1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * AD7606 SPI ADC driver
4 *
5 * Copyright 2011 Analog Devices Inc.
6 */
7
8 #include <linux/module.h>
9 #include <linux/spi/spi.h>
10 #include <linux/types.h>
11 #include <linux/err.h>
12
13 #include <linux/iio/iio.h>
14 #include "ad7606.h"
15
16 #define MAX_SPI_FREQ_HZ 23500000 /* VDRIVE above 4.75 V */
17
18 #define AD7616_CONFIGURATION_REGISTER 0x02
19 #define AD7616_OS_MASK GENMASK(4, 2)
20 #define AD7616_BURST_MODE BIT(6)
21 #define AD7616_SEQEN_MODE BIT(5)
22 #define AD7616_RANGE_CH_A_ADDR_OFF 0x04
23 #define AD7616_RANGE_CH_B_ADDR_OFF 0x06
24 /*
25 * Range of channels from a group are stored in 2 registers.
26 * 0, 1, 2, 3 in a register followed by 4, 5, 6, 7 in second register.
27 * For channels from second group(8-15) the order is the same, only with
28 * an offset of 2 for register address.
29 */
30 #define AD7616_RANGE_CH_ADDR(ch) ((ch) >> 2)
31 /* The range of the channel is stored in 2 bits */
32 #define AD7616_RANGE_CH_MSK(ch) (0b11 << (((ch) & 0b11) * 2))
33 #define AD7616_RANGE_CH_MODE(ch, mode) ((mode) << ((((ch) & 0b11)) * 2))
34
35 #define AD7606_CONFIGURATION_REGISTER 0x02
36 #define AD7606_SINGLE_DOUT 0x00
37
38 /*
39 * Range for AD7606B channels are stored in registers starting with address 0x3.
40 * Each register stores range for 2 channels(4 bits per channel).
41 */
42 #define AD7606_RANGE_CH_MSK(ch) (GENMASK(3, 0) << (4 * ((ch) & 0x1)))
43 #define AD7606_RANGE_CH_MODE(ch, mode) \
44 ((GENMASK(3, 0) & mode) << (4 * ((ch) & 0x1)))
45 #define AD7606_RANGE_CH_ADDR(ch) (0x03 + ((ch) >> 1))
46 #define AD7606_OS_MODE 0x08
47
48 static const struct iio_chan_spec ad7616_sw_channels[] = {
49 IIO_CHAN_SOFT_TIMESTAMP(16),
50 AD7616_CHANNEL(0),
51 AD7616_CHANNEL(1),
52 AD7616_CHANNEL(2),
53 AD7616_CHANNEL(3),
54 AD7616_CHANNEL(4),
55 AD7616_CHANNEL(5),
56 AD7616_CHANNEL(6),
57 AD7616_CHANNEL(7),
58 AD7616_CHANNEL(8),
59 AD7616_CHANNEL(9),
60 AD7616_CHANNEL(10),
61 AD7616_CHANNEL(11),
62 AD7616_CHANNEL(12),
63 AD7616_CHANNEL(13),
64 AD7616_CHANNEL(14),
65 AD7616_CHANNEL(15),
66 };
67
68 static const struct iio_chan_spec ad7606b_sw_channels[] = {
69 IIO_CHAN_SOFT_TIMESTAMP(8),
70 AD7616_CHANNEL(0),
71 AD7616_CHANNEL(1),
72 AD7616_CHANNEL(2),
73 AD7616_CHANNEL(3),
74 AD7616_CHANNEL(4),
75 AD7616_CHANNEL(5),
76 AD7616_CHANNEL(6),
77 AD7616_CHANNEL(7),
78 };
79
80 static const unsigned int ad7606B_oversampling_avail[9] = {
81 1, 2, 4, 8, 16, 32, 64, 128, 256
82 };
83
ad7616_spi_rd_wr_cmd(int addr,char isWriteOp)84 static u16 ad7616_spi_rd_wr_cmd(int addr, char isWriteOp)
85 {
86 /*
87 * The address of register consist of one w/r bit
88 * 6 bits of address followed by one reserved bit.
89 */
90 return ((addr & 0x7F) << 1) | ((isWriteOp & 0x1) << 7);
91 }
92
ad7606B_spi_rd_wr_cmd(int addr,char is_write_op)93 static u16 ad7606B_spi_rd_wr_cmd(int addr, char is_write_op)
94 {
95 /*
96 * The address of register consists of one bit which
97 * specifies a read command placed in bit 6, followed by
98 * 6 bits of address.
