1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (c) 2008-2009 Atheros Communications Inc.
4 */
5
6 #include <linux/module.h>
7 #include <linux/kernel.h>
8 #include <linux/init.h>
9 #include <linux/slab.h>
10 #include <linux/types.h>
11 #include <linux/errno.h>
12 #include <linux/firmware.h>
13 #include <linux/usb.h>
14 #include <asm/unaligned.h>
15 #include <net/bluetooth/bluetooth.h>
16
17 #define VERSION "1.0"
18 #define ATH3K_FIRMWARE "ath3k-1.fw"
19
20 #define ATH3K_DNLOAD 0x01
21 #define ATH3K_GETSTATE 0x05
22 #define ATH3K_SET_NORMAL_MODE 0x07
23 #define ATH3K_GETVERSION 0x09
24 #define USB_REG_SWITCH_VID_PID 0x0a
25
26 #define ATH3K_MODE_MASK 0x3F
27 #define ATH3K_NORMAL_MODE 0x0E
28
29 #define ATH3K_PATCH_UPDATE 0x80
30 #define ATH3K_SYSCFG_UPDATE 0x40
31
32 #define ATH3K_XTAL_FREQ_26M 0x00
33 #define ATH3K_XTAL_FREQ_40M 0x01
34 #define ATH3K_XTAL_FREQ_19P2 0x02
35 #define ATH3K_NAME_LEN 0xFF
36
37 struct ath3k_version {
38 __le32 rom_version;
39 __le32 build_version;
40 __le32 ram_version;
41 __u8 ref_clock;
42 __u8 reserved[7];
43 } __packed;
44
45 static const struct usb_device_id ath3k_table[] = {
46 /* Atheros AR3011 */
47 { USB_DEVICE(0x0CF3, 0x3000) },
48
49 /* Atheros AR3011 with sflash firmware*/
50 { USB_DEVICE(0x0489, 0xE027) },
51 { USB_DEVICE(0x0489, 0xE03D) },
52 { USB_DEVICE(0x04F2, 0xAFF1) },
53 { USB_DEVICE(0x0930, 0x0215) },
54 { USB_DEVICE(0x0CF3, 0x3002) },
55 { USB_DEVICE(0x0CF3, 0xE019) },
56 { USB_DEVICE(0x13d3, 0x3304) },
57
58 /* Atheros AR9285 Malbec with sflash firmware */
59 { USB_DEVICE(0x03F0, 0x311D) },
60
61 /* Atheros AR3012 with sflash firmware*/
62 { USB_DEVICE(0x0489, 0xe04d) },
63 { USB_DEVICE(0x0489, 0xe04e) },
64 { USB_DEVICE(0x0489, 0xe057) },
65 { USB_DEVICE(0x0489, 0xe056) },
66 { USB_DEVICE(0x0489, 0xe05f) },
67 { USB_DEVICE(0x0489, 0xe076) },
68 { USB_DEVICE(0x0489, 0xe078) },
69 { USB_DEVICE(0x0489, 0xe095) },
70 { USB_DEVICE(0x04c5, 0x1330) },
71 { USB_DEVICE(0x04CA, 0x3004) },
72 { USB_DEVICE(0x04CA, 0x3005) },
73 { USB_DEVICE(0x04CA, 0x3006) },
74 { USB_DEVICE(0x04CA, 0x3007) },
75 { USB_DEVICE(0x04CA, 0x3008) },
76 { USB_DEVICE(0x04CA, 0x300b) },
77 { USB_DEVICE(0x04CA, 0x300d) },
78 { USB_DEVICE(0x04CA, 0x300f) },
79 { USB_DEVICE(0x04CA, 0x3010) },
80 { USB_DEVICE(0x04CA, 0x3014) },
81 { USB_DEVICE(0x04CA, 0x3018) },
82 { USB_DEVICE(0x0930, 0x0219) },
83 { USB_DEVICE(0x0930, 0x021c) },
84 { USB_DEVICE(0x0930, 0x0220) },
85 { USB_DEVICE(0x0930, 0x0227) },
86 { USB_DEVICE(0x0b05, 0x17d0) },
87 { USB_DEVICE(0x0CF3, 0x0036) },
88 { USB_DEVICE(0x0CF3, 0x3004) },
89 { USB_DEVICE(0x0CF3, 0x3008) },
90 { USB_DEVICE(0x0CF3, 0x311D) },
91 { USB_DEVICE(0x0CF3, 0x311E) },
92 { USB_DEVICE(0x0CF3, 0x311F) },
93 { USB_DEVICE(0x0cf3, 0x3121) },
94 { USB_DEVICE(0x0CF3, 0x817a) },
95 { USB_DEVICE(0x0CF3, 0x817b) },
96 { USB_DEVICE(0x0cf3, 0xe003) },
97 { USB_DEVICE(0x0CF3, 0xE004) },
98 { USB_DEVICE(0x0CF3, 0xE005) },
99 { USB_DEVICE(0x0CF3, 0xE006) },
100 { USB_DEVICE(0x13d3, 0x3362) },
101 { USB_DEVICE(0x13d3, 0x3375) },
102 { USB_DEVICE(0x13d3, 0x3393) },
103 { USB_DEVICE(0x13d3, 0x3395) },
104 { USB_DEVICE(0x13d3, 0x3402) },
105 { USB_DEVICE(0x13d3, 0x3408) },
106 { USB_DEVICE(0x13d3, 0x3423) },
107 { USB_DEVICE(0x13d3, 0x3432) },
108 { USB_DEVICE(0x13d3, 0x3472) },
109 { USB_DEVICE(0x13d3, 0x3474) },
110 { USB_DEVICE(0x13d3, 0x3487) },
111 { USB_DEVICE(0x13d3, 0x3490) },
112
