1 /* 2 * Generic linux-input device driver for keyboard devices 3 * 4 * Copyright (c) 2001 Brian S. Julin 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * Alternatively, this software may be distributed under the terms of the 17 * GNU General Public License ("GPL"). 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * 29 * References: 30 * HP-HIL Technical Reference Manual. Hewlett Packard Product No. 45918A 31 * 32 */ 33 34 #include <linux/hil.h> 35 #include <linux/input.h> 36 #include <linux/serio.h> 37 #include <linux/kernel.h> 38 #include <linux/module.h> 39 #include <linux/completion.h> 40 #include <linux/slab.h> 41 #include <linux/pci_ids.h> 42 43 #define PREFIX "HIL: " 44 45 MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>"); 46 MODULE_DESCRIPTION("HIL keyboard/mouse driver"); 47 MODULE_LICENSE("Dual BSD/GPL"); 48 MODULE_ALIAS("serio:ty03pr25id00ex*"); /* HIL keyboard */ 49 MODULE_ALIAS("serio:ty03pr25id0Fex*"); /* HIL mouse */ 50 51 #define HIL_PACKET_MAX_LENGTH 16 52 53 #define HIL_KBD_SET1_UPBIT 0x01 54 #define HIL_KBD_SET1_SHIFT 1 55 static unsigned int hil_kbd_set1[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly = 56 { HIL_KEYCODES_SET1 }; 57 58 #define HIL_KBD_SET2_UPBIT 0x01 59 #define HIL_KBD_SET2_SHIFT 1 60 /* Set2 is user defined */ 61 62 #define HIL_KBD_SET3_UPBIT 0x80 63 #define HIL_KBD_SET3_SHIFT 0 64 static unsigned int hil_kbd_set3[HIL_KEYCODES_SET3_TBLSIZE] __read_mostly = 65 { HIL_KEYCODES_SET3 }; 66 67 static const char hil_language[][16] = { HIL_LOCALE_MAP }; 68 69 struct hil_dev { 70 struct input_dev *dev; 71 struct serio *serio; 72 73 /* Input buffer and index for packets from HIL bus. */ 74 hil_packet data[HIL_PACKET_MAX_LENGTH]; 75 int idx4; /* four counts per packet */ 76 77 /* Raw device info records from HIL bus, see hil.h for fields. */ 78 char idd[HIL_PACKET_MAX_LENGTH]; /* DID byte and IDD record */ 79 char rsc[HIL_PACKET_MAX_LENGTH]; /* RSC record */ 80 char exd[HIL_PACKET_MAX_LENGTH]; /* EXD record */ 81 char rnm[HIL_PACKET_MAX_LENGTH + 1]; /* RNM record + NULL term. */ 82 83 struct completion cmd_done; 84 85 bool is_pointer; 86 /* Extra device details needed for pointing devices. */ 87 unsigned int nbtn, naxes; 88 unsigned int btnmap[7]; 89 }; 90 hil_dev_is_command_response(hil_packet p)91 static bool hil_dev_is_command_response(hil_packet p) 92 { 93 if ((p & ~HIL_CMDCT_POL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_POL)) 94 return false; 95 96 if ((p & ~HIL_CMDCT_RPL) == (HIL_ERR_INT | HIL_PKT_CMD | HIL_CMD_RPL)) 97 return false; 98 99 return true; 100 } 101 hil_dev_handle_command_response(struct hil_dev * dev)102 static void hil_dev_handle_command_response(struct hil_dev *dev) 103 { 104 hil_packet p; 105 char *buf; 106 int i, idx; 107 108 idx = dev->idx4 / 4; 109 p = dev->data[idx - 1]; 110 111 switch (p & HIL_PKT_DATA_MASK) { 112 case HIL_CMD_IDD: 113 buf = dev->idd; 114 break; 115 116 case HIL_CMD_RSC: 117 buf = dev->rsc; 118 break; 119 120 case HIL_CMD_EXD: 121 buf = dev->exd; 122 break; 123 124 case HIL_CMD_RNM: 125 dev->rnm[HIL_PACKET_MAX_LENGTH] = 0; 126 buf = dev->rnm; 127 break; 128 129 default: 130 /* These occur when