1 // SPDX-License-Identifier: GPL-2.0
2 #include "radeonfb.h"
3
4 #include <linux/slab.h>
5
6 #include "../edid.h"
7
8 static const struct fb_var_screeninfo radeonfb_default_var = {
9 .xres = 640,
10 .yres = 480,
11 .xres_virtual = 640,
12 .yres_virtual = 480,
13 .bits_per_pixel = 8,
14 .red = { .length = 8 },
15 .green = { .length = 8 },
16 .blue = { .length = 8 },
17 .activate = FB_ACTIVATE_NOW,
18 .height = -1,
19 .width = -1,
20 .pixclock = 39721,
21 .left_margin = 40,
22 .right_margin = 24,
23 .upper_margin = 32,
24 .lower_margin = 11,
25 .hsync_len = 96,
26 .vsync_len = 2,
27 .vmode = FB_VMODE_NONINTERLACED
28 };
29
radeon_get_mon_name(int type)30 static char *radeon_get_mon_name(int type)
31 {
32 char *pret = NULL;
33
34 switch (type) {
35 case MT_NONE:
36 pret = "no";
37 break;
38 case MT_CRT:
39 pret = "CRT";
40 break;
41 case MT_DFP:
42 pret = "DFP";
43 break;
44 case MT_LCD:
45 pret = "LCD";
46 break;
47 case MT_CTV:
48 pret = "CTV";
49 break;
50 case MT_STV:
51 pret = "STV";
52 break;
53 }
54
55 return pret;
56 }
57
58
59 #if defined(CONFIG_PPC) || defined(CONFIG_SPARC)
60 /*
61 * Try to find monitor informations & EDID data out of the Open Firmware
62 * device-tree. This also contains some "hacks" to work around a few machine
63 * models with broken OF probing by hard-coding known EDIDs for some Mac
64 * laptops internal LVDS panel. (XXX: not done yet)
65 */
radeon_parse_montype_prop(struct device_node * dp,u8 ** out_EDID,int hdno)66 static int radeon_parse_montype_prop(struct device_node *dp, u8 **out_EDID,
67 int hdno)
68 {
69 static char *propnames[] = { "DFP,EDID", "LCD,EDID", "EDID",
70 "EDID1", "EDID2", NULL };
71 const u8 *pedid = NULL;
72 const u8 *pmt = NULL;
73 u8 *tmp;
74 int i, mt = MT_NONE;
75
76 pr_debug("analyzing OF properties...\n");
77 pmt = of_get_property(dp, "display-type", NULL);
78 if (!pmt)
79 return MT_NONE;
80 pr_debug("display-type: %s\n", pmt);
81 /* OF says "LCD" for DFP as well, we discriminate from the caller of this
82 * function
83 */
84 if (!strcmp(pmt, "LCD") || !strcmp(pmt, "DFP"))
85 mt = MT_DFP;
86 else if (!strcmp(pmt, "CRT"))
87 mt = MT_CRT;
88 else {
89 if (strcmp(pmt, "NONE") != 0)
90 printk(KERN_WARNING "radeonfb: Unknown OF display-type: %s\n",
91 pmt);
92 return MT_NONE;
93 }
94
95 for (i = 0; propnames[i] != NULL; ++i) {
96 pedid = of_get_property(dp, propnames[i], NULL);
97 if (pedid != NULL)
98 break;
99 }
100 /* We didn't find the EDID in the leaf node, some cards will actually
101 * put EDID1/EDID2 in the parent, look for these (typically M6 tipb).
102 * single-head cards have hdno == -1 and skip this step
103 */
104 if (pedid == NULL && dp->parent && (hdno != -1))
105 pedid = of_get_property(dp->parent,
106 (hdno == 0) ? "EDID1" : "EDID2", NULL);
107 if (pedid == NULL && dp->parent && (hdno == 0))
108 pedid = of_get_property(dp->parent, "EDID", NULL);
109 if (pedid == NULL)
110 return mt;
111
112 tmp = kmemdup(pedid, EDID_LENGTH, GFP_KERNEL);
113 if (!tmp)
114 return mt;
115 *out_EDID = tmp;
116 return mt;
117 }
118
radeon_probe_OF_head(struct radeonfb_info * rinfo,int head_no,u8 ** out_EDID)119 static int radeon_probe_OF_head(struct radeonfb_info *rinfo, int head_no,
120 u8 **out_EDID)
121 {
122 struct device_node *dp;
123
124 pr_debug("radeon_probe_OF_head\n");
125
126 dp = rinfo->of_node;
127 while (dp == NULL)
128 return MT_NONE;
129
130 if (rinfo->has_CRTC2) {
131 const char *pname;
132 int len, second = 0;
133
134 dp = dp->child;
135 do {
136 if (!dp)
137 return MT_NONE;
