1 /*
2 * Raspberry Pi (BCM2835) SD Host Controller
3 *
4 * Copyright (c) 2017 Antfield SAS
5 *
6 * Authors:
7 * Clement Deschamps <clement.deschamps@antfield.fr>
8 * Luc Michel <luc.michel@antfield.fr>
9 *
10 * This work is licensed under the terms of the GNU GPL, version 2 or later.
11 * See the COPYING file in the top-level directory.
12 */
13
14 #include "qemu/osdep.h"
15 #include "qemu/log.h"
16 #include "qemu/module.h"
17 #include "sysemu/blockdev.h"
18 #include "hw/irq.h"
19 #include "hw/sd/bcm2835_sdhost.h"
20 #include "migration/vmstate.h"
21 #include "trace.h"
22 #include "qom/object.h"
23
24 #define TYPE_BCM2835_SDHOST_BUS "bcm2835-sdhost-bus"
25 /* This is reusing the SDBus typedef from SD_BUS */
DECLARE_INSTANCE_CHECKER(SDBus,BCM2835_SDHOST_BUS,TYPE_BCM2835_SDHOST_BUS)26 DECLARE_INSTANCE_CHECKER(SDBus, BCM2835_SDHOST_BUS,
27 TYPE_BCM2835_SDHOST_BUS)
28
29 #define SDCMD 0x00 /* Command to SD card - 16 R/W */
30 #define SDARG 0x04 /* Argument to SD card - 32 R/W */
31 #define SDTOUT 0x08 /* Start value for timeout counter - 32 R/W */
32 #define SDCDIV 0x0c /* Start value for clock divider - 11 R/W */
33 #define SDRSP0 0x10 /* SD card rsp (31:0) - 32 R */
34 #define SDRSP1 0x14 /* SD card rsp (63:32) - 32 R */
35 #define SDRSP2 0x18 /* SD card rsp (95:64) - 32 R */
36 #define SDRSP3 0x1c /* SD card rsp (127:96) - 32 R */
37 #define SDHSTS 0x20 /* SD host status - 11 R */
38 #define SDVDD 0x30 /* SD card power control - 1 R/W */
39 #define SDEDM 0x34 /* Emergency Debug Mode - 13 R/W */
40 #define SDHCFG 0x38 /* Host configuration - 2 R/W */
41 #define SDHBCT 0x3c /* Host byte count (debug) - 32 R/W */
42 #define SDDATA 0x40 /* Data to/from SD card - 32 R/W */
43 #define SDHBLC 0x50 /* Host block count (SDIO/SDHC) - 9 R/W */
44
45 #define SDCMD_NEW_FLAG 0x8000
46 #define SDCMD_FAIL_FLAG 0x4000
47 #define SDCMD_BUSYWAIT 0x800
48 #define SDCMD_NO_RESPONSE 0x400
49 #define SDCMD_LONG_RESPONSE 0x200
50 #define SDCMD_WRITE_CMD 0x80
51 #define SDCMD_READ_CMD 0x40
52 #define SDCMD_CMD_MASK 0x3f
53
54 #define SDCDIV_MAX_CDIV 0x7ff
55
56 #define SDHSTS_BUSY_IRPT 0x400
57 #define SDHSTS_BLOCK_IRPT 0x200
58 #define SDHSTS_SDIO_IRPT 0x100
59 #define SDHSTS_REW_TIME_OUT 0x80
60 #define SDHSTS_CMD_TIME_OUT 0x40
61 #define SDHSTS_CRC16_ERROR 0x20
62 #define SDHSTS_CRC7_ERROR 0x10
63 #define SDHSTS_FIFO_ERROR 0x08
64 /* Reserved */
65 /* Reserved */
