1 /*
2     ivtv driver internal defines and structures
3     Copyright (C) 2003-2004  Kevin Thayer <nufan_wfk at yahoo.com>
4     Copyright (C) 2004  Chris Kennedy <c@groovy.org>
5     Copyright (C) 2005-2007  Hans Verkuil <hverkuil@xs4all.nl>
6 
7     This program is free software; you can redistribute it and/or modify
8     it under the terms of the GNU General Public License as published by
9     the Free Software Foundation; either version 2 of the License, or
10     (at your option) any later version.
11 
12     This program is distributed in the hope that it will be useful,
13     but WITHOUT ANY WARRANTY; without even the implied warranty of
14     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15     GNU General Public License for more details.
16 
17     You should have received a copy of the GNU General Public License
18     along with this program; if not, write to the Free Software
19     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
20  */
21 
22 #ifndef IVTV_DRIVER_H
23 #define IVTV_DRIVER_H
24 
25 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
26 
27 /* Internal header for ivtv project:
28  * Driver for the cx23415/6 chip.
29  * Author: Kevin Thayer (nufan_wfk at yahoo.com)
30  * License: GPL
31  *
32  * -----
33  * MPG600/MPG160 support by  T.Adachi <tadachi@tadachi-net.com>
34  *                      and Takeru KOMORIYA<komoriya@paken.org>
35  *
36  * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
37  *                using information provided by Jiun-Kuei Jung @ AVerMedia.
38  */
39 
40 #include <linux/module.h>
41 #include <linux/init.h>
42 #include <linux/delay.h>
43 #include <linux/sched/signal.h>
44 #include <linux/fs.h>
45 #include <linux/pci.h>
46 #include <linux/interrupt.h>
47 #include <linux/spinlock.h>
48 #include <linux/i2c.h>
49 #include <linux/i2c-algo-bit.h>
50 #include <linux/list.h>
51 #include <linux/unistd.h>
52 #include <linux/pagemap.h>
53 #include <linux/scatterlist.h>
54 #include <linux/kthread.h>
55 #include <linux/mutex.h>
56 #include <linux/slab.h>
57 #include <linux/uaccess.h>
58 #include <asm/byteorder.h>
59 
60 #include <media/v4l2-common.h>
61 #include <media/v4l2-ioctl.h>
62 #include <media/v4l2-ctrls.h>
63 #include <media/v4l2-device.h>
64 #include <media/v4l2-fh.h>
65 #include <media/tuner.h>
66 #include <media/drv-intf/cx2341x.h>
67 #include <media/i2c/ir-kbd-i2c.h>
68 
69 #include <linux/ivtv.h>
70 
71 /* Memory layout */
72 #define IVTV_ENCODER_OFFSET	0x00000000
73 #define IVTV_ENCODER_SIZE	0x00800000	/* Total size is 0x01000000, but only first half is used */
74 #define IVTV_DECODER_OFFSET	0x01000000
75 #define IVTV_DECODER_SIZE	0x00800000	/* Total size is 0x01000000, but only first half is used */
76 #define IVTV_REG_OFFSET		0x02000000
77 #define IVTV_REG_SIZE		0x00010000
78 
79 /* Maximum ivtv driver instances. Some people have a huge number of
80    capture cards, so set this to a high value. */
81 #define IVTV_MAX_CARDS 32
82 
83 #define IVTV_ENC_STREAM_TYPE_MPG  0
84 #define IVTV_ENC_STREAM_TYPE_YUV  1
85 #define IVTV_ENC_STREAM_TYPE_VBI  2
86 #define IVTV_ENC_STREAM_TYPE_PCM  3
87 #define IVTV_ENC_STREAM_TYPE_RAD  4
88 #define IVTV_DEC_STREAM_TYPE_MPG  5
89 #define IVTV_DEC_STREAM_TYPE_VBI  6
90 #define IVTV_DEC_STREAM_TYPE_VOUT 7
91 #define IVTV_DEC_STREAM_TYPE_YUV  8
92 #define IVTV_MAX_STREAMS	  9
93 
94 #define IVTV_DMA_SG_OSD_ENT	(2883584/PAGE_SIZE)	/* sg entities */
95 
96 /* DMA Registers */
97 #define IVTV_REG_DMAXFER	(0x0000)
98 #define IVTV_REG_DMASTATUS	(0x0004)
99 #define IVTV_REG_DECDMAADDR	(0x0008)
100 #define IVTV_REG_ENCDMAADDR	(0x000c)
101 #define IVTV_REG_DMACONTROL	(0x0010)
102 #define IVTV_REG_IRQSTATUS	(0x0040)
103 #define IVTV_REG_IRQMASK	(0x0048)
104 
105 /* Setup Registers */
106 #define IVTV_REG_ENC_SDRAM_REFRESH	(0x07F8)
107 #define IVTV_REG_ENC_SDRAM_PRECHARGE	(0x07FC)
108 #define IVTV_REG_DEC_SDRAM_REFRESH	(0x08F8)
109 #define IVTV_REG_DEC_SDRAM_PRECHARGE	(0x08FC)
110 #define IVTV_REG_VDM			(0x2800)
111 #define IVTV_REG_AO			(0x2D00)
112 #define IVTV_REG_BYTEFLUSH		(0x2D24)
113 #define IVTV_REG_SPU			(0x9050)
114 #define IVTV_REG_HW_BLOCKS		(0x9054)
115 #define IVTV_REG_VPU			(0x9058)
116 #define IVTV_REG_APU			(0xA064)
117 
118 /* Other registers */
