xref: /openbmc/linux/drivers/gpio/gpio-ich.c (revision 56b16a9a)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver
4  *
5  * Copyright (C) 2010 Extreme Engineering Solutions.
6  */
7 
8 #include <linux/bitops.h>
9 #include <linux/gpio/driver.h>
10 #include <linux/ioport.h>
11 #include <linux/mfd/lpc_ich.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
14 
15 #define DRV_NAME "gpio_ich"
16 
17 /*
18  * GPIO register offsets in GPIO I/O space.
19  * Each chunk of 32 GPIOs is manipulated via its own USE_SELx, IO_SELx, and
20  * LVLx registers.  Logic in the read/write functions takes a register and
21  * an absolute bit number and determines the proper register offset and bit
22  * number in that register.  For example, to read the value of GPIO bit 50
23  * the code would access offset ichx_regs[2(=GPIO_LVL)][1(=50/32)],
24  * bit 18 (50%32).
25  */
26 enum GPIO_REG {
27 	GPIO_USE_SEL = 0,
28 	GPIO_IO_SEL,
29 	GPIO_LVL,
30 	GPO_BLINK
31 };
32 
33 static const u8 ichx_regs[4][3] = {
34 	{0x00, 0x30, 0x40},	/* USE_SEL[1-3] offsets */
35 	{0x04, 0x34, 0x44},	/* IO_SEL[1-3] offsets */
36 	{0x0c, 0x38, 0x48},	/* LVL[1-3] offsets */
37 	{0x18, 0x18, 0x18},	/* BLINK offset */
38 };
39 
40 static const u8 ichx_reglen[3] = {
41 	0x30, 0x10, 0x10,
42 };
43 
44 static const u8 avoton_regs[4][3] = {
45 	{0x00, 0x80, 0x00},
46 	{0x04, 0x84, 0x00},
47 	{0x08, 0x88, 0x00},
48 };
49 
50 static const u8 avoton_reglen[3] = {
51 	0x10, 0x10, 0x00,
52 };
53 
54 #define ICHX_WRITE(val, reg, base_res)	outl(val, (reg) + (base_res)->start)
55 #define ICHX_READ(reg, base_res)	inl((reg) + (base_res)->start)
56 
57 struct ichx_desc {
58 	/* Max GPIO pins the chipset can have */
59 	uint ngpio;
60 
61 	/* chipset registers */
62 	const u8 (*regs)[3];
63 	const u8 *reglen;
64 
65 	/* GPO_BLINK is available on this chipset */
66 	bool have_blink;
67 
68 	/* Whether the chipset has GPIO in GPE0_STS in the PM IO region */
69 	bool uses_gpe0;
70 
71 	/* USE_SEL is bogus on some chipsets, eg 3100 */
72 	u32 use_sel_ignore[3];
73 
74 	/* Some chipsets have quirks, let these use their own request/get */
75 	int (*request)(struct gpio_chip *chip, unsigned int offset);
76 	int (*get)(struct gpio_chip *chip, unsigned int offset);
77 
78 	/*
79 	 * Some chipsets don't let reading output values on GPIO_LVL register
80 	 * this option allows driver caching written output values
81 	 */
82 	bool use_outlvl_cache;
83 };
84 
85 static struct {
86 	spinlock_t lock;
87 	struct device *dev;
88 	struct gpio_chip chip;
89 	struct resource *gpio_base;	/* GPIO IO base */
90 	struct resource *pm_base;	/* Power Management IO base */
91 	struct ichx_desc *desc;	/* Pointer to chipset-specific description */
92 	u32 orig_gpio_ctrl;	/* Orig CTRL value, used to restore on exit */
93 	u8 use_gpio;		/* Which GPIO groups are usable */
94 	int outlvl_cache[3];	/* cached output values */
95 } ichx_priv;
96 
97 static int modparam_gpiobase = -1;	/* dynamic */
98 module_param_named(gpiobase, modparam_gpiobase, int, 0444);
99 MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, which is the default.");
100 
ichx_write_bit(int reg,unsigned int nr,int val,int verify)101 static int ichx_write_bit(int reg, unsigned int nr, int val, int verify)
102 {
103 	unsigned long flags;
104 	u32 data, tmp;
105 	int reg_nr = nr / 32;
106 	int bit = nr & 0x1f;
107 
108 	spin_lock_irqsave(&ichx_priv.lock, flags);
109 
110 	if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
111 		data = ichx_priv.outlvl_cache[reg_nr];
112 	else
113 		data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
114 				 ichx_priv.gpio_base);
115 
116 	if (val)
117 		data |= BIT(bit);
118 	else
119 		data &= ~BIT(bit);
120 	ICHX_WRITE(data, ichx_priv.desc->regs[reg][reg_nr],
121 			 ichx_priv.gpio_base);
