1 // SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2 /******************************************************************************
3 *
4 * Module Name: dswload - Dispatcher first pass namespace load callbacks
5 *
6 * Copyright (C) 2000 - 2023, Intel Corp.
7 *
8 *****************************************************************************/
9
10 #include <acpi/acpi.h>
11 #include "accommon.h"
12 #include "acparser.h"
13 #include "amlcode.h"
14 #include "acdispat.h"
15 #include "acinterp.h"
16 #include "acnamesp.h"
17 #ifdef ACPI_ASL_COMPILER
18 #include "acdisasm.h"
19 #endif
20
21 #define _COMPONENT ACPI_DISPATCHER
22 ACPI_MODULE_NAME("dswload")
23
24 /*******************************************************************************
25 *
26 * FUNCTION: acpi_ds_init_callbacks
27 *
28 * PARAMETERS: walk_state - Current state of the parse tree walk
29 * pass_number - 1, 2, or 3
30 *
31 * RETURN: Status
32 *
33 * DESCRIPTION: Init walk state callbacks
34 *
35 ******************************************************************************/
36 acpi_status
acpi_ds_init_callbacks(struct acpi_walk_state * walk_state,u32 pass_number)37 acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number)
38 {
39
40 switch (pass_number) {
41 case 0:
42
43 /* Parse only - caller will setup callbacks */
44
45 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
46 ACPI_PARSE_DELETE_TREE | ACPI_PARSE_DISASSEMBLE;
47 walk_state->descending_callback = NULL;
48 walk_state->ascending_callback = NULL;
49 break;
50
51 case 1:
52
53 /* Load pass 1 */
54
55 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
56 ACPI_PARSE_DELETE_TREE;
57 walk_state->descending_callback = acpi_ds_load1_begin_op;
58 walk_state->ascending_callback = acpi_ds_load1_end_op;
59 break;
60
61 case 2:
62
63 /* Load pass 2 */
64
65 walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
66 ACPI_PARSE_DELETE_TREE;
67 walk_state->descending_callback = acpi_ds_load2_begin_op;
68 walk_state->ascending_callback = acpi_ds_load2_end_op;
69 break;
70
71 case 3:
72
73 /* Execution pass */
74
75 walk_state->parse_flags |= ACPI_PARSE_EXECUTE |
76 ACPI_PARSE_DELETE_TREE;
77 walk_state->descending_callback = acpi_ds_exec_begin_op;
78 walk_state->ascending_callback = acpi_ds_exec_end_op;
79 break;
80
81 default:
82
83 return (AE_BAD_PARAMETER);
84 }
85
86 return (AE_OK);
87 }
88
89 /*******************************************************************************
90 *
91 * FUNCTION: acpi_ds_load1_begin_op
92 *
93 * PARAMETERS: walk_state - Current state of the parse tree walk
94 * out_op - Where to return op if a new one is created
95 *
96 * RETURN: Status
97 *
98 * DESCRIPTION: Descending callback used during the loading of ACPI tables.
99 *
100 ******************************************************************************/
101
102 acpi_status
acpi_ds_load1_begin_op(struct acpi_walk_state * walk_state,union acpi_parse_object ** out_op)103 acpi_ds_load1_begin_op(struct acpi_walk_state *walk_state,
104 union acpi_parse_object **out_op)
105 {
106 union acpi_parse_object *op;
107 struct acpi_namespace_node *node;
108 acpi_status status;
109 acpi_object_type object_type;
110 char *path;
111 u32 flags;
112
113 ACPI_FUNCTION_TRACE_PTR(ds_load1_begin_op, walk_state->op);
114
115 op = walk_state->op;
116 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
117 walk_state));
118
119 /* We are only interested in opcodes that have an associated name */
120
121 if (op) {
122 if (!(walk_state->op_info->flags & AML_NAMED)) {
123 *out_op = op;
124 return_ACPI_STATUS(AE_OK);
125 }
126
127 /* Check if this object has already been installed in the namespace */
128
129 if (op->common.node) {
130 *out_op = op;
131 return_ACPI_STATUS(AE_OK);
132 }
133 }
134
135 path = acpi_ps_get_next_namestring(&walk_state->parser_state);
136
137 /* Map the raw opcode into an internal object type */
138
139 object_type = walk_state->op_info->object_type;
140
141 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
142 "State=%p Op=%p [%s]\n", walk_state, op,
143 acpi_ut_get_type_name(object_type)));
144
145 switch (walk_state->opcode) {
146 case AML_SCOPE_OP:
147 /*
148 * The target name of the Scope() operator must exist at this point so
149 * that we can actually open the scope to enter new names underneath it.
