xref: /openbmc/linux/drivers/w1/slaves/w1_ds2431.c (revision 57de2dfc)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * w1_ds2431.c - w1 family 2d (DS2431) driver
4  *
5  * Copyright (c) 2008 Bernhard Weirich <bernhard.weirich@riedel.net>
6  *
7  * Heavily inspired by w1_DS2433 driver from Ben Gardner <bgardner@wabtec.com>
8  */
9 
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/moduleparam.h>
13 #include <linux/device.h>
14 #include <linux/types.h>
15 #include <linux/delay.h>
16 
17 #include <linux/w1.h>
18 
19 #define W1_EEPROM_DS2431	0x2D
20 
21 #define W1_F2D_EEPROM_SIZE		128
22 #define W1_F2D_PAGE_COUNT		4
23 #define W1_F2D_PAGE_BITS		5
24 #define W1_F2D_PAGE_SIZE		(1<<W1_F2D_PAGE_BITS)
25 #define W1_F2D_PAGE_MASK		0x1F
26 
27 #define W1_F2D_SCRATCH_BITS  3
28 #define W1_F2D_SCRATCH_SIZE  (1<<W1_F2D_SCRATCH_BITS)
29 #define W1_F2D_SCRATCH_MASK  (W1_F2D_SCRATCH_SIZE-1)
30 
31 #define W1_F2D_READ_EEPROM	0xF0
32 #define W1_F2D_WRITE_SCRATCH	0x0F
33 #define W1_F2D_READ_SCRATCH	0xAA
34 #define W1_F2D_COPY_SCRATCH	0x55
35 
36 
37 #define W1_F2D_TPROG_MS		11
38 
39 #define W1_F2D_READ_RETRIES		10
40 #define W1_F2D_READ_MAXLEN		8
41 
42 /*
43  * Check the file size bounds and adjusts count as needed.
44  * This would not be needed if the file size didn't reset to 0 after a write.
45  */
w1_f2d_fix_count(loff_t off,size_t count,size_t size)46 static inline size_t w1_f2d_fix_count(loff_t off, size_t count, size_t size)
47 {
48 	if (off > size)
49 		return 0;
50 
51 	if ((off + count) > size)
52 		return size - off;
53 
54 	return count;
55 }
56 
57 /*
58  * Read a block from W1 ROM two times and compares the results.
59  * If they are equal they are returned, otherwise the read
60  * is repeated W1_F2D_READ_RETRIES times.
61  *
62  * count must not exceed W1_F2D_READ_MAXLEN.
63  */
w1_f2d_readblock(struct w1_slave * sl,int off,int count,char * buf)64 static int w1_f2d_readblock(struct w1_slave *sl, int off, int count, char *buf)
65 {
66 	u8 wrbuf[3];
67 	u8 cmp[W1_F2D_READ_MAXLEN];
68 	int tries = W1_F2D_READ_RETRIES;
69 
70 	do {
71 		wrbuf[0] = W1_F2D_READ_EEPROM;
72 		wrbuf[1] = off & 0xff;
73 		wrbuf[2] = off >> 8;
74 
75 		if (w1_reset_select_slave(sl))
76 			return -1;
77 
78 		w1_write_block(sl->master, wrbuf, 3);
79 		w1_read_block(sl->master, buf, count);
80 
81 		if (w1_reset_select_slave(sl))
82 			return -1;
83 
84 		w1_write_block(sl->master, wrbuf, 3);
85 		w1_read_block(sl->master, cmp, count);
86 
87 		if (!memcmp(cmp, buf, count))
88 			return 0;
89 	} while (--tries);
90 
91 	dev_err(&sl->dev, "proof reading failed %d times\n",
92 			W1_F2D_READ_RETRIES);
93 
94 	return -1;
95 }
96 
eeprom_read(struct file * filp,struct kobject * kobj,struct bin_attribute * bin_attr,char * buf,loff_t off,size_t count)97 static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