122 	if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
123 		ichx_priv.outlvl_cache[reg_nr] = data;
124 
125 	tmp = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
126 			ichx_priv.gpio_base);
127 
128 	spin_unlock_irqrestore(&ichx_priv.lock, flags);
129 
130 	return (verify && data != tmp) ? -EPERM : 0;
131 }
132 
ichx_read_bit(int reg,unsigned int nr)133 static int ichx_read_bit(int reg, unsigned int nr)
134 {
135 	unsigned long flags;
136 	u32 data;
137 	int reg_nr = nr / 32;
138 	int bit = nr & 0x1f;
139 
140 	spin_lock_irqsave(&ichx_priv.lock, flags);
141 
142 	data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr],
143 			 ichx_priv.gpio_base);
144 
145 	if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache)
146 		data = ichx_priv.outlvl_cache[reg_nr] | data;
147 
148 	spin_unlock_irqrestore(&ichx_priv.lock, flags);
149 
150 	return !!(data & BIT(bit));
151 }
152 
ichx_gpio_check_available(struct gpio_chip * gpio,unsigned int nr)153 static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned int nr)
154 {
155 	return !!(ichx_priv.use_gpio & BIT(nr / 32));
156 }
157 
ichx_gpio_get_direction(struct gpio_chip * gpio,unsigned int nr)158 static int ichx_gpio_get_direction(struct gpio_chip *gpio, unsigned int nr)
159 {
160 	if (ichx_read_bit(GPIO_IO_SEL, nr))
161 		return GPIO_LINE_DIRECTION_IN;
162 
163 	return GPIO_LINE_DIRECTION_OUT;
164 }
165 
ichx_gpio_direction_input(struct gpio_chip * gpio,unsigned int nr)166 static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned int nr)
167 {
168 	/*
169 	 * Try setting pin as an input and verify it worked since many pins
170 	 * are output-only.
171 	 */
172 	return ichx_write_bit(GPIO_IO_SEL, nr, 1, 1);
173 }
174 
ichx_gpio_direction_output(struct gpio_chip * gpio,unsigned int nr,int val)175 static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned int nr,
176 					int val)
177 {
178 	/* Disable blink hardware which is available for GPIOs from 0 to 31. */
179 	if (nr < 32 && ichx_priv.desc->have_blink)
180 		ichx_write_bit(GPO_BLINK, nr, 0, 0);
181 
182 	/* Set GPIO output value. */
183 	ichx_write_bit(GPIO_LVL, nr, val, 0);
184 
185 	/*
186 	 * Try setting pin as an output and verify it worked since many pins
187 	 * are input-only.
188 	 */
189 	return ichx_write_bit(GPIO_IO_SEL, nr, 0, 1);
190 }
191 
ichx_gpio_get(struct gpio_chip * chip,unsigned int nr)192 static int ichx_gpio_get(struct gpio_chip *chip, unsigned int nr)
193 {
194 	return ichx_read_bit(GPIO_LVL, nr);
195 }
196 
ich6_gpio_get(struct gpio_chip * chip,unsigned int nr)197 static int ich6_gpio_get(struct gpio_chip *chip, unsigned int nr)
198 {
199 	unsigned long flags;
200 	u32 data;
201 
202 	/*
203 	 * GPI 0 - 15 need to be read from the power management registers on
204 	 * a ICH6/3100 bridge.
205 	 */
206 	if (nr < 16) {
207 		if (!ichx_priv.pm_base)
208 			return -ENXIO;
209 
210 		spin_lock_irqsave(&ichx_priv.lock, flags);
211 
212 		/* GPI 0 - 15 are latched, write 1 to clear*/
213 		ICHX_WRITE(BIT(16 + nr), 0, ichx_priv.pm_base);
214 		data = ICHX_READ(0, ichx_priv.pm_base);
215 
216 		spin_unlock_irqrestore(&ichx_priv.lock, flags);
217 
218 		return !!((data >> 16) & BIT(nr));
219 	} else {
220 		return ichx_gpio_get(chip, nr);
221 	}
222 }
223 
ichx_gpio_request(struct gpio_chip * chip,unsigned int nr)224 static int ichx_gpio_request(struct gpio_chip *chip, unsigned int nr)
225 {
226 	if (!ichx_gpio_check_available(chip, nr))
227 		return -ENXIO;
228 
229 	/*
230 	 * Note we assume the BIOS properly set a bridge's USE value.  Some
231 	 * chips (eg Intel 3100) have bogus USE values though, so first see if
232 	 * the chipset's USE value can be trusted for this specific bit.
233 	 * If it can't be trusted, assume that the pin can be used as a GPIO.
