1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2014 Oleksij Rempel <linux@rempel-privat.de>
4  */
5 
6 #include <linux/kernel.h>
7 #include <linux/init.h>
8 #include <linux/interrupt.h>
9 #include <linux/sched.h>
10 #include <linux/clk.h>
11 #include <linux/clocksource.h>
12 #include <linux/clockchips.h>
13 #include <linux/io.h>
14 #include <linux/of.h>
15 #include <linux/of_address.h>
16 #include <linux/of_irq.h>
17 #include <linux/bitops.h>
18 
19 #define DRIVER_NAME	"asm9260-timer"
20 
21 /*
22  * this device provide 4 offsets for each register:
23  * 0x0 - plain read write mode
24  * 0x4 - set mode, OR logic.
25  * 0x8 - clr mode, XOR logic.
26  * 0xc - togle mode.
27  */
28 #define SET_REG 4
29 #define CLR_REG 8
30 
31 #define HW_IR           0x0000 /* RW. Interrupt */
32 #define BM_IR_CR0	BIT(4)
33 #define BM_IR_MR3	BIT(3)
34 #define BM_IR_MR2	BIT(2)
35 #define BM_IR_MR1	BIT(1)
36 #define BM_IR_MR0	BIT(0)
37 
38 #define HW_TCR		0x0010 /* RW. Timer controller */
39 /* BM_C*_RST
40  * Timer Counter and the Prescale Counter are synchronously reset on the
41  * next positive edge of PCLK. The counters remain reset until TCR[1] is
42  * returned to zero. */
43 #define BM_C3_RST	BIT(7)
44 #define BM_C2_RST	BIT(6)
45 #define BM_C1_RST	BIT(5)
46 #define BM_C0_RST	BIT(4)
47 /* BM_C*_EN
48  * 1 - Timer Counter and Prescale Counter are enabled for counting
49  * 0 - counters are disabled */
50 #define BM_C3_EN	BIT(3)
51 #define BM_C2_EN	BIT(2)
52 #define BM_C1_EN	BIT(1)
53 #define BM_C0_EN	BIT(0)
54 
55 #define HW_DIR		0x0020 /* RW. Direction? */
56 /* 00 - count up
57  * 01 - count down
58  * 10 - ?? 2^n/2 */
59 #define BM_DIR_COUNT_UP		0
60 #define BM_DIR_COUNT_DOWN	1
61 #define BM_DIR0_SHIFT	0
62 #define BM_DIR1_SHIFT	4
63 #define BM_DIR2_SHIFT	8
64 #define BM_DIR3_SHIFT	12
65 #define BM_DIR_DEFAULT		(BM_DIR_COUNT_UP << BM_DIR0_SHIFT | \
66 				 BM_DIR_COUNT_UP << BM_DIR1_SHIFT | \
67 				 BM_DIR_COUNT_UP << BM_DIR2_SHIFT | \
68 				 BM_DIR_COUNT_UP << BM_DIR3_SHIFT)
69 
70 #define HW_TC0		0x0030 /* RO. Timer counter 0 */
71 /* HW_TC*. Timer counter owerflow (0xffff.ffff to 0x0000.0000) do not generate
72  * interrupt. This registers can be used to detect overflow */
73 #define HW_TC1          0x0040
74 #define HW_TC2		0x0050
75 #define HW_TC3		0x0060
76 
77 #define HW_PR		0x0070 /* RW. prescaler */
78 #define BM_PR_DISABLE	0
79 #define HW_PC		0x0080 /* RO. Prescaler counter */
80 #define HW_MCR		0x0090 /* RW. Match control */
81 /* enable interrupt on match */
82 #define BM_MCR_INT_EN(n)	(1 << (n * 3 + 0))
83 /* enable TC reset on match */
84 #define BM_MCR_RES_EN(n)	(1 << (n * 3 + 1))
85 /* enable stop TC on match */
86 #define BM_MCR_STOP_EN(n)	(1 << (n * 3 + 2))
87 
88 #define HW_MR0		0x00a0 /* RW. Match reg */
89 #define HW_MR1		0x00b0
90 #define HW_MR2		0x00C0
91 #define HW_MR3		0x00D0
92 
93 #define HW_CTCR		0x0180 /* Counter control */
94 #define BM_CTCR0_SHIFT	0
95 #define BM_CTCR1_SHIFT	2
96 #define BM_CTCR2_SHIFT	4
97 #define BM_CTCR3_SHIFT	6
98 #define BM_CTCR_TM	0	/* Timer mode. Every rising PCLK edge. */
99 #define BM_CTCR_DEFAULT	(BM_CTCR_TM << BM_CTCR0_SHIFT | \
100 			 BM_CTCR_TM << BM_CTCR1_SHIFT | \
101 			 BM_CTCR_TM << BM_CTCR2_SHIFT | \
102 			 BM_CTCR_TM << BM_CTCR3_SHIFT)
103 
104 static struct asm9260_timer_priv {
105 	void __iomem *base;
106 	unsigned long ticks_per_jiffy;
107 } priv;
108 
asm9260_timer_set_next_event(unsigned long delta,struct clock_event_device * evt)109 static int asm9260_timer_set_next_event(unsigned long delta,
110 					 struct clock_event_device *evt)
111 {
112 	/* configure match count for TC0 */
113 	writel_relaxed(delta, priv.base + HW_MR0);
114 	/* enable TC0 */
115 	writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
116 	return 0;
117 }
118 
__asm9260_timer_shutdown(struct clock_event_device * evt)119 static inline void __asm9260_timer_shutdown(struct clock_event_device *evt)
120 {
121 	/* stop timer0 */
122 	writel_relaxed(BM_C0_EN, priv.base + HW_TCR + CLR_REG);
123 }
124 