113 /* Atheros AR5BBU12 with sflash firmware */
114 { USB_DEVICE(0x0489, 0xE02C) },
115
116 /* Atheros AR5BBU22 with sflash firmware */
117 { USB_DEVICE(0x0489, 0xE036) },
118 { USB_DEVICE(0x0489, 0xE03C) },
119
120 { } /* Terminating entry */
121 };
122
123 MODULE_DEVICE_TABLE(usb, ath3k_table);
124
125 #define BTUSB_ATH3012 0x80
126 /* This table is to load patch and sysconfig files
127 * for AR3012
128 */
129 static const struct usb_device_id ath3k_blist_tbl[] = {
130 /* Atheros AR3012 with sflash firmware*/
131 { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
132 { USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
133 { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
134 { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
135 { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
136 { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
137 { USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
138 { USB_DEVICE(0x0489, 0xe095), .driver_info = BTUSB_ATH3012 },
139 { USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
140 { USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
141 { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
142 { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
143 { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
144 { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
145 { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
146 { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
147 { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
148 { USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
149 { USB_DEVICE(0x04ca, 0x3014), .driver_info = BTUSB_ATH3012 },
150 { USB_DEVICE(0x04ca, 0x3018), .driver_info = BTUSB_ATH3012 },
151 { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
152 { USB_DEVICE(0x0930, 0x021c), .driver_info = BTUSB_ATH3012 },
153 { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
154 { USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
155 { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
156 { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 },
157 { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
158 { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
159 { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
160 { USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 },
161 { USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 },
162 { USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
163 { USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
164 { USB_DEVICE(0x0CF3, 0x817b), .driver_info = BTUSB_ATH3012 },
165 { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
166 { USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
167 { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
168 { USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
169 { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
170 { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
171 { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
172 { USB_DEVICE(0x13d3, 0x3395), .driver_info = BTUSB_ATH3012 },
173 { USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
174 { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
175 { USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
176 { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
177 { USB_DEVICE(0x13d3, 0x3472), .driver_info = BTUSB_ATH3012 },