119 #define IVTV_REG_DEC_LINE_FIELD		(0x28C0)
120 
121 /* debugging */
122 extern int ivtv_debug;
123 #ifdef CONFIG_VIDEO_ADV_DEBUG
124 extern int ivtv_fw_debug;
125 #endif
126 
127 #define IVTV_DBGFLG_WARN    (1 << 0)
128 #define IVTV_DBGFLG_INFO    (1 << 1)
129 #define IVTV_DBGFLG_MB      (1 << 2)
130 #define IVTV_DBGFLG_IOCTL   (1 << 3)
131 #define IVTV_DBGFLG_FILE    (1 << 4)
132 #define IVTV_DBGFLG_DMA     (1 << 5)
133 #define IVTV_DBGFLG_IRQ     (1 << 6)
134 #define IVTV_DBGFLG_DEC     (1 << 7)
135 #define IVTV_DBGFLG_YUV     (1 << 8)
136 #define IVTV_DBGFLG_I2C     (1 << 9)
137 /* Flag to turn on high volume debugging */
138 #define IVTV_DBGFLG_HIGHVOL (1 << 10)
139 
140 #define IVTV_DEBUG(x, type, fmt, args...) \
141 	do { \
142 		if ((x) & ivtv_debug) \
143 			v4l2_info(&itv->v4l2_dev, " " type ": " fmt , ##args);	\
144 	} while (0)
145 #define IVTV_DEBUG_WARN(fmt, args...)  IVTV_DEBUG(IVTV_DBGFLG_WARN,  "warn",  fmt , ## args)
146 #define IVTV_DEBUG_INFO(fmt, args...)  IVTV_DEBUG(IVTV_DBGFLG_INFO,  "info",  fmt , ## args)
147 #define IVTV_DEBUG_MB(fmt, args...)    IVTV_DEBUG(IVTV_DBGFLG_MB,    "mb",    fmt , ## args)
148 #define IVTV_DEBUG_DMA(fmt, args...)   IVTV_DEBUG(IVTV_DBGFLG_DMA,   "dma",   fmt , ## args)
149 #define IVTV_DEBUG_IOCTL(fmt, args...) IVTV_DEBUG(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args)
150 #define IVTV_DEBUG_FILE(fmt, args...)  IVTV_DEBUG(IVTV_DBGFLG_FILE,  "file",  fmt , ## args)
151 #define IVTV_DEBUG_I2C(fmt, args...)   IVTV_DEBUG(IVTV_DBGFLG_I2C,   "i2c",   fmt , ## args)
152 #define IVTV_DEBUG_IRQ(fmt, args...)   IVTV_DEBUG(IVTV_DBGFLG_IRQ,   "irq",   fmt , ## args)
153 #define IVTV_DEBUG_DEC(fmt, args...)   IVTV_DEBUG(IVTV_DBGFLG_DEC,   "dec",   fmt , ## args)
154 #define IVTV_DEBUG_YUV(fmt, args...)   IVTV_DEBUG(IVTV_DBGFLG_YUV,   "yuv",   fmt , ## args)
155 
156 #define IVTV_DEBUG_HIGH_VOL(x, type, fmt, args...) \
157 	do { \
158 		if (((x) & ivtv_debug) && (ivtv_debug & IVTV_DBGFLG_HIGHVOL))	\
159 			v4l2_info(&itv->v4l2_dev, " " type ": " fmt , ##args);	\
160 	} while (0)
161 #define IVTV_DEBUG_HI_WARN(fmt, args...)  IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_WARN,  "warn",  fmt , ## args)
162 #define IVTV_DEBUG_HI_INFO(fmt, args...)  IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_INFO,  "info",  fmt , ## args)
163 #define IVTV_DEBUG_HI_MB(fmt, args...)    IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_MB,    "mb",    fmt , ## args)
164 #define IVTV_DEBUG_HI_DMA(fmt, args...)   IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DMA,   "dma",   fmt , ## args)
165 #define IVTV_DEBUG_HI_IOCTL(fmt, args...) IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IOCTL, "ioctl", fmt , ## args)
166 #define IVTV_DEBUG_HI_FILE(fmt, args...)  IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_FILE,  "file",  fmt , ## args)
167 #define IVTV_DEBUG_HI_I2C(fmt, args...)   IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_I2C,   "i2c",   fmt , ## args)
168 #define IVTV_DEBUG_HI_IRQ(fmt, args...)   IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_IRQ,   "irq",   fmt , ## args)
169 #define IVTV_DEBUG_HI_DEC(fmt, args...)   IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_DEC,   "dec",   fmt , ## args)
170 #define IVTV_DEBUG_HI_YUV(fmt, args...)   IVTV_DEBUG_HIGH_VOL(IVTV_DBGFLG_YUV,   "yuv",   fmt , ## args)
171 
172 /* Standard kernel messages */
173 #define IVTV_ERR(fmt, args...)      v4l2_err(&itv->v4l2_dev, fmt , ## args)
174 #define IVTV_WARN(fmt, args...)     v4l2_warn(&itv->v4l2_dev, fmt , ## args)
175 #define IVTV_INFO(fmt, args...)     v4l2_info(&itv->v4l2_dev, fmt , ## args)
176 
177 /* output modes (cx23415 only) */
178 #define OUT_NONE        0
179 #define OUT_MPG         1
180 #define OUT_YUV         2
181 #define OUT_UDMA_YUV    3
182 #define OUT_PASSTHROUGH 4
183 
184 #define IVTV_MAX_PGM_INDEX (400)
185 
186 /* Default I2C SCL period in microseconds */
187 #define IVTV_DEFAULT_I2C_CLOCK_PERIOD	20
188 
189 struct ivtv_options {
190 	int kilobytes[IVTV_MAX_STREAMS];        /* size in kilobytes of each stream */
191 	int cardtype;				/* force card type on load */
192 	int tuner;				/* set tuner on load */
193 	int radio;				/* enable/disable radio */
194 	int newi2c;				/* new I2C algorithm */
