xref: /openbmc/linux/arch/sparc/kernel/spiterrs.S (revision b2441318)
1/* SPDX-License-Identifier: GPL-2.0 */
2	/* We need to carefully read the error status, ACK the errors,
3	 * prevent recursive traps, and pass the information on to C
4	 * code for logging.
5	 *
6	 * We pass the AFAR in as-is, and we encode the status
7	 * information as described in asm-sparc64/sfafsr.h
8	 */
9	.type		__spitfire_access_error,#function
10__spitfire_access_error:
11	/* Disable ESTATE error reporting so that we do not take
12	 * recursive traps and RED state the processor.
13	 */
14	stxa		%g0, [%g0] ASI_ESTATE_ERROR_EN
15	membar		#Sync
16
17	mov		UDBE_UE, %g1
18	ldxa		[%g0] ASI_AFSR, %g4	! Get AFSR
19
20	/* __spitfire_cee_trap branches here with AFSR in %g4 and
21	 * UDBE_CE in %g1.  It only clears ESTATE_ERR_CE in the ESTATE
22	 * Error Enable register.
23	 */
24__spitfire_cee_trap_continue:
25	ldxa		[%g0] ASI_AFAR, %g5	! Get AFAR
26
27	rdpr		%tt, %g3
28	and		%g3, 0x1ff, %g3		! Paranoia
29	sllx		%g3, SFSTAT_TRAP_TYPE_SHIFT, %g3
30	or		%g4, %g3, %g4
31	rdpr		%tl, %g3
32	cmp		%g3, 1
33	mov		1, %g3
34	bleu		%xcc, 1f
35	 sllx		%g3, SFSTAT_TL_GT_ONE_SHIFT, %g3
36
37	or		%g4, %g3, %g4
38
39	/* Read in the UDB error register state, clearing the sticky
40	 * error bits as-needed.  We only clear them if the UE bit is
41	 * set.  Likewise, __spitfire_cee_trap below will only do so
42	 * if the CE bit is set.
43	 *
44	 * NOTE: UltraSparc-I/II have high and low UDB error
45	 *       registers, corresponding to the two UDB units
46	 *       present on those chips.  UltraSparc-IIi only
47	 *       has a single UDB, called "SDB" in the manual.
48	 *       For IIi the upper UDB register always reads
49	 *       as zero so for our purposes things will just
50	 *       work with the checks below.
51	 */
521:	ldxa		[%g0] ASI_UDBH_ERROR_R, %g3
53	and		%g3, 0x3ff, %g7		! Paranoia
54	sllx		%g7, SFSTAT_UDBH_SHIFT, %g7
55	or		%g4, %g7, %g4
56	andcc		%g3, %g1, %g3		! UDBE_UE or UDBE_CE
57	be,pn		%xcc, 1f
58	 nop
59	stxa		%g3, [%g0] ASI_UDB_ERROR_W
60	membar		#Sync
61
621:	mov		0x18, %g3
63	ldxa		[%g3] ASI_UDBL_ERROR_R, %g3
64	and		%g3, 0x3ff, %g7		! Paranoia
65	sllx		%g7, SFSTAT_UDBL_SHIFT, %g7
66	or		%g4, %g7, %g4
67	andcc		%g3, %g1, %g3		! UDBE_UE or UDBE_CE
68	be,pn		%xcc, 1f
69	 nop
70	mov		0x18, %g7
71	stxa		%g3, [%g7] ASI_UDB_ERROR_W
72	membar		#Sync
73
741:	/* Ok, now that we've latched the error state, clear the
75	 * sticky bits in the AFSR.
76	 */
77	stxa		%g4, [%g0] ASI_AFSR
78	membar		#Sync
79
80	rdpr		%tl, %g2
81	cmp		%g2, 1
82	rdpr		%pil, %g2
83	bleu,pt		%xcc, 1f
84	 wrpr		%g0, PIL_NORMAL_MAX, %pil
85
86	ba,pt		%xcc, etraptl1
87	 rd		%pc, %g7
88
89	ba,a,pt		%xcc, 2f
90	 nop
91
921:	ba,pt		%xcc, etrap_irq
93	 rd		%pc, %g7
94
952:
96#ifdef CONFIG_TRACE_IRQFLAGS
97	call	trace_hardirqs_off
98	 nop
99#endif
100	mov		%l4, %o1
101	mov		%l5, %o2
102	call		spitfire_access_error
103	 add		%sp, PTREGS_OFF, %o0
104	ba,a,pt		%xcc, rtrap
105	.size		__spitfire_access_error,.-__spitfire_access_error
106
107	/* This is the trap handler entry point for ECC correctable
108	 * errors.  They are corrected, but we listen for the trap so
109	 * that the event can be logged.
110	 *
111	 * Disrupting errors are either:
112	 * 1) single-bit ECC errors during UDB reads to system
113	 *    memory
114	 * 2) data parity errors during write-back events
115	 *
116	 * As far as I can make out from the manual, the CEE trap is
117	 * only for correctable errors during memory read accesses by
118	 * the front-end of the processor.
119	 *
120	 * The code below is only for trap level 1 CEE events, as it
121	 * is the only situation where we can safely record and log.
122	 * For trap level >1 we just clear the CE bit in the AFSR and
123	 * return.
124	 *
125	 * This is just like __spiftire_access_error above, but it
126	 * specifically handles correctable errors.  If an
127	 * uncorrectable error is indicated in the AFSR we will branch
128	 * directly above to __spitfire_access_error to handle it
129	 * instead.  Uncorrectable therefore takes priority over
130	 * correctable, and the error logging C code will notice this
131	 * case by inspecting the trap type.
