1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * MDIO bus driver for the Xilinx Axi Ethernet device
4 *
5 * Copyright (c) 2009 Secret Lab Technologies, Ltd.
6 * Copyright (c) 2010 - 2011 Michal Simek <monstr@monstr.eu>
7 * Copyright (c) 2010 - 2011 PetaLogix
8 * Copyright (c) 2019 SED Systems, a division of Calian Ltd.
9 * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
10 */
11
12 #include <linux/clk.h>
13 #include <linux/of_address.h>
14 #include <linux/of_mdio.h>
15 #include <linux/jiffies.h>
16 #include <linux/iopoll.h>
17
18 #include "xilinx_axienet.h"
19
20 #define DEFAULT_MDIO_FREQ 2500000 /* 2.5 MHz */
21 #define DEFAULT_HOST_CLOCK 150000000 /* 150 MHz */
22
23 /* Wait till MDIO interface is ready to accept a new transaction.*/
axienet_mdio_wait_until_ready(struct axienet_local * lp)24 static int axienet_mdio_wait_until_ready(struct axienet_local *lp)
25 {
26 u32 val;
27
28 return readx_poll_timeout(axinet_ior_read_mcr, lp,
29 val, val & XAE_MDIO_MCR_READY_MASK,
30 1, 20000);
31 }
32
33 /* Enable the MDIO MDC. Called prior to a read/write operation */
axienet_mdio_mdc_enable(struct axienet_local * lp)34 static void axienet_mdio_mdc_enable(struct axienet_local *lp)
35 {
36 axienet_iow(lp, XAE_MDIO_MC_OFFSET,
37 ((u32)lp->mii_clk_div | XAE_MDIO_MC_MDIOEN_MASK));
38 }
39
40 /* Disable the MDIO MDC. Called after a read/write operation*/
axienet_mdio_mdc_disable(struct axienet_local * lp)41 static void axienet_mdio_mdc_disable(struct axienet_local *lp)
42 {
43 u32 mc_reg;
44
45 mc_reg = axienet_ior(lp, XAE_MDIO_MC_OFFSET);
46 axienet_iow(lp, XAE_MDIO_MC_OFFSET,
47 (mc_reg & ~XAE_MDIO_MC_MDIOEN_MASK));
48 }
49
50 /**
51 * axienet_mdio_read - MDIO interface read function
52 * @bus: Pointer to mii bus structure
53 * @phy_id: Address of the PHY device
54 * @reg: PHY register to read
55 *
56 * Return: The register contents on success, -ETIMEDOUT on a timeout
57 *
58 * Reads the contents of the requested register from the requested PHY
59 * address by first writing the details into MCR register. After a while
60 * the register MRD is read to obtain the PHY register content.
61 */
axienet_mdio_read(struct mii_bus * bus,int phy_id,int reg)62 static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg)
63 {
64 u32 rc;
65 int ret;
66 struct axienet_local *lp = bus->priv;
67
68 axienet_mdio_mdc_enable(lp);
69
70 ret = axienet_mdio_wait_until_ready(lp);
71 if (ret < 0) {
72 axienet_mdio_mdc_disable(lp);
73 return ret;
74 }
75
76 axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
77 (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
78 XAE_MDIO_MCR_PHYAD_MASK) |
79 ((reg << XAE_MDIO_MCR_REGAD_SHIFT) &
80 XAE_MDIO_MCR_REGAD_MASK) |
81 XAE_MDIO_MCR_INITIATE_MASK |
82 XAE_MDIO_MCR_OP_READ_MASK));
83
84 ret = axienet_mdio_wait_until_ready(lp);
85 if (ret < 0) {
86 axienet_mdio_mdc_disable(lp);
87 return ret;
88 }
89
90 rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF;
91
92 dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n",
93 phy_id, reg, rc);
94
95 axienet_mdio_mdc_disable(lp);
96 return rc;
97 }
98
99 /**
100 * axienet_mdio_write - MDIO interface write function
101 * @bus: Pointer to mii bus structure
102 * @phy_id: Address of the PHY device
103 * @reg: PHY register to write to
104 * @val: Value to be written into the register
105 *
106 * Return: 0 on success, -ETIMEDOUT on a timeout
107 *
108 * Writes the value to the requested register by first writing the value
109 * into MWD register. The MCR register is then appropriately setup
110 * to finish the write operation.