asm9260_timer_shutdown(struct clock_event_device * evt)125 static int asm9260_timer_shutdown(struct clock_event_device *evt)
126 {
127 	__asm9260_timer_shutdown(evt);
128 	return 0;
129 }
130 
asm9260_timer_set_oneshot(struct clock_event_device * evt)131 static int asm9260_timer_set_oneshot(struct clock_event_device *evt)
132 {
133 	__asm9260_timer_shutdown(evt);
134 
135 	/* enable reset and stop on match */
136 	writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
137 		       priv.base + HW_MCR + SET_REG);
138 	return 0;
139 }
140 
asm9260_timer_set_periodic(struct clock_event_device * evt)141 static int asm9260_timer_set_periodic(struct clock_event_device *evt)
142 {
143 	__asm9260_timer_shutdown(evt);
144 
145 	/* disable reset and stop on match */
146 	writel_relaxed(BM_MCR_RES_EN(0) | BM_MCR_STOP_EN(0),
147 		       priv.base + HW_MCR + CLR_REG);
148 	/* configure match count for TC0 */
149 	writel_relaxed(priv.ticks_per_jiffy, priv.base + HW_MR0);
150 	/* enable TC0 */
151 	writel_relaxed(BM_C0_EN, priv.base + HW_TCR + SET_REG);
152 	return 0;
153 }
154 
155 static struct clock_event_device event_dev = {
156 	.name			= DRIVER_NAME,
157 	.rating			= 200,
158 	.features		= CLOCK_EVT_FEAT_PERIODIC |
159 				  CLOCK_EVT_FEAT_ONESHOT,
160 	.set_next_event		= asm9260_timer_set_next_event,
161 	.set_state_shutdown	= asm9260_timer_shutdown,
162 	.set_state_periodic	= asm9260_timer_set_periodic,
163 	.set_state_oneshot	= asm9260_timer_set_oneshot,
164 	.tick_resume		= asm9260_timer_shutdown,
165 };
166 
asm9260_timer_interrupt(int irq,void * dev_id)167 static irqreturn_t asm9260_timer_interrupt(int irq, void *dev_id)
168 {
169 	struct clock_event_device *evt = dev_id;
170 
171 	evt->event_handler(evt);
172 
173 	writel_relaxed(BM_IR_MR0, priv.base + HW_IR);
174 
175 	return IRQ_HANDLED;
176 }
177 
178 /*
179  * ---------------------------------------------------------------------------
180  * Timer initialization
181  * ---------------------------------------------------------------------------
182  */
asm9260_timer_init(struct device_node * np)183 static int __init asm9260_timer_init(struct device_node *np)
184 {
185 	int irq;
186 	struct clk *clk;
187 	int ret;
188 	unsigned long rate;
189 
190 	priv.base = of_io_request_and_map(np, 0, np->name);
191 	if (IS_ERR(priv.base)) {
192 		pr_err("%pOFn: unable to map resource\n", np);
193 		return PTR_ERR(priv.base);
194 	}
195 
196 	clk = of_clk_get(np, 0);
197 	if (IS_ERR(clk)) {
198 		pr_err("Failed to get clk!\n");
199 		return PTR_ERR(clk);
200 	}
201 
202 	ret = clk_prepare_enable(clk);
203 	if (ret) {
204 		pr_err("Failed to enable clk!\n");
205 		return ret;
206 	}
207 
208 	irq = irq_of_parse_and_map(np, 0);
209 	ret = request_irq(irq, asm9260_timer_interrupt, IRQF_TIMER,
210 			DRIVER_NAME, &event_dev);
211 	if (ret) {
212 		pr_err("Failed to setup irq!\n");
213 		return ret;
214 	}
215 
216 	/* set all timers for count-up */
217 	writel_relaxed(BM_DIR_DEFAULT, priv.base + HW_DIR);
218 	/* disable divider */
219 	writel_relaxed(BM_PR_DISABLE, priv.base + HW_PR);
220 	/* make sure all timers use every rising PCLK edge. */
221 	writel_relaxed(BM_CTCR_DEFAULT, priv.base + HW_CTCR);
222 	/* enable interrupt for TC0 and clean setting for all other lines */
223 	writel_relaxed(BM_MCR_INT_EN(0) , priv.base + HW_MCR);
224 
225 	rate = clk_get_rate(clk);
226 	clocksource_mmio_init(priv.base + HW_TC1, DRIVER_NAME, rate,
227 			200, 32, clocksource_mmio_readl_up);
228 
229 	/* Seems like we can't use counter without match register even if
230 	 * actions for MR are disabled. So, set MR to max value. */
231 	writel_relaxed(0xffffffff, priv.base + HW_MR1);
232 	/* enable TC1 */
233 	writel_relaxed(BM_C1_EN, priv.base + HW_TCR + SET_REG);
234 
235 	priv.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
236 	event_dev.cpumask = cpumask_of(0);
237 	clockevents_config_and_register(&event_dev, rate, 0x2c00, 0xfffffffe);
238 
239 	return 0;
240 }
241 TIMER_OF_DECLARE(asm9260_timer, "alphascale,asm9260-timer",
242 		asm9260_timer_init);
243