138 pname = of_get_property(dp, "name", NULL);
139 if (!pname)
140 return MT_NONE;
141 len = strlen(pname);
142 pr_debug("head: %s (letter: %c, head_no: %d)\n",
143 pname, pname[len-1], head_no);
144 if (pname[len-1] == 'A' && head_no == 0) {
145 int mt = radeon_parse_montype_prop(dp, out_EDID, 0);
146 /* Maybe check for LVDS_GEN_CNTL here ? I need to check out
147 * what OF does when booting with lid closed
148 */
149 if (mt == MT_DFP && rinfo->is_mobility)
150 mt = MT_LCD;
151 return mt;
152 } else if (pname[len-1] == 'B' && head_no == 1)
153 return radeon_parse_montype_prop(dp, out_EDID, 1);
154 second = 1;
155 dp = dp->sibling;
156 } while(!second);
157 } else {
158 if (head_no > 0)
159 return MT_NONE;
160 return radeon_parse_montype_prop(dp, out_EDID, -1);
161 }
162 return MT_NONE;
163 }
164 #endif /* CONFIG_PPC || CONFIG_SPARC */
165
166
radeon_get_panel_info_BIOS(struct radeonfb_info * rinfo)167 static int radeon_get_panel_info_BIOS(struct radeonfb_info *rinfo)
168 {
169 unsigned long tmp, tmp0;
170 char stmp[30];
171 int i;
172
173 if (!rinfo->bios_seg)
174 return 0;
175
176 if (!(tmp = BIOS_IN16(rinfo->fp_bios_start + 0x40))) {
177 printk(KERN_ERR "radeonfb: Failed to detect DFP panel info using BIOS\n");
178 rinfo->panel_info.pwr_delay = 200;
179 return 0;
180 }
181
182 for(i=0; i<24; i++)
183 stmp[i] = BIOS_IN8(tmp+i+1);
184 stmp[24] = 0;
185 printk("radeonfb: panel ID string: %s\n", stmp);
186 rinfo->panel_info.xres = BIOS_IN16(tmp + 25);
187 rinfo->panel_info.yres = BIOS_IN16(tmp + 27);
188 printk("radeonfb: detected LVDS panel size from BIOS: %dx%d\n",
189 rinfo->panel_info.xres, rinfo->panel_info.yres);
190
191 rinfo->panel_info.pwr_delay = BIOS_IN16(tmp + 44);
192 pr_debug("BIOS provided panel power delay: %d\n", rinfo->panel_info.pwr_delay);
193 if (rinfo->panel_info.pwr_delay > 2000 || rinfo->panel_info.pwr_delay <= 0)
194 rinfo->panel_info.pwr_delay = 2000;
195
196 /*
197 * Some panels only work properly with some divider combinations
198 */
199 rinfo->panel_info.ref_divider = BIOS_IN16(tmp + 46);
200 rinfo->panel_info.post_divider = BIOS_IN8(tmp + 48);
201 rinfo->panel_info.fbk_divider = BIOS_IN16(tmp + 49);
202 if (rinfo->panel_info.ref_divider != 0 &&
203 rinfo->panel_info.fbk_divider > 3) {
204 rinfo->panel_info.use_bios_dividers = 1;
205 printk(KERN_INFO "radeondb: BIOS provided dividers will be used\n");
206 pr_debug("ref_divider = %x\n", rinfo->panel_info.ref_divider);
207 pr_debug("post_divider = %x\n", rinfo->panel_info.post_divider);
208 pr_debug("fbk_divider = %x\n", rinfo->panel_info.fbk_divider);
209 }
210 pr_debug("Scanning BIOS table ...\n");
211 for(i=0; i<32; i++) {
212 tmp0 = BIOS_IN16(tmp+64+i*2);
213 if (tmp0 == 0)
214 break;
215 pr_debug(" %d x %d\n", BIOS_IN16(tmp0), BIOS_IN16(tmp0+2));
216 if ((BIOS_IN16(tmp0) == rinfo->panel_info.xres) &&
217 (BIOS_IN16(tmp0+2) == rinfo->panel_info.yres)) {
218 rinfo->panel_info.hblank = (BIOS_IN16(tmp0+17) - BIOS_IN16(tmp0+19)) * 8;
219 rinfo->panel_info.hOver_plus = ((BIOS_IN16(tmp0+21) -
220 BIOS_IN16(tmp0+19) -1) * 8) & 0x7fff;
221 rinfo->panel_info.hSync_width = BIOS_IN8(tmp0+23) * 8;
222 rinfo->panel_info.vblank = BIOS_IN16(tmp0+24) - BIOS_IN16(tmp0+26);
223 rinfo->panel_info.vOver_plus = (BIOS_IN16(tmp0+28) & 0x7ff) - BIOS_IN16(tmp0+26);
224 rinfo->panel_info.vSync_width = (BIOS_IN16(tmp0+28) & 0xf800) >> 11;
225 rinfo->panel_info.clock = BIOS_IN16(tmp0+9);
226 /* Assume high active syncs for now until ATI tells me more... maybe we
227 * can probe register values here ?