178 { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
179 { USB_DEVICE(0x13d3, 0x3487), .driver_info = BTUSB_ATH3012 },
180 { USB_DEVICE(0x13d3, 0x3490), .driver_info = BTUSB_ATH3012 },
181
182 /* Atheros AR5BBU22 with sflash firmware */
183 { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
184 { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
185
186 { } /* Terminating entry */
187 };
188
ath3k_log_failed_loading(int err,int len,int size,int count)189 static inline void ath3k_log_failed_loading(int err, int len, int size,
190 int count)
191 {
192 BT_ERR("Firmware loading err = %d, len = %d, size = %d, count = %d",
193 err, len, size, count);
194 }
195
196 #define USB_REQ_DFU_DNLOAD 1
197 #define BULK_SIZE 4096
198 #define FW_HDR_SIZE 20
199 #define TIMEGAP_USEC_MIN 50
200 #define TIMEGAP_USEC_MAX 100
201
ath3k_load_firmware(struct usb_device * udev,const struct firmware * firmware)202 static int ath3k_load_firmware(struct usb_device *udev,
203 const struct firmware *firmware)
204 {
205 u8 *send_buf;
206 int len = 0;
207 int err, pipe, size, sent = 0;
208 int count = firmware->size;
209
210 BT_DBG("udev %p", udev);
211
212 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
213 if (!send_buf) {
214 BT_ERR("Can't allocate memory chunk for firmware");
215 return -ENOMEM;
216 }
217
218 err = usb_control_msg_send(udev, 0, USB_REQ_DFU_DNLOAD, USB_TYPE_VENDOR,
219 0, 0, firmware->data, FW_HDR_SIZE,
220 USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
221 if (err) {
222 BT_ERR("Can't change to loading configuration err");
223 goto error;
224 }
225 sent += FW_HDR_SIZE;
226 count -= FW_HDR_SIZE;
227
228 pipe = usb_sndbulkpipe(udev, 0x02);
229
230 while (count) {
231 /* workaround the compatibility issue with xHCI controller*/
232 usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
233
234 size = min_t(uint, count, BULK_SIZE);
235 memcpy(send_buf, firmware->data + sent, size);
236
237 err = usb_bulk_msg(udev, pipe, send_buf, size,
238 &len, 3000);
239
240 if (err || len != size) {
241 ath3k_log_failed_loading(err, len, size, count);
242 goto error;
243 }
244
245 sent += size;
246 count -= size;
247 }
248
249 error:
250 kfree(send_buf);
251 return err;
252 }
253
ath3k_get_state(struct usb_device * udev,unsigned char * state)254 static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
255 {
256 return usb_control_msg_recv(udev, 0, ATH3K_GETSTATE,
257 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
258 state, 1, USB_CTRL_SET_TIMEOUT,
259 GFP_KERNEL);
260 }
261
ath3k_get_version(struct usb_device * udev,struct ath3k_version * version)262 static int ath3k_get_version(struct usb_device *udev,
263 struct ath3k_version *version)
264 {
265 return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION,
266 USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
267 version, sizeof(*version), USB_CTRL_SET_TIMEOUT,
268 GFP_KERNEL);
269 }
270
ath3k_load_fwfile(struct usb_device * udev,const struct firmware * firmware)271 static int ath3k_load_fwfile(struct usb_device *udev,
272 const struct firmware *firmware)
273 {
274 u8 *send_buf;
275 int len = 0;
276 int err, pipe, size, count, sent = 0;
277 int ret;
278
279 count = firmware->size;
280
281 send_buf = kmalloc(BULK_SIZE, GFP_KERNEL);
282 if (!send_buf) {
283 BT_ERR("Can't allocate memory chunk for firmware");
284 return -ENOMEM;
285 }
286
