1 /*
2  * @section LICENSE
3  * Copyright (c) 2014 Redpine Signals Inc.
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  *
17  */
18 
19 #ifndef __RSI_SDIO_INTF__
20 #define __RSI_SDIO_INTF__
21 
22 #include <linux/mmc/card.h>
23 #include <linux/mmc/mmc.h>
24 #include <linux/mmc/host.h>
25 #include <linux/mmc/sdio_func.h>
26 #include <linux/mmc/sdio.h>
27 #include <linux/mmc/sd.h>
28 #include <linux/mmc/sdio_ids.h>
29 #include "rsi_main.h"
30 
31 enum sdio_interrupt_type {
32 	BUFFER_FULL         = 0x0,
33 	BUFFER_AVAILABLE    = 0x2,
34 	FIRMWARE_ASSERT_IND = 0x3,
35 	MSDU_PACKET_PENDING = 0x4,
36 	UNKNOWN_INT         = 0XE
37 };
38 
39 /* Buffer status register related info */
40 #define PKT_BUFF_SEMI_FULL                      0
41 #define PKT_BUFF_FULL                           1
42 #define PKT_MGMT_BUFF_FULL                      2
43 #define MSDU_PKT_PENDING                        3
44 #define RECV_NUM_BLOCKS                         4
45 /* Interrupt Bit Related Macros */
46 #define PKT_BUFF_AVAILABLE                      1
47 #define FW_ASSERT_IND                           2
48 
49 #define RSI_MASTER_REG_BUF_SIZE			12
50 
51 #define RSI_DEVICE_BUFFER_STATUS_REGISTER       0xf3
52 #define RSI_FN1_INT_REGISTER                    0xf9
53 #define RSI_INT_ENABLE_REGISTER			0x04
54 #define RSI_INT_ENABLE_MASK			0xfc
55 #define RSI_SD_REQUEST_MASTER                   0x10000
56 
57 /* FOR SD CARD ONLY */
58 #define SDIO_RX_NUM_BLOCKS_REG                  0x000F1
59 #define SDIO_FW_STATUS_REG                      0x000F2
60 #define SDIO_NXT_RD_DELAY2                      0x000F5
61 #define SDIO_MASTER_ACCESS_MSBYTE               0x000FA
62 #define SDIO_MASTER_ACCESS_LSBYTE               0x000FB
63 #define SDIO_READ_START_LVL                     0x000FC
64 #define SDIO_READ_FIFO_CTL                      0x000FD
65 #define SDIO_WRITE_FIFO_CTL                     0x000FE
66 #define SDIO_WAKEUP_REG				0x000FF
67 #define SDIO_FUN1_INTR_CLR_REG                  0x0008
68 #define SDIO_REG_HIGH_SPEED                     0x0013
69 
70 #define RSI_GET_SDIO_INTERRUPT_TYPE(_I, TYPE)      \
71 	{					   \
72 		TYPE =                             \
73 		(_I & (1 << PKT_BUFF_AVAILABLE)) ? \
74 		BUFFER_AVAILABLE :		   \
75 		(_I & (1 << MSDU_PKT_PENDING)) ?   \
76 		MSDU_PACKET_PENDING :              \
77 		(_I & (1 << FW_ASSERT_IND)) ?      \
78 		FIRMWARE_ASSERT_IND : UNKNOWN_INT; \
79 	}
80 
81 /* common registers in SDIO function1 */
82 #define TA_SOFT_RESET_REG            0x0004
83 #define TA_TH0_PC_REG                0x0400
84 #define TA_HOLD_THREAD_REG           0x0844
85 #define TA_RELEASE_THREAD_REG        0x0848
86 
87 #define TA_SOFT_RST_CLR              0
88 #define TA_SOFT_RST_SET              BIT(0)
89 #define TA_PC_ZERO                   0
90 #define TA_HOLD_THREAD_VALUE         0xF
91 #define TA_RELEASE_THREAD_VALUE      0xF
92 #define TA_BASE_ADDR                 0x2200
93 #define MISC_CFG_BASE_ADDR           0x4105
94 
95 struct receive_info {
96 	bool buffer_full;
97 	bool semi_buffer_full;
98 	bool mgmt_buffer_full;
99 	u32 mgmt_buf_full_counter;
100 	u32 buf_semi_full_counter;
101 	u8 watch_bufferfull_count;
102 	u32 sdio_intr_status_zero;
103 	u32 sdio_int_counter;
104 	u32 total_sdio_msdu_pending_intr;
105 	u32 total_sdio_unknown_intr;
106 	u32 buf_full_counter;
107 	u32 buf_available_counter;
108 };
109 
110 struct rsi_91x_sdiodev {
111 	struct sdio_func *pfunction;
112 	struct task_struct *sdio_irq_task;
113 	struct receive_info rx_info;
114 	u32 next_read_delay;
115 	u32 sdio_high_speed_enable;
116 	u8 sdio_clock_speed;
117 	u32 cardcapability;
118 	u8 prev_desc[16];
119 	u16 tx_blk_size;
120 	u8 write_fail;
121 	bool buff_status_updated;
122 	struct rsi_thread rx_thread;
123 	u8 pktbuffer[8192] __aligned(4);
124 };
125 
126 int rsi_init_sdio_slave_regs(struct rsi_hw *adapter);
127 int rsi_sdio_read_register(struct rsi_hw *adapter, u32 addr, u8 *data);
128 int rsi_sdio_host_intf_read_pkt(struct rsi_hw *adapter, u8 *pkt, u32 length);
129 int rsi_sdio_write_register(struct rsi_hw *adapter, u8 function,
130 			    u32 addr, u8 *data);
131 int rsi_sdio_write_register_multiple(struct rsi_hw *adapter, u32 addr,
132 				     u8 *data, u16 count);
133 int rsi_sdio_master_access_msword(struct rsi_hw *adapter, u16 ms_word);
134 void rsi_sdio_ack_intr(struct rsi_hw *adapter, u8 int_bit);
135 int rsi_sdio_determine_event_timeout(struct rsi_hw *adapter);
136 int rsi_sdio_check_buffer_status(struct rsi_hw *adapter, u8 q_num);
137 void rsi_sdio_rx_thread(struct rsi_common *common);
138 #endif
139