228 */
229 rinfo->panel_info.hAct_high = 1;
230 rinfo->panel_info.vAct_high = 1;
231 /* Mark panel infos valid */
232 rinfo->panel_info.valid = 1;
233
234 pr_debug("Found panel in BIOS table:\n");
235 pr_debug(" hblank: %d\n", rinfo->panel_info.hblank);
236 pr_debug(" hOver_plus: %d\n", rinfo->panel_info.hOver_plus);
237 pr_debug(" hSync_width: %d\n", rinfo->panel_info.hSync_width);
238 pr_debug(" vblank: %d\n", rinfo->panel_info.vblank);
239 pr_debug(" vOver_plus: %d\n", rinfo->panel_info.vOver_plus);
240 pr_debug(" vSync_width: %d\n", rinfo->panel_info.vSync_width);
241 pr_debug(" clock: %d\n", rinfo->panel_info.clock);
242
243 return 1;
244 }
245 }
246 pr_debug("Didn't find panel in BIOS table !\n");
247
248 return 0;
249 }
250
251 /* Try to extract the connector informations from the BIOS. This
252 * doesn't quite work yet, but it's output is still useful for
253 * debugging
254 */
radeon_parse_connector_info(struct radeonfb_info * rinfo)255 static void radeon_parse_connector_info(struct radeonfb_info *rinfo)
256 {
257 int offset, chips, connectors, tmp, i, conn, type;
258
259 static char* __conn_type_table[16] = {
260 "NONE", "Proprietary", "CRT", "DVI-I", "DVI-D", "Unknown", "Unknown",
261 "Unknown", "Unknown", "Unknown", "Unknown", "Unknown", "Unknown",
262 "Unknown", "Unknown", "Unknown"
263 };
264
265 if (!rinfo->bios_seg)
266 return;
267
268 offset = BIOS_IN16(rinfo->fp_bios_start + 0x50);
269 if (offset == 0) {
270 printk(KERN_WARNING "radeonfb: No connector info table detected\n");
271 return;
272 }
273
274 /* Don't do much more at this point but displaying the data if
275 * DEBUG is enabled
276 */
277 chips = BIOS_IN8(offset++) >> 4;
278 pr_debug("%d chips in connector info\n", chips);
279 for (i = 0; i < chips; i++) {
280 tmp = BIOS_IN8(offset++);
281 connectors = tmp & 0x0f;
282 pr_debug(" - chip %d has %d connectors\n", tmp >> 4, connectors);
283 for (conn = 0; ; conn++) {
284 tmp = BIOS_IN16(offset);
285 if (tmp == 0)
286 break;
287 offset += 2;
288 type = (tmp >> 12) & 0x0f;
289 pr_debug(" * connector %d of type %d (%s) : %04x\n",
290 conn, type, __conn_type_table[type], tmp);
291 }
292 }
293 }
294
295
296 /*
297 * Probe physical connection of a CRT. This code comes from XFree
298 * as well and currently is only implemented for the CRT DAC, the
299 * code for the TVDAC is commented out in XFree as "non working"
300 */
radeon_crt_is_connected(struct radeonfb_info * rinfo,int is_crt_dac)301 static int radeon_crt_is_connected(struct radeonfb_info *rinfo, int is_crt_dac)
302 {
303 int connected = 0;
304
305 /* the monitor either wasn't connected or it is a non-DDC CRT.
306 * try to probe it
307 */
308 if (is_crt_dac) {
309 unsigned long ulOrigVCLK_ECP_CNTL;
310 unsigned long ulOrigDAC_CNTL;
311 unsigned long ulOrigDAC_EXT_CNTL;
312 unsigned long ulOrigCRTC_EXT_CNTL;
313 unsigned long ulData;
314 unsigned long ulMask;
315
316 ulOrigVCLK_ECP_CNTL = INPLL(VCLK_ECP_CNTL);
317
318 ulData = ulOrigVCLK_ECP_CNTL;
319 ulData &= ~(PIXCLK_ALWAYS_ONb
320 | PIXCLK_DAC_ALWAYS_ONb);
321 ulMask = ~(PIXCLK_ALWAYS_ONb
322 | PIXCLK_DAC_ALWAYS_ONb);
323 OUTPLLP(VCLK_ECP_CNTL, ulData, ulMask);
324
325 ulOrigCRTC_EXT_CNTL = INREG(CRTC_EXT_CNTL);
326 ulData = ulOrigCRTC_EXT_CNTL;
327 ulData |= CRTC_CRT_ON;
328 OUTREG(CRTC_EXT_CNTL, ulData);
329
330 ulOrigDAC_EXT_CNTL = INREG(DAC_EXT_CNTL);
331 ulData = ulOrigDAC_EXT_CNTL;
332 ulData &= ~DAC_FORCE_DATA_MASK;
333 ulData |= (DAC_FORCE_BLANK_OFF_EN
334 |DAC_FORCE_DATA_EN
335 |DAC_FORCE_DATA_SEL_MASK);
336 if ((rinfo->family == CHIP_FAMILY_RV250) ||
337 (rinfo->family == CHIP_FAMILY_RV280))
338 ulData |= (0x01b6 << DAC_FORCE_DATA_SHIFT);
339 else
340 ulData |= (0x01ac << DAC_FORCE_DATA_SHIFT);
341
342 OUTREG(DAC_EXT_CNTL, ulData);
343
344 ulOrigDAC_CNTL = INREG(DAC_CNTL);
345 ulData = ulOrigDAC_CNTL;
346 ulData |= DAC_CMP_EN;
347 ulData &= ~(DAC_RANGE_CNTL_MASK
348 | DAC_PDWN);
349 ulData |= 0x2;
350 OUTREG(DAC_CNTL, ulData);
351
352 mdelay(1);
353
354 ulData = INREG(DAC_CNTL);
355 connected = (DAC_CMP_OUTPUT & ulData) ? 1 : 0;
356
357 ulData = ulOrigVCLK_ECP_CNTL;
358 ulMask = 0xFFFFFFFFL;
359 OUTPLLP(VCLK_ECP_CNTL, ulData, ulMask);
360
361 OUTREG(DAC_CNTL, ulOrigDAC_CNTL );
362 OUTREG(DAC_EXT_CNTL, ulOrigDAC_EXT_CNTL );
363 OUTREG(CRTC_EXT_CNTL, ulOrigCRTC_EXT_CNTL);
364 }
365
366 return connected ? MT_CRT : MT_NONE;
367 }
368
369 /*
