xref: /openbmc/linux/drivers/video/fbdev/via/accel.h (revision 64b70da0)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
4  * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
5 
6  */
7 
8 #ifndef __ACCEL_H__
9 #define __ACCEL_H__
10 
11 #define FB_ACCEL_VIA_UNICHROME  50
12 
13 /* MMIO Base Address Definition */
14 #define MMIO_VGABASE                0x8000
15 #define MMIO_CR_READ                (MMIO_VGABASE + 0x3D4)
16 #define MMIO_CR_WRITE               (MMIO_VGABASE + 0x3D5)
17 #define MMIO_SR_READ                (MMIO_VGABASE + 0x3C4)
18 #define MMIO_SR_WRITE               (MMIO_VGABASE + 0x3C5)
19 
20 /* HW Cursor Status Define */
21 #define HW_Cursor_ON    0
22 #define HW_Cursor_OFF   1
23 
24 #define CURSOR_SIZE     (8 * 1024)
25 #define VQ_SIZE         (256 * 1024)
26 
27 #define VIA_MMIO_BLTBASE        0x200000
28 #define VIA_MMIO_BLTSIZE        0x200000
29 
30 /* Defines for 2D registers */
31 #define VIA_REG_GECMD           0x000
32 #define VIA_REG_GEMODE          0x004
33 #define VIA_REG_SRCPOS          0x008
34 #define VIA_REG_DSTPOS          0x00C
35 /* width and height */
36 #define VIA_REG_DIMENSION       0x010
37 #define VIA_REG_PATADDR         0x014
38 #define VIA_REG_FGCOLOR         0x018
39 #define VIA_REG_BGCOLOR         0x01C
40 /* top and left of clipping */
41 #define VIA_REG_CLIPTL          0x020
42 /* bottom and right of clipping */
43 #define VIA_REG_CLIPBR          0x024
44 #define VIA_REG_OFFSET          0x028
45 /* color key control */
46 #define VIA_REG_KEYCONTROL      0x02C
47 #define VIA_REG_SRCBASE         0x030
48 #define VIA_REG_DSTBASE         0x034
49 /* pitch of src and dst */
50 #define VIA_REG_PITCH           0x038
51 #define VIA_REG_MONOPAT0        0x03C
52 #define VIA_REG_MONOPAT1        0x040
53 /* from 0x100 to 0x1ff */
54 #define VIA_REG_COLORPAT        0x100
55 
56 /* defines for VIA 2D registers for vt3353/3409 (M1 engine)*/
57 #define VIA_REG_GECMD_M1        0x000
58 #define VIA_REG_GEMODE_M1       0x004
59 #define VIA_REG_GESTATUS_M1     0x004       /* as same as VIA_REG_GEMODE */
60 #define VIA_REG_PITCH_M1        0x008       /* pitch of src and dst */
61 #define VIA_REG_DIMENSION_M1    0x00C       /* width and height */
62 #define VIA_REG_DSTPOS_M1       0x010
63 #define VIA_REG_LINE_XY_M1      0x010
64 #define VIA_REG_DSTBASE_M1      0x014
65 #define VIA_REG_SRCPOS_M1       0x018
66 #define VIA_REG_LINE_K1K2_M1    0x018
67 #define VIA_REG_SRCBASE_M1      0x01C
68 #define VIA_REG_PATADDR_M1      0x020
69 #define VIA_REG_MONOPAT0_M1     0x024
70 #define VIA_REG_MONOPAT1_M1     0x028
71 #define VIA_REG_OFFSET_M1       0x02C
72 #define VIA_REG_LINE_ERROR_M1   0x02C
73 #define VIA_REG_CLIPTL_M1       0x040       /* top and left of clipping */
74 #define VIA_REG_CLIPBR_M1       0x044       /* bottom and right of clipping */
75 #define VIA_REG_KEYCONTROL_M1   0x048       /* color key control */
76 #define VIA_REG_FGCOLOR_M1      0x04C
77 #define VIA_REG_DSTCOLORKEY_M1  0x04C       /* as same as VIA_REG_FG */
78 #define VIA_REG_BGCOLOR_M1      0x050
79 #define VIA_REG_SRCCOLORKEY_M1  0x050       /* as same as VIA_REG_BG */
80 #define VIA_REG_MONOPATFGC_M1   0x058       /* Add BG color of Pattern. */
81 #define VIA_REG_MONOPATBGC_M1   0x05C       /* Add FG color of Pattern. */
82 #define VIA_REG_COLORPAT_M1     0x100       /* from 0x100 to 0x1ff */
83 
84 /* VIA_REG_PITCH(0x38): Pitch Setting */
85 #define VIA_PITCH_ENABLE        0x80000000
86 
87 /* defines for VIA HW cursor registers */
88 #define VIA_REG_CURSOR_MODE     0x2D0
89 #define VIA_REG_CURSOR_POS      0x2D4
90 #define VIA_REG_CURSOR_ORG      0x2D8
91 #define VIA_REG_CURSOR_BG       0x2DC
92 #define VIA_REG_CURSOR_FG       0x2E0
93 
94 /* VIA_REG_GEMODE(0x04): GE mode */
95 #define VIA_GEM_8bpp            0x00000000
96 #define VIA_GEM_16bpp           0x00000100
97 #define VIA_GEM_32bpp           0x00000300