195 	int i2c_clock_period;			/* period of SCL for I2C bus */
196 };
197 
198 /* ivtv-specific mailbox template */
199 struct ivtv_mailbox {
200 	u32 flags;
201 	u32 cmd;
202 	u32 retval;
203 	u32 timeout;
204 	u32 data[CX2341X_MBOX_MAX_DATA];
205 };
206 
207 struct ivtv_api_cache {
208 	unsigned long last_jiffies;		/* when last command was issued */
209 	u32 data[CX2341X_MBOX_MAX_DATA];	/* last sent api data */
210 };
211 
212 struct ivtv_mailbox_data {
213 	volatile struct ivtv_mailbox __iomem *mbox;
214 	/* Bits 0-2 are for the encoder mailboxes, 0-1 are for the decoder mailboxes.
215 	   If the bit is set, then the corresponding mailbox is in use by the driver. */
216 	unsigned long busy;
217 	u8 max_mbox;
218 };
219 
220 /* per-buffer bit flags */
221 #define IVTV_F_B_NEED_BUF_SWAP  (1 << 0)	/* this buffer should be byte swapped */
222 
223 /* per-stream, s_flags */
224 #define IVTV_F_S_DMA_PENDING	0	/* this stream has pending DMA */
225 #define IVTV_F_S_DMA_HAS_VBI	1       /* the current DMA request also requests VBI data */
226 #define IVTV_F_S_NEEDS_DATA	2	/* this decoding stream needs more data */
227 
228 #define IVTV_F_S_CLAIMED	3	/* this stream is claimed */
229 #define IVTV_F_S_STREAMING      4	/* the fw is decoding/encoding this stream */
230 #define IVTV_F_S_INTERNAL_USE	5	/* this stream is used internally (sliced VBI processing) */
231 #define IVTV_F_S_PASSTHROUGH	6	/* this stream is in passthrough mode */
232 #define IVTV_F_S_STREAMOFF	7	/* signal end of stream EOS */
233 #define IVTV_F_S_APPL_IO        8	/* this stream is used read/written by an application */
234 
235 #define IVTV_F_S_PIO_PENDING	9	/* this stream has pending PIO */
236 #define IVTV_F_S_PIO_HAS_VBI	1       /* the current PIO request also requests VBI data */
237 
238 /* per-ivtv, i_flags */
239 #define IVTV_F_I_DMA		   0	/* DMA in progress */
240 #define IVTV_F_I_UDMA		   1	/* UDMA in progress */
241 #define IVTV_F_I_UDMA_PENDING	   2	/* UDMA pending */
242 #define IVTV_F_I_SPEED_CHANGE	   3	/* a speed change is in progress */
243 #define IVTV_F_I_EOS		   4	/* end of encoder stream reached */
244 #define IVTV_F_I_RADIO_USER	   5	/* the radio tuner is selected */
245 #define IVTV_F_I_DIG_RST	   6	/* reset digitizer */
246 #define IVTV_F_I_DEC_YUV	   7	/* YUV instead of MPG is being decoded */
247 #define IVTV_F_I_UPDATE_CC	   9	/* CC should be updated */
248 #define IVTV_F_I_UPDATE_WSS	   10	/* WSS should be updated */
249 #define IVTV_F_I_UPDATE_VPS	   11	/* VPS should be updated */
250 #define IVTV_F_I_DECODING_YUV	   12	/* this stream is YUV frame decoding */
251 #define IVTV_F_I_ENC_PAUSED	   13	/* the encoder is paused */
252 #define IVTV_F_I_VALID_DEC_TIMINGS 14	/* last_dec_timing is valid */
253 #define IVTV_F_I_HAVE_WORK	   15	/* used in the interrupt handler: there is work to be done */
254 #define IVTV_F_I_WORK_HANDLER_VBI  16	/* there is work to be done for VBI */
255 #define IVTV_F_I_WORK_HANDLER_YUV  17	/* there is work to be done for YUV */
256 #define IVTV_F_I_WORK_HANDLER_PIO  18	/* there is work to be done for PIO */
257 #define IVTV_F_I_PIO		   19	/* PIO in progress */
258 #define IVTV_F_I_DEC_PAUSED	   20	/* the decoder is paused */
259 #define IVTV_F_I_INITED		   21	/* set after first open */
260 #define IVTV_F_I_FAILED		   22	/* set if first open failed */
261 #define IVTV_F_I_WORK_HANDLER_PCM  23	/* there is work to be done for PCM */
262 
263 /* Event notifications */
264 #define IVTV_F_I_EV_DEC_STOPPED	   28	/* decoder stopped event */
265 #define IVTV_F_I_EV_VSYNC	   29	/* VSYNC event */
266 #define IVTV_F_I_EV_VSYNC_FIELD    30	/* VSYNC event field (0 = first, 1 = second field) */
267 #define IVTV_F_I_EV_VSYNC_ENABLED  31	/* VSYNC event enabled */
268 
269 /* Scatter-Gather array element, used in DMA transfers */
270 struct ivtv_sg_element {
271 	__le32 src;
272 	__le32 dst;
273 	__le32 size;
274 };
275 
276 struct ivtv_sg_host_element {
277 	u32 src;
278 	u32 dst;
279 	u32 size;
280 };
281 
282 struct ivtv_user_dma {
283 	struct mutex lock;
284 	int page_count;
285 	struct page *map[IVTV_DMA_SG_OSD_ENT];
286 	/* Needed when dealing with highmem userspace buffers */
287 	struct page *bouncemap[IVTV_DMA_SG_OSD_ENT];
288 
289 	/* Base Dev SG Array for cx23415/6 */