111 */
axienet_mdio_write(struct mii_bus * bus,int phy_id,int reg,u16 val)112 static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
113 u16 val)
114 {
115 int ret;
116 struct axienet_local *lp = bus->priv;
117
118 dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n",
119 phy_id, reg, val);
120
121 axienet_mdio_mdc_enable(lp);
122
123 ret = axienet_mdio_wait_until_ready(lp);
124 if (ret < 0) {
125 axienet_mdio_mdc_disable(lp);
126 return ret;
127 }
128
129 axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32)val);
130 axienet_iow(lp, XAE_MDIO_MCR_OFFSET,
131 (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) &
132 XAE_MDIO_MCR_PHYAD_MASK) |
133 ((reg << XAE_MDIO_MCR_REGAD_SHIFT) &
134 XAE_MDIO_MCR_REGAD_MASK) |
135 XAE_MDIO_MCR_INITIATE_MASK |
136 XAE_MDIO_MCR_OP_WRITE_MASK));
137
138 ret = axienet_mdio_wait_until_ready(lp);
139 if (ret < 0) {
140 axienet_mdio_mdc_disable(lp);
141 return ret;
142 }
143 axienet_mdio_mdc_disable(lp);
144 return 0;
145 }
146
147 /**
148 * axienet_mdio_enable - MDIO hardware setup function
149 * @lp: Pointer to axienet local data structure.
150 * @np: Pointer to mdio device tree node.
151 *
152 * Return: 0 on success, -ETIMEDOUT on a timeout, -EOVERFLOW on a clock
153 * divisor overflow.
154 *
155 * Sets up the MDIO interface by initializing the MDIO clock and enabling the
156 * MDIO interface in hardware.
157 **/
axienet_mdio_enable(struct axienet_local * lp,struct device_node * np)158 static int axienet_mdio_enable(struct axienet_local *lp, struct device_node *np)
159 {
160 u32 mdio_freq = DEFAULT_MDIO_FREQ;
161 u32 host_clock;
162 u32 clk_div;
163 int ret;
164
165 lp->mii_clk_div = 0;
166
167 if (lp->axi_clk) {
168 host_clock = clk_get_rate(lp->axi_clk);
169 } else {
170 struct device_node *np1;
171
172 /* Legacy fallback: detect CPU clock frequency and use as AXI
173 * bus clock frequency. This only works on certain platforms.
174 */
175 np1 = of_find_node_by_name(NULL, "cpu");
176 if (!np1) {
177 netdev_warn(lp->ndev, "Could not find CPU device node.\n");
178 host_clock = DEFAULT_HOST_CLOCK;
179 } else {
180 int ret = of_property_read_u32(np1, "clock-frequency",
181 &host_clock);
182 if (ret) {
183 netdev_warn(lp->ndev, "CPU clock-frequency property not found.\n");
184 host_clock = DEFAULT_HOST_CLOCK;
185 }
186 of_node_put(np1);
187 }
188 netdev_info(lp->ndev, "Setting assumed host clock to %u\n",
189 host_clock);
190 }
191
192 if (np)
193 of_property_read_u32(np, "clock-frequency", &mdio_freq);
194 if (mdio_freq != DEFAULT_MDIO_FREQ)
195 netdev_info(lp->ndev, "Setting non-standard mdio bus frequency to %u Hz\n",
196 mdio_freq);
197
198 /* clk_div can be calculated by deriving it from the equation:
199 * fMDIO = fHOST / ((1 + clk_div) * 2)
200 *
201 * Where fMDIO <= 2500000, so we get:
202 * fHOST / ((1 + clk_div) * 2) <= 2500000
203 *
204 * Then we get:
205 * 1 / ((1 + clk_div) * 2) <= (2500000 / fHOST)
206 *
207 * Then we get:
208 * 1 / (1 + clk_div) <= ((2500000 * 2) / fHOST)
