1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * Copyright (c) 2016 MediaTek Inc. 4 * Author: Daniel Hsiao <daniel.hsiao@mediatek.com> 5 * Jungchang Tsao <jungchang.tsao@mediatek.com> 6 * Tiffany Lin <tiffany.lin@mediatek.com> 7 */ 8 9 #ifndef _VENC_DRV_IF_H_ 10 #define _VENC_DRV_IF_H_ 11 12 #include "mtk_vcodec_enc_drv.h" 13 14 /* 15 * enum venc_yuv_fmt - The type of input yuv format 16 * (VPU related: If you change the order, you must also update the VPU codes.) 17 * @VENC_YUV_FORMAT_I420: I420 YUV format 18 * @VENC_YUV_FORMAT_YV12: YV12 YUV format 19 * @VENC_YUV_FORMAT_NV12: NV12 YUV format 20 * @VENC_YUV_FORMAT_NV21: NV21 YUV format 21 */ 22 enum venc_yuv_fmt { 23 VENC_YUV_FORMAT_I420 = 3, 24 VENC_YUV_FORMAT_YV12 = 5, 25 VENC_YUV_FORMAT_NV12 = 6, 26 VENC_YUV_FORMAT_NV21 = 7, 27 }; 28 29 /* 30 * enum venc_start_opt - encode frame option used in venc_if_encode() 31 * @VENC_START_OPT_ENCODE_SEQUENCE_HEADER: encode SPS/PPS for H264 32 * @VENC_START_OPT_ENCODE_FRAME: encode normal frame 33 */ 34 enum venc_start_opt { 35 VENC_START_OPT_ENCODE_SEQUENCE_HEADER, 36 VENC_START_OPT_ENCODE_FRAME, 37 }; 38 39 /* 40 * enum venc_set_param_type - The type of set parameter used in 41 * venc_if_set_param() 42 * (VPU related: If you change the order, you must also update the VPU codes.) 43 * @VENC_SET_PARAM_ENC: set encoder parameters 44 * @VENC_SET_PARAM_FORCE_INTRA: force an intra frame 45 * @VENC_SET_PARAM_ADJUST_BITRATE: adjust bitrate (in bps) 46 * @VENC_SET_PARAM_ADJUST_FRAMERATE: set frame rate 47 * @VENC_SET_PARAM_GOP_SIZE: set IDR interval 48 * @VENC_SET_PARAM_INTRA_PERIOD: set I frame interval 49 * @VENC_SET_PARAM_SKIP_FRAME: set H264 skip one frame 50 * @VENC_SET_PARAM_PREPEND_HEADER: set H264 prepend SPS/PPS before IDR 51 * @VENC_SET_PARAM_TS_MODE: set VP8 temporal scalability mode 52 */ 53 enum venc_set_param_type { 54 VENC_SET_PARAM_ENC, 55 VENC_SET_PARAM_FORCE_INTRA, 56 VENC_SET_PARAM_ADJUST_BITRATE, 57 VENC_SET_PARAM_ADJUST_FRAMERATE, 58 VENC_SET_PARAM_GOP_SIZE, 59 VENC_SET_PARAM_INTRA_PERIOD, 60 VENC_SET_PARAM_SKIP_FRAME, 61 VENC_SET_PARAM_PREPEND_HEADER, 62 VENC_SET_PARAM_TS_MODE, 63 }; 64 65 /* 66 * struct venc_enc_prm - encoder settings for VENC_SET_PARAM_ENC used in 67 * venc_if_set_param() 68 * @input_fourcc: input yuv format 69 * @h264_profile: V4L2 defined H.264 profile 70 * @h264_level: V4L2 defined H.264 level 71 * @width: image width 72 * @height: image height 73 * @buf_width: buffer width 74 * @buf_height: buffer height 75 * @frm_rate: frame rate in fps 76 * @intra_period: intra frame period 77 * @bitrate: target bitrate in bps 78 * @gop_size: group of picture size 79 */ 80 struct venc_enc_param { 81 enum venc_yuv_fmt input_yuv_fmt; 82 unsigned int h264_profile; 83 unsigned int h264_level; 84 unsigned int width; 85 unsigned int height; 86 unsigned int buf_width; 87 unsigned int buf_height; 88 unsigned int frm_rate; 89 unsigned int intra_period; 90 unsigned int bitrate; 91 unsigned int gop_size; 92 }; 93 94 /** 95 * struct venc_frame_info - per-frame information to pass to the firmware. 96 * 97 * @frm_count: sequential number for this frame 98 * @skip_frm_count: number of frames skipped so far while decoding 99 * @frm_type: type of the frame, from enum venc_h264_frame_type 100 */ 101 struct venc_frame_info { 102 unsigned int frm_count; /* per frame update */ 103 unsigned int skip_frm_count; /* per frame update */ 104 unsigned int frm_type; /* per frame update */ 105 }; 106 107 /* 108 * struct venc_frm_buf - frame buffer information used in venc_if_encode() 109 * @fb_addr: plane frame buffer addresses 110 */ 111 struct venc_frm_buf { 112 struct mtk_vcodec_fb fb_addr[MTK_VCODEC_MAX_PLANES]; 113 }; 114 115 /* 116 * struct venc_done_result - This is return information used in venc_if_encode() 117 * @bs_size: output bitstream size 118 * @is_key_frm: output is key frame or not 119 */ 120 struct venc_done_result { 121 unsigned int bs_size; 122 bool is_key_frm; 123 }; 124 125 extern const struct venc_common_if venc_h264_if; 126 extern const struct venc_common_if venc_vp8_if; 127 128 /* 129 * venc_if_init - Create the driver handle 130 * @ctx: device context 131 * @fourcc: encoder input format 132 * Return: 0 if creating handle successfully, otherwise it is failed. 133 */ 134 int venc_if_init(struct mtk_vcodec_enc_ctx *ctx, unsigned int fourcc); 135 136 /* 137 * venc_if_deinit - Release the driver handle 138 * @ctx: device context 139 * Return: 0 if releasing handle successfully, otherwise it is failed. 140 */ 141 int venc_if_deinit(struct mtk_vcodec_enc_ctx *ctx); 142 143 /* 144 * venc_if_set_param - Set parameter to driver 145 * @ctx: device context 146 * @type: parameter type 147 * @in: input parameter 148 * Return: 0 if setting param successfully, otherwise it is failed. 149 */ 150 int venc_if_set_param(struct mtk_vcodec_enc_ctx *ctx, 151 enum venc_set_param_type type, 152 struct venc_enc_param *in); 153 154 /* 155 * venc_if_encode - Encode one frame 156 * @ctx: device context 157 * @opt: encode frame option 158 * @frm_buf: input frame buffer information 159 * @bs_buf: output bitstream buffer infomraiton 160 * @result: encode result 161 * Return: 0 if encoding frame successfully, otherwise it is failed. 162 */ 163 int venc_if_encode(struct mtk_vcodec_enc_ctx *ctx, 164 enum venc_start_opt opt, 165 struct venc_frm_buf *frm_buf, 166 struct mtk_vcodec_mem *bs_buf, 167 struct venc_done_result *result); 168 169 #endif /* _VENC_DRV_IF_H_ */ 170