290 	struct ivtv_sg_element SGarray[IVTV_DMA_SG_OSD_ENT];
291 	dma_addr_t SG_handle;
292 	int SG_length;
293 
294 	/* SG List of Buffers */
295 	struct scatterlist SGlist[IVTV_DMA_SG_OSD_ENT];
296 };
297 
298 struct ivtv_dma_page_info {
299 	unsigned long uaddr;
300 	unsigned long first;
301 	unsigned long last;
302 	unsigned int offset;
303 	unsigned int tail;
304 	int page_count;
305 };
306 
307 struct ivtv_buffer {
308 	struct list_head list;
309 	dma_addr_t dma_handle;
310 	unsigned short b_flags;
311 	unsigned short dma_xfer_cnt;
312 	char *buf;
313 	u32 bytesused;
314 	u32 readpos;
315 };
316 
317 struct ivtv_queue {
318 	struct list_head list;          /* the list of buffers in this queue */
319 	u32 buffers;                    /* number of buffers in this queue */
320 	u32 length;                     /* total number of bytes of available buffer space */
321 	u32 bytesused;                  /* total number of bytes used in this queue */
322 };
323 
324 struct ivtv;				/* forward reference */
325 
326 struct ivtv_stream {
327 	/* These first four fields are always set, even if the stream
328 	   is not actually created. */
329 	struct video_device vdev;	/* vdev.v4l2_dev is NULL if there is no device */
330 	struct ivtv *itv;		/* for ease of use */
331 	const char *name;		/* name of the stream */
332 	int type;			/* stream type */
333 
334 	struct v4l2_fh *fh;		/* pointer to the streaming filehandle */
335 	spinlock_t qlock;		/* locks access to the queues */
336 	unsigned long s_flags;		/* status flags, see above */
337 	int dma;			/* can be PCI_DMA_TODEVICE, PCI_DMA_FROMDEVICE or PCI_DMA_NONE */
338 	u32 pending_offset;
339 	u32 pending_backup;
340 	u64 pending_pts;
341 
342 	u32 dma_offset;
343 	u32 dma_backup;
344 	u64 dma_pts;
345 
346 	int subtype;
347 	wait_queue_head_t waitq;
348 	u32 dma_last_offset;
349 
350 	/* Buffer Stats */
351 	u32 buffers;
352 	u32 buf_size;
353 	u32 buffers_stolen;
354 
355 	/* Buffer Queues */
356 	struct ivtv_queue q_free;	/* free buffers */
357 	struct ivtv_queue q_full;	/* full buffers */
358 	struct ivtv_queue q_io;		/* waiting for I/O */
359 	struct ivtv_queue q_dma;	/* waiting for DMA */
360 	struct ivtv_queue q_predma;	/* waiting for DMA */
361 
362 	/* DMA xfer counter, buffers belonging to the same DMA
363 	   xfer will have the same dma_xfer_cnt. */
364 	u16 dma_xfer_cnt;
365 
366 	/* Base Dev SG Array for cx23415/6 */
367 	struct ivtv_sg_host_element *sg_pending;
368 	struct ivtv_sg_host_element *sg_processing;
369 	struct ivtv_sg_element *sg_dma;
370 	dma_addr_t sg_handle;
371 	int sg_pending_size;
372 	int sg_processing_size;
373 	int sg_processed;
374 
375 	/* SG List of Buffers */
376 	struct scatterlist *SGlist;
377 };
378 
379 struct ivtv_open_id {
380 	struct v4l2_fh fh;
381 	int type;                       /* stream type */
382 	int yuv_frames;                 /* 1: started OUT_UDMA_YUV output mode */
383 	struct ivtv *itv;
384 };
385 
fh2id(struct v4l2_fh * fh)386 static inline struct ivtv_open_id *fh2id(struct v4l2_fh *fh)
387 {
388 	return container_of(fh, struct ivtv_open_id, fh);
389 }
390 
391 struct yuv_frame_info
392 {
393 	u32 update;
394 	s32 src_x;
395 	s32 src_y;
396 	u32 src_w;
397 	u32 src_h;
398 	s32 dst_x;
399 	s32 dst_y;
400 	u32 dst_w;
401 	u32 dst_h;
402 	s32 pan_x;
403 	s32 pan_y;
404 	u32 vis_w;
405 	u32 vis_h;
406 	u32 interlaced_y;
407 	u32 interlaced_uv;
408 	s32 tru_x;
409 	u32 tru_w;
410 	u32 tru_h;
411 	u32 offset_y;
412 	s32 lace_mode;
413 	u32 sync_field;
414 	u32 delay;
415 	u32 interlaced;
416 };
417 
418 #define IVTV_YUV_MODE_INTERLACED	0x00
419 #define IVTV_YUV_MODE_PROGRESSIVE	0x01
420 #define IVTV_YUV_MODE_AUTO		0x02
421 #define IVTV_YUV_MODE_MASK		0x03
422 
423 #define IVTV_YUV_SYNC_EVEN		0x00
424 #define IVTV_YUV_SYNC_ODD		0x04
425 #define IVTV_YUV_SYNC_MASK		0x04
426 
427 #define IVTV_YUV_BUFFERS 8
428 
429 struct yuv_playback_info
430 {
431 	u32 reg_2834;
432 	u32 reg_2838;
433 	u32 reg_283c;
434 	u32 reg_2840;
435 	u32 reg_2844;
436 	u32 reg_2848;
437 	u32 reg_2854;
438 	u32 reg_285c;
439 	u32 reg_2864;
440 
441 	u32 reg_2870;
442 	u32 reg_2874;
443 	u32 reg_2890;
444 	u32 reg_2898;
445 	u32 reg_289c;
446 
447 	u32 reg_2918;
448 	u32 reg_291c;
449 	u32 reg_2920;
450 	u32 reg_2924;
