1 /* SPDX-License-Identifier: ISC */
2 /*
3  * Copyright (c) 2004-2011 Atheros Communications Inc.
4  * Copyright (c) 2011-2012 Qualcomm Atheros, Inc.
5  * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl@gmail.com>
6  */
7 
8 #ifndef _SDIO_H_
9 #define _SDIO_H_
10 
11 #define ATH10K_HIF_MBOX_BLOCK_SIZE              256
12 
13 #define ATH10K_SDIO_MAX_BUFFER_SIZE             4096 /*Unsure of this constant*/
14 
15 /* Mailbox address in SDIO address space */
16 #define ATH10K_HIF_MBOX_BASE_ADDR               0x1000
17 #define ATH10K_HIF_MBOX_WIDTH                   0x800
18 
19 #define ATH10K_HIF_MBOX_TOT_WIDTH \
20 	(ATH10K_HIF_MBOX_NUM_MAX * ATH10K_HIF_MBOX_WIDTH)
21 
22 #define ATH10K_HIF_MBOX0_EXT_BASE_ADDR          0x5000
23 #define ATH10K_HIF_MBOX0_EXT_WIDTH              (36 * 1024)
24 #define ATH10K_HIF_MBOX0_EXT_WIDTH_ROME_2_0     (56 * 1024)
25 #define ATH10K_HIF_MBOX1_EXT_WIDTH              (36 * 1024)
26 #define ATH10K_HIF_MBOX_DUMMY_SPACE_SIZE        (2 * 1024)
27 
28 #define ATH10K_HTC_MBOX_MAX_PAYLOAD_LENGTH \
29 	(ATH10K_SDIO_MAX_BUFFER_SIZE - sizeof(struct ath10k_htc_hdr))
30 
31 #define ATH10K_HIF_MBOX_NUM_MAX                 4
32 #define ATH10K_SDIO_BUS_REQUEST_MAX_NUM         1024
33 
34 #define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ)
35 
36 /* HTC runs over mailbox 0 */
37 #define ATH10K_HTC_MAILBOX                      0
38 #define ATH10K_HTC_MAILBOX_MASK                 BIT(ATH10K_HTC_MAILBOX)
39 
40 /* GMBOX addresses */
41 #define ATH10K_HIF_GMBOX_BASE_ADDR              0x7000
42 #define ATH10K_HIF_GMBOX_WIDTH                  0x4000
43 
44 /* Modified versions of the sdio.h macros.
45  * The macros in sdio.h can't be used easily with the FIELD_{PREP|GET}
46  * macros in bitfield.h, so we define our own macros here.
47  */
48 #define ATH10K_SDIO_DRIVE_DTSX_MASK \
49 	(SDIO_DRIVE_DTSx_MASK << SDIO_DRIVE_DTSx_SHIFT)
50 
51 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_B           0
52 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_A           1
53 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_C           2
54 #define ATH10K_SDIO_DRIVE_DTSX_TYPE_D           3
55 
56 /* SDIO CCCR register definitions */
57 #define CCCR_SDIO_IRQ_MODE_REG                  0xF0
58 #define CCCR_SDIO_IRQ_MODE_REG_SDIO3            0x16
59 
60 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_ADDR   0xF2
61 
62 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_A      0x02
63 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_C      0x04
64 #define CCCR_SDIO_DRIVER_STRENGTH_ENABLE_D      0x08
65 
66 #define CCCR_SDIO_ASYNC_INT_DELAY_ADDRESS       0xF0
67 #define CCCR_SDIO_ASYNC_INT_DELAY_MASK          0xC0
68 
69 /* mode to enable special 4-bit interrupt assertion without clock */
70 #define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ            BIT(0)
71 #define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ_SDIO3      BIT(1)
72 
73 #define ATH10K_SDIO_TARGET_DEBUG_INTR_MASK      0x01
74 
75 /* The theoretical maximum number of RX messages that can be fetched
76  * from the mbox interrupt handler in one loop is derived in the following
77  * way:
78  *
79  * Let's assume that each packet in a bundle of the maximum bundle size
80  * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE) has the HTC header bundle count set
81  * to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE).
82  *
83  * in this case the driver must allocate
84  * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2) skb's.