150 * Allow search-to-root for single namesegs.
151 */
152 status =
153 acpi_ns_lookup(walk_state->scope_info, path, object_type,
154 ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
155 walk_state, &(node));
156 #ifdef ACPI_ASL_COMPILER
157 if (status == AE_NOT_FOUND) {
158 /*
159 * Table disassembly:
160 * Target of Scope() not found. Generate an External for it, and
161 * insert the name into the namespace.
162 */
163 acpi_dm_add_op_to_external_list(op, path,
164 ACPI_TYPE_DEVICE, 0, 0);
165 status =
166 acpi_ns_lookup(walk_state->scope_info, path,
167 object_type, ACPI_IMODE_LOAD_PASS1,
168 ACPI_NS_SEARCH_PARENT, walk_state,
169 &node);
170 }
171 #endif
172 if (ACPI_FAILURE(status)) {
173 ACPI_ERROR_NAMESPACE(walk_state->scope_info, path,
174 status);
175 return_ACPI_STATUS(status);
176 }
177
178 /*
179 * Check to make sure that the target is
180 * one of the opcodes that actually opens a scope
181 */
182 switch (node->type) {
183 case ACPI_TYPE_ANY:
184 case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
185 case ACPI_TYPE_DEVICE:
186 case ACPI_TYPE_POWER:
187 case ACPI_TYPE_PROCESSOR:
188 case ACPI_TYPE_THERMAL:
189
190 /* These are acceptable types */
191 break;
192
193 case ACPI_TYPE_INTEGER:
194 case ACPI_TYPE_STRING:
195 case ACPI_TYPE_BUFFER:
196 /*
197 * These types we will allow, but we will change the type.
198 * This enables some existing code of the form:
199 *
200 * Name (DEB, 0)
201 * Scope (DEB) { ... }
202 *
203 * Note: silently change the type here. On the second pass,
204 * we will report a warning
205 */
206 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
207 "Type override - [%4.4s] had invalid type (%s) "
208 "for Scope operator, changed to type ANY\n",
209 acpi_ut_get_node_name(node),
210 acpi_ut_get_type_name(node->type)));
211
212 node->type = ACPI_TYPE_ANY;
213 walk_state->scope_info->common.value = ACPI_TYPE_ANY;
214 break;
215
216 case ACPI_TYPE_METHOD:
217 /*
218 * Allow scope change to root during execution of module-level
219 * code. Root is typed METHOD during this time.
220 */
221 if ((node == acpi_gbl_root_node) &&
222 (walk_state->
223 parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
224 break;
225 }
226
227 ACPI_FALLTHROUGH;
228
229 default:
230
231 /* All other types are an error */
232
233 ACPI_ERROR((AE_INFO,
234 "Invalid type (%s) for target of "
235 "Scope operator [%4.4s] (Cannot override)",
236 acpi_ut_get_type_name(node->type),
237 acpi_ut_get_node_name(node)));
238
239 return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
240 }
241 break;
242
243 default:
244 /*
245 * For all other named opcodes, we will enter the name into
246 * the namespace.
247 *
248 * Setup the search flags.
249 * Since we are entering a name into the namespace, we do not want to
250 * enable the search-to-root upsearch.
251 *
252 * There are only two conditions where it is acceptable that the name
253 * already exists:
254 * 1) the Scope() operator can reopen a scoping object that was
255 * previously defined (Scope, Method, Device, etc.)
256 * 2) Whenever we are parsing a deferred opcode (op_region, Buffer,
257 * buffer_field, or Package), the name of the object is already
258 * in the namespace.
259 */
260 if (walk_state->deferred_node) {
261
262 /* This name is already in the namespace, get the node */
263
264 node = walk_state->deferred_node;
265 status = AE_OK;
266 break;
267 }
268
269 /*
270 * If we are executing a method, do not create any namespace objects
271 * during the load phase, only during execution.
272 */
273 if (walk_state->method_node) {
274 node = NULL;
275 status = AE_OK;
276 break;
277 }
278
279 flags = ACPI_NS_NO_UPSEARCH;
280 if ((walk_state->opcode != AML_SCOPE_OP) &&
281 (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
282 if (walk_state->namespace_override) {
283 flags |= ACPI_NS_OVERRIDE_IF_FOUND;
284 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
285 "[%s] Override allowed\n",
286 acpi_ut_get_type_name
287 (object_type)));
288 } else {
289 flags |= ACPI_NS_ERROR_IF_FOUND;
290 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
291 "[%s] Cannot already exist\n",
292 acpi_ut_get_type_name
293 (object_type)));
294 }
295 } else {
296 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
297 "[%s] Both Find or Create allowed\n",
298 acpi_ut_get_type_name(object_type)));
299 }
300
301 /*
302 * Enter the named type into the internal namespace. We enter the name
303 * as we go downward in the parse tree. Any necessary subobjects that
304 * involve arguments to the opcode must be created as we go back up the
305 * parse tree later.