device isn't present */ 131 if (p != (HIL_ERR_INT | HIL_PKT_CMD)) { 132 /* Anything else we'd like to know about. */ 133 printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p); 134 } 135 goto out; 136 } 137 138 for (i = 0; i < idx; i++) 139 buf[i] = dev->data[i] & HIL_PKT_DATA_MASK; 140 for (; i < HIL_PACKET_MAX_LENGTH; i++) 141 buf[i] = 0; 142 out: 143 complete(&dev->cmd_done); 144 } 145 hil_dev_handle_kbd_events(struct hil_dev * kbd)146 static void hil_dev_handle_kbd_events(struct hil_dev *kbd) 147 { 148 struct input_dev *dev = kbd->dev; 149 int idx = kbd->idx4 / 4; 150 int i; 151 152 switch (kbd->data[0] & HIL_POL_CHARTYPE_MASK) { 153 case HIL_POL_CHARTYPE_NONE: 154 return; 155 156 case HIL_POL_CHARTYPE_ASCII: 157 for (i = 1; i < idx - 1; i++) 158 input_report_key(dev, kbd->data[i] & 0x7f, 1); 159 break; 160 161 case HIL_POL_CHARTYPE_RSVD1: 162 case HIL_POL_CHARTYPE_RSVD2: 163 case HIL_POL_CHARTYPE_BINARY: 164 for (i = 1; i < idx - 1; i++) 165 input_report_key(dev, kbd->data[i], 1); 166 break; 167 168 case HIL_POL_CHARTYPE_SET1: 169 for (i = 1; i < idx - 1; i++) { 170 unsigned int key = kbd->data[i]; 171 int up = key & HIL_KBD_SET1_UPBIT; 172 173 key &= (~HIL_KBD_SET1_UPBIT & 0xff); 174 key = hil_kbd_set1[key >> HIL_KBD_SET1_SHIFT]; 175 input_report_key(dev, key, !up); 176 } 177 break; 178 179 case HIL_POL_CHARTYPE_SET2: 180 for (i = 1; i < idx - 1; i++) { 181 unsigned int key = kbd->data[i]; 182 int up = key & HIL_KBD_SET2_UPBIT; 183 184 key &= (~HIL_KBD_SET1_UPBIT & 0xff); 185 key = key >> HIL_KBD_SET2_SHIFT; 186 input_report_key(dev, key, !up); 187 } 188 break; 189 190 case HIL_POL_CHARTYPE_SET3: 191 for (i = 1; i < idx - 1; i++) { 192 unsigned int key = kbd->data[i]; 193 int up = key & HIL_KBD_SET3_UPBIT; 194 195 key &= (~HIL_KBD_SET1_UPBIT & 0xff); 196 key = hil_kbd_set3[key >> HIL_KBD_SET3_SHIFT]; 197 input_report_key(dev, key, !up); 198 } 199 break; 200 } 201 202 input_sync(dev); 203 } 204 hil_dev_handle_ptr_events(struct hil_dev * ptr)205 static void hil_dev_handle_ptr_events(struct hil_dev *ptr) 206 { 207 struct input_dev *dev = ptr->dev; 208 int idx = ptr->idx4 / 4; 209 hil_packet p = ptr->data[idx - 1]; 210 int i, cnt, laxis; 211 bool absdev, ax16; 212 213 if ((p & HIL_CMDCT_POL) != idx - 1) { 214 printk(KERN_WARNING PREFIX 215 "Malformed poll packet %x (idx = %i)\n", p, idx); 216 return; 217 } 218 219 i = (p & HIL_POL_AXIS_ALT) ? 3 : 0; 220 laxis = (p & HIL_POL_NUM_AXES_MASK) + i; 221 222 ax16 = ptr->idd[1] & HIL_IDD_HEADER_16BIT; /* 8 or 16bit resolution */ 223 absdev = ptr->idd[1] & HIL_IDD_HEADER_ABS; 224 225 for (cnt = 1; i < laxis; i++) { 226 unsigned int lo, hi, val; 227 228 lo = ptr->data[cnt++] & HIL_PKT_DATA_MASK; 229 hi = ax16 ? (ptr->data[cnt++] & HIL_PKT_DATA_MASK) : 0; 230 231 if (absdev) { 232 val = lo + (hi << 8); 233 #ifdef TABLET_AUTOADJUST 234 if (val < input_abs_get_min(dev, ABS_X + i)) 235 input_abs_set_min(dev, ABS_X + i, val); 236 if (val > input_abs_get_max(dev, ABS_X + i)) 237 input_abs_set_max(dev, ABS_X + i, val); 238 #endif 239 if (i % 3) 240 val = input_abs_get_max(dev, ABS_X + i) - val; 241 input_report_abs(dev, ABS_X + i, val); 242 } else { 243 val = (int) (((int8_t) lo) | ((int8_t) hi << 8)); 244 if (i % 3) 245 val *= -1; 246 input_report_rel(dev, REL_X + i, val); 247 } 248 } 249 250 while (cnt < idx - 1) { 251 unsigned int btn = ptr->data[cnt++]; 252 int up = btn & 1; 253 254 btn &= 0xfe; 255 if (btn == 0x8e) 256 continue; /* TODO: proximity == touch? */ 257 if (btn > 0x8c || btn < 0x80) 258 continue; 259 btn = (btn - 0x80) >> 1; 260 btn = ptr->btnmap[btn]; 261 input_report_key(dev, btn, !up); 262 } 263 264 input_sync(dev); 265 } 266 hil_dev_process_err(struct hil_dev * dev)267 static void hil_dev_process_err(struct hil_dev *dev) 268 { 269 printk(KERN_WARNING PREFIX "errored HIL packet\n"); 270 dev->idx4 = 0; 271 complete(&dev->cmd_done); /* just in case somebody is waiting */ 272 } 273 hil_dev_interrupt(struct serio * serio,unsigned char data,unsigned int flags)274 static irqreturn_t hil_dev_interrupt(struct serio *serio, 275 unsigned char data, unsigned int flags) 276 { 277 struct hil_dev *dev; 278 hil_packet packet; 279 int idx; 280 281 dev = serio_get_drvdata(serio); 282 BUG_ON(dev == NULL); 283 284 if (dev->idx4 >= HIL_PACKET_MAX_LENGTH * sizeof(hil_packet)) { 285 hil_dev_process_err(dev); 286 goto out; 287 } 288 289 idx = dev->idx4 / 4; 290 if (!(dev->idx4 % 4)) 291 dev->data[idx] = 0; 292 packet = dev->data[idx]; 293 packet |= ((hil_packet)data) << ((3 - (dev->idx4 % 4)) * 8); 294 dev->data[idx] = packet; 295 296 /* Records of N 4-byte hil_packets must terminate with a command. */ 297 if ((++dev->idx4 % 4) == 0) { 298 if ((packet & 0xffff0000) != HIL_ERR_INT) { 299 hil_dev_process_err(dev); 300 } else if (packet & HIL_PKT_CMD) { 301 if (hil_dev_is_command_response(packet)) 302 hil_dev_handle_command_response(dev); 303 else if (dev->is_pointer) 304 hil_dev_handle_ptr_events(dev); 305 else 306 hil_dev_handle_kbd_events(dev); 307 dev->idx4 = 0; 308 } 309 } 310 out: 311 return IRQ_HANDLED; 312 } 313 hil_dev_disconnect(struct serio * serio)314 static void hil_dev_disconnect(struct serio *serio) 315 { 316 struct hil_dev *dev = serio_get_drvdata(serio); 317 318 BUG_ON(dev == NULL); 319 320 serio_close(serio); 321 input_unregister_device(dev->dev); 322 serio_set_drvdata(serio, NULL); 323 kfree(dev); 324 } 325 hil_dev_keyboard_setup(struct hil_dev * kbd)326 static void hil_dev_keyboard_setup(struct hil_dev *kbd) 327 { 328 struct input_dev *input_dev = kbd->dev; 329 uint8_t did = kbd->idd[0]; 330 int i; 331 332 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); 333 input_dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | 334 BIT_MASK(LED_SCROLLL); 335 336 for (i = 0; i < 128; i++) { 337 __set_bit(hil_kbd_set1[i], input_dev->keybit); 338 __set_bit(hil_kbd_set3[i], input_dev->keybit); 339 } 340 __clear_bit(KEY_RESERVED, input_dev->keybit); 341 342 input_dev->keycodemax = HIL_KEYCODES_SET1_TBLSIZE; 343 input_dev->keycodesize = sizeof(hil_kbd_set1[0]); 344 input_dev->keycode = hil_kbd_set1; 345 346 input_dev->name = strlen(kbd->rnm) ? kbd->rnm : "HIL keyboard"; 347 input_dev->phys = "hpkbd/input0"; 348 349 printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n", 350 did, hil_language[did & HIL_IDD_DID_TYPE_KB_LANG_MASK]); 351 } 352 