451 	u32 reg_2928;
452 	u32 reg_292c;
453 	u32 reg_2930;
454 
455 	u32 reg_2934;
456 
457 	u32 reg_2938;
458 	u32 reg_293c;
459 	u32 reg_2940;
460 	u32 reg_2944;
461 	u32 reg_2948;
462 	u32 reg_294c;
463 	u32 reg_2950;
464 	u32 reg_2954;
465 	u32 reg_2958;
466 	u32 reg_295c;
467 	u32 reg_2960;
468 	u32 reg_2964;
469 	u32 reg_2968;
470 	u32 reg_296c;
471 
472 	u32 reg_2970;
473 
474 	int v_filter_1;
475 	int v_filter_2;
476 	int h_filter;
477 
478 	u8 track_osd; /* Should yuv output track the OSD size & position */
479 
480 	u32 osd_x_offset;
481 	u32 osd_y_offset;
482 
483 	u32 osd_x_pan;
484 	u32 osd_y_pan;
485 
486 	u32 osd_vis_w;
487 	u32 osd_vis_h;
488 
489 	u32 osd_full_w;
490 	u32 osd_full_h;
491 
492 	int decode_height;
493 
494 	int lace_mode;
495 	int lace_threshold;
496 	int lace_sync_field;
497 
498 	atomic_t next_dma_frame;
499 	atomic_t next_fill_frame;
500 
501 	u32 yuv_forced_update;
502 	int update_frame;
503 
504 	u8 fields_lapsed;   /* Counter used when delaying a frame */
505 
506 	struct yuv_frame_info new_frame_info[IVTV_YUV_BUFFERS];
507 	struct yuv_frame_info old_frame_info;
508 	struct yuv_frame_info old_frame_info_args;
509 
510 	void *blanking_ptr;
511 	dma_addr_t blanking_dmaptr;
512 
513 	int stream_size;
514 
515 	u8 draw_frame; /* PVR350 buffer to draw into */
516 	u8 max_frames_buffered; /* Maximum number of frames to buffer */
517 
518 	struct v4l2_rect main_rect;
519 	u32 v4l2_src_w;
520 	u32 v4l2_src_h;
521 
522 	u8 running; /* Have any frames been displayed */
523 };
524 
525 #define IVTV_VBI_FRAMES 32
526 
527 /* VBI data */
528 struct vbi_cc {
529 	u8 odd[2];	/* two-byte payload of odd field */
530 	u8 even[2];	/* two-byte payload of even field */;
531 };
532 
533 struct vbi_vps {
534 	u8 data[5];	/* five-byte VPS payload */
535 };
536 
537 struct vbi_info {
538 	/* VBI general data, does not change during streaming */
539 
540 	u32 raw_decoder_line_size;              /* raw VBI line size from digitizer */
541 	u8 raw_decoder_sav_odd_field;           /* raw VBI Start Active Video digitizer code of odd field */
542 	u8 raw_decoder_sav_even_field;          /* raw VBI Start Active Video digitizer code of even field */
543 	u32 sliced_decoder_line_size;           /* sliced VBI line size from digitizer */
544 	u8 sliced_decoder_sav_odd_field;        /* sliced VBI Start Active Video digitizer code of odd field */
545 	u8 sliced_decoder_sav_even_field;       /* sliced VBI Start Active Video digitizer code of even field */
546 
547 	u32 start[2];				/* start of first VBI line in the odd/even fields */
548 	u32 count;				/* number of VBI lines per field */
549 	u32 raw_size;				/* size of raw VBI line from the digitizer */
550 	u32 sliced_size;			/* size of sliced VBI line from the digitizer */
551 
552 	u32 dec_start;				/* start in decoder memory of VBI re-insertion buffers */
553 	u32 enc_start;				/* start in encoder memory of VBI capture buffers */
554 	u32 enc_size;				/* size of VBI capture area */
555 	int fpi;				/* number of VBI frames per interrupt */
556 
557 	struct v4l2_format in;			/* current VBI capture format */
558 	struct v4l2_sliced_vbi_format *sliced_in; /* convenience pointer to sliced struct in vbi.in union */
559 	int insert_mpeg;			/* if non-zero, then embed VBI data in MPEG stream */
560 
561 	/* Raw VBI compatibility hack */
562 
563 	u32 frame;				/* frame counter hack needed for backwards compatibility
564 						   of old VBI software */
565 
566 	/* Sliced VBI output data */
567 
568 	struct vbi_cc cc_payload[256];		/* sliced VBI CC payload array: it is an array to
569 						   prevent dropping CC data if they couldn't be
570 						   processed fast enough */
571 	int cc_payload_idx;			/* index in cc_payload */
572 	u8 cc_missing_cnt;			/* counts number of frames without CC for passthrough mode */
573 	int wss_payload;			/* sliced VBI WSS payload */
574 	u8 wss_missing_cnt;			/* counts number of frames without WSS for passthrough mode */
575 	struct vbi_vps vps_payload;		/* sliced VBI VPS payload */
576 
577 	/* Sliced VBI capture data */
578 
579 	struct v4l2_sliced_vbi_data sliced_data[36];	/* sliced VBI storage for VBI encoder stream */
580 	struct v4l2_sliced_vbi_data sliced_dec_data[36];/* sliced VBI storage for VBI decoder stream */
