1 /*
2 * pata_ali.c - ALI 15x3 PATA for new ATA layer
3 * (C) 2005 Red Hat Inc
4 *
5 * based in part upon
6 * linux/drivers/ide/pci/alim15x3.c Version 0.17 2003/01/02
7 *
8 * Copyright (C) 1998-2000 Michel Aubry, Maintainer
9 * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
10 * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
11 *
12 * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org)
13 * May be copied or modified under the terms of the GNU General Public License
14 * Copyright (C) 2002 Alan Cox <alan@redhat.com>
15 * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
16 *
17 * Documentation
18 * Chipset documentation available under NDA only
19 *
20 * TODO/CHECK
21 * Cannot have ATAPI on both master & slave for rev < c2 (???) but
22 * otherwise should do atapi DMA (For now for old we do PIO only for
23 * ATAPI)
24 * Review Sunblade workaround.
25 */
26
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/pci.h>
30 #include <linux/init.h>
31 #include <linux/blkdev.h>
32 #include <linux/delay.h>
33 #include <scsi/scsi_host.h>
34 #include <linux/libata.h>
35 #include <linux/dmi.h>
36
37 #define DRV_NAME "pata_ali"
38 #define DRV_VERSION "0.7.8"
39
40 static int ali_atapi_dma;
41 module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
42 MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
43
44 static struct pci_dev *ali_isa_bridge;
45
46 /*
47 * Cable special cases
48 */
49
50 static const struct dmi_system_id cable_dmi_table[] = {
51 {
52 .ident = "HP Pavilion N5430",
53 .matches = {
54 DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
55 DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
56 },
57 },
58 {
59 .ident = "Toshiba Satellite S1800-814",
60 .matches = {
61 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
62 DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
63 },
64 },
65 { }
66 };
67
ali_cable_override(struct pci_dev * pdev)68 static int ali_cable_override(struct pci_dev *pdev)
69 {
70 /* Fujitsu P2000 */
71 if (pdev->subsystem_vendor == 0x10CF && pdev->subsystem_device == 0x10AF)
72 return 1;
73 /* Mitac 8317 (Winbook-A) and relatives */
74 if (pdev->subsystem_vendor == 0x1071 && pdev->subsystem_device == 0x8317)
75 return 1;
76 /* Systems by DMI */
77 if (dmi_check_system(cable_dmi_table))
78 return 1;
79 return 0;
80 }
81
82 /**
83 * ali_c2_cable_detect - cable detection
84 * @ap: ATA port
85 *
86 * Perform cable detection for C2 and later revisions
87 */
88
ali_c2_cable_detect(struct ata_port * ap)89 static int ali_c2_cable_detect(struct ata_port *ap)
90 {
91 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
92 u8 ata66;
93
94 /* Certain laptops use short but suitable cables and don't
95 implement the detect logic */
96
97 if (ali_cable_override(pdev))
98 return ATA_CBL_PATA40_SHORT;
99
100 /* Host view cable detect 0x4A bit 0 primary bit 1 secondary
101 Bit set for 40 pin */
102 pci_read_config_byte(pdev, 0x4A, &ata66);
103 if (ata66 & (1 << ap->port_no))
104 return ATA_CBL_PATA40;
105 else
106 return ATA_CBL_PATA80;
107 }
108
109 /**
110 * ali_20_filter - filter for earlier ALI DMA
111 * @adev: ATA device
112 * @mask: received mask to manipulate and pass back
113 *
114 * Ensure that we do not do DMA on CD devices. We may be able to
115 * fix that later on. Also ensure we do not do UDMA on WDC drives
116 */
117
ali_20_filter(struct ata_device * adev,unsigned int mask)118 static unsigned int ali_20_filter(struct ata_device *adev, unsigned int mask)
119 {
120 char model_num[ATA_ID_PROD_LEN + 1];
121 /* No DMA on anything but a disk for now */
122 if (adev->class != ATA_DEV_ATA)
123 mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
124 ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num));
125 if (strstr(model_num, "WDC"))
126 mask &= ~ATA_MASK_UDMA;
127 return mask;
128 }
129
130 /**
131 * ali_fifo_control - FIFO manager
132 * @ap: ALi channel to control
133 * @adev: device for FIFO control
134 * @on: 0 for off 1 for on
135 *
136 * Enable or disable the FIFO on a given device. Because of the way the
137 * ALi FIFO works it provides a boost on ATA disk but can be confused by
138 * ATAPI and we must therefore manage it.
