1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * vsp1_brx.c  --  R-Car VSP1 Blend ROP Unit (BRU and BRS)
4  *
5  * Copyright (C) 2013 Renesas Corporation
6  *
7  * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
8  */
9 
10 #include <linux/device.h>
11 #include <linux/gfp.h>
12 
13 #include <media/v4l2-subdev.h>
14 
15 #include "vsp1.h"
16 #include "vsp1_brx.h"
17 #include "vsp1_dl.h"
18 #include "vsp1_pipe.h"
19 #include "vsp1_rwpf.h"
20 #include "vsp1_video.h"
21 
22 #define BRX_MIN_SIZE				1U
23 #define BRX_MAX_SIZE				8190U
24 
25 /* -----------------------------------------------------------------------------
26  * Device Access
27  */
28 
vsp1_brx_write(struct vsp1_brx * brx,struct vsp1_dl_body * dlb,u32 reg,u32 data)29 static inline void vsp1_brx_write(struct vsp1_brx *brx,
30 				  struct vsp1_dl_body *dlb, u32 reg, u32 data)
31 {
32 	vsp1_dl_body_write(dlb, brx->base + reg, data);
33 }
34 
35 /* -----------------------------------------------------------------------------
36  * Controls
37  */
38 
brx_s_ctrl(struct v4l2_ctrl * ctrl)39 static int brx_s_ctrl(struct v4l2_ctrl *ctrl)
40 {
41 	struct vsp1_brx *brx =
42 		container_of(ctrl->handler, struct vsp1_brx, ctrls);
43 
44 	switch (ctrl->id) {
45 	case V4L2_CID_BG_COLOR:
46 		brx->bgcolor = ctrl->val;
47 		break;
48 	}
49 
50 	return 0;
51 }
52 
53 static const struct v4l2_ctrl_ops brx_ctrl_ops = {
54 	.s_ctrl = brx_s_ctrl,
55 };
56 
57 /* -----------------------------------------------------------------------------
58  * V4L2 Subdevice Operations
59  */
60 
61 /*
62  * The BRx can't perform format conversion, all sink and source formats must be
63  * identical. We pick the format on the first sink pad (pad 0) and propagate it
64  * to all other pads.
65  */
66 
brx_enum_mbus_code(struct v4l2_subdev * subdev,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_mbus_code_enum * code)67 static int brx_enum_mbus_code(struct v4l2_subdev *subdev,
68 			      struct v4l2_subdev_state *sd_state,
69 			      struct v4l2_subdev_mbus_code_enum *code)
70 {
71 	static const unsigned int codes[] = {
72 		MEDIA_BUS_FMT_ARGB8888_1X32,
73 		MEDIA_BUS_FMT_AYUV8_1X32,
74 	};
75 
76 	return vsp1_subdev_enum_mbus_code(subdev, sd_state, code, codes,
77 					  ARRAY_SIZE(codes));
78 }
79 
brx_enum_frame_size(struct v4l2_subdev * subdev,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_frame_size_enum * fse)80 static int brx_enum_frame_size(struct v4l2_subdev *subdev,
81 			       struct v4l2_subdev_state *sd_state,
82 			       struct v4l2_subdev_frame_size_enum *fse)
83 {
84 	if (fse->index)
85 		return -EINVAL;
86 
87 	if (fse->code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
88 	    fse->code != MEDIA_BUS_FMT_AYUV8_1X32)
89 		return -EINVAL;
90 
91 	fse->min_width = BRX_MIN_SIZE;
92 	fse->max_width = BRX_MAX_SIZE;
93 	fse->min_height = BRX_MIN_SIZE;
94 	fse->max_height = BRX_MAX_SIZE;
95 
96 	return 0;
97 }
98 
brx_get_compose(struct vsp1_brx * brx,struct v4l2_subdev_state * sd_state,unsigned int pad)99 static struct v4l2_rect *brx_get_compose(struct vsp1_brx *brx,
100 					 struct v4l2_subdev_state *sd_state,
101 					 unsigned int pad)
102 {
103 	return v4l2_subdev_get_try_compose(&brx->entity.subdev, sd_state, pad);
104 }
105 