581 
582 	/* VBI Embedding data */
583 
584 	/* Buffer for VBI data inserted into MPEG stream.
585 	   The first byte is a dummy byte that's never used.
586 	   The next 16 bytes contain the MPEG header for the VBI data,
587 	   the remainder is the actual VBI data.
588 	   The max size accepted by the MPEG VBI reinsertion turns out
589 	   to be 1552 bytes, which happens to be 4 + (1 + 42) * (2 * 18) bytes,
590 	   where 4 is a four byte header, 42 is the max sliced VBI payload, 1 is
591 	   a single line header byte and 2 * 18 is the number of VBI lines per frame.
592 
593 	   However, it seems that the data must be 1K aligned, so we have to
594 	   pad the data until the 1 or 2 K boundary.
595 
596 	   This pointer array will allocate 2049 bytes to store each VBI frame. */
597 	u8 *sliced_mpeg_data[IVTV_VBI_FRAMES];
598 	u32 sliced_mpeg_size[IVTV_VBI_FRAMES];
599 	struct ivtv_buffer sliced_mpeg_buf;	/* temporary buffer holding data from sliced_mpeg_data */
600 	u32 inserted_frame;			/* index in sliced_mpeg_size of next sliced data
601 						   to be inserted in the MPEG stream */
602 };
603 
604 /* forward declaration of struct defined in ivtv-cards.h */
605 struct ivtv_card;
606 
607 /* Struct to hold info about ivtv cards */
608 struct ivtv {
609 	/* General fixed card data */
610 	struct pci_dev *pdev;		/* PCI device */
611 	const struct ivtv_card *card;	/* card information */
612 	const char *card_name;          /* full name of the card */
613 	const struct ivtv_card_tuner_i2c *card_i2c; /* i2c addresses to probe for tuner */
614 	u8 has_cx23415;			/* 1 if it is a cx23415 based card, 0 for cx23416 */
615 	u8 pvr150_workaround;           /* 1 if the cx25840 needs to workaround a PVR150 bug */
616 	u8 nof_inputs;			/* number of video inputs */
617 	u8 nof_audio_inputs;		/* number of audio inputs */
618 	u32 v4l2_cap;			/* V4L2 capabilities of card */
619 	u32 hw_flags;			/* hardware description of the board */
620 	v4l2_std_id tuner_std;		/* the norm of the card's tuner (fixed) */
621 	struct v4l2_subdev *sd_video;	/* controlling video decoder subdev */
622 	struct v4l2_subdev *sd_audio;	/* controlling audio subdev */
623 	struct v4l2_subdev *sd_muxer;	/* controlling audio muxer subdev */
624 	resource_size_t base_addr;      /* PCI resource base address */
625 	volatile void __iomem *enc_mem; /* pointer to mapped encoder memory */
626 	volatile void __iomem *dec_mem; /* pointer to mapped decoder memory */
627 	volatile void __iomem *reg_mem; /* pointer to mapped registers */
628 	struct ivtv_options options;	/* user options */
629 
630 	struct v4l2_device v4l2_dev;
631 	struct cx2341x_handler cxhdl;
632 	struct {
633 		/* PTS/Frame count control cluster */
634 		struct v4l2_ctrl *ctrl_pts;
635 		struct v4l2_ctrl *ctrl_frame;
636 	};
637 	struct {
638 		/* Audio Playback control cluster */
639 		struct v4l2_ctrl *ctrl_audio_playback;
640 		struct v4l2_ctrl *ctrl_audio_multilingual_playback;
641 	};
642 	struct v4l2_ctrl_handler hdl_gpio;
643 	struct v4l2_subdev sd_gpio;	/* GPIO sub-device */
644 	u16 instance;
645 
646 	/* High-level state info */
647 	unsigned long i_flags;          /* global ivtv flags */
648 	u8 is_50hz;                     /* 1 if the current capture standard is 50 Hz */
649 	u8 is_60hz                      /* 1 if the current capture standard is 60 Hz */;
650 	u8 is_out_50hz                  /* 1 if the current TV output standard is 50 Hz */;
651 	u8 is_out_60hz                  /* 1 if the current TV output standard is 60 Hz */;
652 	int output_mode;                /* decoder output mode: NONE, MPG, YUV, UDMA YUV, passthrough */
653 	u32 audio_input;                /* current audio input */
654 	u32 active_input;               /* current video input */
655 	u32 active_output;              /* current video output */
656 	v4l2_std_id std;                /* current capture TV standard */
657 	v4l2_std_id std_out;            /* current TV output standard */
658 	u8 audio_stereo_mode;           /* decoder setting how to handle stereo MPEG audio */
659 	u8 audio_bilingual_mode;        /* decoder setting how to handle bilingual MPEG audio */
660 
661 	/* Locking */
662 	spinlock_t lock;                /* lock access to this struct */