139 */
140
ali_fifo_control(struct ata_port * ap,struct ata_device * adev,int on)141 static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int on)
142 {
143 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
144 int pio_fifo = 0x54 + ap->port_no;
145 u8 fifo;
146 int shift = 4 * adev->devno;
147
148 /* ATA - FIFO on set nibble to 0x05, ATAPI - FIFO off, set nibble to
149 0x00. Not all the docs agree but the behaviour we now use is the
150 one stated in the BIOS Programming Guide */
151
152 pci_read_config_byte(pdev, pio_fifo, &fifo);
153 fifo &= ~(0x0F << shift);
154 fifo |= (on << shift);
155 pci_write_config_byte(pdev, pio_fifo, fifo);
156 }
157
158 /**
159 * ali_program_modes - load mode registers
160 * @ap: ALi channel to load
161 * @adev: Device the timing is for
162 * @t: timing data
163 * @ultra: UDMA timing or zero for off
164 *
165 * Loads the timing registers for cmd/data and disable UDMA if
166 * ultra is zero. If ultra is set then load and enable the UDMA
167 * timing but do not touch the command/data timing.
168 */
169
ali_program_modes(struct ata_port * ap,struct ata_device * adev,struct ata_timing * t,u8 ultra)170 static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, struct ata_timing *t, u8 ultra)
171 {
172 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
173 int cas = 0x58 + 4 * ap->port_no; /* Command timing */
174 int cbt = 0x59 + 4 * ap->port_no; /* Command timing */
175 int drwt = 0x5A + 4 * ap->port_no + adev->devno; /* R/W timing */
176 int udmat = 0x56 + ap->port_no; /* UDMA timing */
177 int shift = 4 * adev->devno;
178 u8 udma;
179
180 if (t != NULL) {
181 t->setup = clamp_val(t->setup, 1, 8) & 7;
182 t->act8b = clamp_val(t->act8b, 1, 8) & 7;
183 t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
184 t->active = clamp_val(t->active, 1, 8) & 7;
185 t->recover = clamp_val(t->recover, 1, 16) & 15;
186
187 pci_write_config_byte(pdev, cas, t->setup);
188 pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b);
189 pci_write_config_byte(pdev, drwt, (t->active << 4) | t->recover);
190 }
191
192 /* Set up the UDMA enable */
193 pci_read_config_byte(pdev, udmat, &udma);
194 udma &= ~(0x0F << shift);
195 udma |= ultra << shift;
196 pci_write_config_byte(pdev, udmat, udma);
197 }
198
199 /**
200 * ali_set_piomode - set initial PIO mode data
201 * @ap: ATA interface
202 * @adev: ATA device
203 *
204 * Program the ALi registers for PIO mode.
205 */
206
ali_set_piomode(struct ata_port * ap,struct ata_device * adev)207 static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev)
208 {
209 struct ata_device *pair = ata_dev_pair(adev);
210 struct ata_timing t;
211 unsigned long T = 1000000000 / 33333; /* PCI clock based */
212
213 ata_timing_compute(adev, adev->pio_mode, &t, T, 1);
214 if (pair) {
215 struct ata_timing p;
216 ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
217 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
218 if (ata_dma_enabled(pair)) {
219 ata_timing_compute(pair, pair->dma_mode, &p, T, 1);
220 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
221 }
222 }
223
224 /* PIO FIFO is only permitted on ATA disk */
225 if (adev->class != ATA_DEV_ATA)
226 ali_fifo_control(ap, adev, 0x00);
227 ali_program_modes(ap, adev, &t, 0);
228 if (adev->class == ATA_DEV_ATA)
229 ali_fifo_control(ap, adev, 0x05);
230
231 }
232
233 /**
234 * ali_set_dmamode - set initial DMA mode data
235 * @ap: ATA interface
236 * @adev: ATA device
237 *
238 * Program the ALi registers for DMA mode.
