1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * Copyright (c) 2014 MediaTek Inc.
4  * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
5  */
6 
7 #ifndef __PINCTRL_MTK_COMMON_H
8 #define __PINCTRL_MTK_COMMON_H
9 
10 #include <linux/pinctrl/pinctrl.h>
11 #include <linux/regmap.h>
12 #include <linux/pinctrl/pinconf-generic.h>
13 
14 #include "mtk-eint.h"
15 
16 #define NO_EINT_SUPPORT    255
17 #define MT_EDGE_SENSITIVE           0
18 #define MT_LEVEL_SENSITIVE          1
19 #define EINT_DBNC_SET_DBNC_BITS     4
20 #define EINT_DBNC_RST_BIT           (0x1 << 1)
21 #define EINT_DBNC_SET_EN            (0x1 << 0)
22 
23 #define MTK_PINCTRL_NOT_SUPPORT	(0xffff)
24 
25 struct mtk_desc_function {
26 	const char *name;
27 	unsigned char muxval;
28 };
29 
30 struct mtk_desc_eint {
31 	unsigned char eintmux;
32 	unsigned char eintnum;
33 };
34 
35 struct mtk_desc_pin {
36 	struct pinctrl_pin_desc	pin;
37 	const struct mtk_desc_eint eint;
38 	const struct mtk_desc_function	*functions;
39 };
40 
41 #define MTK_PIN(_pin, _pad, _chip, _eint, ...)		\
42 	{							\
43 		.pin = _pin,					\
44 		.eint = _eint,					\
45 		.functions = (struct mtk_desc_function[]){	\
46 			__VA_ARGS__, { } },			\
47 	}
48 
49 #define MTK_EINT_FUNCTION(_eintmux, _eintnum)				\
50 	{							\
51 		.eintmux = _eintmux,					\
52 		.eintnum = _eintnum,					\
53 	}
54 
55 #define MTK_FUNCTION(_val, _name)				\
56 	{							\
57 		.muxval = _val,					\
58 		.name = _name,					\
59 	}
60 
61 #define SET_ADDR(x, y)  (x + (y->devdata->port_align))
62 #define CLR_ADDR(x, y)  (x + (y->devdata->port_align << 1))
63 
64 struct mtk_pinctrl_group {
65 	const char	*name;
66 	unsigned long	config;
67 	unsigned	pin;
68 };
69 
70 /**
71  * struct mtk_drv_group_desc - Provide driving group data.
72  * @max_drv: The maximum current of this group.
73  * @min_drv: The minimum current of this group.
74  * @low_bit: The lowest bit of this group.
75  * @high_bit: The highest bit of this group.
76  * @step: The step current of this group.
77  */
78 struct mtk_drv_group_desc {
79 	unsigned char min_drv;
80 	unsigned char max_drv;
81 	unsigned char low_bit;
82 	unsigned char high_bit;
83 	unsigned char step;
84 };
85 
86 #define MTK_DRV_GRP(_min, _max, _low, _high, _step)	\
87 	{	\
88 		.min_drv = _min,	\
89 		.max_drv = _max,	\
90 		.low_bit = _low,	\
91 		.high_bit = _high,	\
92 		.step = _step,		\
93 	}
94 
95 /**
96  * struct mtk_pin_drv_grp - Provide each pin driving info.
97  * @pin: The pin number.
98  * @offset: The offset of driving register for this pin.
99  * @bit: The bit of driving register for this pin.
100  * @grp: The group for this pin belongs to.
101  */
102 struct mtk_pin_drv_grp {
103 	unsigned short pin;
104 	unsigned short offset;
105 	unsigned char bit;
106 	unsigned char grp;
107 };
108 
109 #define MTK_PIN_DRV_GRP(_pin, _offset, _bit, _grp)	\
110 	{	\
111 		.pin = _pin,	\
112 		.offset = _offset,	\
113 		.bit = _bit,	\
114 		.grp = _grp,	\
115 	}
116 
117 /**
118  * struct mtk_pin_spec_pupd_set_samereg
119  * - For special pins' pull up/down setting which resides in same register
120  * @pin: The pin number.
121  * @offset: The offset of special pull up/down setting register.
122  * @pupd_bit: The pull up/down bit in this register.