663 	struct mutex serialize_lock;    /* mutex used to serialize open/close/start/stop/ioctl operations */
664 
665 	/* Streams */
666 	int stream_buf_size[IVTV_MAX_STREAMS];          /* stream buffer size */
667 	struct ivtv_stream streams[IVTV_MAX_STREAMS];	/* stream data */
668 	atomic_t capturing;		/* count number of active capture streams */
669 	atomic_t decoding;		/* count number of active decoding streams */
670 
671 	/* ALSA interface for PCM capture stream */
672 	struct snd_ivtv_card *alsa;
673 	void (*pcm_announce_callback)(struct snd_ivtv_card *card, u8 *pcm_data,
674 				      size_t num_bytes);
675 
676 	/* Used for ivtv-alsa module loading */
677 	struct work_struct request_module_wk;
678 
679 	/* Interrupts & DMA */
680 	u32 irqmask;                    /* active interrupts */
681 	u32 irq_rr_idx;                 /* round-robin stream index */
682 	struct kthread_worker irq_worker;		/* kthread worker for PIO/YUV/VBI actions */
683 	struct task_struct *irq_worker_task;		/* task for irq_worker */
684 	struct kthread_work irq_work;	/* kthread work entry */
685 	spinlock_t dma_reg_lock;        /* lock access to DMA engine registers */
686 	int cur_dma_stream;		/* index of current stream doing DMA (-1 if none) */
687 	int cur_pio_stream;		/* index of current stream doing PIO (-1 if none) */
688 	u32 dma_data_req_offset;        /* store offset in decoder memory of current DMA request */
689 	u32 dma_data_req_size;          /* store size of current DMA request */
690 	int dma_retries;                /* current DMA retry attempt */
691 	struct ivtv_user_dma udma;      /* user based DMA for OSD */
692 	struct timer_list dma_timer;    /* timer used to catch unfinished DMAs */
693 	u32 last_vsync_field;           /* last seen vsync field */
694 	wait_queue_head_t dma_waitq;    /* wake up when the current DMA is finished */
695 	wait_queue_head_t eos_waitq;    /* wake up when EOS arrives */
696 	wait_queue_head_t event_waitq;  /* wake up when the next decoder event arrives */
697 	wait_queue_head_t vsync_waitq;  /* wake up when the next decoder vsync arrives */
698 
699 
700 	/* Mailbox */
701 	struct ivtv_mailbox_data enc_mbox;              /* encoder mailboxes */
702 	struct ivtv_mailbox_data dec_mbox;              /* decoder mailboxes */
703 	struct ivtv_api_cache api_cache[256];		/* cached API commands */
704 
705 
706 	/* I2C */
707 	struct i2c_adapter i2c_adap;
708 	struct i2c_algo_bit_data i2c_algo;
709 	struct i2c_client i2c_client;
710 	int i2c_state;                  /* i2c bit state */
711 	struct mutex i2c_bus_lock;      /* lock i2c bus */
712 
713 	struct IR_i2c_init_data ir_i2c_init_data;
714 
715 	/* Program Index information */
716 	u32 pgm_info_offset;            /* start of pgm info in encoder memory */
717 	u32 pgm_info_num;               /* number of elements in the pgm cyclic buffer in encoder memory */
718 	u32 pgm_info_write_idx;         /* last index written by the card that was transferred to pgm_info[] */
719 	u32 pgm_info_read_idx;          /* last index in pgm_info read by the application */
720 	struct v4l2_enc_idx_entry pgm_info[IVTV_MAX_PGM_INDEX]; /* filled from the pgm cyclic buffer on the card */
721 
722 
723 	/* Miscellaneous */
724 	u32 open_id;			/* incremented each time an open occurs, is >= 1 */
725 	int search_pack_header;         /* 1 if ivtv_copy_buf_to_user() is scanning for a pack header (0xba) */
726 	int speed;                      /* current playback speed setting */
727 	u8 speed_mute_audio;            /* 1 if audio should be muted when fast forward */
728 	u64 mpg_data_received;          /* number of bytes received from the MPEG stream */
729 	u64 vbi_data_inserted;          /* number of VBI bytes inserted into the MPEG stream */
730 	u32 last_dec_timing[3];         /* cache last retrieved pts/scr/frame values */
731 	unsigned long dualwatch_jiffies;/* jiffies value of the previous dualwatch check */
732 	u32 dualwatch_stereo_mode;      /* current detected dualwatch stereo mode */
733 
734 
735 	/* VBI state info */
736 	struct vbi_info vbi;            /* VBI-specific data */
737 
738 
739 	/* YUV playback */
740 	struct yuv_playback_info yuv_info;              /* YUV playback data */
741 
742 
743 	/* OSD support */
744 	unsigned long osd_video_pbase;