234 	 */
235 	if (ichx_priv.desc->use_sel_ignore[nr / 32] & BIT(nr & 0x1f))
236 		return 0;
237 
238 	return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV;
239 }
240 
ich6_gpio_request(struct gpio_chip * chip,unsigned int nr)241 static int ich6_gpio_request(struct gpio_chip *chip, unsigned int nr)
242 {
243 	/*
244 	 * Fixups for bits 16 and 17 are necessary on the Intel ICH6/3100
245 	 * bridge as they are controlled by USE register bits 0 and 1.  See
246 	 * "Table 704 GPIO_USE_SEL1 register" in the i3100 datasheet for
247 	 * additional info.
248 	 */
249 	if (nr == 16 || nr == 17)
250 		nr -= 16;
251 
252 	return ichx_gpio_request(chip, nr);
253 }
254 
ichx_gpio_set(struct gpio_chip * chip,unsigned int nr,int val)255 static void ichx_gpio_set(struct gpio_chip *chip, unsigned int nr, int val)
256 {
257 	ichx_write_bit(GPIO_LVL, nr, val, 0);
258 }
259 
ichx_gpiolib_setup(struct gpio_chip * chip)260 static void ichx_gpiolib_setup(struct gpio_chip *chip)
261 {
262 	chip->owner = THIS_MODULE;
263 	chip->label = DRV_NAME;
264 	chip->parent = ichx_priv.dev;
265 
266 	/* Allow chip-specific overrides of request()/get() */
267 	chip->request = ichx_priv.desc->request ?
268 		ichx_priv.desc->request : ichx_gpio_request;
269 	chip->get = ichx_priv.desc->get ?
270 		ichx_priv.desc->get : ichx_gpio_get;
271 
272 	chip->set = ichx_gpio_set;
273 	chip->get_direction = ichx_gpio_get_direction;
274 	chip->direction_input = ichx_gpio_direction_input;
275 	chip->direction_output = ichx_gpio_direction_output;
276 	chip->base = modparam_gpiobase;
277 	chip->ngpio = ichx_priv.desc->ngpio;
278 	chip->can_sleep = false;
279 	chip->dbg_show = NULL;
280 }
281 
282 /* ICH6-based, 631xesb-based */
283 static struct ichx_desc ich6_desc = {
284 	/* Bridges using the ICH6 controller need fixups for GPIO 0 - 17 */
285 	.request = ich6_gpio_request,
286 	.get = ich6_gpio_get,
287 
288 	/* GPIO 0-15 are read in the GPE0_STS PM register */
289 	.uses_gpe0 = true,
290 
291 	.ngpio = 50,
292 	.have_blink = true,
293 	.regs = ichx_regs,
294 	.reglen = ichx_reglen,
295 };
296 
297 /* Intel 3100 */
298 static struct ichx_desc i3100_desc = {
299 	/*
300 	 * Bits 16,17, 20 of USE_SEL and bit 16 of USE_SEL2 always read 0 on
301 	 * the Intel 3100.  See "Table 712. GPIO Summary Table" of 3100
302 	 * Datasheet for more info.
303 	 */
304 	.use_sel_ignore = {0x00130000, 0x00010000, 0x0},
305 
306 	/* The 3100 needs fixups for GPIO 0 - 17 */
307 	.request = ich6_gpio_request,
308 	.get = ich6_gpio_get,
309 
310 	/* GPIO 0-15 are read in the GPE0_STS PM register */
311 	.uses_gpe0 = true,
312 
313 	.ngpio = 50,
314 	.regs = ichx_regs,
315 	.reglen = ichx_reglen,
316 };
317 
318 /* ICH7 and ICH8-based */
319 static struct ichx_desc ich7_desc = {
320 	.ngpio = 50,
321 	.have_blink = true,
322 	.regs = ichx_regs,
323 	.reglen = ichx_reglen,
324 };
325 
326 /* ICH9-based */
327 static struct ichx_desc ich9_desc = {
328 	.ngpio = 61,
329 	.have_blink = true,
330 	.regs = ichx_regs,
331 	.reglen = ichx_reglen,
332 };
333 
334 /* ICH10-based - Consumer/corporate versions have different amount of GPIO */
335 static struct ichx_desc ich10_cons_desc = {
336 	.ngpio = 61,
337 	.have_blink = true,
338 	.regs = ichx_regs,
339 	.reglen = ichx_reglen,
340 };
341 static struct ichx_desc ich10_corp_desc = {
342 	.ngpio = 72,
343 	.have_blink = true,
344 	.regs = ichx_regs,
345 	.reglen = ichx_reglen,
346 };
347 
348 /* Intel 5 series, 6 series, 3400 series, and C200 series */
349 static struct ichx_desc intel5_desc = {
350 	.ngpio = 76,
351 	.regs = ichx_regs,
352 	.reglen = ichx_reglen,
353 };
354 
355 /* Avoton */
356 static struct ichx_desc avoton_desc = {