98 			   struct bin_attribute *bin_attr, char *buf,
99 			   loff_t off, size_t count)
100 {
101 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
102 	int todo = count;
103 
104 	count = w1_f2d_fix_count(off, count, W1_F2D_EEPROM_SIZE);
105 	if (count == 0)
106 		return 0;
107 
108 	mutex_lock(&sl->master->bus_mutex);
109 
110 	/* read directly from the EEPROM in chunks of W1_F2D_READ_MAXLEN */
111 	while (todo > 0) {
112 		int block_read;
113 
114 		if (todo >= W1_F2D_READ_MAXLEN)
115 			block_read = W1_F2D_READ_MAXLEN;
116 		else
117 			block_read = todo;
118 
119 		if (w1_f2d_readblock(sl, off, block_read, buf) < 0)
120 			count = -EIO;
121 
122 		todo -= W1_F2D_READ_MAXLEN;
123 		buf += W1_F2D_READ_MAXLEN;
124 		off += W1_F2D_READ_MAXLEN;
125 	}
126 
127 	mutex_unlock(&sl->master->bus_mutex);
128 
129 	return count;
130 }
131 
132 /*
133  * Writes to the scratchpad and reads it back for verification.
134  * Then copies the scratchpad to EEPROM.
135  * The data must be aligned at W1_F2D_SCRATCH_SIZE bytes and
136  * must be W1_F2D_SCRATCH_SIZE bytes long.
137  * The master must be locked.
138  *
139  * @param sl	The slave structure
140  * @param addr	Address for the write
141  * @param len   length must be <= (W1_F2D_PAGE_SIZE - (addr & W1_F2D_PAGE_MASK))
142  * @param data	The data to write
143  * @return	0=Success -1=failure
144  */
w1_f2d_write(struct w1_slave * sl,int addr,int len,const u8 * data)145 static int w1_f2d_write(struct w1_slave *sl, int addr, int len, const u8 *data)
146 {
147 	int tries = W1_F2D_READ_RETRIES;
148 	u8 wrbuf[4];
149 	u8 rdbuf[W1_F2D_SCRATCH_SIZE + 3];
150 	u8 es = (addr + len - 1) % W1_F2D_SCRATCH_SIZE;
151 
152 retry:
153 
154 	/* Write the data to the scratchpad */
155 	if (w1_reset_select_slave(sl))
156 		return -1;
157 
158 	wrbuf[0] = W1_F2D_WRITE_SCRATCH;
159 	wrbuf[1] = addr & 0xff;
160 	wrbuf[2] = addr >> 8;
161 
162 	w1_write_block(sl->master, wrbuf, 3);
163 	w1_write_block(sl->master, data, len);
164 
165 	/* Read the scratchpad and verify */
166 	if (w1_reset_select_slave(sl))
167 		return -1;
168 
169 	w1_write_8(sl->master, W1_F2D_READ_SCRATCH);
170 	w1_read_block(sl->master, rdbuf, len + 3);
171 
172 	/* Compare what was read against the data written */
173 	if ((rdbuf[0] != wrbuf[1]) || (rdbuf[1] != wrbuf[2]) ||
174 	    (rdbuf[2] != es) || (memcmp(data, &rdbuf[3], len) != 0)) {
175 
176 		if (--tries)
177 			goto retry;
178 
179 		dev_err(&sl->dev,
180 			"could not write to eeprom, scratchpad compare failed %d times\n",
181 			W1_F2D_READ_RETRIES);
182 
183 		return -1;
184 	}
185 
186 	/* Copy the scratchpad to EEPROM */
187 	if (w1_reset_select_slave(sl))
188 		return -1;
189 
190 	wrbuf[0] = W1_F2D_COPY_SCRATCH;
191 	wrbuf[3] = es;
192 	w1_write_block(sl->master, wrbuf, 4);
193 