98 
99 /* VIA_REG_GECMD(0x00): 2D Engine Command  */
100 #define VIA_GEC_NOOP            0x00000000
101 #define VIA_GEC_BLT             0x00000001
102 #define VIA_GEC_LINE            0x00000005
103 
104 /* Rotate Command */
105 #define VIA_GEC_ROT             0x00000008
106 
107 #define VIA_GEC_SRC_XY          0x00000000
108 #define VIA_GEC_SRC_LINEAR      0x00000010
109 #define VIA_GEC_DST_XY          0x00000000
110 #define VIA_GEC_DST_LINRAT      0x00000020
111 
112 #define VIA_GEC_SRC_FB          0x00000000
113 #define VIA_GEC_SRC_SYS         0x00000040
114 #define VIA_GEC_DST_FB          0x00000000
115 #define VIA_GEC_DST_SYS         0x00000080
116 
117 /* source is mono */
118 #define VIA_GEC_SRC_MONO        0x00000100
119 /* pattern is mono */
120 #define VIA_GEC_PAT_MONO        0x00000200
121 /* mono src is opaque */
122 #define VIA_GEC_MSRC_OPAQUE     0x00000000
123 /* mono src is transparent */
124 #define VIA_GEC_MSRC_TRANS      0x00000400
125 /* pattern is in frame buffer */
126 #define VIA_GEC_PAT_FB          0x00000000
127 /* pattern is from reg setting */
128 #define VIA_GEC_PAT_REG         0x00000800
129 
130 #define VIA_GEC_CLIP_DISABLE    0x00000000
131 #define VIA_GEC_CLIP_ENABLE     0x00001000
132 
133 #define VIA_GEC_FIXCOLOR_PAT    0x00002000
134 
135 #define VIA_GEC_INCX            0x00000000
136 #define VIA_GEC_DECY            0x00004000
137 #define VIA_GEC_INCY            0x00000000
138 #define VIA_GEC_DECX            0x00008000
139 /* mono pattern is opaque */
140 #define VIA_GEC_MPAT_OPAQUE     0x00000000
141 /* mono pattern is transparent */
142 #define VIA_GEC_MPAT_TRANS      0x00010000
143 
144 #define VIA_GEC_MONO_UNPACK     0x00000000
145 #define VIA_GEC_MONO_PACK       0x00020000
146 #define VIA_GEC_MONO_DWORD      0x00000000
147 #define VIA_GEC_MONO_WORD       0x00040000
148 #define VIA_GEC_MONO_BYTE       0x00080000
149 
150 #define VIA_GEC_LASTPIXEL_ON    0x00000000
151 #define VIA_GEC_LASTPIXEL_OFF   0x00100000
152 #define VIA_GEC_X_MAJOR         0x00000000
153 #define VIA_GEC_Y_MAJOR         0x00200000
154 #define VIA_GEC_QUICK_START     0x00800000
155 
156 /* defines for VIA 3D registers */
157 #define VIA_REG_STATUS          0x400
158 #define VIA_REG_CR_TRANSET      0x41C
159 #define VIA_REG_CR_TRANSPACE	0x420
160 #define VIA_REG_TRANSET         0x43C
161 #define VIA_REG_TRANSPACE       0x440
162 
163 /* VIA_REG_STATUS(0x400): Engine Status */
164 
165 /* Command Regulator is busy */
166 #define VIA_CMD_RGTR_BUSY       0x00000080
167 /* 2D Engine is busy */
168 #define VIA_2D_ENG_BUSY         0x00000002
169 /* 3D Engine is busy */
170 #define VIA_3D_ENG_BUSY         0x00000001
171 /* Virtual Queue is busy */
172 #define VIA_VR_QUEUE_BUSY       0x00020000
173 
174 /* VIA_REG_STATUS(0x400): Engine Status for H5 */
175 #define VIA_CMD_RGTR_BUSY_H5   0x00000010  /* Command Regulator is busy */
176 #define VIA_2D_ENG_BUSY_H5     0x00000002  /* 2D Engine is busy */
177 #define VIA_3D_ENG_BUSY_H5     0x00001FE1  /* 3D Engine is busy */
178 #define VIA_VR_QUEUE_BUSY_H5   0x00000004  /* Virtual Queue is busy */
179 
180 /* VIA_REG_STATUS(0x400): Engine Status for VT3353/3409 */
181 #define VIA_CMD_RGTR_BUSY_M1   0x00000010  /* Command Regulator is busy */
182 #define VIA_2D_ENG_BUSY_M1     0x00000002  /* 2D Engine is busy */
183 #define VIA_3D_ENG_BUSY_M1     0x00001FE1  /* 3D Engine is busy */
184 #define VIA_VR_QUEUE_BUSY_M1   0x00000004  /* Virtual Queue is busy */
185 
186 #define MAXLOOP                 0xFFFFFF
187 
188 #define VIA_BITBLT_COLOR	1
189 #define VIA_BITBLT_MONO		2
190 #define VIA_BITBLT_FILL		3
191 
192 int viafb_setup_engine(struct fb_info *info);
193 void viafb_reset_engine(struct viafb_par *viapar);
194 void viafb_show_hw_cursor(struct fb_info *info, int Status);
195 void viafb_wait_engine_idle(struct fb_info *info);
196 
197 #endif /* __ACCEL_H__ */
198