xref: /openbmc/linux/drivers/usb/storage/Kconfig (revision e46d8cb5)
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Storage driver configuration
4#
5
6comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
7comment "also be needed; see USB_STORAGE Help for more info"
8
9config USB_STORAGE
10	tristate "USB Mass Storage support"
11	depends on SCSI
12	help
13	  Say Y here if you want to connect USB mass storage devices to your
14	  computer's USB port. This is the driver you need for USB
15	  floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
16	  USB flash devices, and memory sticks, along with
17	  similar devices. This driver may also be used for some cameras
18	  and card readers.
19
20	  This option depends on 'SCSI' support being enabled, but you
21	  probably also need 'SCSI device support: SCSI disk support'
22	  (BLK_DEV_SD) for most USB storage devices.
23
24	  To compile this driver as a module, choose M here: the
25	  module will be called usb-storage.
26
27if USB_STORAGE
28
29config USB_STORAGE_DEBUG
30	bool "USB Mass Storage verbose debug"
31	help
32	  Say Y here in order to have the USB Mass Storage code generate
33	  verbose debugging messages.
34
35config USB_STORAGE_REALTEK
36	tristate "Realtek Card Reader support"
37	help
38	  Say Y here to include additional code to support the power-saving function
39	  for Realtek RTS51xx USB card readers.
40
41	  If this driver is compiled as a module, it will be named ums-realtek.
42
43config REALTEK_AUTOPM
44	bool "Realtek Card Reader autosuspend support"
45	depends on USB_STORAGE_REALTEK && PM
46	default y
47
48config USB_STORAGE_DATAFAB
49	tristate "Datafab Compact Flash Reader support"
50	help
51	  Support for certain Datafab CompactFlash readers.
52	  Datafab has a web page at <http://www.datafab.com/>.
53
54	  If this driver is compiled as a module, it will be named ums-datafab.
55
56config USB_STORAGE_FREECOM
57	tristate "Freecom USB/ATAPI Bridge support"
58	help
59	  Support for the Freecom USB to IDE/ATAPI adaptor.
60	  Freecom has a web page at <https://www.freecom.de/>.
61
62	  If this driver is compiled as a module, it will be named ums-freecom.
63
64config USB_STORAGE_ISD200
65	tristate "ISD-200 USB/ATA Bridge support"
66	help
67	  Say Y here if you want to use USB Mass Store devices based
68	  on the In-Systems Design ISD-200 USB/ATA bridge.
69
70	  Some of the products that use this chip are:
71
72	  - Archos Jukebox 6000
73	  - ISD SmartCable for Storage
74	  - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
75	  - Sony CRX10U CD-R/RW drive
76	  - CyQ've CQ8060A CDRW drive
77	  - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
78
79	  If this driver is compiled as a module, it will be named ums-isd200.
80
81config USB_STORAGE_USBAT
82	tristate "USBAT/USBAT02-based storage support"
83	help
84	  Say Y here to include additional code to support storage devices
85	  based on the SCM/Shuttle USBAT/USBAT02 processors.
86
87	  Devices reported to work with this driver include:
88	  - CompactFlash reader included with Kodak DC3800 camera
89	  - Dane-Elec Zmate CompactFlash reader
90	  - Delkin Efilm reader2
91	  - HP 8200e/8210e/8230e CD-Writer Plus drives
92	  - I-JAM JS-50U
93	  - Jessops CompactFlash JESDCFRU BLACK
94	  - Kingston Technology PCREAD-USB/CF
95	  - Maxell UA4 CompactFlash reader
96	  - Memorex UCF-100
97	  - Microtech ZiO! ICS-45 CF2
98	  - RCA LYRA MP3 portable
99	  - Sandisk ImageMate SDDR-05b
100
101	  If this driver is compiled as a module, it will be named ums-usbat.
102
103config USB_STORAGE_SDDR09
104	tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
105	help
106	  Say Y here to include additional code to support the Sandisk SDDR-09
107	  SmartMedia reader in the USB Mass Storage driver.
108	  Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
109
110	  If this driver is compiled as a module, it will be named ums-sddr09.
111
112config USB_STORAGE_SDDR55
113	tristate "SanDisk SDDR-55 SmartMedia support"
114	help
115	  Say Y here to include additional code to support the Sandisk SDDR-55
116	  SmartMedia reader in the USB Mass Storage driver.
117
118	  If this driver is compiled as a module, it will be named ums-sddr55.
119
120config USB_STORAGE_JUMPSHOT
121	tristate "Lexar Jumpshot Compact Flash Reader"
122	help
123	  Say Y here to include additional code to support the Lexar Jumpshot
124	  USB CompactFlash reader.
125
126	  If this driver is compiled as a module, it will be named ums-jumpshot.
127
128config USB_STORAGE_ALAUDA
129	tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
130	help
131	  Say Y here to include additional code to support the Olympus MAUSB-10
132	  and Fujifilm DPC-R1 USB Card reader/writer devices.
133
134	  These devices are based on the Alauda chip and support both
135	  XD and SmartMedia cards.
136
137	  If this driver is compiled as a module, it will be named ums-alauda.
138
139config USB_STORAGE_ONETOUCH
140	tristate "Support OneTouch Button on Maxtor Hard Drives"
141	depends on INPUT=y || INPUT=USB_STORAGE
142	help
143	  Say Y here to include additional code to support the Maxtor OneTouch
144	  USB hard drive's onetouch button.
145
146	  This code registers the button on the front of Maxtor OneTouch USB
147	  hard drive's as an input device. An action can be associated with
148	  this input in any keybinding software. (e.g. gnome's keyboard short-
149	  cuts)
150
151	  If this driver is compiled as a module, it will be named ums-onetouch.
152
153config USB_STORAGE_KARMA
154	tristate "Support for Rio Karma music player"
155	help
156	  Say Y here to include additional code to support the Rio Karma
157	  USB interface.
158
159	  This code places the Rio Karma into mass storage mode, enabling
160	  it to be mounted as an ordinary filesystem. Performing an eject
161	  on the resulting scsi device node returns the Karma to normal
162	  operation.
163
164	  If this driver is compiled as a module, it will be named ums-karma.
165
166config USB_STORAGE_CYPRESS_ATACB
167	tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
168	help
169	  Say Y here if you want to use SAT (ata pass through) on devices based
170	  on the Cypress USB/ATA bridge supporting ATACB. This will allow you
171	  to use tools to tune and monitor your drive (like hdparm or smartctl).
172
173	  If you say no here your device will still work with the standard usb
174	  mass storage class.
175
176	  If this driver is compiled as a module, it will be named ums-cypress.
177
178config USB_STORAGE_ENE_UB6250
179	tristate "USB ENE card reader support"
180	help
181	  Say Y here if you wish to control a ENE SD/MS Card reader.
182	  Note that this driver does not support SM cards.
183
184	  To compile this driver as a module, choose M here: the
185	  module will be called ums-eneub6250.
186
187endif # USB_STORAGE
188
189config USB_UAS
190	tristate "USB Attached SCSI"
191	depends on SCSI && USB_STORAGE
192	help
193	  The USB Attached SCSI protocol is supported by some USB
194	  storage devices.  It permits higher performance by supporting
195	  multiple outstanding commands.
196
197	  If you don't know whether you have a UAS device, it is safe to
198	  say 'Y' or 'M' here and the kernel will use the right driver.
199
200	  If you compile this driver as a module, it will be named uas.
201