239 */
240
ali_set_dmamode(struct ata_port * ap,struct ata_device * adev)241 static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
242 {
243 static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD };
244 struct ata_device *pair = ata_dev_pair(adev);
245 struct ata_timing t;
246 unsigned long T = 1000000000 / 33333; /* PCI clock based */
247 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
248
249
250 if (adev->class == ATA_DEV_ATA)
251 ali_fifo_control(ap, adev, 0x08);
252
253 if (adev->dma_mode >= XFER_UDMA_0) {
254 ali_program_modes(ap, adev, NULL, udma_timing[adev->dma_mode - XFER_UDMA_0]);
255 if (adev->dma_mode >= XFER_UDMA_3) {
256 u8 reg4b;
257 pci_read_config_byte(pdev, 0x4B, ®4b);
258 reg4b |= 1;
259 pci_write_config_byte(pdev, 0x4B, reg4b);
260 }
261 } else {
262 ata_timing_compute(adev, adev->dma_mode, &t, T, 1);
263 if (pair) {
264 struct ata_timing p;
265 ata_timing_compute(pair, pair->pio_mode, &p, T, 1);
266 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
267 if (ata_dma_enabled(pair)) {
268 ata_timing_compute(pair, pair->dma_mode, &p, T, 1);
269 ata_timing_merge(&p, &t, &t, ATA_TIMING_SETUP|ATA_TIMING_8BIT);
270 }
271 }
272 ali_program_modes(ap, adev, &t, 0);
273 }
274 }
275
276 /**
277 * ali_warn_atapi_dma - Warn about ATAPI DMA disablement
278 * @adev: Device
279 *
280 * Whine about ATAPI DMA disablement if @adev is an ATAPI device.
281 * Can be used as ->dev_config.
282 */
283
ali_warn_atapi_dma(struct ata_device * adev)284 static void ali_warn_atapi_dma(struct ata_device *adev)
285 {
286 struct ata_eh_context *ehc = &adev->link->eh_context;
287 int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
288
289 if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
290 ata_dev_warn(adev,
291 "WARNING: ATAPI DMA disabled for reliability issues. It can be enabled\n");
292 ata_dev_warn(adev,
293 "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
294 }
295 }
296
297 /**
298 * ali_lock_sectors - Keep older devices to 255 sector mode
299 * @adev: Device
300 *
301 * Called during the bus probe for each device that is found. We use
302 * this call to lock the sector count of the device to 255 or less on
303 * older ALi controllers. If we didn't do this then large I/O's would
304 * require LBA48 commands which the older ALi requires are issued by
305 * slower PIO methods
306 */
307
ali_lock_sectors(struct ata_device * adev)308 static void ali_lock_sectors(struct ata_device *adev)
309 {
310 adev->max_sectors = 255;
311 ali_warn_atapi_dma(adev);
312 }
313
314 /**
315 * ali_check_atapi_dma - DMA check for most ALi controllers
316 * @qc: Command to complete
317 *
318 * Called to decide whether commands should be sent by DMA or PIO
319 */
320
ali_check_atapi_dma(struct ata_queued_cmd * qc)321 static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
322 {
323 if (!ali_atapi_dma) {
324 /* FIXME: pata_ali can't do ATAPI DMA reliably but the
325 * IDE alim15x3 driver can. I tried lots of things
326 * but couldn't find what the actual difference was.
327 * If you got an idea, please write it to
328 * linux-ide@vger.kernel.org and cc htejun@gmail.com.
