1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Watchdog driver for Broadcom BCM2835
4 *
5 * "bcm2708_wdog" driver written by Luke Diamand that was obtained from
6 * branch "rpi-3.6.y" of git://github.com/raspberrypi/linux.git was used
7 * as a hardware reference for the Broadcom BCM2835 watchdog timer.
8 *
9 * Copyright (C) 2013 Lubomir Rintel <lkundrak@v3.sk>
10 *
11 */
12
13 #include <linux/delay.h>
14 #include <linux/types.h>
15 #include <linux/mfd/bcm2835-pm.h>
16 #include <linux/module.h>
17 #include <linux/io.h>
18 #include <linux/watchdog.h>
19 #include <linux/platform_device.h>
20 #include <linux/of_address.h>
21 #include <linux/of_platform.h>
22
23 #define PM_RSTC 0x1c
24 #define PM_RSTS 0x20
25 #define PM_WDOG 0x24
26
27 #define PM_PASSWORD 0x5a000000
28
29 #define PM_WDOG_TIME_SET 0x000fffff
30 #define PM_RSTC_WRCFG_CLR 0xffffffcf
31 #define PM_RSTS_HADWRH_SET 0x00000040
32 #define PM_RSTC_WRCFG_SET 0x00000030
33 #define PM_RSTC_WRCFG_FULL_RESET 0x00000020
34 #define PM_RSTC_RESET 0x00000102
35
36 /*
37 * The Raspberry Pi firmware uses the RSTS register to know which partition
38 * to boot from. The partition value is spread into bits 0, 2, 4, 6, 8, 10.
39 * Partition 63 is a special partition used by the firmware to indicate halt.
40 */
41 #define PM_RSTS_RASPBERRYPI_HALT 0x555
42
43 #define SECS_TO_WDOG_TICKS(x) ((x) << 16)
44 #define WDOG_TICKS_TO_SECS(x) ((x) >> 16)
45 #define WDOG_TICKS_TO_MSECS(x) ((x) * 1000 >> 16)
46
47 struct bcm2835_wdt {
48 void __iomem *base;
49 spinlock_t lock;
50 };
51
52 static struct bcm2835_wdt *bcm2835_power_off_wdt;
53
54 static unsigned int heartbeat;
55 static bool nowayout = WATCHDOG_NOWAYOUT;
56
bcm2835_wdt_is_running(struct bcm2835_wdt * wdt)57 static bool bcm2835_wdt_is_running(struct bcm2835_wdt *wdt)
58 {
59 uint32_t cur;
60
61 cur = readl(wdt->base + PM_RSTC);
62
63 return !!(cur & PM_RSTC_WRCFG_FULL_RESET);
64 }
65
bcm2835_wdt_start(struct watchdog_device * wdog)66 static int bcm2835_wdt_start(struct watchdog_device *wdog)
67 {
68 struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
69 uint32_t cur;
70 unsigned long flags;
71
72 spin_lock_irqsave(&wdt->lock, flags);
73
74 writel_relaxed(PM_PASSWORD | (SECS_TO_WDOG_TICKS(wdog->timeout) &
75 PM_WDOG_TIME_SET), wdt->base + PM_WDOG);
76 cur = readl_relaxed(wdt->base + PM_RSTC);
77 writel_relaxed(PM_PASSWORD | (cur & PM_RSTC_WRCFG_CLR) |
78 PM_RSTC_WRCFG_FULL_RESET, wdt->base + PM_RSTC);
79
80 spin_unlock_irqrestore(&wdt->lock, flags);
81
82 return 0;
83 }
84
bcm2835_wdt_stop(struct watchdog_device * wdog)85 static int bcm2835_wdt_stop(struct watchdog_device *wdog)
86 {
87 struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
88
89 writel_relaxed(PM_PASSWORD | PM_RSTC_RESET, wdt->base + PM_RSTC);
90 return 0;
91 }
92
bcm2835_wdt_get_timeleft(struct watchdog_device * wdog)93 static unsigned int bcm2835_wdt_get_timeleft(struct watchdog_device *wdog)
94 {
95 struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
96
97 uint32_t ret = readl_relaxed(wdt->base + PM_WDOG);
98 return WDOG_TICKS_TO_SECS(ret & PM_WDOG_TIME_SET);
99 }
100
__bcm2835_restart(struct bcm2835_wdt * wdt)101 static void __bcm2835_restart(struct bcm2835_wdt *wdt)
102 {
103 u32 val;
104
105 /* use a timeout of 10 ticks (~150us) */
106 writel_relaxed(10 | PM_PASSWORD, wdt->base + PM_WDOG);
107 val = readl_relaxed(wdt->base + PM_RSTC);
108 val &= PM_RSTC_WRCFG_CLR;
109 val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET;
110 writel_relaxed(val, wdt->base + PM_RSTC);
111
112 /* No sleeping, possibly atomic. */
113 mdelay(1);
114 }
115
bcm2835_restart(struct watchdog_device * wdog,unsigned long action,void * data)116 static int bcm2835_restart(struct watchdog_device *wdog,
117 unsigned long action, void *data)
118 {
119 struct bcm2835_wdt *wdt = watchdog_get_drvdata(wdog);
120
121 __bcm2835_restart(wdt);
122
123 return 0;
124 }
125
126 static const struct watchdog_ops bcm2835_wdt_ops = {
127 .owner = THIS_MODULE,
128 .start = bcm2835_wdt_start,
129 .stop = bcm2835_wdt_stop,
130 .get_timeleft = bcm2835_wdt_get_timeleft,
131 .restart = bcm2835_restart,
132 };
133
134 static const struct watchdog_info bcm2835_wdt_info = {
135 .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
136 WDIOF_KEEPALIVEPING,
137 .identity = "Broadcom BCM2835 Watchdog timer",
138 };
139
140 static struct watchdog_device bcm2835_wdt_wdd = {
141 .info = &bcm2835_wdt_info,
142 .ops = &bcm2835_wdt_ops,
143 .min_timeout = 1,
144 .max_hw_heartbeat_ms = WDOG_TICKS_TO_MSECS(PM_WDOG_TIME_SET),
145 .timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET),
146 };
147
148 /*
149 * We can't really power off, but if we do the normal reset scheme, and
150 * indicate to bootcode.bin not to reboot, then most of the chip will be
151 * powered off.