370 * Parse the "monitor_layout" string if any. This code is mostly
371 * copied from XFree's radeon driver
372 */
radeon_parse_monitor_layout(struct radeonfb_info * rinfo,const char * monitor_layout)373 static int radeon_parse_monitor_layout(struct radeonfb_info *rinfo,
374 const char *monitor_layout)
375 {
376 char s1[5], s2[5];
377 int i = 0, second = 0;
378 const char *s;
379
380 if (!monitor_layout)
381 return 0;
382
383 s = monitor_layout;
384 do {
385 switch(*s) {
386 case ',':
387 s1[i] = '\0';
388 i = 0;
389 second = 1;
390 break;
391 case ' ':
392 case '\0':
393 break;
394 default:
395 if (i > 4)
396 break;
397 if (second)
398 s2[i] = *s;
399 else
400 s1[i] = *s;
401 i++;
402 }
403
404 if (i > 4)
405 i = 4;
406
407 } while (*s++);
408 if (second)
409 s2[i] = 0;
410 else {
411 s1[i] = 0;
412 s2[0] = 0;
413 }
414 if (strcmp(s1, "CRT") == 0)
415 rinfo->mon1_type = MT_CRT;
416 else if (strcmp(s1, "TMDS") == 0)
417 rinfo->mon1_type = MT_DFP;
418 else if (strcmp(s1, "LVDS") == 0)
419 rinfo->mon1_type = MT_LCD;
420
421 if (strcmp(s2, "CRT") == 0)
422 rinfo->mon2_type = MT_CRT;
423 else if (strcmp(s2, "TMDS") == 0)
424 rinfo->mon2_type = MT_DFP;
425 else if (strcmp(s2, "LVDS") == 0)
426 rinfo->mon2_type = MT_LCD;
427
428 return 1;
429 }
430
431 /*
432 * Probe display on both primary and secondary card's connector (if any)
433 * by various available techniques (i2c, OF device tree, BIOS, ...) and
434 * try to retrieve EDID. The algorithm here comes from XFree's radeon
435 * driver
436 */
radeon_probe_screens(struct radeonfb_info * rinfo,const char * monitor_layout,int ignore_edid)437 void radeon_probe_screens(struct radeonfb_info *rinfo,
438 const char *monitor_layout, int ignore_edid)
439 {
440 #ifdef CONFIG_FB_RADEON_I2C
441 int ddc_crt2_used = 0;
442 #endif
443 int tmp, i;
444
445 radeon_parse_connector_info(rinfo);
446
447 if (radeon_parse_monitor_layout(rinfo, monitor_layout)) {
448
449 /*
450 * If user specified a monitor_layout option, use it instead
451 * of auto-detecting. Maybe we should only use this argument
452 * on the first radeon card probed or provide a way to specify
453 * a layout for each card ?
454 */
455
456 pr_debug("Using specified monitor layout: %s", monitor_layout);
457 #ifdef CONFIG_FB_RADEON_I2C
458 if (!ignore_edid) {
459 if (rinfo->mon1_type != MT_NONE)
460 if (!radeon_probe_i2c_connector(rinfo, ddc_dvi, &rinfo->mon1_EDID)) {
461 radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon1_EDID);
462 ddc_crt2_used = 1;
463 }
464 if (rinfo->mon2_type != MT_NONE)
465 if (!radeon_probe_i2c_connector(rinfo, ddc_vga, &rinfo->mon2_EDID) &&
466 !ddc_crt2_used)
467 radeon_probe_i2c_connector(rinfo, ddc_crt2, &rinfo->mon2_EDID);
468 }
469 #endif /* CONFIG_FB_RADEON_I2C */
470 if (rinfo->mon1_type == MT_NONE) {
471 if (rinfo->mon2_type != MT_NONE) {
472 rinfo->mon1_type = rinfo->mon2_type;
473 rinfo->mon1_EDID = rinfo->mon2_EDID;
474 } else {
475 rinfo->mon1_type = MT_CRT;
476 printk(KERN_INFO "radeonfb: No valid monitor, assuming CRT on first port\n");
477 }
478 rinfo->mon2_type = MT_NONE;
479 rinfo->mon2_EDID = NULL;
480 }
481 } else {
482 /*
483 * Auto-detecting display type (well... trying to ...)
484 */
485
486 pr_debug("Starting monitor auto detection...\n");
487
488 #if defined(DEBUG) && defined(CONFIG_FB_RADEON_I2C)
489 {
490 u8 *EDIDs[4] = { NULL, NULL, NULL, NULL };
491 int i;
492
493 for (i = 0; i < 4; i++)
494 radeon_probe_i2c_connector(rinfo, i + 1, &EDIDs[i]);
495 }
496 #endif /* DEBUG */
497 /*
498 * Old single head cards
499 */
500 if (!rinfo->has_CRTC2) {
501 #if defined(CONFIG_PPC) || defined(CONFIG_SPARC)
502 if (rinfo->mon1_type == MT_NONE)
503 rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0,
504 &rinfo->mon1_EDID);
505 #endif /* CONFIG_PPC || CONFIG_SPARC */
506 #ifdef CONFIG_FB_RADEON_I2C
507 if (rinfo->mon1_type == MT_NONE)
508 rinfo->mon1_type =
509 radeon_probe_i2c_connector(rinfo, ddc_dvi,
510 &rinfo->mon1_EDID);
511 if (rinfo->mon1_type == MT_NONE)
512 rinfo->mon1_type =
513 radeon_probe_i2c_connector(rinfo, ddc_vga,
514 &rinfo->mon1_EDID);
515 if (rinfo->mon1_type == MT_NONE)
516 rinfo->mon1_type =
517 radeon_probe_i2c_connector(rinfo, ddc_crt2,
518 &rinfo->mon1_EDID);
519 #endif /* CONFIG_FB_RADEON_I2C */
520 if (rinfo->mon1_type == MT_NONE)
521 rinfo->mon1_type = MT_CRT;
522 goto bail;
523 }
524
525 /*
526 * Check for cards with reversed DACs or TMDS controllers using BIOS
527 */