brx_try_format(struct vsp1_brx * brx,struct v4l2_subdev_state * sd_state,unsigned int pad,struct v4l2_mbus_framefmt * fmt)106 static void brx_try_format(struct vsp1_brx *brx,
107 			   struct v4l2_subdev_state *sd_state,
108 			   unsigned int pad, struct v4l2_mbus_framefmt *fmt)
109 {
110 	struct v4l2_mbus_framefmt *format;
111 
112 	switch (pad) {
113 	case BRX_PAD_SINK(0):
114 		/* Default to YUV if the requested format is not supported. */
115 		if (fmt->code != MEDIA_BUS_FMT_ARGB8888_1X32 &&
116 		    fmt->code != MEDIA_BUS_FMT_AYUV8_1X32)
117 			fmt->code = MEDIA_BUS_FMT_AYUV8_1X32;
118 		break;
119 
120 	default:
121 		/* The BRx can't perform format conversion. */
122 		format = vsp1_entity_get_pad_format(&brx->entity, sd_state,
123 						    BRX_PAD_SINK(0));
124 		fmt->code = format->code;
125 		break;
126 	}
127 
128 	fmt->width = clamp(fmt->width, BRX_MIN_SIZE, BRX_MAX_SIZE);
129 	fmt->height = clamp(fmt->height, BRX_MIN_SIZE, BRX_MAX_SIZE);
130 	fmt->field = V4L2_FIELD_NONE;
131 	fmt->colorspace = V4L2_COLORSPACE_SRGB;
132 }
133 
brx_set_format(struct v4l2_subdev * subdev,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_format * fmt)134 static int brx_set_format(struct v4l2_subdev *subdev,
135 			  struct v4l2_subdev_state *sd_state,
136 			  struct v4l2_subdev_format *fmt)
137 {
138 	struct vsp1_brx *brx = to_brx(subdev);
139 	struct v4l2_subdev_state *config;
140 	struct v4l2_mbus_framefmt *format;
141 	int ret = 0;
142 
143 	mutex_lock(&brx->entity.lock);
144 
145 	config = vsp1_entity_get_pad_config(&brx->entity, sd_state,
146 					    fmt->which);
147 	if (!config) {
148 		ret = -EINVAL;
149 		goto done;
150 	}
151 
152 	brx_try_format(brx, config, fmt->pad, &fmt->format);
153 
154 	format = vsp1_entity_get_pad_format(&brx->entity, config, fmt->pad);
155 	*format = fmt->format;
156 
157 	/* Reset the compose rectangle. */
158 	if (fmt->pad != brx->entity.source_pad) {
159 		struct v4l2_rect *compose;
160 
161 		compose = brx_get_compose(brx, config, fmt->pad);
162 		compose->left = 0;
163 		compose->top = 0;
164 		compose->width = format->width;
165 		compose->height = format->height;
166 	}
167 
168 	/* Propagate the format code to all pads. */
169 	if (fmt->pad == BRX_PAD_SINK(0)) {
170 		unsigned int i;
171 
172 		for (i = 0; i <= brx->entity.source_pad; ++i) {
173 			format = vsp1_entity_get_pad_format(&brx->entity,
174 							    config, i);
175 			format->code = fmt->format.code;
176 		}
177 	}
178 
179 done:
180 	mutex_unlock(&brx->entity.lock);
181 	return ret;
182 }
183 
brx_get_selection(struct v4l2_subdev * subdev,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_selection * sel)184 static int brx_get_selection(struct v4l2_subdev *subdev,
185 			     struct v4l2_subdev_state *sd_state,
186 			     struct v4l2_subdev_selection *sel)
187 {
188 	struct vsp1_brx *brx = to_brx(subdev);
189 	struct v4l2_subdev_state *config;
190 
191 	if (sel->pad == brx->entity.source_pad)
192 		return -EINVAL;
193 
194 	switch (sel->target) {
195 	case V4L2_SEL_TGT_COMPOSE_BOUNDS:
196 		sel->r.left = 0;
197 		sel->r.top = 0;
198 		sel->r.width = BRX_MAX_SIZE;
199 		sel->r.height = BRX_MAX_SIZE;
200 		return 0;
201 
202 	case V4L2_SEL_TGT_COMPOSE:
203 		config = vsp1_entity_get_pad_config(&brx->entity, sd_state,
204 						    sel->which);