hil_dev_pointer_setup(struct hil_dev * ptr)353 static void hil_dev_pointer_setup(struct hil_dev *ptr) 354 { 355 struct input_dev *input_dev = ptr->dev; 356 uint8_t did = ptr->idd[0]; 357 uint8_t *idd = ptr->idd + 1; 358 unsigned int naxsets = HIL_IDD_NUM_AXSETS(*idd); 359 unsigned int i, btntype; 360 const char *txt; 361 362 ptr->naxes = HIL_IDD_NUM_AXES_PER_SET(*idd); 363 364 switch (did & HIL_IDD_DID_TYPE_MASK) { 365 case HIL_IDD_DID_TYPE_REL: 366 input_dev->evbit[0] = BIT_MASK(EV_REL); 367 368 for (i = 0; i < ptr->naxes; i++) 369 __set_bit(REL_X + i, input_dev->relbit); 370 371 for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++) 372 __set_bit(REL_X + i, input_dev->relbit); 373 374 txt = "relative"; 375 break; 376 377 case HIL_IDD_DID_TYPE_ABS: 378 input_dev->evbit[0] = BIT_MASK(EV_ABS); 379 380 for (i = 0; i < ptr->naxes; i++) 381 input_set_abs_params(input_dev, ABS_X + i, 382 0, HIL_IDD_AXIS_MAX(idd, i), 0, 0); 383 384 for (i = 3; naxsets > 1 && i < ptr->naxes + 3; i++) 385 input_set_abs_params(input_dev, ABS_X + i, 386 0, HIL_IDD_AXIS_MAX(idd, i - 3), 0, 0); 387 388 #ifdef TABLET_AUTOADJUST 389 for (i = 0; i < ABS_MAX; i++) { 390 int diff = input_abs_get_max(input_dev, ABS_X + i) / 10; 391 input_abs_set_min(input_dev, ABS_X + i, 392 input_abs_get_min(input_dev, ABS_X + i) + diff); 393 input_abs_set_max(input_dev, ABS_X + i, 394 input_abs_get_max(input_dev, ABS_X + i) - diff); 395 } 396 #endif 397 398 txt = "absolute"; 399 break; 400 401 default: 402 BUG(); 403 } 404 405 ptr->nbtn = HIL_IDD_NUM_BUTTONS(idd); 406 if (ptr->nbtn) 407 input_dev->evbit[0] |= BIT_MASK(EV_KEY); 408 409 btntype = BTN_MISC; 410 if ((did & HIL_IDD_DID_ABS_TABLET_MASK) == HIL_IDD_DID_ABS_TABLET) 411 #ifdef TABLET_SIMULATES_MOUSE 412 btntype = BTN_TOUCH; 413 #else 414 btntype = BTN_DIGI; 415 #endif 416 if ((did & HIL_IDD_DID_ABS_TSCREEN_MASK) == HIL_IDD_DID_ABS_TSCREEN) 417 btntype = BTN_TOUCH; 418 419 if ((did & HIL_IDD_DID_REL_MOUSE_MASK) == HIL_IDD_DID_REL_MOUSE) 420 btntype = BTN_MOUSE; 421 422 for (i = 0; i < ptr->nbtn; i++) { 423 __set_bit(btntype | i, input_dev->keybit); 424 ptr->btnmap[i] = btntype | i; 425 } 426 427 if (btntype == BTN_MOUSE) { 428 /* Swap buttons 2 and 3 */ 429 ptr->btnmap[1] = BTN_MIDDLE; 430 ptr->btnmap[2] = BTN_RIGHT; 431 } 432 433 input_dev->name = strlen(ptr->rnm) ? ptr->rnm : "HIL pointer device"; 434 435 printk(KERN_INFO PREFIX 436 "HIL pointer device found (did: 0x%02x, axis: %s)\n", 437 did, txt); 438 printk(KERN_INFO PREFIX 439 "HIL pointer has %i buttons and %i sets of %i axes\n", 440 ptr->nbtn, naxsets, ptr->naxes); 441 } 442 hil_dev_connect(struct serio * serio,struct serio_driver * drv)443 static int hil_dev_connect(struct serio *serio, struct serio_driver *drv) 444 { 445 struct hil_dev *dev; 446 struct input_dev *input_dev; 447 uint8_t did, *idd; 448 int error; 449 450 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 451 input_dev = input_allocate_device(); 452 if (!dev || !input_dev) { 453 error = -ENOMEM; 454 goto bail0; 455 } 456 457 dev->serio = serio; 458 dev->dev = input_dev; 459 460 error = serio_open(serio, drv); 461 if (error) 462 goto bail0; 463 464 serio_set_drvdata(serio, dev); 