123  * @r0_bit: The r0 bit of pull resistor.
124  * @r1_bit: The r1 bit of pull resistor.
125  */
126 struct mtk_pin_spec_pupd_set_samereg {
127 	unsigned short pin;
128 	unsigned short offset;
129 	unsigned char pupd_bit;
130 	unsigned char r1_bit;
131 	unsigned char r0_bit;
132 };
133 
134 #define MTK_PIN_PUPD_SPEC_SR(_pin, _offset, _pupd, _r1, _r0)	\
135 	{	\
136 		.pin = _pin,	\
137 		.offset = _offset,	\
138 		.pupd_bit = _pupd,	\
139 		.r1_bit = _r1,		\
140 		.r0_bit = _r0,		\
141 	}
142 
143 /**
144  * struct mtk_pin_ies_set - For special pins' ies and smt setting.
145  * @start: The start pin number of those special pins.
146  * @end: The end pin number of those special pins.
147  * @offset: The offset of special setting register.
148  * @bit: The bit of special setting register.
149  */
150 struct mtk_pin_ies_smt_set {
151 	unsigned short start;
152 	unsigned short end;
153 	unsigned short offset;
154 	unsigned char bit;
155 };
156 
157 #define MTK_PIN_IES_SMT_SPEC(_start, _end, _offset, _bit)	\
158 	{	\
159 		.start = _start,	\
160 		.end = _end,	\
161 		.bit = _bit,	\
162 		.offset = _offset,	\
163 	}
164 
165 struct mtk_eint_offsets {
166 	const char *name;
167 	unsigned int  stat;
168 	unsigned int  ack;
169 	unsigned int  mask;
170 	unsigned int  mask_set;
171 	unsigned int  mask_clr;
172 	unsigned int  sens;
173 	unsigned int  sens_set;
174 	unsigned int  sens_clr;
175 	unsigned int  soft;
176 	unsigned int  soft_set;
177 	unsigned int  soft_clr;
178 	unsigned int  pol;
179 	unsigned int  pol_set;
180 	unsigned int  pol_clr;
181 	unsigned int  dom_en;
182 	unsigned int  dbnc_ctrl;
183 	unsigned int  dbnc_set;
184 	unsigned int  dbnc_clr;
185 	u8  port_mask;
186 	u8  ports;
187 };
188 
189 /**
190  * struct mtk_pinctrl_devdata - Provide HW GPIO related data.
191  * @pins: An array describing all pins the pin controller affects.
192  * @npins: The number of entries in @pins.
193  *
194  * @grp_desc: The driving group info.
195  * @pin_drv_grp: The driving group for all pins.
196  * @spec_ies: Special pin setting for input enable
197  * @n_spec_ies: Number of entries in spec_ies
198  * @spec_pupd: Special pull up/down setting
199  * @n_spec_pupd: Number of entries in spec_pupd
200  * @spec_smt: Special pin setting for schmitt
201  * @n_spec_smt: Number of entries in spec_smt
202  * @spec_pull_set: Each SoC may have special pins for pull up/down setting,
203  *  these pins' pull setting are very different, they have separate pull
204  *  up/down bit, R0 and R1 resistor bit, so they need special pull setting.
205  *  If special setting is success, this should return 0, otherwise it should
206  *  return non-zero value.
207  * @spec_ies_smt_set: Some pins are irregular, their input enable and smt
208  * control register are discontinuous, but they are mapping together. That
209  * means when user set smt, input enable is set at the same time. So they
210  * also need special control. If special control is success, this should
211  * return 0, otherwise return non-zero value.
212  * @spec_pinmux_set: In some cases, there are two pinmux functions share
213  * the same value in the same segment of pinmux control register. If user
214  * want to use one of the two functions, they need an extra bit setting to
215  * select the right one.
216  * @spec_dir_set: In very few SoCs, direction control registers are not
217  * arranged continuously, they may be cut to parts. So they need special
218  * dir setting.
219  * @mt8365_set_clr_mode: In mt8365, some pins won't set correcty because they
220  * need to use the main R/W register to read/update/write the modes instead of
221  * the SET/CLR register.
222  *
223  * @dir_offset: The direction register offset.