205 		if (!config)
206 			return -EINVAL;
207 
208 		mutex_lock(&brx->entity.lock);
209 		sel->r = *brx_get_compose(brx, config, sel->pad);
210 		mutex_unlock(&brx->entity.lock);
211 		return 0;
212 
213 	default:
214 		return -EINVAL;
215 	}
216 }
217 
brx_set_selection(struct v4l2_subdev * subdev,struct v4l2_subdev_state * sd_state,struct v4l2_subdev_selection * sel)218 static int brx_set_selection(struct v4l2_subdev *subdev,
219 			     struct v4l2_subdev_state *sd_state,
220 			     struct v4l2_subdev_selection *sel)
221 {
222 	struct vsp1_brx *brx = to_brx(subdev);
223 	struct v4l2_subdev_state *config;
224 	struct v4l2_mbus_framefmt *format;
225 	struct v4l2_rect *compose;
226 	int ret = 0;
227 
228 	if (sel->pad == brx->entity.source_pad)
229 		return -EINVAL;
230 
231 	if (sel->target != V4L2_SEL_TGT_COMPOSE)
232 		return -EINVAL;
233 
234 	mutex_lock(&brx->entity.lock);
235 
236 	config = vsp1_entity_get_pad_config(&brx->entity, sd_state,
237 					    sel->which);
238 	if (!config) {
239 		ret = -EINVAL;
240 		goto done;
241 	}
242 
243 	/*
244 	 * The compose rectangle top left corner must be inside the output
245 	 * frame.
246 	 */
247 	format = vsp1_entity_get_pad_format(&brx->entity, config,
248 					    brx->entity.source_pad);
249 	sel->r.left = clamp_t(unsigned int, sel->r.left, 0, format->width - 1);
250 	sel->r.top = clamp_t(unsigned int, sel->r.top, 0, format->height - 1);
251 
252 	/*
253 	 * Scaling isn't supported, the compose rectangle size must be identical
254 	 * to the sink format size.
255 	 */
256 	format = vsp1_entity_get_pad_format(&brx->entity, config, sel->pad);
257 	sel->r.width = format->width;
258 	sel->r.height = format->height;
259 
260 	compose = brx_get_compose(brx, config, sel->pad);
261 	*compose = sel->r;
262 
263 done:
264 	mutex_unlock(&brx->entity.lock);
265 	return ret;
266 }
267 
268 static const struct v4l2_subdev_pad_ops brx_pad_ops = {
269 	.init_cfg = vsp1_entity_init_cfg,
270 	.enum_mbus_code = brx_enum_mbus_code,
271 	.enum_frame_size = brx_enum_frame_size,
272 	.get_fmt = vsp1_subdev_get_pad_format,
273 	.set_fmt = brx_set_format,
274 	.get_selection = brx_get_selection,
275 	.set_selection = brx_set_selection,
276 };
277 
278 static const struct v4l2_subdev_ops brx_ops = {
279 	.pad    = &brx_pad_ops,
280 };
281 
282 /* -----------------------------------------------------------------------------
283  * VSP1 Entity Operations
284  */
285 
brx_configure_stream(struct vsp1_entity * entity,struct vsp1_pipeline * pipe,struct vsp1_dl_list * dl,struct vsp1_dl_body * dlb)286 static void brx_configure_stream(struct vsp1_entity *entity,
287 				 struct vsp1_pipeline *pipe,
288 				 struct vsp1_dl_list *dl,
289 				 struct vsp1_dl_body *dlb)
290 {
291 	struct vsp1_brx *brx = to_brx(&entity->subdev);
292 	struct v4l2_mbus_framefmt *format;
293 	unsigned int flags;
294 	unsigned int i;
295 
296 	format = vsp1_entity_get_pad_format(&brx->entity, brx->entity.config,
297 					    brx->entity.source_pad);
298 
299 	/*
300 	 * The hardware is extremely flexible but we have no userspace API to
301 	 * expose all the parameters, nor is it clear whether we would have use
302 	 * cases for all the supported modes. Let's just hardcode the parameters
303 	 * to sane default values for now.