287 size = min_t(uint, count, FW_HDR_SIZE);
288
289 ret = usb_control_msg_send(udev, 0, ATH3K_DNLOAD, USB_TYPE_VENDOR, 0, 0,
290 firmware->data, size, USB_CTRL_SET_TIMEOUT,
291 GFP_KERNEL);
292 if (ret) {
293 BT_ERR("Can't change to loading configuration err");
294 kfree(send_buf);
295 return ret;
296 }
297
298 sent += size;
299 count -= size;
300
301 pipe = usb_sndbulkpipe(udev, 0x02);
302
303 while (count) {
304 /* workaround the compatibility issue with xHCI controller*/
305 usleep_range(TIMEGAP_USEC_MIN, TIMEGAP_USEC_MAX);
306
307 size = min_t(uint, count, BULK_SIZE);
308 memcpy(send_buf, firmware->data + sent, size);
309
310 err = usb_bulk_msg(udev, pipe, send_buf, size,
311 &len, 3000);
312 if (err || len != size) {
313 ath3k_log_failed_loading(err, len, size, count);
314 kfree(send_buf);
315 return err;
316 }
317 sent += size;
318 count -= size;
319 }
320
321 kfree(send_buf);
322 return 0;
323 }
324
ath3k_switch_pid(struct usb_device * udev)325 static void ath3k_switch_pid(struct usb_device *udev)
326 {
327 usb_control_msg_send(udev, 0, USB_REG_SWITCH_VID_PID, USB_TYPE_VENDOR,
328 0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
329 }
330
ath3k_set_normal_mode(struct usb_device * udev)331 static int ath3k_set_normal_mode(struct usb_device *udev)
332 {
333 unsigned char fw_state;
334 int ret;
335
336 ret = ath3k_get_state(udev, &fw_state);
337 if (ret) {
338 BT_ERR("Can't get state to change to normal mode err");
339 return ret;
340 }
341
342 if ((fw_state & ATH3K_MODE_MASK) == ATH3K_NORMAL_MODE) {
343 BT_DBG("firmware was already in normal mode");
344 return 0;
345 }
346
347 return usb_control_msg_send(udev, 0, ATH3K_SET_NORMAL_MODE,
348 USB_TYPE_VENDOR, 0, 0, NULL, 0,
349 USB_CTRL_SET_TIMEOUT, GFP_KERNEL);
350 }
351
ath3k_load_patch(struct usb_device * udev)352 static int ath3k_load_patch(struct usb_device *udev)
353 {
354 unsigned char fw_state;
355 char filename[ATH3K_NAME_LEN];
356 const struct firmware *firmware;
357 struct ath3k_version fw_version;
358 __u32 pt_rom_version, pt_build_version;
359 int ret;
360
361 ret = ath3k_get_state(udev, &fw_state);
362 if (ret) {
363 BT_ERR("Can't get state to change to load ram patch err");
364 return ret;
365 }
366
367 if (fw_state & ATH3K_PATCH_UPDATE) {
368 BT_DBG("Patch was already downloaded");
369 return 0;
370 }
371
372 ret = ath3k_get_version(udev, &fw_version);
373 if (ret) {
374 BT_ERR("Can't get version to change to load ram patch err");
375 return ret;
376 }
377
378 snprintf(filename, ATH3K_NAME_LEN, "ar3k/AthrBT_0x%08x.dfu",
379 le32_to_cpu(fw_version.rom_version));
380
381 ret = request_firmware(&firmware, filename, &udev->dev);
382 if (ret < 0) {
383 BT_ERR("Patch file not found %s", filename);
384 return ret;
385 }
386
387 pt_rom_version = get_unaligned_le32(firmware->data +
388 firmware->size - 8);
389 pt_build_version = get_unaligned_le32(firmware->data +
390 firmware->size - 4);
391
392 if (pt_rom_version != le32_to_cpu(fw_version.rom_version) ||
393 pt_build_version <= le32_to_cpu(fw_version.build_version)) {
394 BT_ERR("Patch file version did not match with firmware");
395 release_firmware(firmware);
396 return -EINVAL;
397 }
398
399 ret = ath3k_load_fwfile(udev, firmware);
400 release_firmware(firmware);
401
402 return ret;
403 }
404
ath3k_load_syscfg(struct usb_device * udev)405 static int ath3k_load_syscfg(struct usb_device *udev)
406 {
407 unsigned char fw_state;