306 */
307 status =
308 acpi_ns_lookup(walk_state->scope_info, path, object_type,
309 ACPI_IMODE_LOAD_PASS1, flags, walk_state,
310 &node);
311 if (ACPI_FAILURE(status)) {
312 if (status == AE_ALREADY_EXISTS) {
313
314 /* The name already exists in this scope */
315
316 if (node->flags & ANOBJ_IS_EXTERNAL) {
317 /*
318 * Allow one create on an object or segment that was
319 * previously declared External
320 */
321 node->flags &= ~ANOBJ_IS_EXTERNAL;
322 node->type = (u8) object_type;
323
324 /* Just retyped a node, probably will need to open a scope */
325
326 if (acpi_ns_opens_scope(object_type)) {
327 status =
328 acpi_ds_scope_stack_push
329 (node, object_type,
330 walk_state);
331 if (ACPI_FAILURE(status)) {
332 return_ACPI_STATUS
333 (status);
334 }
335 }
336
337 status = AE_OK;
338 }
339 }
340
341 if (ACPI_FAILURE(status)) {
342 ACPI_ERROR_NAMESPACE(walk_state->scope_info,
343 path, status);
344 return_ACPI_STATUS(status);
345 }
346 }
347 break;
348 }
349
350 /* Common exit */
351
352 if (!op) {
353
354 /* Create a new op */
355
356 op = acpi_ps_alloc_op(walk_state->opcode, walk_state->aml);
357 if (!op) {
358 return_ACPI_STATUS(AE_NO_MEMORY);
359 }
360 }
361
362 /* Initialize the op */
363
364 #ifdef ACPI_CONSTANT_EVAL_ONLY
365 op->named.path = path;
366 #endif
367
368 if (node) {
369 /*
370 * Put the Node in the "op" object that the parser uses, so we
371 * can get it again quickly when this scope is closed
372 */
373 op->common.node = node;
374 op->named.name = node->name.integer;
375 }
376
377 acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
378 op);
379 *out_op = op;
380 return_ACPI_STATUS(status);
381 }
382
383 /*******************************************************************************
384 *
385 * FUNCTION: acpi_ds_load1_end_op
386 *
387 * PARAMETERS: walk_state - Current state of the parse tree walk
388 *
389 * RETURN: Status
390 *
391 * DESCRIPTION: Ascending callback used during the loading of the namespace,
392 * both control methods and everything else.
393 *
394 ******************************************************************************/
395
acpi_ds_load1_end_op(struct acpi_walk_state * walk_state)396 acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
397 {
398 union acpi_parse_object *op;
399 acpi_object_type object_type;
400 acpi_status status = AE_OK;
401 #ifdef ACPI_ASL_COMPILER
402 u8 param_count;
403 #endif
404
405 ACPI_FUNCTION_TRACE(ds_load1_end_op);
406
407 op = walk_state->op;
408 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
409 walk_state));
410
411 /*
412 * Disassembler: handle create field operators here.
413 *
414 * create_buffer_field is a deferred op that is typically processed in load
415 * pass 2. However, disassembly of control method contents walk the parse
416 * tree with ACPI_PARSE_LOAD_PASS1 and AML_CREATE operators are processed
417 * in a later walk. This is a problem when there is a control method that
418 * has the same name as the AML_CREATE object. In this case, any use of the
419 * name segment will be detected as a method call rather than a reference
420 * to a buffer field.
421 *
422 * This earlier creation during disassembly solves this issue by inserting
423 * the named object in the ACPI namespace so that references to this name
424 * would be a name string rather than a method call.
425 */
426 if ((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) &&
427 (walk_state->op_info->flags & AML_CREATE)) {
428 status = acpi_ds_create_buffer_field(op, walk_state);
429 return_ACPI_STATUS(status);
430 }
431
432 /* We are only interested in opcodes that have an associated name */
433
434 if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
435 return_ACPI_STATUS(AE_OK);
436 }
437
438 /* Get the object type to determine if we should pop the scope */
439
440 object_type = walk_state->op_info->object_type;
441
442 if (walk_state->op_info->flags & AML_FIELD) {
443 /*
444 * If we are executing a method, do not create any namespace objects
445 * during the load phase, only during execution.