304 	 */
305 
306 	/*
307 	 * Disable dithering and enable color data normalization unless the
308 	 * format at the pipeline output is premultiplied.
309 	 */
310 	flags = pipe->output ? pipe->output->format.flags : 0;
311 	vsp1_brx_write(brx, dlb, VI6_BRU_INCTRL,
312 		       flags & V4L2_PIX_FMT_FLAG_PREMUL_ALPHA ?
313 		       0 : VI6_BRU_INCTRL_NRM);
314 
315 	/*
316 	 * Set the background position to cover the whole output image and
317 	 * configure its color.
318 	 */
319 	vsp1_brx_write(brx, dlb, VI6_BRU_VIRRPF_SIZE,
320 		       (format->width << VI6_BRU_VIRRPF_SIZE_HSIZE_SHIFT) |
321 		       (format->height << VI6_BRU_VIRRPF_SIZE_VSIZE_SHIFT));
322 	vsp1_brx_write(brx, dlb, VI6_BRU_VIRRPF_LOC, 0);
323 
324 	vsp1_brx_write(brx, dlb, VI6_BRU_VIRRPF_COL, brx->bgcolor |
325 		       (0xff << VI6_BRU_VIRRPF_COL_A_SHIFT));
326 
327 	/*
328 	 * Route BRU input 1 as SRC input to the ROP unit and configure the ROP
329 	 * unit with a NOP operation to make BRU input 1 available as the
330 	 * Blend/ROP unit B SRC input. Only needed for BRU, the BRS has no ROP
331 	 * unit.
332 	 */
333 	if (entity->type == VSP1_ENTITY_BRU)
334 		vsp1_brx_write(brx, dlb, VI6_BRU_ROP,
335 			       VI6_BRU_ROP_DSTSEL_BRUIN(1) |
336 			       VI6_BRU_ROP_CROP(VI6_ROP_NOP) |
337 			       VI6_BRU_ROP_AROP(VI6_ROP_NOP));
338 
339 	for (i = 0; i < brx->entity.source_pad; ++i) {
340 		bool premultiplied = false;
341 		u32 ctrl = 0;
342 
343 		/*
344 		 * Configure all Blend/ROP units corresponding to an enabled BRx
345 		 * input for alpha blending. Blend/ROP units corresponding to
346 		 * disabled BRx inputs are used in ROP NOP mode to ignore the
347 		 * SRC input.
348 		 */
349 		if (brx->inputs[i].rpf) {
350 			ctrl |= VI6_BRU_CTRL_RBC;
351 
352 			premultiplied = brx->inputs[i].rpf->format.flags
353 				      & V4L2_PIX_FMT_FLAG_PREMUL_ALPHA;
354 		} else {
355 			ctrl |= VI6_BRU_CTRL_CROP(VI6_ROP_NOP)
356 			     |  VI6_BRU_CTRL_AROP(VI6_ROP_NOP);
357 		}
358 
359 		/*
360 		 * Select the virtual RPF as the Blend/ROP unit A DST input to
361 		 * serve as a background color.
362 		 */
363 		if (i == 0)
364 			ctrl |= VI6_BRU_CTRL_DSTSEL_VRPF;
365 
366 		/*
367 		 * Route inputs 0 to 3 as SRC inputs to Blend/ROP units A to D
368 		 * in that order. In the BRU the Blend/ROP unit B SRC is
369 		 * hardwired to the ROP unit output, the corresponding register
370 		 * bits must be set to 0. The BRS has no ROP unit and doesn't
371 		 * need any special processing.