745 	int osd_global_alpha_state;     /* 1 = global alpha is on */
746 	int osd_local_alpha_state;      /* 1 = local alpha is on */
747 	int osd_chroma_key_state;       /* 1 = chroma-keying is on */
748 	u8  osd_global_alpha;           /* current global alpha */
749 	u32 osd_chroma_key;             /* current chroma key */
750 	struct v4l2_rect osd_rect;      /* current OSD position and size */
751 	struct v4l2_rect main_rect;     /* current Main window position and size */
752 	struct osd_info *osd_info;      /* ivtvfb private OSD info */
753 	void (*ivtvfb_restore)(struct ivtv *itv); /* Used for a warm start */
754 };
755 
to_ivtv(struct v4l2_device * v4l2_dev)756 static inline struct ivtv *to_ivtv(struct v4l2_device *v4l2_dev)
757 {
758 	return container_of(v4l2_dev, struct ivtv, v4l2_dev);
759 }
760 
761 /* ivtv extensions to be loaded */
762 extern int (*ivtv_ext_init)(struct ivtv *);
763 
764 /* Globals */
765 extern int ivtv_first_minor;
766 
767 /*==============Prototypes==================*/
768 
769 /* Hardware/IRQ */
770 void ivtv_set_irq_mask(struct ivtv *itv, u32 mask);
771 void ivtv_clear_irq_mask(struct ivtv *itv, u32 mask);
772 
773 /* try to set output mode, return current mode. */
774 int ivtv_set_output_mode(struct ivtv *itv, int mode);
775 
776 /* return current output stream based on current mode */
777 struct ivtv_stream *ivtv_get_output_stream(struct ivtv *itv);
778 
779 /* Return non-zero if a signal is pending */
780 int ivtv_msleep_timeout(unsigned int msecs, int intr);
781 
782 /* Wait on queue, returns -EINTR if interrupted */
783 int ivtv_waitq(wait_queue_head_t *waitq);
784 
785 /* Read Hauppauge eeprom */
786 struct tveeprom; /* forward reference */
787 void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv);
788 
789 /* First-open initialization: load firmware, init cx25840, etc. */
790 int ivtv_init_on_first_open(struct ivtv *itv);
791 
792 /* Test if the current VBI mode is raw (1) or sliced (0) */
ivtv_raw_vbi(const struct ivtv * itv)793 static inline int ivtv_raw_vbi(const struct ivtv *itv)
794 {
795 	return itv->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE;
796 }
797 
798 /* This is a PCI post thing, where if the pci register is not read, then
799    the write doesn't always take effect right away. By reading back the
800    register any pending PCI writes will be performed (in order), and so
801    you can be sure that the writes are guaranteed to be done.
802 
803    Rarely needed, only in some timing sensitive cases.
804    Apparently if this is not done some motherboards seem
805    to kill the firmware and get into the broken state until computer is
806    rebooted. */
807 #define write_sync(val, reg) \
808 	do { writel(val, reg); readl(reg); } while (0)
809 
810 #define read_reg(reg) readl(itv->reg_mem + (reg))
811 #define write_reg(val, reg) writel(val, itv->reg_mem + (reg))
812 #define write_reg_sync(val, reg) \
813 	do { write_reg(val, reg); read_reg(reg); } while (0)
814 
815 #define read_enc(addr) readl(itv->enc_mem + (u32)(addr))
816 #define write_enc(val, addr) writel(val, itv->enc_mem + (u32)(addr))
817 #define write_enc_sync(val, addr) \
818 	do { write_enc(val, addr); read_enc(addr); } while (0)
819 
820 #define read_dec(addr) readl(itv->dec_mem + (u32)(addr))
821 #define write_dec(val, addr) writel(val, itv->dec_mem + (u32)(addr))
822 #define write_dec_sync(val, addr) \
823 	do { write_dec(val, addr); read_dec(addr); } while (0)
824 
825 /* Call the specified callback for all subdevs matching hw (if 0, then
826    match them all). Ignore any errors. */
827 #define ivtv_call_hw(itv, hw, o, f, args...)				\
828 	v4l2_device_mask_call_all(&(itv)->v4l2_dev, hw, o, f, ##args)
829 
830 #define ivtv_call_all(itv, o, f, args...) ivtv_call_hw(itv, 0, o, f , ##args)
831 
832 /* Call the specified callback for all subdevs matching hw (if 0, then
833    match them all). If the callback returns an error other than 0 or
834    -ENOIOCTLCMD, then return with that error code. */
835 #define ivtv_call_hw_err(itv, hw, o, f, args...)			\
836 	v4l2_device_mask_call_until_err(&(itv)->v4l2_dev, hw, o, f, ##args)
837 
838 #define ivtv_call_all_err(itv, o, f, args...) ivtv_call_hw_err(itv, 0, o, f , ##args)
839 
840 #endif
841