194 	/* Sleep for tprog ms to wait for the write to complete */
195 	msleep(W1_F2D_TPROG_MS);
196 
197 	/* Reset the bus to wake up the EEPROM  */
198 	w1_reset_bus(sl->master);
199 
200 	return 0;
201 }
202 
eeprom_write(struct file * filp,struct kobject * kobj,struct bin_attribute * bin_attr,char * buf,loff_t off,size_t count)203 static ssize_t eeprom_write(struct file *filp, struct kobject *kobj,
204 			    struct bin_attribute *bin_attr, char *buf,
205 			    loff_t off, size_t count)
206 {
207 	struct w1_slave *sl = kobj_to_w1_slave(kobj);
208 	int addr, len;
209 	int copy;
210 
211 	count = w1_f2d_fix_count(off, count, W1_F2D_EEPROM_SIZE);
212 	if (count == 0)
213 		return 0;
214 
215 	mutex_lock(&sl->master->bus_mutex);
216 
217 	/* Can only write data in blocks of the size of the scratchpad */
218 	addr = off;
219 	len = count;
220 	while (len > 0) {
221 
222 		/* if len too short or addr not aligned */
223 		if (len < W1_F2D_SCRATCH_SIZE || addr & W1_F2D_SCRATCH_MASK) {
224 			char tmp[W1_F2D_SCRATCH_SIZE];
225 
226 			/* read the block and update the parts to be written */
227 			if (w1_f2d_readblock(sl, addr & ~W1_F2D_SCRATCH_MASK,
228 					W1_F2D_SCRATCH_SIZE, tmp)) {
229 				count = -EIO;
230 				goto out_up;
231 			}
232 
233 			/* copy at most to the boundary of the PAGE or len */
234 			copy = W1_F2D_SCRATCH_SIZE -
235 				(addr & W1_F2D_SCRATCH_MASK);
236 
237 			if (copy > len)
238 				copy = len;
239 
240 			memcpy(&tmp[addr & W1_F2D_SCRATCH_MASK], buf, copy);
241 			if (w1_f2d_write(sl, addr & ~W1_F2D_SCRATCH_MASK,
242 					W1_F2D_SCRATCH_SIZE, tmp) < 0) {
243 				count = -EIO;
244 				goto out_up;
245 			}
246 		} else {
247 
248 			copy = W1_F2D_SCRATCH_SIZE;
249 			if (w1_f2d_write(sl, addr, copy, buf) < 0) {
250 				count = -EIO;
251 				goto out_up;
252 			}
253 		}
254 		buf += copy;
255 		addr += copy;
256 		len -= copy;
257 	}
258 
259 out_up:
260 	mutex_unlock(&sl->master->bus_mutex);
261 
262 	return count;
263 }
264 
265 static BIN_ATTR_RW(eeprom, W1_F2D_EEPROM_SIZE);
266 
267 static struct bin_attribute *w1_f2d_bin_attrs[] = {
268 	&bin_attr_eeprom,
269 	NULL,
270 };
271 
272 static const struct attribute_group w1_f2d_group = {
273 	.bin_attrs = w1_f2d_bin_attrs,
274 };
275 
276 static const struct attribute_group *w1_f2d_groups[] = {
277 	&w1_f2d_group,
278 	NULL,
279 };
280 
281 static const struct w1_family_ops w1_f2d_fops = {
282 	.groups		= w1_f2d_groups,
283 };
284 
285 static struct w1_family w1_family_2d = {
286 	.fid = W1_EEPROM_DS2431,
287 	.fops = &w1_f2d_fops,
288 };
289 module_w1_family(w1_family_2d);
290 
291 MODULE_AUTHOR("Bernhard Weirich <bernhard.weirich@riedel.net>");
292 MODULE_DESCRIPTION("w1 family 2d driver for DS2431, 1kb EEPROM");
293 MODULE_LICENSE("GPL");
294 MODULE_ALIAS("w1-family-" __stringify(W1_EEPROM_DS2431));
295