329 *
330 * Disable ATAPI DMA for now.
331 */
332 return -EOPNOTSUPP;
333 }
334
335 /* If its not a media command, its not worth it */
336 if (atapi_cmd_type(qc->cdb[0]) == ATAPI_MISC)
337 return -EOPNOTSUPP;
338 return 0;
339 }
340
ali_c2_c3_postreset(struct ata_link * link,unsigned int * classes)341 static void ali_c2_c3_postreset(struct ata_link *link, unsigned int *classes)
342 {
343 u8 r;
344 int port_bit = 4 << link->ap->port_no;
345
346 /* If our bridge is an ALI 1533 then do the extra work */
347 if (ali_isa_bridge) {
348 /* Tristate and re-enable the bus signals */
349 pci_read_config_byte(ali_isa_bridge, 0x58, &r);
350 r &= ~port_bit;
351 pci_write_config_byte(ali_isa_bridge, 0x58, r);
352 r |= port_bit;
353 pci_write_config_byte(ali_isa_bridge, 0x58, r);
354 }
355 ata_sff_postreset(link, classes);
356 }
357
358 static const struct scsi_host_template ali_sht = {
359 ATA_BMDMA_SHT(DRV_NAME),
360 };
361
362 /*
363 * Port operations for PIO only ALi
364 */
365
366 static struct ata_port_operations ali_early_port_ops = {
367 .inherits = &ata_sff_port_ops,
368 .cable_detect = ata_cable_40wire,
369 .set_piomode = ali_set_piomode,
370 .sff_data_xfer = ata_sff_data_xfer32,
371 };
372
373 static const struct ata_port_operations ali_dma_base_ops = {
374 .inherits = &ata_bmdma32_port_ops,
375 .set_piomode = ali_set_piomode,
376 .set_dmamode = ali_set_dmamode,
377 };
378
379 /*
380 * Port operations for DMA capable ALi without cable
381 * detect
382 */
383 static struct ata_port_operations ali_20_port_ops = {
384 .inherits = &ali_dma_base_ops,
385 .cable_detect = ata_cable_40wire,
386 .mode_filter = ali_20_filter,
387 .check_atapi_dma = ali_check_atapi_dma,
388 .dev_config = ali_lock_sectors,
389 };
390
391 /*
392 * Port operations for DMA capable ALi with cable detect
393 */
394 static struct ata_port_operations ali_c2_port_ops = {
395 .inherits = &ali_dma_base_ops,
396 .check_atapi_dma = ali_check_atapi_dma,
397 .cable_detect = ali_c2_cable_detect,
398 .dev_config = ali_lock_sectors,
399 .postreset = ali_c2_c3_postreset,
400 };
401
402 /*
403 * Port operations for DMA capable ALi with cable detect
404 */
405 static struct ata_port_operations ali_c4_port_ops = {
406 .inherits = &ali_dma_base_ops,
407 .check_atapi_dma = ali_check_atapi_dma,
408 .cable_detect = ali_c2_cable_detect,
409 .dev_config = ali_lock_sectors,
410 };
411
412 /*
413 * Port operations for DMA capable ALi with cable detect and LBA48
414 */
415 static struct ata_port_operations ali_c5_port_ops = {
416 .inherits = &ali_dma_base_ops,
417 .check_atapi_dma = ali_check_atapi_dma,
418 .dev_config = ali_warn_atapi_dma,
419 .cable_detect = ali_c2_cable_detect,
420 };
421
422
423 /**
424 * ali_init_chipset - chip setup function
425 * @pdev: PCI device of ATA controller
426 *
427 * Perform the setup on the device that must be done both at boot
428 * and at resume time.
429 */
430
ali_init_chipset(struct pci_dev * pdev)431 static void ali_init_chipset(struct pci_dev *pdev)
432 {
433 u8 tmp;
434 struct pci_dev *north;
435
436 /*
437 * The chipset revision selects the driver operations and
438 * mode data.