85  */
86 #define ATH10K_SDIO_MAX_RX_MSGS \
87 	(HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2)
88 
89 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL   0x00000868u
90 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF
91 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000
92 
93 enum sdio_mbox_state {
94 	SDIO_MBOX_UNKNOWN_STATE = 0,
95 	SDIO_MBOX_REQUEST_TO_SLEEP_STATE = 1,
96 	SDIO_MBOX_SLEEP_STATE = 2,
97 	SDIO_MBOX_AWAKE_STATE = 3,
98 };
99 
100 #define ATH10K_CIS_READ_WAIT_4_RTC_CYCLE_IN_US	125
101 #define ATH10K_CIS_RTC_STATE_ADDR		0x1138
102 #define ATH10K_CIS_RTC_STATE_ON			0x01
103 #define ATH10K_CIS_XTAL_SETTLE_DURATION_IN_US	1500
104 #define ATH10K_CIS_READ_RETRY			10
105 #define ATH10K_MIN_SLEEP_INACTIVITY_TIME_MS	50
106 
107 /* TODO: remove this and use skb->cb instead, much cleaner approach */
108 struct ath10k_sdio_bus_request {
109 	struct list_head list;
110 
111 	/* sdio address */
112 	u32 address;
113 
114 	struct sk_buff *skb;
115 	enum ath10k_htc_ep_id eid;
116 	int status;
117 	/* Specifies if the current request is an HTC message.
118 	 * If not, the eid is not applicable an the TX completion handler
119 	 * associated with the endpoint will not be invoked.
120 	 */
121 	bool htc_msg;
122 	/* Completion that (if set) will be invoked for non HTC requests
123 	 * (htc_msg == false) when the request has been processed.
124 	 */
125 	struct completion *comp;
126 };
127 
128 struct ath10k_sdio_rx_data {
129 	struct sk_buff *skb;
130 	size_t alloc_len;
131 	size_t act_len;
132 	enum ath10k_htc_ep_id eid;
133 	bool part_of_bundle;
134 	bool last_in_bundle;
135 	bool trailer_only;
136 };
137 
138 struct ath10k_sdio_irq_proc_regs {
139 	u8 host_int_status;
140 	u8 cpu_int_status;
141 	u8 error_int_status;
142 	u8 counter_int_status;
143 	u8 mbox_frame;
144 	u8 rx_lookahead_valid;
145 	u8 host_int_status2;
146 	u8 gmbox_rx_avail;
147 	__le32 rx_lookahead[2 * ATH10K_HIF_MBOX_NUM_MAX];
148 	__le32 int_status_enable;
149 };
150 
151 struct ath10k_sdio_irq_enable_regs {
152 	u8 int_status_en;
153 	u8 cpu_int_status_en;
154 	u8 err_int_status_en;
155 	u8 cntr_int_status_en;
156 };
157 
158 struct ath10k_sdio_irq_data {
159 	/* protects irq_proc_reg and irq_en_reg below.
160 	 * We use a mutex here and not a spinlock since we will have the
161 	 * mutex locked while calling the sdio_memcpy_ functions.
162 	 * These function require non atomic context, and hence, spinlocks
163 	 * can be held while calling these functions.
164 	 */
165 	struct mutex mtx;
166 	struct ath10k_sdio_irq_proc_regs *irq_proc_reg;
167 	struct ath10k_sdio_irq_enable_regs *irq_en_reg;
168 };
169 
170 struct ath10k_mbox_ext_info {
171 	u32 htc_ext_addr;
172 	u32 htc_ext_sz;
173 };
174 
175 struct ath10k_mbox_info {
176 	u32 htc_addr;
177 	struct ath10k_mbox_ext_info ext_info[2];
178 	u32 block_size;
179 	u32 block_mask;
180 	u32 gmbox_addr;
181 	u32 gmbox_sz;
182 };
183 
184 struct ath10k_sdio {
185 	struct sdio_func *func;
186 
187 	struct ath10k_mbox_info mbox_info;
188 	bool swap_mbox;
189 	u32 mbox_addr[ATH10K_HTC_EP_COUNT];
190 	u32 mbox_size[ATH10K_HTC_EP_COUNT];
191 
192 	/* available bus requests */
193 	struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM];
194 	/* free list of bus requests */
195 	struct list_head bus_req_freeq;
196 
197 	struct sk_buff_head rx_head;
198 
199 	/* protects access to bus_req_freeq */
200 	spinlock_t lock;
201 
202 	struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS];
203 	size_t n_rx_pkts;
204 
205 	struct ath10k *ar;
206 	struct ath10k_sdio_irq_data irq_data;
207 
208 	/* temporary buffer for sdio read.
209 	 * It is allocated when probe, and used for receive bundled packets,
210 	 * the read for bundled packets is not parallel, so it does not need
211 	 * protected.
212 	 */
213 	u8 *vsg_buffer;
214 
215 	/* temporary buffer for BMI requests */
216 	u8 *bmi_buf;
217 
218 	bool is_disabled;
219 
220 	struct workqueue_struct *workqueue;
221 	struct work_struct wr_async_work;
222 	struct list_head wr_asyncq;
223 	/* protects access to wr_asyncq */
224 	spinlock_t wr_async_lock;
225 
226 	struct work_struct async_work_rx;
227 	struct timer_list sleep_timer;
228 	enum sdio_mbox_state mbox_state;
229 };
230 
ath10k_sdio_priv(struct ath10k * ar)231 static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar)
232 {
233 	return (struct ath10k_sdio *)ar->drv_priv;
234 }
235 
236 #endif
237