152 */
bcm2835_power_off(void)153 static void bcm2835_power_off(void)
154 {
155 struct bcm2835_wdt *wdt = bcm2835_power_off_wdt;
156 u32 val;
157
158 /*
159 * We set the watchdog hard reset bit here to distinguish this reset
160 * from the normal (full) reset. bootcode.bin will not reboot after a
161 * hard reset.
162 */
163 val = readl_relaxed(wdt->base + PM_RSTS);
164 val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT;
165 writel_relaxed(val, wdt->base + PM_RSTS);
166
167 /* Continue with normal reset mechanism */
168 __bcm2835_restart(wdt);
169 }
170
bcm2835_wdt_probe(struct platform_device * pdev)171 static int bcm2835_wdt_probe(struct platform_device *pdev)
172 {
173 struct bcm2835_pm *pm = dev_get_drvdata(pdev->dev.parent);
174 struct device *dev = &pdev->dev;
175 struct bcm2835_wdt *wdt;
176 int err;
177
178 wdt = devm_kzalloc(dev, sizeof(struct bcm2835_wdt), GFP_KERNEL);
179 if (!wdt)
180 return -ENOMEM;
181
182 spin_lock_init(&wdt->lock);
183
184 wdt->base = pm->base;
185
186 watchdog_set_drvdata(&bcm2835_wdt_wdd, wdt);
187 watchdog_init_timeout(&bcm2835_wdt_wdd, heartbeat, dev);
188 watchdog_set_nowayout(&bcm2835_wdt_wdd, nowayout);
189 bcm2835_wdt_wdd.parent = dev;
190 if (bcm2835_wdt_is_running(wdt)) {
191 /*
192 * The currently active timeout value (set by the
193 * bootloader) may be different from the module
194 * heartbeat parameter or the value in device
195 * tree. But we just need to set WDOG_HW_RUNNING,
196 * because then the framework will "immediately" ping
197 * the device, updating the timeout.
198 */
199 set_bit(WDOG_HW_RUNNING, &bcm2835_wdt_wdd.status);
200 }
201
202 watchdog_set_restart_priority(&bcm2835_wdt_wdd, 128);
203
204 watchdog_stop_on_reboot(&bcm2835_wdt_wdd);
205 err = devm_watchdog_register_device(dev, &bcm2835_wdt_wdd);
206 if (err)
207 return err;
208
209 if (of_device_is_system_power_controller(pdev->dev.parent->of_node)) {
210 if (!pm_power_off) {
211 pm_power_off = bcm2835_power_off;
212 bcm2835_power_off_wdt = wdt;
213 } else {
214 dev_info(dev, "Poweroff handler already present!\n");
215 }
216 }
217
218 dev_info(dev, "Broadcom BCM2835 watchdog timer");
219 return 0;
220 }
221
bcm2835_wdt_remove(struct platform_device * pdev)222 static void bcm2835_wdt_remove(struct platform_device *pdev)
223 {
224 if (pm_power_off == bcm2835_power_off)
225 pm_power_off = NULL;
226 }
227
228 static struct platform_driver bcm2835_wdt_driver = {
229 .probe = bcm2835_wdt_probe,
230 .remove_new = bcm2835_wdt_remove,
231 .driver = {
232 .name = "bcm2835-wdt",
233 },
234 };
235 module_platform_driver(bcm2835_wdt_driver);
236
237 module_param(heartbeat, uint, 0);
238 MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
239
240 module_param(nowayout, bool, 0);
241 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
242 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
243
244 MODULE_ALIAS("platform:bcm2835-wdt");
245 MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
246 MODULE_DESCRIPTION("Driver for Broadcom BCM2835 watchdog timer");
247 MODULE_LICENSE("GPL");
248