66 #define SDHSTS_DATA_FLAG 0x01
67
68 #define SDHCFG_BUSY_IRPT_EN (1 << 10)
69 #define SDHCFG_BLOCK_IRPT_EN (1 << 8)
70 #define SDHCFG_SDIO_IRPT_EN (1 << 5)
71 #define SDHCFG_DATA_IRPT_EN (1 << 4)
72 #define SDHCFG_SLOW_CARD (1 << 3)
73 #define SDHCFG_WIDE_EXT_BUS (1 << 2)
74 #define SDHCFG_WIDE_INT_BUS (1 << 1)
75 #define SDHCFG_REL_CMD_LINE (1 << 0)
76
77 #define SDEDM_FORCE_DATA_MODE (1 << 19)
78 #define SDEDM_CLOCK_PULSE (1 << 20)
79 #define SDEDM_BYPASS (1 << 21)
80
81 #define SDEDM_WRITE_THRESHOLD_SHIFT 9
82 #define SDEDM_READ_THRESHOLD_SHIFT 14
83 #define SDEDM_THRESHOLD_MASK 0x1f
84
85 #define SDEDM_FSM_MASK 0xf
86 #define SDEDM_FSM_IDENTMODE 0x0
87 #define SDEDM_FSM_DATAMODE 0x1
88 #define SDEDM_FSM_READDATA 0x2
89 #define SDEDM_FSM_WRITEDATA 0x3
90 #define SDEDM_FSM_READWAIT 0x4
91 #define SDEDM_FSM_READCRC 0x5
92 #define SDEDM_FSM_WRITECRC 0x6
93 #define SDEDM_FSM_WRITEWAIT1 0x7
94 #define SDEDM_FSM_POWERDOWN 0x8
95 #define SDEDM_FSM_POWERUP 0x9
96 #define SDEDM_FSM_WRITESTART1 0xa
97 #define SDEDM_FSM_WRITESTART2 0xb
98 #define SDEDM_FSM_GENPULSES 0xc
99 #define SDEDM_FSM_WRITEWAIT2 0xd
100 #define SDEDM_FSM_STARTPOWDOWN 0xf
101
102 #define SDDATA_FIFO_WORDS 16
103
104 static void bcm2835_sdhost_update_irq(BCM2835SDHostState *s)
105 {
106 uint32_t irq = s->status &
107 (SDHSTS_BUSY_IRPT | SDHSTS_BLOCK_IRPT | SDHSTS_SDIO_IRPT);
108 trace_bcm2835_sdhost_update_irq(irq);
109 qemu_set_irq(s->irq, !!irq);
110 }
111
bcm2835_sdhost_send_command(BCM2835SDHostState * s)112 static void bcm2835_sdhost_send_command(BCM2835SDHostState *s)
113 {
114 SDRequest request;
115 uint8_t rsp[16];
116 int rlen;
117
118 request.cmd = s->cmd & SDCMD_CMD_MASK;
119 request.arg = s->cmdarg;
120
121 rlen = sdbus_do_command(&s->sdbus, &request, rsp);
122 if (rlen < 0) {
123 goto error;
124 }
125 if (!(s->cmd & SDCMD_NO_RESPONSE)) {
126 if (rlen == 0 || (rlen == 4 && (s->cmd & SDCMD_LONG_RESPONSE))) {
127 goto error;
128 }
129 if (rlen != 4 && rlen != 16) {
130 goto error;
131 }
132 if (rlen == 4) {
133 s->rsp[0] = ldl_be_p(&rsp[0]);
134 s->rsp[1] = s->rsp[2] = s->rsp[3] = 0;
135 } else {
136 s->rsp[0] = ldl_be_p(&rsp[12]);
137 s->rsp[1] = ldl_be_p(&rsp[8]);
138 s->rsp[2] = ldl_be_p(&rsp[4]);
139 s->rsp[3] = ldl_be_p(&rsp[0]);
140 }
141 }
142 /* We never really delay commands, so if this was a 'busywait' command
143 * then we've completed it now and can raise the interrupt.