439 */
440
441 if (pdev->revision <= 0x20) {
442 pci_read_config_byte(pdev, 0x53, &tmp);
443 tmp |= 0x03;
444 pci_write_config_byte(pdev, 0x53, tmp);
445 } else {
446 pci_read_config_byte(pdev, 0x4a, &tmp);
447 pci_write_config_byte(pdev, 0x4a, tmp | 0x20);
448 pci_read_config_byte(pdev, 0x4B, &tmp);
449 if (pdev->revision < 0xC2)
450 /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
451 /* Clear CD-ROM DMA write bit */
452 tmp &= 0x7F;
453 /* Cable and UDMA */
454 if (pdev->revision >= 0xc2)
455 tmp |= 0x01;
456 pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
457 /*
458 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
459 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
460 * via 0x54/55.
461 */
462 pci_read_config_byte(pdev, 0x53, &tmp);
463 if (pdev->revision >= 0xc7)
464 tmp |= 0x03;
465 else
466 tmp |= 0x01; /* CD_ROM enable for DMA */
467 pci_write_config_byte(pdev, 0x53, tmp);
468 }
469 north = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), 0,
470 PCI_DEVFN(0, 0));
471 if (north && north->vendor == PCI_VENDOR_ID_AL && ali_isa_bridge) {
472 /* Configure the ALi bridge logic. For non ALi rely on BIOS.
473 Set the south bridge enable bit */
474 pci_read_config_byte(ali_isa_bridge, 0x79, &tmp);
475 if (pdev->revision == 0xC2)
476 pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x04);
477 else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
478 pci_write_config_byte(ali_isa_bridge, 0x79, tmp | 0x02);
479 }
480 pci_dev_put(north);
481 ata_pci_bmdma_clear_simplex(pdev);
482 }
483 /**
484 * ali_init_one - discovery callback
485 * @pdev: PCI device ID
486 * @id: PCI table info
487 *
488 * An ALi IDE interface has been discovered. Figure out what revision
489 * and perform configuration work before handing it to the ATA layer
490 */
491
ali_init_one(struct pci_dev * pdev,const struct pci_device_id * id)492 static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
493 {
494 static const struct ata_port_info info_early = {
495 .flags = ATA_FLAG_SLAVE_POSS,
496 .pio_mask = ATA_PIO4,
497 .port_ops = &ali_early_port_ops
498 };
499 /* Revision 0x20 added DMA */
500 static const struct ata_port_info info_20 = {
501 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
502 ATA_FLAG_IGN_SIMPLEX,
503 .pio_mask = ATA_PIO4,
504 .mwdma_mask = ATA_MWDMA2,
505 .port_ops = &ali_20_port_ops
506 };
507 /* Revision 0x20 with support logic added UDMA */
508 static const struct ata_port_info info_20_udma = {
509 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
510 ATA_FLAG_IGN_SIMPLEX,
511 .pio_mask = ATA_PIO4,
512 .mwdma_mask = ATA_MWDMA2,
513 .udma_mask = ATA_UDMA2,
514 .port_ops = &ali_20_port_ops
515 };
516 /* Revision 0xC2 adds UDMA66 */
517 static const struct ata_port_info info_c2 = {
518 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
519 ATA_FLAG_IGN_SIMPLEX,
520 .pio_mask = ATA_PIO4,
521 .mwdma_mask = ATA_MWDMA2,
522 .udma_mask = ATA_UDMA4,
523 .port_ops = &ali_c2_port_ops
524 };
525 /* Revision 0xC3 is UDMA66 for now */
526 static const struct ata_port_info info_c3 = {
527 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
528 ATA_FLAG_IGN_SIMPLEX,
529 .pio_mask = ATA_PIO4,
530 .mwdma_mask = ATA_MWDMA2,
531 .udma_mask = ATA_UDMA4,
532 .port_ops = &ali_c2_port_ops
533 };
534 /* Revision 0xC4 is UDMA100 */
535 static const struct ata_port_info info_c4 = {
536 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
537 ATA_FLAG_IGN_SIMPLEX,
538 .pio_mask = ATA_PIO4,
539 .mwdma_mask = ATA_MWDMA2,
540 .udma_mask = ATA_UDMA5,
541 .port_ops = &ali_c4_port_ops
542 };
543 /* Revision 0xC5 is UDMA133 with LBA48 DMA */
544 static const struct ata_port_info info_c5 = {
545 .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_IGN_SIMPLEX,
546 .pio_mask = ATA_PIO4,
547 .mwdma_mask = ATA_MWDMA2,
548 .udma_mask = ATA_UDMA6,
549 .port_ops = &ali_c5_port_ops
550 };
551
552 const struct ata_port_info *ppi[] = { NULL, NULL };
553 u8 tmp;
554 int rc;
555
556 rc = pcim_enable_device(pdev);
557 if (rc)
558 return rc;
559
560 /*
561 * The chipset revision selects the driver operations and
562 * mode data.