224  * @pullen_offset: The pull-up/pull-down enable register offset.
225  * @pinmux_offset: The pinmux register offset.
226  *
227  * @type1_start: Some chips have two base addresses for pull select register,
228  *  that means some pins use the first address and others use the second. This
229  *  member record the start of pin number to use the second address.
230  * @type1_end: The end of pin number to use the second address.
231  *
232  * @port_shf: The shift between two registers.
233  * @port_mask: The mask of register.
234  * @port_align: Provide clear register and set register step.
235  */
236 struct mtk_pinctrl_devdata {
237 	const struct mtk_desc_pin	*pins;
238 	unsigned int				npins;
239 	const struct mtk_drv_group_desc	*grp_desc;
240 	unsigned int	n_grp_cls;
241 	const struct mtk_pin_drv_grp	*pin_drv_grp;
242 	unsigned int	n_pin_drv_grps;
243 	const struct mtk_pin_ies_smt_set *spec_ies;
244 	unsigned int n_spec_ies;
245 	const struct mtk_pin_spec_pupd_set_samereg *spec_pupd;
246 	unsigned int n_spec_pupd;
247 	const struct mtk_pin_ies_smt_set *spec_smt;
248 	unsigned int n_spec_smt;
249 	int (*spec_pull_set)(struct regmap *regmap,
250 			const struct mtk_pinctrl_devdata *devdata,
251 			unsigned int pin, bool isup, unsigned int r1r0);
252 	int (*spec_ies_smt_set)(struct regmap *reg,
253 			const struct mtk_pinctrl_devdata *devdata,
254 			unsigned int pin, int value, enum pin_config_param arg);
255 	void (*spec_pinmux_set)(struct regmap *reg, unsigned int pin,
256 			unsigned int mode);
257 	void (*spec_dir_set)(unsigned int *reg_addr, unsigned int pin);
258 	int (*mt8365_set_clr_mode)(struct regmap *regmap,
259 			unsigned int bit, unsigned int reg_pullen, unsigned int reg_pullsel,
260 			bool enable, bool isup);
261 	unsigned int dir_offset;
262 	unsigned int ies_offset;
263 	unsigned int smt_offset;
264 	unsigned int pullen_offset;
265 	unsigned int pullsel_offset;
266 	unsigned int drv_offset;
267 	unsigned int dout_offset;
268 	unsigned int din_offset;
269 	unsigned int pinmux_offset;
270 	unsigned short type1_start;
271 	unsigned short type1_end;
272 	unsigned char  port_shf;
273 	unsigned char  port_mask;
274 	unsigned char  port_align;
275 	struct mtk_eint_hw eint_hw;
276 	struct mtk_eint_regs *eint_regs;
277 	unsigned int mode_mask;
278 	unsigned int mode_per_reg;
279 	unsigned int mode_shf;
280 };
281 
282 struct mtk_pinctrl {
283 	struct regmap	*regmap1;
284 	struct regmap	*regmap2;
285 	struct pinctrl_desc pctl_desc;
286 	struct device           *dev;
287 	struct gpio_chip	*chip;
288 	struct mtk_pinctrl_group	*groups;
289 	unsigned			ngroups;
290 	const char          **grp_names;
291 	struct pinctrl_dev      *pctl_dev;
292 	const struct mtk_pinctrl_devdata  *devdata;
293 	struct mtk_eint *eint;
294 };
295 
296 int mtk_pctrl_init(struct platform_device *pdev,
297 		const struct mtk_pinctrl_devdata *data,
298 		struct regmap *regmap);
299 
300 int mtk_pctrl_common_probe(struct platform_device *pdev);
301 
302 int mtk_pctrl_spec_pull_set_samereg(struct regmap *regmap,
303 		const struct mtk_pinctrl_devdata *devdata,
304 		unsigned int pin, bool isup, unsigned int r1r0);
305 
306 int mtk_pconf_spec_set_ies_smt_range(struct regmap *regmap,
307 		const struct mtk_pinctrl_devdata *devdata,
308 		unsigned int pin, int value, enum pin_config_param arg);
309 
310 extern const struct dev_pm_ops mtk_eint_pm_ops;
311 
312 #endif /* __PINCTRL_MTK_COMMON_H */
313