408 char filename[ATH3K_NAME_LEN];
409 const struct firmware *firmware;
410 struct ath3k_version fw_version;
411 int clk_value, ret;
412
413 ret = ath3k_get_state(udev, &fw_state);
414 if (ret) {
415 BT_ERR("Can't get state to change to load configuration err");
416 return -EBUSY;
417 }
418
419 ret = ath3k_get_version(udev, &fw_version);
420 if (ret) {
421 BT_ERR("Can't get version to change to load ram patch err");
422 return ret;
423 }
424
425 switch (fw_version.ref_clock) {
426 case ATH3K_XTAL_FREQ_26M:
427 clk_value = 26;
428 break;
429 case ATH3K_XTAL_FREQ_40M:
430 clk_value = 40;
431 break;
432 case ATH3K_XTAL_FREQ_19P2:
433 clk_value = 19;
434 break;
435 default:
436 clk_value = 0;
437 break;
438 }
439
440 snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
441 le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
442
443 ret = request_firmware(&firmware, filename, &udev->dev);
444 if (ret < 0) {
445 BT_ERR("Configuration file not found %s", filename);
446 return ret;
447 }
448
449 ret = ath3k_load_fwfile(udev, firmware);
450 release_firmware(firmware);
451
452 return ret;
453 }
454
ath3k_probe(struct usb_interface * intf,const struct usb_device_id * id)455 static int ath3k_probe(struct usb_interface *intf,
456 const struct usb_device_id *id)
457 {
458 const struct firmware *firmware;
459 struct usb_device *udev = interface_to_usbdev(intf);
460 int ret;
461
462 BT_DBG("intf %p id %p", intf, id);
463
464 if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
465 return -ENODEV;
466
467 /* match device ID in ath3k blacklist table */
468 if (!id->driver_info) {
469 const struct usb_device_id *match;
470
471 match = usb_match_id(intf, ath3k_blist_tbl);
472 if (match)
473 id = match;
474 }
475
476 /* load patch and sysconfig files for AR3012 */
477 if (id->driver_info & BTUSB_ATH3012) {
478 /* New firmware with patch and sysconfig files already loaded */
479 if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
480 return -ENODEV;
481
482 ret = ath3k_load_patch(udev);
483 if (ret < 0) {
484 BT_ERR("Loading patch file failed");
485 return ret;
486 }
487 ret = ath3k_load_syscfg(udev);
488 if (ret < 0) {
489 BT_ERR("Loading sysconfig file failed");
490 return ret;
491 }
492 ret = ath3k_set_normal_mode(udev);
493 if (ret) {
494 BT_ERR("Set normal mode failed");
495 return ret;
496 }
497 ath3k_switch_pid(udev);
498 return 0;
499 }
500
501 ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
502 if (ret < 0) {
503 if (ret == -ENOENT)
504 BT_ERR("Firmware file \"%s\" not found",
505 ATH3K_FIRMWARE);
506 else
507 BT_ERR("Firmware file \"%s\" request failed (err=%d)",
508 ATH3K_FIRMWARE, ret);
509 return ret;
510 }
511
512 ret = ath3k_load_firmware(udev, firmware);
513 release_firmware(firmware);
514
515 return ret;
516 }
517
ath3k_disconnect(struct usb_interface * intf)518 static void ath3k_disconnect(struct usb_interface *intf)
519 {
520 BT_DBG("%s intf %p", __func__, intf);
521 }
522
523 static struct usb_driver ath3k_driver = {
524 .name = "ath3k",
525 .probe = ath3k_probe,
526 .disconnect = ath3k_disconnect,
527 .id_table = ath3k_table,
528 .disable_hub_initiated_lpm = 1,
529 };
530
531 module_usb_driver(ath3k_driver);
532
533 MODULE_AUTHOR("Atheros Communications");
534 MODULE_DESCRIPTION("Atheros AR30xx firmware driver");
535 MODULE_VERSION(VERSION);
536 MODULE_LICENSE("GPL");
537 MODULE_FIRMWARE(ATH3K_FIRMWARE);
538