528 if (rinfo->bios_seg &&
529 (tmp = BIOS_IN16(rinfo->fp_bios_start + 0x50))) {
530 for (i = 1; i < 4; i++) {
531 unsigned int tmp0;
532
533 if (!BIOS_IN8(tmp + i*2) && i > 1)
534 break;
535 tmp0 = BIOS_IN16(tmp + i*2);
536 if ((!(tmp0 & 0x01)) && (((tmp0 >> 8) & 0x0f) == ddc_dvi)) {
537 rinfo->reversed_DAC = 1;
538 printk(KERN_INFO "radeonfb: Reversed DACs detected\n");
539 }
540 if ((((tmp0 >> 8) & 0x0f) == ddc_dvi) && ((tmp0 >> 4) & 0x01)) {
541 rinfo->reversed_TMDS = 1;
542 printk(KERN_INFO "radeonfb: Reversed TMDS detected\n");
543 }
544 }
545 }
546
547 /*
548 * Probe primary head (DVI or laptop internal panel)
549 */
550 #if defined(CONFIG_PPC) || defined(CONFIG_SPARC)
551 if (rinfo->mon1_type == MT_NONE)
552 rinfo->mon1_type = radeon_probe_OF_head(rinfo, 0,
553 &rinfo->mon1_EDID);
554 #endif /* CONFIG_PPC || CONFIG_SPARC */
555 #ifdef CONFIG_FB_RADEON_I2C
556 if (rinfo->mon1_type == MT_NONE)
557 rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_dvi,
558 &rinfo->mon1_EDID);
559 if (rinfo->mon1_type == MT_NONE) {
560 rinfo->mon1_type = radeon_probe_i2c_connector(rinfo, ddc_crt2,
561 &rinfo->mon1_EDID);
562 if (rinfo->mon1_type != MT_NONE)
563 ddc_crt2_used = 1;
564 }
565 #endif /* CONFIG_FB_RADEON_I2C */
566 if (rinfo->mon1_type == MT_NONE && rinfo->is_mobility &&
567 ((rinfo->bios_seg && (INREG(BIOS_4_SCRATCH) & 4))
568 || (INREG(LVDS_GEN_CNTL) & LVDS_ON))) {
569 rinfo->mon1_type = MT_LCD;
570 printk("Non-DDC laptop panel detected\n");
571 }
572 if (rinfo->mon1_type == MT_NONE)
573 rinfo->mon1_type = radeon_crt_is_connected(rinfo, rinfo->reversed_DAC);
574
575 /*
576 * Probe secondary head (mostly VGA, can be DVI)
577 */
578 #if defined(CONFIG_PPC) || defined(CONFIG_SPARC)
579 if (rinfo->mon2_type == MT_NONE)
580 rinfo->mon2_type = radeon_probe_OF_head(rinfo, 1,
581 &rinfo->mon2_EDID);
582 #endif /* CONFIG_PPC || defined(CONFIG_SPARC) */
583 #ifdef CONFIG_FB_RADEON_I2C
584 if (rinfo->mon2_type == MT_NONE)
585 rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_vga,
586 &rinfo->mon2_EDID);
587 if (rinfo->mon2_type == MT_NONE && !ddc_crt2_used)
588 rinfo->mon2_type = radeon_probe_i2c_connector(rinfo, ddc_crt2,
589 &rinfo->mon2_EDID);
590 #endif /* CONFIG_FB_RADEON_I2C */
591 if (rinfo->mon2_type == MT_NONE)
592 rinfo->mon2_type = radeon_crt_is_connected(rinfo, !rinfo->reversed_DAC);
593
594 /*
595 * If we only detected port 2, we swap them, if none detected,
596 * assume CRT (maybe fallback to old BIOS_SCRATCH stuff ? or look
597 * at FP registers ?)
598 */
599 if (rinfo->mon1_type == MT_NONE) {
600 if (rinfo->mon2_type != MT_NONE) {
601 rinfo->mon1_type = rinfo->mon2_type;
602 rinfo->mon1_EDID = rinfo->mon2_EDID;
603 } else
604 rinfo->mon1_type = MT_CRT;
605 rinfo->mon2_type = MT_NONE;
606 rinfo->mon2_EDID = NULL;
607 }
608
609 /*
610 * Deal with reversed TMDS
611 */
612 if (rinfo->reversed_TMDS) {
613 /* Always keep internal TMDS as primary head */
614 if (rinfo->mon1_type == MT_DFP || rinfo->mon2_type == MT_DFP) {
615 int tmp_type = rinfo->mon1_type;
616 u8 *tmp_EDID = rinfo->mon1_EDID;
617 rinfo->mon1_type = rinfo->mon2_type;
618 rinfo->mon1_EDID = rinfo->mon2_EDID;
619 rinfo->mon2_type = tmp_type;
620 rinfo->mon2_EDID = tmp_EDID;
621 if (rinfo->mon1_type == MT_CRT || rinfo->mon2_type == MT_CRT)
622 rinfo->reversed_DAC ^= 1;
623 }
624 }
625 }
626 if (ignore_edid) {
627 kfree(rinfo->mon1_EDID);
628 rinfo->mon1_EDID = NULL;
629 kfree(rinfo->mon2_EDID);
630 rinfo->mon2_EDID = NULL;
631 }
632
633 bail:
634 printk(KERN_INFO "radeonfb: Monitor 1 type %s found\n",
635 radeon_get_mon_name(rinfo->mon1_type));
636 if (rinfo->mon1_EDID)
637 printk(KERN_INFO "radeonfb: EDID probed\n");
638 if (!rinfo->has_CRTC2)
639 return;
640 printk(KERN_INFO "radeonfb: Monitor 2 type %s found\n",
641 radeon_get_mon_name(rinfo->mon2_type));
642 if (rinfo->mon2_EDID)
643 printk(KERN_INFO "radeonfb: EDID probed\n");
644 }
645
646
647 /*
648 * This function applies any arch/model/machine specific fixups
649 * to the panel info. It may eventually alter EDID block as
650 * well or whatever is specific to a given model and not probed
651 * properly by the default code
652 */
radeon_fixup_panel_info(struct radeonfb_info * rinfo)653 static void radeon_fixup_panel_info(struct radeonfb_info *rinfo)
654 {
655 #ifdef CONFIG_PPC
656 /*
657 * LCD Flat panels should use fixed dividers, we enfore that on
658 * PPC only for now...