446 */
447 if (!walk_state->method_node) {
448 if (walk_state->opcode == AML_FIELD_OP ||
449 walk_state->opcode == AML_BANK_FIELD_OP ||
450 walk_state->opcode == AML_INDEX_FIELD_OP) {
451 status =
452 acpi_ds_init_field_objects(op, walk_state);
453 }
454 }
455 return_ACPI_STATUS(status);
456 }
457
458 /*
459 * If we are executing a method, do not create any namespace objects
460 * during the load phase, only during execution.
461 */
462 if (!walk_state->method_node) {
463 if (op->common.aml_opcode == AML_REGION_OP) {
464 status =
465 acpi_ex_create_region(op->named.data,
466 op->named.length,
467 (acpi_adr_space_type)
468 ((op->common.value.arg)->
469 common.value.integer),
470 walk_state);
471 if (ACPI_FAILURE(status)) {
472 return_ACPI_STATUS(status);
473 }
474 } else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
475 status =
476 acpi_ex_create_region(op->named.data,
477 op->named.length,
478 ACPI_ADR_SPACE_DATA_TABLE,
479 walk_state);
480 if (ACPI_FAILURE(status)) {
481 return_ACPI_STATUS(status);
482 }
483 }
484 }
485
486 if (op->common.aml_opcode == AML_NAME_OP) {
487
488 /* For Name opcode, get the object type from the argument */
489
490 if (op->common.value.arg) {
491 object_type = (acpi_ps_get_opcode_info((op->common.
492 value.arg)->
493 common.
494 aml_opcode))->
495 object_type;
496
497 /* Set node type if we have a namespace node */
498
499 if (op->common.node) {
500 op->common.node->type = (u8) object_type;
501 }
502 }
503 }
504 #ifdef ACPI_ASL_COMPILER
505 /*
506 * For external opcode, get the object type from the argument and
507 * get the parameter count from the argument's next.
508 */
509 if (acpi_gbl_disasm_flag &&
510 op->common.node && op->common.aml_opcode == AML_EXTERNAL_OP) {
511 /*
512 * Note, if this external is not a method
513 * Op->Common.Value.Arg->Common.Next->Common.Value.Integer == 0
514 * Therefore, param_count will be 0.
515 */
516 param_count =
517 (u8)op->common.value.arg->common.next->common.value.integer;
518 object_type = (u8)op->common.value.arg->common.value.integer;
519 op->common.node->flags |= ANOBJ_IS_EXTERNAL;
520 op->common.node->type = (u8)object_type;
521
522 acpi_dm_create_subobject_for_external((u8)object_type,
523 &op->common.node,
524 param_count);
525
526 /*
527 * Add the external to the external list because we may be
528 * emitting code based off of the items within the external list.
529 */
530 acpi_dm_add_op_to_external_list(op, op->named.path,
531 (u8)object_type, param_count,
532 ACPI_EXT_ORIGIN_FROM_OPCODE |
533 ACPI_EXT_RESOLVED_REFERENCE);
534 }
535 #endif
536
537 /*
538 * If we are executing a method, do not create any namespace objects
539 * during the load phase, only during execution.
540 */
541 if (!walk_state->method_node) {
542 if (op->common.aml_opcode == AML_METHOD_OP) {
543 /*
544 * method_op pkg_length name_string method_flags term_list
545 *
546 * Note: We must create the method node/object pair as soon as we
547 * see the method declaration. This allows later pass1 parsing
548 * of invocations of the method (need to know the number of
549 * arguments.)
550 */
551 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
552 "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
553 walk_state, op, op->named.node));
554
555 if (!acpi_ns_get_attached_object(op->named.node)) {
556 walk_state->operands[0] =
557 ACPI_CAST_PTR(void, op->named.node);
558 walk_state->num_operands = 1;
559
560 status =
561 acpi_ds_create_operands(walk_state,
562 op->common.value.
563 arg);
564 if (ACPI_SUCCESS(status)) {
565 status =
566 acpi_ex_create_method(op->named.
567 data,
568 op->named.
569 length,
570 walk_state);
571 }
572
573 walk_state->operands[0] = NULL;
574 walk_state->num_operands = 0;
575
576 if (ACPI_FAILURE(status)) {
577 return_ACPI_STATUS(status);
578 }
579 }
580 }
581 }
582
583 /* Pop the scope stack (only if loading a table) */
584
585 if (!walk_state->method_node &&
586 op->common.aml_opcode != AML_EXTERNAL_OP &&
587 acpi_ns_opens_scope(object_type)) {
588 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
589 "(%s): Popping scope for Op %p\n",
590 acpi_ut_get_type_name(object_type), op));
591
592 status = acpi_ds_scope_stack_pop(walk_state);
593 }
594
595 return_ACPI_STATUS(status);
596 }
597