372 		 */
373 		if (!(entity->type == VSP1_ENTITY_BRU && i == 1))
374 			ctrl |= VI6_BRU_CTRL_SRCSEL_BRUIN(i);
375 
376 		vsp1_brx_write(brx, dlb, VI6_BRU_CTRL(i), ctrl);
377 
378 		/*
379 		 * Hardcode the blending formula to
380 		 *
381 		 *	DSTc = DSTc * (1 - SRCa) + SRCc * SRCa
382 		 *	DSTa = DSTa * (1 - SRCa) + SRCa
383 		 *
384 		 * when the SRC input isn't premultiplied, and to
385 		 *
386 		 *	DSTc = DSTc * (1 - SRCa) + SRCc
387 		 *	DSTa = DSTa * (1 - SRCa) + SRCa
388 		 *
389 		 * otherwise.
390 		 */
391 		vsp1_brx_write(brx, dlb, VI6_BRU_BLD(i),
392 			       VI6_BRU_BLD_CCMDX_255_SRC_A |
393 			       (premultiplied ? VI6_BRU_BLD_CCMDY_COEFY :
394 						VI6_BRU_BLD_CCMDY_SRC_A) |
395 			       VI6_BRU_BLD_ACMDX_255_SRC_A |
396 			       VI6_BRU_BLD_ACMDY_COEFY |
397 			       (0xff << VI6_BRU_BLD_COEFY_SHIFT));
398 	}
399 }
400 
401 static const struct vsp1_entity_operations brx_entity_ops = {
402 	.configure_stream = brx_configure_stream,
403 };
404 
405 /* -----------------------------------------------------------------------------
406  * Initialization and Cleanup
407  */
408 
vsp1_brx_create(struct vsp1_device * vsp1,enum vsp1_entity_type type)409 struct vsp1_brx *vsp1_brx_create(struct vsp1_device *vsp1,
410 				 enum vsp1_entity_type type)
411 {
412 	struct vsp1_brx *brx;
413 	unsigned int num_pads;
414 	const char *name;
415 	int ret;
416 
417 	brx = devm_kzalloc(vsp1->dev, sizeof(*brx), GFP_KERNEL);
418 	if (brx == NULL)
419 		return ERR_PTR(-ENOMEM);
420 
421 	brx->base = type == VSP1_ENTITY_BRU ? VI6_BRU_BASE : VI6_BRS_BASE;
422 	brx->entity.ops = &brx_entity_ops;
423 	brx->entity.type = type;
424 
425 	if (type == VSP1_ENTITY_BRU) {
426 		num_pads = vsp1->info->num_bru_inputs + 1;
427 		name = "bru";
428 	} else {
429 		num_pads = 3;
430 		name = "brs";
431 	}
432 
433 	ret = vsp1_entity_init(vsp1, &brx->entity, name, num_pads, &brx_ops,
434 			       MEDIA_ENT_F_PROC_VIDEO_COMPOSER);
435 	if (ret < 0)
436 		return ERR_PTR(ret);
437 
438 	/* Initialize the control handler. */
439 	v4l2_ctrl_handler_init(&brx->ctrls, 1);
440 	v4l2_ctrl_new_std(&brx->ctrls, &brx_ctrl_ops, V4L2_CID_BG_COLOR,
441 			  0, 0xffffff, 1, 0);
442 
443 	brx->bgcolor = 0;
444 
445 	brx->entity.subdev.ctrl_handler = &brx->ctrls;
446 
447 	if (brx->ctrls.error) {
448 		dev_err(vsp1->dev, "%s: failed to initialize controls\n", name);
449 		ret = brx->ctrls.error;
450 		vsp1_entity_destroy(&brx->entity);
451 		return ERR_PTR(ret);
452 	}
453 
454 	return brx;
455 }
456