659 */
660 if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type == MT_LCD
661 && rinfo->is_mobility) {
662 int ppll_div_sel;
663 u32 ppll_divn;
664 ppll_div_sel = INREG8(CLOCK_CNTL_INDEX + 1) & 0x3;
665 radeon_pll_errata_after_index(rinfo);
666 ppll_divn = INPLL(PPLL_DIV_0 + ppll_div_sel);
667 rinfo->panel_info.ref_divider = rinfo->pll.ref_div;
668 rinfo->panel_info.fbk_divider = ppll_divn & 0x7ff;
669 rinfo->panel_info.post_divider = (ppll_divn >> 16) & 0x7;
670 rinfo->panel_info.use_bios_dividers = 1;
671
672 printk(KERN_DEBUG "radeonfb: Using Firmware dividers 0x%08x "
673 "from PPLL %d\n",
674 rinfo->panel_info.fbk_divider |
675 (rinfo->panel_info.post_divider << 16),
676 ppll_div_sel);
677 }
678 #endif /* CONFIG_PPC */
679 }
680
681
682 /*
683 * Fill up panel infos from a mode definition, either returned by the EDID
684 * or from the default mode when we can't do any better
685 */
radeon_var_to_panel_info(struct radeonfb_info * rinfo,struct fb_var_screeninfo * var)686 static void radeon_var_to_panel_info(struct radeonfb_info *rinfo, struct fb_var_screeninfo *var)
687 {
688 rinfo->panel_info.xres = var->xres;
689 rinfo->panel_info.yres = var->yres;
690 rinfo->panel_info.clock = 100000000 / var->pixclock;
691 rinfo->panel_info.hOver_plus = var->right_margin;
692 rinfo->panel_info.hSync_width = var->hsync_len;
693 rinfo->panel_info.hblank = var->left_margin +
694 (var->right_margin + var->hsync_len);
695 rinfo->panel_info.vOver_plus = var->lower_margin;
696 rinfo->panel_info.vSync_width = var->vsync_len;
697 rinfo->panel_info.vblank = var->upper_margin +
698 (var->lower_margin + var->vsync_len);
699 rinfo->panel_info.hAct_high =
700 (var->sync & FB_SYNC_HOR_HIGH_ACT) != 0;
701 rinfo->panel_info.vAct_high =
702 (var->sync & FB_SYNC_VERT_HIGH_ACT) != 0;
703 rinfo->panel_info.valid = 1;
704 /* We use a default of 200ms for the panel power delay,
705 * I need to have a real schedule() instead of mdelay's in the panel code.
706 * we might be possible to figure out a better power delay either from
707 * MacOS OF tree or from the EDID block (proprietary extensions ?)
708 */
709 rinfo->panel_info.pwr_delay = 200;
710 }
711
radeon_videomode_to_var(struct fb_var_screeninfo * var,const struct fb_videomode * mode)712 static void radeon_videomode_to_var(struct fb_var_screeninfo *var,
713 const struct fb_videomode *mode)
714 {
715 var->xres = mode->xres;
716 var->yres = mode->yres;
717 var->xres_virtual = mode->xres;
718 var->yres_virtual = mode->yres;
719 var->xoffset = 0;
720 var->yoffset = 0;
721 var->pixclock = mode->pixclock;
722 var->left_margin = mode->left_margin;
723 var->right_margin = mode->right_margin;
724 var->upper_margin = mode->upper_margin;
725 var->lower_margin = mode->lower_margin;
726 var->hsync_len = mode->hsync_len;
727 var->vsync_len = mode->vsync_len;
728 var->sync = mode->sync;
729 var->vmode = mode->vmode;
730 }
731
732 #ifdef CONFIG_PPC_PSERIES
is_powerblade(const char * model)733 static int is_powerblade(const char *model)
734 {
735 struct device_node *root;
736 const char* cp;
737 int len, l, rc = 0;
738
739 root = of_find_node_by_path("/");
740 if (root && model) {
741 l = strlen(model);
742 cp = of_get_property(root, "model", &len);
743 if (cp)
744 rc = memcmp(model, cp, min(len, l)) == 0;
745 of_node_put(root);
746 }
747 return rc;
748 }
749 #endif
750
751 /*
752 * Build the modedb for head 1 (head 2 will come later), check panel infos
753 * from either BIOS or EDID, and pick up the default mode
754 */
radeon_check_modes(struct radeonfb_info * rinfo,const char * mode_option)755 void radeon_check_modes(struct radeonfb_info *rinfo, const char *mode_option)
756 {
757 struct fb_info * info = rinfo->info;
758 int has_default_mode = 0;
759
760 /*
761 * Fill default var first
762 */
763 info->var = radeonfb_default_var;
764 INIT_LIST_HEAD(&info->modelist);
765
766 /*
767 * First check out what BIOS has to say
768 */
769 if (rinfo->mon1_type == MT_LCD)
770 radeon_get_panel_info_BIOS(rinfo);
771
772 /*
773 * Parse EDID detailed timings and deduce panel infos if any. Right now
774 * we only deal with first entry returned by parse_EDID, we may do better
775 * some day...
