 
1075 	ccp2->input = CCP2_INPUT_NONE;
1076 	ccp2->output = CCP2_OUTPUT_NONE;
1077 
1078 	v4l2_subdev_init(sd, &ccp2_sd_ops);
1079 	sd->internal_ops = &ccp2_sd_internal_ops;
1080 	strscpy(sd->name, "OMAP3 ISP CCP2", sizeof(sd->name));
1081 	sd->grp_id = 1 << 16;   /* group ID for isp subdevs */
1082 	v4l2_set_subdevdata(sd, ccp2);
1083 	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1084 
1085 	pads[CCP2_PAD_SINK].flags = MEDIA_PAD_FL_SINK
1086 				    | MEDIA_PAD_FL_MUST_CONNECT;
1087 	pads[CCP2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
1088 
1089 	me->ops = &ccp2_media_ops;
1090 	ret = media_entity_pads_init(me, CCP2_PADS_NUM, pads);
1091 	if (ret < 0)
1092 		return ret;
1093 
1094 	ccp2_init_formats(sd, NULL);
1095 
1096 	/*
1097 	 * The CCP2 has weird line alignment requirements, possibly caused by
1098 	 * DPCM8 decompression. Line length for data read from memory must be a
1099 	 * multiple of 128 bits (16 bytes) in continuous mode (when no padding
1100 	 * is present at end of lines). Additionally, if padding is used, the
1101 	 * padded line length must be a multiple of 32 bytes. To simplify the
1102 	 * implementation we use a fixed 32 bytes alignment regardless of the
1103 	 * input format and width. If strict 128 bits alignment support is
1104 	 * required ispvideo will need to be made aware of this special dual
1105 	 * alignment requirements.
1106 	 */
1107 	ccp2->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
1108 	ccp2->video_in.bpl_alignment = 32;
1109 	ccp2->video_in.bpl_max = 0xffffffe0;
1110 	ccp2->video_in.isp = to_isp_device(ccp2);
1111 	ccp2->video_in.ops = &ccp2_video_ops;
1112 	ccp2->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;
1113 
1114 	ret = omap3isp_video_init(&ccp2->video_in, "CCP2");
1115 	if (ret < 0)
1116 		goto error;
1117 
1118 	return 0;
1119 
1120 error:
1121 	media_entity_cleanup(&ccp2->subdev.entity);
1122 	return ret;
1123 }
1124 
1125 /*
1126  * omap3isp_ccp2_init - CCP2 initialization.
1127  * @isp : Pointer to ISP device
1128  * return negative error code or zero on success
1129  */
omap3isp_ccp2_init(struct isp_device * isp)1130 int omap3isp_ccp2_init(struct isp_device *isp)
1131 {
1132 	struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
1133 	int ret;
1134 
1135 	init_waitqueue_head(&ccp2->wait);
1136 
1137 	/*
1138 	 * On the OMAP34xx the CSI1 receiver is operated in the CSIb IO
1139 	 * complex, which is powered by vdds_csib power rail. Hence the
1140 	 * request for the regulator.
1141 	 *
1142 	 * On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
1143 	 * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly
1144 	 * configured.
1145 	 *
1146 	 * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c).
1147 	 */
1148 	if (isp->revision == ISP_REVISION_2_0) {
1149 		ccp2->vdds_csib = devm_regulator_get(isp->dev, "vdds_csib");
1150 		if (IS_ERR(ccp2->vdds_csib)) {
1151 			if (PTR_ERR(ccp2->vdds_csib) == -EPROBE_DEFER) {
1152 				dev_dbg(isp->dev,
1153 					"Can't get regulator vdds_csib, deferring probing\n");
1154 				return -EPROBE_DEFER;
1155 			}
1156 			dev_dbg(isp->dev,
1157 				"Could not get regulator vdds_csib\n");
1158 			ccp2->vdds_csib = NULL;
1159 		}
1160 		ccp2->phy = &isp->isp_csiphy2;
1161 	} else if (isp->revision == ISP_REVISION_15_0) {
1162 		ccp2->phy = &isp->isp_csiphy1;
1163 	}
1164 
1165 	ret = ccp2_init_entities(ccp2);
1166 	if (ret < 0)
1167 		return ret;
1168 
1169 	ccp2_reset(ccp2);
1170 	return 0;
1171 }
1172 
1173 /*
1174  * omap3isp_ccp2_cleanup - CCP2 un-initialization
1175  * @isp : Pointer to ISP device
1176  */
omap3isp_ccp2_cleanup(struct isp_device * isp)1177 void omap3isp_ccp2_cleanup(struct isp_device *isp)
1178 {
1179 	struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
1180 
1181 	omap3isp_video_cleanup(&ccp2->video_in);
1182 	media_entity_cleanup(&ccp2->subdev.entity);
1183 }
1184