465 466 /* Get device info. MLC driver supplies devid/status/etc. */ 467 init_completion(&dev->cmd_done); 468 serio_write(serio, 0); 469 serio_write(serio, 0); 470 serio_write(serio, HIL_PKT_CMD >> 8); 471 serio_write(serio, HIL_CMD_IDD); 472 error = wait_for_completion_killable(&dev->cmd_done); 473 if (error) 474 goto bail1; 475 476 reinit_completion(&dev->cmd_done); 477 serio_write(serio, 0); 478 serio_write(serio, 0); 479 serio_write(serio, HIL_PKT_CMD >> 8); 480 serio_write(serio, HIL_CMD_RSC); 481 error = wait_for_completion_killable(&dev->cmd_done); 482 if (error) 483 goto bail1; 484 485 reinit_completion(&dev->cmd_done); 486 serio_write(serio, 0); 487 serio_write(serio, 0); 488 serio_write(serio, HIL_PKT_CMD >> 8); 489 serio_write(serio, HIL_CMD_RNM); 490 error = wait_for_completion_killable(&dev->cmd_done); 491 if (error) 492 goto bail1; 493 494 reinit_completion(&dev->cmd_done); 495 serio_write(serio, 0); 496 serio_write(serio, 0); 497 serio_write(serio, HIL_PKT_CMD >> 8); 498 serio_write(serio, HIL_CMD_EXD); 499 error = wait_for_completion_killable(&dev->cmd_done); 500 if (error) 501 goto bail1; 502 503 did = dev->idd[0]; 504 idd = dev->idd + 1; 505 506 switch (did & HIL_IDD_DID_TYPE_MASK) { 507 case HIL_IDD_DID_TYPE_KB_INTEGRAL: 508 case HIL_IDD_DID_TYPE_KB_ITF: 509 case HIL_IDD_DID_TYPE_KB_RSVD: 510 case HIL_IDD_DID_TYPE_CHAR: 511 if (HIL_IDD_NUM_BUTTONS(idd) || 512 HIL_IDD_NUM_AXES_PER_SET(*idd)) { 513 printk(KERN_INFO PREFIX 514 "combo devices are not supported.\n"); 515 error = -EINVAL; 516 goto bail1; 517 } 518 519 dev->is_pointer = false; 520 hil_dev_keyboard_setup(dev); 521 break; 522 523 case HIL_IDD_DID_TYPE_REL: 524 case HIL_IDD_DID_TYPE_ABS: 525 dev->is_pointer = true; 526 hil_dev_pointer_setup(dev); 527 break; 528 529 default: 530 goto bail1; 531 } 532 533 input_dev->id.bustype = BUS_HIL; 534 input_dev->id.vendor = PCI_VENDOR_ID_HP; 535 input_dev->id.product = 0x0001; /* TODO: get from kbd->rsc */ 536 input_dev->id.version = 0x0100; /* TODO: get from kbd->rsc */ 537 input_dev->dev.parent = &serio->dev; 538 539 if (!dev->is_pointer) { 540 serio_write(serio, 0); 541 serio_write(serio, 0); 542 serio_write(serio, HIL_PKT_CMD >> 8); 543 /* Enable Keyswitch Autorepeat 1 */ 544 serio_write(serio, HIL_CMD_EK1); 545 /* No need to wait for completion */ 546 } 547 548 error = input_register_device(input_dev); 549 if (error) 550 goto bail1; 551 552 return 0; 553 554 bail1: 555 serio_close(serio); 556 serio_set_drvdata(serio, NULL); 557 bail0: 558 input_free_device(input_dev); 559 kfree(dev); 560 return error; 561 } 562 563 static const struct serio_device_id hil_dev_ids[] = { 564 { 565 .type = SERIO_HIL_MLC, 566 .proto = SERIO_HIL, 567 .id = SERIO_ANY, 568 .extra = SERIO_ANY, 569 }, 570 { 0 } 571 }; 572 573 MODULE_DEVICE_TABLE(serio, hil_dev_ids); 574 575 static struct serio_driver hil_serio_drv = { 576 .driver = { 577 .name = "hil_dev", 578 }, 579 .description = "HP HIL keyboard/mouse/tablet driver", 580 .id_table = hil_dev_ids, 581 .connect = hil_dev_connect, 582 .disconnect = hil_dev_disconnect, 583 .interrupt = hil_dev_interrupt 584 }; 585 586 module_serio_driver(hil_serio_drv); 587