776 */
777 if (!rinfo->panel_info.use_bios_dividers && rinfo->mon1_type != MT_CRT
778 && rinfo->mon1_EDID) {
779 struct fb_var_screeninfo var;
780 pr_debug("Parsing EDID data for panel info\n");
781 if (fb_parse_edid(rinfo->mon1_EDID, &var) == 0) {
782 if (var.xres >= rinfo->panel_info.xres &&
783 var.yres >= rinfo->panel_info.yres)
784 radeon_var_to_panel_info(rinfo, &var);
785 }
786 }
787
788 /*
789 * Do any additional platform/arch fixups to the panel infos
790 */
791 radeon_fixup_panel_info(rinfo);
792
793 /*
794 * If we have some valid panel infos, we setup the default mode based on
795 * those
796 */
797 if (rinfo->mon1_type != MT_CRT && rinfo->panel_info.valid) {
798 struct fb_var_screeninfo *var = &info->var;
799
800 pr_debug("Setting up default mode based on panel info\n");
801 var->xres = rinfo->panel_info.xres;
802 var->yres = rinfo->panel_info.yres;
803 var->xres_virtual = rinfo->panel_info.xres;
804 var->yres_virtual = rinfo->panel_info.yres;
805 var->xoffset = var->yoffset = 0;
806 var->bits_per_pixel = 8;
807 var->pixclock = 100000000 / rinfo->panel_info.clock;
808 var->left_margin = (rinfo->panel_info.hblank - rinfo->panel_info.hOver_plus
809 - rinfo->panel_info.hSync_width);
810 var->right_margin = rinfo->panel_info.hOver_plus;
811 var->upper_margin = (rinfo->panel_info.vblank - rinfo->panel_info.vOver_plus
812 - rinfo->panel_info.vSync_width);
813 var->lower_margin = rinfo->panel_info.vOver_plus;
814 var->hsync_len = rinfo->panel_info.hSync_width;
815 var->vsync_len = rinfo->panel_info.vSync_width;
816 var->sync = 0;
817 if (rinfo->panel_info.hAct_high)
818 var->sync |= FB_SYNC_HOR_HIGH_ACT;
819 if (rinfo->panel_info.vAct_high)
820 var->sync |= FB_SYNC_VERT_HIGH_ACT;
821 var->vmode = 0;
822 has_default_mode = 1;
823 }
824
825 /*
826 * Now build modedb from EDID
827 */
828 if (rinfo->mon1_EDID) {
829 fb_edid_to_monspecs(rinfo->mon1_EDID, &info->monspecs);
830 fb_videomode_to_modelist(info->monspecs.modedb,
831 info->monspecs.modedb_len,
832 &info->modelist);
833 rinfo->mon1_modedb = info->monspecs.modedb;
834 rinfo->mon1_dbsize = info->monspecs.modedb_len;
835 }
836
837
838 /*
839 * Finally, if we don't have panel infos we need to figure some (or
840 * we try to read it from card), we try to pick a default mode
841 * and create some panel infos. Whatever...
842 */
843 if (rinfo->mon1_type != MT_CRT && !rinfo->panel_info.valid) {
844 struct fb_videomode *modedb;
845 int dbsize;
846 char modename[32];
847
848 pr_debug("Guessing panel info...\n");
849 if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) {
850 u32 tmp = INREG(FP_HORZ_STRETCH) & HORZ_PANEL_SIZE;
851 rinfo->panel_info.xres = ((tmp >> HORZ_PANEL_SHIFT) + 1) * 8;
852 tmp = INREG(FP_VERT_STRETCH) & VERT_PANEL_SIZE;
853 rinfo->panel_info.yres = (tmp >> VERT_PANEL_SHIFT) + 1;
854 }
855 if (rinfo->panel_info.xres == 0 || rinfo->panel_info.yres == 0) {
856 printk(KERN_WARNING "radeonfb: Can't find panel size, going back to CRT\n");
857 rinfo->mon1_type = MT_CRT;
858 goto pickup_default;
859 }
860 printk(KERN_WARNING "radeonfb: Assuming panel size %dx%d\n",
861 rinfo->panel_info.xres, rinfo->panel_info.yres);
862 modedb = rinfo->mon1_modedb;
863 dbsize = rinfo->mon1_dbsize;
864 snprintf(modename, 31, "%dx%d", rinfo->panel_info.xres, rinfo->panel_info.yres);
865 if (fb_find_mode(&info->var, info, modename,
866 modedb, dbsize, NULL, 8) == 0) {
867 printk(KERN_WARNING "radeonfb: Can't find mode for panel size, going back to CRT\n");
868 rinfo->mon1_type = MT_CRT;
869 goto pickup_default;
870 }
871 has_default_mode = 1;
872 radeon_var_to_panel_info(rinfo, &info->var);
873 }
874
875 pickup_default:
876 /*
877 * Apply passed-in mode option if any
878 */
879 if (mode_option) {
880 if (fb_find_mode(&info->var, info, mode_option,
881 info->monspecs.modedb,
882 info->monspecs.modedb_len, NULL, 8) != 0)
883 has_default_mode = 1;
884 }
885
886 #ifdef CONFIG_PPC_PSERIES
887 if (!has_default_mode && (
888 is_powerblade("IBM,8842") || /* JS20 */
889 is_powerblade("IBM,8844") || /* JS21 */
890 is_powerblade("IBM,7998") || /* JS12/JS21/JS22 */
891 is_powerblade("IBM,0792") || /* QS21 */
892 is_powerblade("IBM,0793") /* QS22 */
893 )) {
894 printk("Falling back to 800x600 on JSxx hardware\n");
895 if (fb_find_mode(&info->var, info, "800x600@60",
896 info->monspecs.modedb,
897 info->monspecs.modedb_len, NULL, 8) != 0)
898 has_default_mode = 1;
899 }
900 #endif
901
902 /*
903 * Still no mode, let's pick up a default from the db
904 */
905 if (!has_default_mode && info->monspecs.modedb != NULL) {
906 struct fb_monspecs *specs = &info->monspecs;
907 struct fb_videomode *modedb = NULL;
908
909 /* get preferred timing */
910 if (specs->misc & FB_MISC_1ST_DETAIL) {
911 int i;
912
913 for (i = 0; i < specs->modedb_len; i++) {
914 if (specs->modedb[i].flag & FB_MODE_IS_FIRST) {
915 modedb = &specs->modedb[i];
916 break;
917 }
918 }
919 } else {
920 /* otherwise, get first mode in database */
921 modedb = &specs->modedb[0];
922 }
923 if (modedb != NULL) {
924 info->var.bits_per_pixel = 8;
925 radeon_videomode_to_var(&info->var, modedb);
926 has_default_mode = 1;
927 }
928 }
929 if (1) {
930 struct fb_videomode mode;
931 /* Make sure that whatever mode got selected is actually in the
932 * modelist or the kernel may die
933 */
934 fb_var_to_videomode(&mode, &info->var);
935 fb_add_videomode(&mode, &info->modelist);
936 }
937 }
938
939 /*
940 * The code below is used to pick up a mode in check_var and
941 * set_var. It should be made generic
942 */
943
944 /*
945 * This is used when looking for modes. We assign a "distance" value
946 * to a mode in the modedb depending how "close" it is from what we
947 * are looking for.