144 */
145 if ((s->cmd & SDCMD_BUSYWAIT) && (s->config & SDHCFG_BUSY_IRPT_EN)) {
146 s->status |= SDHSTS_BUSY_IRPT;
147 }
148 return;
149
150 error:
151 s->cmd |= SDCMD_FAIL_FLAG;
152 s->status |= SDHSTS_CMD_TIME_OUT;
153 }
154
bcm2835_sdhost_fifo_push(BCM2835SDHostState * s,uint32_t value)155 static void bcm2835_sdhost_fifo_push(BCM2835SDHostState *s, uint32_t value)
156 {
157 int n;
158
159 if (s->fifo_len == BCM2835_SDHOST_FIFO_LEN) {
160 /* FIFO overflow */
161 return;
162 }
163 n = (s->fifo_pos + s->fifo_len) & (BCM2835_SDHOST_FIFO_LEN - 1);
164 s->fifo_len++;
165 s->fifo[n] = value;
166 }
167
bcm2835_sdhost_fifo_pop(BCM2835SDHostState * s)168 static uint32_t bcm2835_sdhost_fifo_pop(BCM2835SDHostState *s)
169 {
170 uint32_t value;
171
172 if (s->fifo_len == 0) {
173 /* FIFO underflow */
174 return 0;
175 }
176 value = s->fifo[s->fifo_pos];
177 s->fifo_len--;
178 s->fifo_pos = (s->fifo_pos + 1) & (BCM2835_SDHOST_FIFO_LEN - 1);
179 return value;
180 }
181
bcm2835_sdhost_fifo_run(BCM2835SDHostState * s)182 static void bcm2835_sdhost_fifo_run(BCM2835SDHostState *s)
183 {
184 uint32_t value = 0;
185 int n;
186 int is_read;
187 int is_write;
188
189 is_read = (s->cmd & SDCMD_READ_CMD) != 0;
190 is_write = (s->cmd & SDCMD_WRITE_CMD) != 0;
191 if (s->datacnt != 0 && (is_write || sdbus_data_ready(&s->sdbus))) {
192 if (is_read) {
193 n = 0;
194 while (s->datacnt && s->fifo_len < BCM2835_SDHOST_FIFO_LEN) {
195 value |= (uint32_t)sdbus_read_byte(&s->sdbus) << (n * 8);
196 s->datacnt--;
197 n++;
198 if (n == 4) {
199 bcm2835_sdhost_fifo_push(s, value);
200 s->status |= SDHSTS_DATA_FLAG;
201 if (s->config & SDHCFG_DATA_IRPT_EN) {
202 s->status |= SDHSTS_SDIO_IRPT;
203 }
204 n = 0;
205 value = 0;
206 }
207 }
208 if (n != 0) {
209 bcm2835_sdhost_fifo_push(s, value);
210 s->status |= SDHSTS_DATA_FLAG;
211 if (s->config & SDHCFG_DATA_IRPT_EN) {
212 s->status |= SDHSTS_SDIO_IRPT;
213 }
214 }
215 } else if (is_write) { /* write */
216 n = 0;
217 while (s->datacnt > 0 && (s->fifo_len > 0 || n > 0)) {
218 if (n == 0) {
219 value = bcm2835_sdhost_fifo_pop(s);
220 s->status |= SDHSTS_DATA_FLAG;
221 if (s->config & SDHCFG_DATA_IRPT_EN) {
222 s->status |= SDHSTS_SDIO_IRPT;
223 }
224 n = 4;
225 }
226 n--;
227 s->datacnt--;
228 sdbus_write_byte(&s->sdbus, value & 0xff);
229 value >>= 8;
230 }
231 }
232 if (s->datacnt == 0) {
233 s->edm &= ~SDEDM_FSM_MASK;
234 s->edm |= SDEDM_FSM_DATAMODE;
235 trace_bcm2835_sdhost_edm_change("datacnt 0", s->edm);
236 }
237 if (is_write) {
238 /* set block interrupt at end of each block transfer */
239 if (s->hbct && s->datacnt % s->hbct == 0 &&
240 (s->config & SDHCFG_BLOCK_IRPT_EN)) {
241 s->status |= SDHSTS_BLOCK_IRPT;
242 }
243 /* set data interrupt after each transfer */