99 */
100 return (addr & 0x3F) | (((~is_write_op) & 0x1) << 6);
101 }
102
ad7606_spi_read_block(struct device * dev,int count,void * buf)103 static int ad7606_spi_read_block(struct device *dev,
104 int count, void *buf)
105 {
106 struct spi_device *spi = to_spi_device(dev);
107 int i, ret;
108 unsigned short *data = buf;
109 __be16 *bdata = buf;
110
111 ret = spi_read(spi, buf, count * 2);
112 if (ret < 0) {
113 dev_err(&spi->dev, "SPI read error\n");
114 return ret;
115 }
116
117 for (i = 0; i < count; i++)
118 data[i] = be16_to_cpu(bdata[i]);
119
120 return 0;
121 }
122
ad7606_spi_reg_read(struct ad7606_state * st,unsigned int addr)123 static int ad7606_spi_reg_read(struct ad7606_state *st, unsigned int addr)
124 {
125 struct spi_device *spi = to_spi_device(st->dev);
126 struct spi_transfer t[] = {
127 {
128 .tx_buf = &st->d16[0],
129 .len = 2,
130 .cs_change = 0,
131 }, {
132 .rx_buf = &st->d16[1],
133 .len = 2,
134 },
135 };
136 int ret;
137
138 st->d16[0] = cpu_to_be16(st->bops->rd_wr_cmd(addr, 0) << 8);
139
140 ret = spi_sync_transfer(spi, t, ARRAY_SIZE(t));
141 if (ret < 0)
142 return ret;
143
144 return be16_to_cpu(st->d16[1]);
145 }
146
ad7606_spi_reg_write(struct ad7606_state * st,unsigned int addr,unsigned int val)147 static int ad7606_spi_reg_write(struct ad7606_state *st,
148 unsigned int addr,
149 unsigned int val)
150 {
151 struct spi_device *spi = to_spi_device(st->dev);
152
153 st->d16[0] = cpu_to_be16((st->bops->rd_wr_cmd(addr, 1) << 8) |
154 (val & 0x1FF));
155
156 return spi_write(spi, &st->d16[0], sizeof(st->d16[0]));
157 }
158
ad7606_spi_write_mask(struct ad7606_state * st,unsigned int addr,unsigned long mask,unsigned int val)159 static int ad7606_spi_write_mask(struct ad7606_state *st,
160 unsigned int addr,
161 unsigned long mask,
162 unsigned int val)
163 {
164 int readval;
165
166 readval = st->bops->reg_read(st, addr);
167 if (readval < 0)
168 return readval;
169
170 readval &= ~mask;
171 readval |= val;
172
173 return st->bops->reg_write(st, addr, readval);
174 }
175
ad7616_write_scale_sw(struct iio_dev * indio_dev,int ch,int val)176 static int ad7616_write_scale_sw(struct iio_dev *indio_dev, int ch, int val)
177 {
178 struct ad7606_state *st = iio_priv(indio_dev);
179 unsigned int ch_addr, mode, ch_index;
180
181
182 /*
183 * Ad7616 has 16 channels divided in group A and group B.
184 * The range of channels from A are stored in registers with address 4
185 * while channels from B are stored in register with address 6.
186 * The last bit from channels determines if it is from group A or B
187 * because the order of channels in iio is 0A, 0B, 1A, 1B...
188 */
189 ch_index = ch >> 1;
190
191 ch_addr = AD7616_RANGE_CH_ADDR(ch_index);
192
193 if ((ch & 0x1) == 0) /* channel A */
194 ch_addr += AD7616_RANGE_CH_A_ADDR_OFF;
195 else /* channel B */
196 ch_addr += AD7616_RANGE_CH_B_ADDR_OFF;
197
198 /* 0b01 for 2.5v, 0b10 for 5v and 0b11 for 10v */
199 mode = AD7616_RANGE_CH_MODE(ch_index, ((val + 1) & 0b11));
200 return st->bops->write_mask(st, ch_addr, AD7616_RANGE_CH_MSK(ch_index),
201 mode);
202 }
203
ad7616_write_os_sw(struct iio_dev * indio_dev,int val)204 static int ad7616_write_os_sw(struct iio_dev *indio_dev, int val)
205 {
206 struct ad7606_state *st = iio_priv(indio_dev);
207
208 return st->bops->write_mask(st, AD7616_CONFIGURATION_REGISTER,
209 AD7616_OS_MASK, val << 2);
210 }
211
ad7606_write_scale_sw(struct iio_dev * indio_dev,int ch,int val)212 static int ad7606_write_scale_sw(struct iio_dev *indio_dev, int ch, int val)
213 {
214 struct ad7606_state *st = iio_priv(indio_dev);
215
216 return ad7606_spi_write_mask(st,
217 AD7606_RANGE_CH_ADDR(ch),
218 AD7606_RANGE_CH_MSK(ch),
219 AD7606_RANGE_CH_MODE(ch, val));
220 }
221
ad7606_write_os_sw(struct iio_dev * indio_dev,int val)222 static int ad7606_write_os_sw(struct iio_dev *indio_dev, int val)
223 {
224 struct ad7606_state *st = iio_priv(indio_dev);
225
226 return ad7606_spi_reg_write(st, AD7606_OS_MODE, val);
227 }
228
ad7616_sw_mode_config(struct iio_dev * indio_dev)229 static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
230 {
231 struct ad7606_state *st = iio_priv(indio_dev);
232
233 /*
234 * Scale can be configured individually for each channel
235 * in software mode.