948 * Currently, we don't compare that much, we could do better but
949 * the current fbcon doesn't quite mind ;)
950 */
radeon_compare_modes(const struct fb_var_screeninfo * var,const struct fb_videomode * mode)951 static int radeon_compare_modes(const struct fb_var_screeninfo *var,
952 const struct fb_videomode *mode)
953 {
954 int distance = 0;
955
956 distance = mode->yres - var->yres;
957 distance += (mode->xres - var->xres)/2;
958 return distance;
959 }
960
961 /*
962 * This function is called by check_var, it gets the passed in mode parameter, and
963 * outputs a valid mode matching the passed-in one as closely as possible.
964 * We need something better ultimately. Things like fbcon basically pass us out
965 * current mode with xres/yres hacked, while things like XFree will actually
966 * produce a full timing that we should respect as much as possible.
967 *
968 * This is why I added the FB_ACTIVATE_FIND that is used by fbcon. Without this,
969 * we do a simple spec match, that's all. With it, we actually look for a mode in
970 * either our monitor modedb or the vesa one if none
971 *
972 */
radeon_match_mode(struct radeonfb_info * rinfo,struct fb_var_screeninfo * dest,const struct fb_var_screeninfo * src)973 int radeon_match_mode(struct radeonfb_info *rinfo,
974 struct fb_var_screeninfo *dest,
975 const struct fb_var_screeninfo *src)
976 {
977 const struct fb_videomode *db = vesa_modes;
978 int i, dbsize = 34;
979 int has_rmx, native_db = 0;
980 int distance = INT_MAX;
981 const struct fb_videomode *candidate = NULL;
982
983 /* Start with a copy of the requested mode */
984 memcpy(dest, src, sizeof(struct fb_var_screeninfo));
985
986 /* Check if we have a modedb built from EDID */
987 if (rinfo->mon1_modedb) {
988 db = rinfo->mon1_modedb;
989 dbsize = rinfo->mon1_dbsize;
990 native_db = 1;
991 }
992
993 /* Check if we have a scaler allowing any fancy mode */
994 has_rmx = rinfo->mon1_type == MT_LCD || rinfo->mon1_type == MT_DFP;
995
996 /* If we have a scaler and are passed FB_ACTIVATE_TEST or
997 * FB_ACTIVATE_NOW, just do basic checking and return if the
998 * mode match
999 */
1000 if ((src->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_TEST ||
1001 (src->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) {
1002 /* We don't have an RMX, validate timings. If we don't have
1003 * monspecs, we should be paranoid and not let use go above
1004 * 640x480-60, but I assume userland knows what it's doing here
1005 * (though I may be proven wrong...)
1006 */
1007 if (has_rmx == 0 && rinfo->mon1_modedb)
1008 if (fb_validate_mode((struct fb_var_screeninfo *)src, rinfo->info))
1009 return -EINVAL;
1010 return 0;
1011 }
1012
1013 /* Now look for a mode in the database */
1014 while (db) {
1015 for (i = 0; i < dbsize; i++) {
1016 int d;
1017
1018 if (db[i].yres < src->yres)
1019 continue;
1020 if (db[i].xres < src->xres)
1021 continue;
1022 d = radeon_compare_modes(src, &db[i]);
1023 /* If the new mode is at least as good as the previous one,
1024 * then it's our new candidate
1025 */
1026 if (d < distance) {
1027 candidate = &db[i];
1028 distance = d;
1029 }
1030 }
1031 db = NULL;
1032 /* If we have a scaler, we allow any mode from the database */
1033 if (native_db && has_rmx) {
1034 db = vesa_modes;
1035 dbsize = 34;
1036 native_db = 0;
1037 }
1038 }
1039
1040 /* If we have found a match, return it */
1041 if (candidate != NULL) {
1042 radeon_videomode_to_var(dest, candidate);
1043 return 0;
1044 }
1045
1046 /* If we haven't and don't have a scaler, fail */
1047 if (!has_rmx)
1048 return -EINVAL;
1049
1050 return 0;
1051 }
1052