357 	/* Avoton has only 59 GPIOs, but we assume the first set of register
358 	 * (Core) has 32 instead of 31 to keep gpio-ich compliance
359 	 */
360 	.ngpio = 60,
361 	.regs = avoton_regs,
362 	.reglen = avoton_reglen,
363 	.use_outlvl_cache = true,
364 };
365 
ichx_gpio_request_regions(struct device * dev,struct resource * res_base,const char * name,u8 use_gpio)366 static int ichx_gpio_request_regions(struct device *dev,
367 	struct resource *res_base, const char *name, u8 use_gpio)
368 {
369 	int i;
370 
371 	if (!res_base || !res_base->start || !res_base->end)
372 		return -ENODEV;
373 
374 	for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) {
375 		if (!(use_gpio & BIT(i)))
376 			continue;
377 		if (!devm_request_region(dev,
378 				res_base->start + ichx_priv.desc->regs[0][i],
379 				ichx_priv.desc->reglen[i], name))
380 			return -EBUSY;
381 	}
382 	return 0;
383 }
384 
ichx_gpio_probe(struct platform_device * pdev)385 static int ichx_gpio_probe(struct platform_device *pdev)
386 {
387 	struct device *dev = &pdev->dev;
388 	struct lpc_ich_info *ich_info = dev_get_platdata(dev);
389 	struct resource *res_base, *res_pm;
390 	int err;
391 
392 	if (!ich_info)
393 		return -ENODEV;
394 
395 	switch (ich_info->gpio_version) {
396 	case ICH_I3100_GPIO:
397 		ichx_priv.desc = &i3100_desc;
398 		break;
399 	case ICH_V5_GPIO:
400 		ichx_priv.desc = &intel5_desc;
401 		break;
402 	case ICH_V6_GPIO:
403 		ichx_priv.desc = &ich6_desc;
404 		break;
405 	case ICH_V7_GPIO:
406 		ichx_priv.desc = &ich7_desc;
407 		break;
408 	case ICH_V9_GPIO:
409 		ichx_priv.desc = &ich9_desc;
410 		break;
411 	case ICH_V10CORP_GPIO:
412 		ichx_priv.desc = &ich10_corp_desc;
413 		break;
414 	case ICH_V10CONS_GPIO:
415 		ichx_priv.desc = &ich10_cons_desc;
416 		break;
417 	case AVOTON_GPIO:
418 		ichx_priv.desc = &avoton_desc;
419 		break;
420 	default:
421 		return -ENODEV;
422 	}
423 
424 	ichx_priv.dev = dev;
425 	spin_lock_init(&ichx_priv.lock);
426 
427 	res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO);
428 	err = ichx_gpio_request_regions(dev, res_base, pdev->name,
429 					ich_info->use_gpio);
430 	if (err)
431 		return err;
432 
433 	ichx_priv.gpio_base = res_base;
434 	ichx_priv.use_gpio = ich_info->use_gpio;
435 
436 	/*
437 	 * If necessary, determine the I/O address of ACPI/power management
438 	 * registers which are needed to read the GPE0 register for GPI pins
439 	 * 0 - 15 on some chipsets.
440 	 */
441 	if (!ichx_priv.desc->uses_gpe0)
442 		goto init;
443 
444 	res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0);
445 	if (!res_pm) {
446 		dev_warn(dev, "ACPI BAR is unavailable, GPI 0 - 15 unavailable\n");
447 		goto init;
448 	}
449 
450 	if (!devm_request_region(dev, res_pm->start, resource_size(res_pm),
451 				 pdev->name)) {
452 		dev_warn(dev, "ACPI BAR is busy, GPI 0 - 15 unavailable\n");
453 		goto init;
454 	}
455 
456 	ichx_priv.pm_base = res_pm;
457 
458 init:
459 	ichx_gpiolib_setup(&ichx_priv.chip);
460 	err = devm_gpiochip_add_data(dev, &ichx_priv.chip, NULL);
461 	if (err) {
462 		dev_err(dev, "Failed to register GPIOs\n");
463 		return err;
464 	}
465 
466 	dev_info(dev, "GPIO from %d to %d\n", ichx_priv.chip.base,
467 		 ichx_priv.chip.base + ichx_priv.chip.ngpio - 1);
468 
469 	return 0;
470 }
471 
472 static struct platform_driver ichx_gpio_driver = {
473 	.driver		= {
474 		.name	= DRV_NAME,
475 	},
476 	.probe		= ichx_gpio_probe,
477 };
478 
479 module_platform_driver(ichx_gpio_driver);
480 
481 MODULE_AUTHOR("Peter Tyser <ptyser@xes-inc.com>");
482 MODULE_DESCRIPTION("GPIO interface for Intel ICH series");
483 MODULE_LICENSE("GPL");
484 MODULE_ALIAS("platform:"DRV_NAME);
485