244 s->status |= SDHSTS_DATA_FLAG;
245 if (s->config & SDHCFG_DATA_IRPT_EN) {
246 s->status |= SDHSTS_SDIO_IRPT;
247 }
248 }
249 }
250
251 bcm2835_sdhost_update_irq(s);
252
253 s->edm &= ~(0x1f << 4);
254 s->edm |= ((s->fifo_len & 0x1f) << 4);
255 trace_bcm2835_sdhost_edm_change("fifo run", s->edm);
256 }
257
bcm2835_sdhost_read(void * opaque,hwaddr offset,unsigned size)258 static uint64_t bcm2835_sdhost_read(void *opaque, hwaddr offset,
259 unsigned size)
260 {
261 BCM2835SDHostState *s = (BCM2835SDHostState *)opaque;
262 uint32_t res = 0;
263
264 switch (offset) {
265 case SDCMD:
266 res = s->cmd;
267 break;
268 case SDHSTS:
269 res = s->status;
270 break;
271 case SDRSP0:
272 res = s->rsp[0];
273 break;
274 case SDRSP1:
275 res = s->rsp[1];
276 break;
277 case SDRSP2:
278 res = s->rsp[2];
279 break;
280 case SDRSP3:
281 res = s->rsp[3];
282 break;
283 case SDEDM:
284 res = s->edm;
285 break;
286 case SDVDD:
287 res = s->vdd;
288 break;
289 case SDDATA:
290 res = bcm2835_sdhost_fifo_pop(s);
291 bcm2835_sdhost_fifo_run(s);
292 break;
293 case SDHBCT:
294 res = s->hbct;
295 break;
296 case SDHBLC:
297 res = s->hblc;
298 break;
299
300 default:
301 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
302 __func__, offset);
303 res = 0;
304 break;
305 }
306
307 trace_bcm2835_sdhost_read(offset, res, size);
308
309 return res;
310 }
311
bcm2835_sdhost_write(void * opaque,hwaddr offset,uint64_t value,unsigned size)312 static void bcm2835_sdhost_write(void *opaque, hwaddr offset,
313 uint64_t value, unsigned size)
314 {
315 BCM2835SDHostState *s = (BCM2835SDHostState *)opaque;
316
317 trace_bcm2835_sdhost_write(offset, value, size);
318
319 switch (offset) {
320 case SDCMD:
321 s->cmd = value;
322 if (value & SDCMD_NEW_FLAG) {
323 bcm2835_sdhost_send_command(s);
324 bcm2835_sdhost_fifo_run(s);
325 s->cmd &= ~SDCMD_NEW_FLAG;
326 }
327 break;
328 case SDTOUT:
329 break;
330 case SDCDIV:
331 break;
332 case SDHSTS:
333 s->status &= ~value;
334 bcm2835_sdhost_update_irq(s);
335 break;
336 case SDARG:
337 s->cmdarg = value;
338 break;
339 case SDEDM:
340 if ((value & 0xf) == 0xf) {
341 /* power down */
342 value &= ~0xf;
343 }
344 s->edm = value;
345 trace_bcm2835_sdhost_edm_change("guest register write", s->edm);
346 break;
347 case SDHCFG:
348 s->config = value;
349 bcm2835_sdhost_fifo_run(s);
350 break;
351 case SDVDD:
352 s->vdd = value;
353 break;
354 case SDDATA:
355 bcm2835_sdhost_fifo_push(s, value);
356 bcm2835_sdhost_fifo_run(s);
357 break;
358 case SDHBCT:
359 s->hbct = value;
360 break;
361 case SDHBLC:
362 s->hblc = value;
363 s->datacnt = s->hblc * s->hbct;
364 bcm2835_sdhost_fifo_run(s);
365 break;
366
367 default:
368 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %"HWADDR_PRIx"\n",
369 __func__, offset);
370 break;
371 }
372 }
373
374 static const MemoryRegionOps bcm2835_sdhost_ops = {
375 .read = bcm2835_sdhost_read,
376 .write = bcm2835_sdhost_write,
377 .endianness = DEVICE_NATIVE_ENDIAN,
378 };
379
380 static const VMStateDescription vmstate_bcm2835_sdhost = {
381 .name = TYPE_BCM2835_SDHOST,
382 .version_id = 1,
383 .minimum_version_id = 1,
384 .fields = (const VMStateField[]) {
385 VMSTATE_UINT32(cmd, BCM2835SDHostState),
386 VMSTATE_UINT32(cmdarg, BCM2835SDHostState),
387 VMSTATE_UINT32(status, BCM2835SDHostState),
388 VMSTATE_UINT32_ARRAY(rsp, BCM2835SDHostState, 4),
389 VMSTATE_UINT32(config, BCM2835SDHostState),
390 VMSTATE_UINT32(edm, BCM2835SDHostState),
391 VMSTATE_UINT32(vdd, BCM2835SDHostState),
392 VMSTATE_UINT32(hbct, BCM2835SDHostState),
393 VMSTATE_UINT32(hblc, BCM2835SDHostState),
394 VMSTATE_INT32(fifo_pos, BCM2835SDHostState),
395 VMSTATE_INT32(fifo_len, BCM2835SDHostState),
396 VMSTATE_UINT32_ARRAY(fifo, BCM2835SDHostState, BCM2835_SDHOST_FIFO_LEN),
397 VMSTATE_UINT32(datacnt, BCM2835SDHostState),
398 VMSTATE_END_OF_LIST()
399 }
400 };
401
bcm2835_sdhost_init(Object * obj)402 static void bcm2835_sdhost_init(Object *obj)
403 {
404 BCM2835SDHostState *s = BCM2835_SDHOST(obj);
405
406 qbus_init(&s->sdbus, sizeof(s->sdbus),
407 TYPE_BCM2835_SDHOST_BUS, DEVICE(s), "sd-bus");
408
409 memory_region_init_io(&s->iomem, obj, &bcm2835_sdhost_ops, s,
410 TYPE_BCM2835_SDHOST, 0x1000);
411 sysbus_init_mmio(SYS_BUS_DEVICE(s), &s->iomem);
412 sysbus_init_irq(SYS_BUS_DEVICE(s), &s->irq);
413 }
414
bcm2835_sdhost_reset(DeviceState * dev)415 static void bcm2835_sdhost_reset(DeviceState *dev)
416 {
417 BCM2835SDHostState *s = BCM2835_SDHOST(dev);
418
419 s->cmd = 0;
420 s->cmdarg = 0;
421 s->edm = 0x0000c60f;
422 trace_bcm2835_sdhost_edm_change("device reset", s->edm);
423 s->config = 0;
424 s->hbct = 0;
425 s->hblc = 0;
426 s->datacnt = 0;
427 s->fifo_pos = 0;
428 s->fifo_len = 0;
429 }
430
bcm2835_sdhost_class_init(ObjectClass * klass,void * data)431 static void bcm2835_sdhost_class_init(ObjectClass *klass, void *data)
432 {
433 DeviceClass *dc = DEVICE_CLASS(klass);
434
435 dc->reset = bcm2835_sdhost_reset;
436 dc->vmsd = &vmstate_bcm2835_sdhost;
437 }
438
439 static const TypeInfo bcm2835_sdhost_types[] = {
440 {
441 .name = TYPE_BCM2835_SDHOST,
442 .parent = TYPE_SYS_BUS_DEVICE,
443 .instance_size = sizeof(BCM2835SDHostState),
444 .class_init = bcm2835_sdhost_class_init,
445 .instance_init = bcm2835_sdhost_init,
446 },
447 {
448 .name = TYPE_BCM2835_SDHOST_BUS,
449 .parent = TYPE_SD_BUS,
450 .instance_size = sizeof(SDBus),
451 },
452 };
453
454 DEFINE_TYPES(bcm2835_sdhost_types)
455