132	 */
133	.type		__spitfire_cee_trap,#function
134__spitfire_cee_trap:
135	ldxa		[%g0] ASI_AFSR, %g4	! Get AFSR
136	mov		1, %g3
137	sllx		%g3, SFAFSR_UE_SHIFT, %g3
138	andcc		%g4, %g3, %g0		! Check for UE
139	bne,pn		%xcc, __spitfire_access_error
140	 nop
141
142	/* Ok, in this case we only have a correctable error.
143	 * Indicate we only wish to capture that state in register
144	 * %g1, and we only disable CE error reporting unlike UE
145	 * handling which disables all errors.
146	 */
147	ldxa		[%g0] ASI_ESTATE_ERROR_EN, %g3
148	andn		%g3, ESTATE_ERR_CE, %g3
149	stxa		%g3, [%g0] ASI_ESTATE_ERROR_EN
150	membar		#Sync
151
152	/* Preserve AFSR in %g4, indicate UDB state to capture in %g1 */
153	ba,pt		%xcc, __spitfire_cee_trap_continue
154	 mov		UDBE_CE, %g1
155	.size		__spitfire_cee_trap,.-__spitfire_cee_trap
156
157	.type		__spitfire_data_access_exception_tl1,#function
158__spitfire_data_access_exception_tl1:
159	rdpr		%pstate, %g4
160	wrpr		%g4, PSTATE_MG|PSTATE_AG, %pstate
161	mov		TLB_SFSR, %g3
162	mov		DMMU_SFAR, %g5
163	ldxa		[%g3] ASI_DMMU, %g4	! Get SFSR
164	ldxa		[%g5] ASI_DMMU, %g5	! Get SFAR
165	stxa		%g0, [%g3] ASI_DMMU	! Clear SFSR.FaultValid bit
166	membar		#Sync
167	rdpr		%tt, %g3
168	cmp		%g3, 0x80		! first win spill/fill trap
169	blu,pn		%xcc, 1f
170	 cmp		%g3, 0xff		! last win spill/fill trap
171	bgu,pn		%xcc, 1f
172	 nop
173	ba,pt		%xcc, winfix_dax
174	 rdpr		%tpc, %g3
1751:	sethi		%hi(109f), %g7
176	ba,pt		%xcc, etraptl1
177109:	 or		%g7, %lo(109b), %g7
178	mov		%l4, %o1
179	mov		%l5, %o2
180	call		spitfire_data_access_exception_tl1
181	 add		%sp, PTREGS_OFF, %o0
182	ba,a,pt		%xcc, rtrap
183	.size		__spitfire_data_access_exception_tl1,.-__spitfire_data_access_exception_tl1
184
185	.type		__spitfire_data_access_exception,#function
186__spitfire_data_access_exception:
187	rdpr		%pstate, %g4
188	wrpr		%g4, PSTATE_MG|PSTATE_AG, %pstate
189	mov		TLB_SFSR, %g3
190	mov		DMMU_SFAR, %g5
191	ldxa		[%g3] ASI_DMMU, %g4	! Get SFSR
192	ldxa		[%g5] ASI_DMMU, %g5	! Get SFAR
193	stxa		%g0, [%g3] ASI_DMMU	! Clear SFSR.FaultValid bit
194	membar		#Sync
195	sethi		%hi(109f), %g7
196	ba,pt		%xcc, etrap
197109:	 or		%g7, %lo(109b), %g7
198	mov		%l4, %o1
199	mov		%l5, %o2
200	call		spitfire_data_access_exception
201	 add		%sp, PTREGS_OFF, %o0
202	ba,a,pt		%xcc, rtrap
203	.size		__spitfire_data_access_exception,.-__spitfire_data_access_exception
204
205	.type		__spitfire_insn_access_exception_tl1,#function
206__spitfire_insn_access_exception_tl1:
207	rdpr		%pstate, %g4
208	wrpr		%g4, PSTATE_MG|PSTATE_AG, %pstate
209	mov		TLB_SFSR, %g3
210	ldxa		[%g3] ASI_IMMU, %g4	! Get SFSR
211	rdpr		%tpc, %g5		! IMMU has no SFAR, use TPC
212	stxa		%g0, [%g3] ASI_IMMU	! Clear FaultValid bit
213	membar		#Sync
214	sethi		%hi(109f), %g7
215	ba,pt		%xcc, etraptl1
216109:	 or		%g7, %lo(109b), %g7
217	mov		%l4, %o1
218	mov		%l5, %o2
219	call		spitfire_insn_access_exception_tl1
220	 add		%sp, PTREGS_OFF, %o0
221	ba,a,pt		%xcc, rtrap
222	.size		__spitfire_insn_access_exception_tl1,.-__spitfire_insn_access_exception_tl1
223
224	.type		__spitfire_insn_access_exception,#function
225__spitfire_insn_access_exception:
226	rdpr		%pstate, %g4
227	wrpr		%g4, PSTATE_MG|PSTATE_AG, %pstate
228	mov		TLB_SFSR, %g3
229	ldxa		[%g3] ASI_IMMU, %g4	! Get SFSR
230	rdpr		%tpc, %g5		! IMMU has no SFAR, use TPC
231	stxa		%g0, [%g3] ASI_IMMU	! Clear FaultValid bit
232	membar		#Sync
233	sethi		%hi(109f), %g7
234	ba,pt		%xcc, etrap
235109:	 or		%g7, %lo(109b), %g7
236	mov		%l4, %o1
237	mov		%l5, %o2
238	call		spitfire_insn_access_exception
239	 add		%sp, PTREGS_OFF, %o0
240	ba,a,pt		%xcc, rtrap
241	.size		__spitfire_insn_access_exception,.-__spitfire_insn_access_exception
242