236 */
237 indio_dev->channels = ad7616_sw_channels;
238
239 st->write_scale = ad7616_write_scale_sw;
240 st->write_os = &ad7616_write_os_sw;
241
242 /* Activate Burst mode and SEQEN MODE */
243 return st->bops->write_mask(st,
244 AD7616_CONFIGURATION_REGISTER,
245 AD7616_BURST_MODE | AD7616_SEQEN_MODE,
246 AD7616_BURST_MODE | AD7616_SEQEN_MODE);
247 }
248
ad7606B_sw_mode_config(struct iio_dev * indio_dev)249 static int ad7606B_sw_mode_config(struct iio_dev *indio_dev)
250 {
251 struct ad7606_state *st = iio_priv(indio_dev);
252 DECLARE_BITMAP(os, 3);
253
254 bitmap_fill(os, 3);
255 /*
256 * Software mode is enabled when all three oversampling
257 * pins are set to high. If oversampling gpios are defined
258 * in the device tree, then they need to be set to high,
259 * otherwise, they must be hardwired to VDD
260 */
261 if (st->gpio_os) {
262 gpiod_set_array_value(st->gpio_os->ndescs,
263 st->gpio_os->desc, st->gpio_os->info, os);
264 }
265 /* OS of 128 and 256 are available only in software mode */
266 st->oversampling_avail = ad7606B_oversampling_avail;
267 st->num_os_ratios = ARRAY_SIZE(ad7606B_oversampling_avail);
268
269 st->write_scale = ad7606_write_scale_sw;
270 st->write_os = &ad7606_write_os_sw;
271
272 /* Configure device spi to output on a single channel */
273 st->bops->reg_write(st,
274 AD7606_CONFIGURATION_REGISTER,
275 AD7606_SINGLE_DOUT);
276
277 /*
278 * Scale can be configured individually for each channel
279 * in software mode.
280 */
281 indio_dev->channels = ad7606b_sw_channels;
282
283 return 0;
284 }
285
286 static const struct ad7606_bus_ops ad7606_spi_bops = {
287 .read_block = ad7606_spi_read_block,
288 };
289
290 static const struct ad7606_bus_ops ad7616_spi_bops = {
291 .read_block = ad7606_spi_read_block,
292 .reg_read = ad7606_spi_reg_read,
293 .reg_write = ad7606_spi_reg_write,
294 .write_mask = ad7606_spi_write_mask,
295 .rd_wr_cmd = ad7616_spi_rd_wr_cmd,
296 .sw_mode_config = ad7616_sw_mode_config,
297 };
298
299 static const struct ad7606_bus_ops ad7606B_spi_bops = {
300 .read_block = ad7606_spi_read_block,
301 .reg_read = ad7606_spi_reg_read,
302 .reg_write = ad7606_spi_reg_write,
303 .write_mask = ad7606_spi_write_mask,
304 .rd_wr_cmd = ad7606B_spi_rd_wr_cmd,
305 .sw_mode_config = ad7606B_sw_mode_config,
306 };
307
ad7606_spi_probe(struct spi_device * spi)308 static int ad7606_spi_probe(struct spi_device *spi)
309 {
310 const struct spi_device_id *id = spi_get_device_id(spi);
311 const struct ad7606_bus_ops *bops;
312
313 switch (id->driver_data) {
314 case ID_AD7616:
315 bops = &ad7616_spi_bops;
316 break;
317 case ID_AD7606B:
318 bops = &ad7606B_spi_bops;
319 break;
320 default:
321 bops = &ad7606_spi_bops;
322 break;
323 }
324
325 return ad7606_probe(&spi->dev, spi->irq, NULL,
326 id->name, id->driver_data,
327 bops);
328 }
329
330 static const struct spi_device_id ad7606_id_table[] = {
331 { "ad7605-4", ID_AD7605_4 },
332 { "ad7606-4", ID_AD7606_4 },
333 { "ad7606-6", ID_AD7606_6 },
334 { "ad7606-8", ID_AD7606_8 },
335 { "ad7606b", ID_AD7606B },
336 { "ad7616", ID_AD7616 },
337 {}
338 };
339 MODULE_DEVICE_TABLE(spi, ad7606_id_table);
340
341 static const struct of_device_id ad7606_of_match[] = {
342 { .compatible = "adi,ad7605-4" },
343 { .compatible = "adi,ad7606-4" },
344 { .compatible = "adi,ad7606-6" },
345 { .compatible = "adi,ad7606-8" },
346 { .compatible = "adi,ad7606b" },
347 { .compatible = "adi,ad7616" },
348 { },
349 };
350 MODULE_DEVICE_TABLE(of, ad7606_of_match);
351
352 static struct spi_driver ad7606_driver = {
353 .driver = {
354 .name = "ad7606",
355 .of_match_table = ad7606_of_match,
356 .pm = AD7606_PM_OPS,
357 },
358 .probe = ad7606_spi_probe,
359 .id_table = ad7606_id_table,
360 };
361 module_spi_driver(ad7606_driver);
362
363 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
364 MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
365 MODULE_LICENSE("GPL v2");
366 MODULE_IMPORT_NS(IIO_AD7606);
367