209 *
210 * Then we get:
211 * 1 / (1 + clk_div) <= (5000000 / fHOST)
212 *
213 * So:
214 * (1 + clk_div) >= (fHOST / 5000000)
215 *
216 * And finally:
217 * clk_div >= (fHOST / 5000000) - 1
218 *
219 * fHOST can be read from the flattened device tree as property
220 * "clock-frequency" from the CPU
221 */
222
223 clk_div = (host_clock / (mdio_freq * 2)) - 1;
224 /* If there is any remainder from the division of
225 * fHOST / (mdio_freq * 2), then we need to add
226 * 1 to the clock divisor or we will surely be
227 * above the requested frequency
228 */
229 if (host_clock % (mdio_freq * 2))
230 clk_div++;
231
232 /* Check for overflow of mii_clk_div */
233 if (clk_div & ~XAE_MDIO_MC_CLOCK_DIVIDE_MAX) {
234 netdev_warn(lp->ndev, "MDIO clock divisor overflow\n");
235 return -EOVERFLOW;
236 }
237 lp->mii_clk_div = (u8)clk_div;
238
239 netdev_dbg(lp->ndev,
240 "Setting MDIO clock divisor to %u/%u Hz host clock.\n",
241 lp->mii_clk_div, host_clock);
242
243 axienet_mdio_mdc_enable(lp);
244
245 ret = axienet_mdio_wait_until_ready(lp);
246 if (ret)
247 axienet_mdio_mdc_disable(lp);
248
249 return ret;
250 }
251
252 /**
253 * axienet_mdio_setup - MDIO setup function
254 * @lp: Pointer to axienet local data structure.
255 *
256 * Return: 0 on success, -ETIMEDOUT on a timeout, -EOVERFLOW on a clock
257 * divisor overflow, -ENOMEM when mdiobus_alloc (to allocate
258 * memory for mii bus structure) fails.
259 *
260 * Sets up the MDIO interface by initializing the MDIO clock.
261 * Register the MDIO interface.
262 **/
axienet_mdio_setup(struct axienet_local * lp)263 int axienet_mdio_setup(struct axienet_local *lp)
264 {
265 struct device_node *mdio_node;
266 struct mii_bus *bus;
267 int ret;
268
269 bus = mdiobus_alloc();
270 if (!bus)
271 return -ENOMEM;
272
273 snprintf(bus->id, MII_BUS_ID_SIZE, "axienet-%.8llx",
274 (unsigned long long)lp->regs_start);
275
276 bus->priv = lp;
277 bus->name = "Xilinx Axi Ethernet MDIO";
278 bus->read = axienet_mdio_read;
279 bus->write = axienet_mdio_write;
280 bus->parent = lp->dev;
281 lp->mii_bus = bus;
282
283 mdio_node = of_get_child_by_name(lp->dev->of_node, "mdio");
284 ret = axienet_mdio_enable(lp, mdio_node);
285 if (ret < 0)
286 goto unregister;
287 ret = of_mdiobus_register(bus, mdio_node);
288 if (ret)
289 goto unregister_mdio_enabled;
290 of_node_put(mdio_node);
291 axienet_mdio_mdc_disable(lp);
292 return 0;
293
294 unregister_mdio_enabled:
295 axienet_mdio_mdc_disable(lp);
296 unregister:
297 of_node_put(mdio_node);
298 mdiobus_free(bus);
299 lp->mii_bus = NULL;
300 return ret;
301 }
302
303 /**
304 * axienet_mdio_teardown - MDIO remove function
305 * @lp: Pointer to axienet local data structure.
306 *
307 * Unregisters the MDIO and frees any associate memory for mii bus.
308 */
axienet_mdio_teardown(struct axienet_local * lp)309 void axienet_mdio_teardown(struct axienet_local *lp)
310 {
311 mdiobus_unregister(lp->mii_bus);
312 mdiobus_free(lp->mii_bus);
313 lp->mii_bus = NULL;
314 }
315