563 */
564
565 if (pdev->revision < 0x20) {
566 ppi[0] = &info_early;
567 } else if (pdev->revision < 0xC2) {
568 ppi[0] = &info_20;
569 } else if (pdev->revision == 0xC2) {
570 ppi[0] = &info_c2;
571 } else if (pdev->revision == 0xC3) {
572 ppi[0] = &info_c3;
573 } else if (pdev->revision == 0xC4) {
574 ppi[0] = &info_c4;
575 } else
576 ppi[0] = &info_c5;
577
578 ali_init_chipset(pdev);
579
580 if (ali_isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
581 /* Are we paired with a UDMA capable chip */
582 pci_read_config_byte(ali_isa_bridge, 0x5E, &tmp);
583 if ((tmp & 0x1E) == 0x12)
584 ppi[0] = &info_20_udma;
585 }
586
587 if (!ppi[0]->mwdma_mask && !ppi[0]->udma_mask)
588 return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
589 else
590 return ata_pci_bmdma_init_one(pdev, ppi, &ali_sht, NULL, 0);
591 }
592
593 #ifdef CONFIG_PM_SLEEP
ali_reinit_one(struct pci_dev * pdev)594 static int ali_reinit_one(struct pci_dev *pdev)
595 {
596 struct ata_host *host = pci_get_drvdata(pdev);
597 int rc;
598
599 rc = ata_pci_device_do_resume(pdev);
600 if (rc)
601 return rc;
602 ali_init_chipset(pdev);
603 ata_host_resume(host);
604 return 0;
605 }
606 #endif
607
608 static const struct pci_device_id ali[] = {
609 { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), },
610 { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), },
611
612 { },
613 };
614
615 static struct pci_driver ali_pci_driver = {
616 .name = DRV_NAME,
617 .id_table = ali,
618 .probe = ali_init_one,
619 .remove = ata_pci_remove_one,
620 #ifdef CONFIG_PM_SLEEP
621 .suspend = ata_pci_device_suspend,
622 .resume = ali_reinit_one,
623 #endif
624 };
625
ali_init(void)626 static int __init ali_init(void)
627 {
628 int ret;
629 ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
630
631 ret = pci_register_driver(&ali_pci_driver);
632 if (ret < 0)
633 pci_dev_put(ali_isa_bridge);
634 return ret;
635 }
636
637
ali_exit(void)638 static void __exit ali_exit(void)
639 {
640 pci_unregister_driver(&ali_pci_driver);
641 pci_dev_put(ali_isa_bridge);
642 }
643
644
645 MODULE_AUTHOR("Alan Cox");
646 MODULE_DESCRIPTION("low-level driver for ALi PATA");
647 MODULE_LICENSE("GPL");
648 MODULE_DEVICE_TABLE(pci, ali);
649 MODULE_VERSION(DRV_VERSION);
650
651 module_init(ali_init);
652 module_exit(ali_exit);
653