1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef SCSI_TRANSPORT_SAS_H
3 #define SCSI_TRANSPORT_SAS_H
4 
5 #include <linux/transport_class.h>
6 #include <linux/types.h>
7 #include <linux/mutex.h>
8 #include <scsi/sas.h>
9 #include <linux/bsg-lib.h>
10 
11 struct scsi_transport_template;
12 struct sas_rphy;
13 struct request;
14 
15 #if !IS_ENABLED(CONFIG_SCSI_SAS_ATTRS)
scsi_is_sas_rphy(const struct device * sdev)16 static inline int scsi_is_sas_rphy(const struct device *sdev)
17 {
18 	return 0;
19 }
20 #else
21 extern int scsi_is_sas_rphy(const struct device *);
22 #endif
23 
sas_protocol_ata(enum sas_protocol proto)24 static inline int sas_protocol_ata(enum sas_protocol proto)
25 {
26 	return ((proto & SAS_PROTOCOL_SATA) ||
27 		(proto & SAS_PROTOCOL_STP))? 1 : 0;
28 }
29 
30 enum sas_linkrate {
31 	/* These Values are defined in the SAS standard */
32 	SAS_LINK_RATE_UNKNOWN = 0,
33 	SAS_PHY_DISABLED = 1,
34 	SAS_PHY_RESET_PROBLEM = 2,
35 	SAS_SATA_SPINUP_HOLD = 3,
36 	SAS_SATA_PORT_SELECTOR = 4,
37 	SAS_PHY_RESET_IN_PROGRESS = 5,
38 	SAS_LINK_RATE_1_5_GBPS = 8,
39 	SAS_LINK_RATE_G1 = SAS_LINK_RATE_1_5_GBPS,
40 	SAS_LINK_RATE_3_0_GBPS = 9,
41 	SAS_LINK_RATE_G2 = SAS_LINK_RATE_3_0_GBPS,
42 	SAS_LINK_RATE_6_0_GBPS = 10,
43 	SAS_LINK_RATE_12_0_GBPS = 11,
44 	SAS_LINK_RATE_22_5_GBPS = 12,
45 	/* These are virtual to the transport class and may never
46 	 * be signalled normally since the standard defined field
47 	 * is only 4 bits */
48 	SAS_LINK_RATE_FAILED = 0x10,
49 	SAS_PHY_VIRTUAL = 0x11,
50 };
51 
52 struct sas_identify {
53 	enum sas_device_type	device_type;
54 	enum sas_protocol	initiator_port_protocols;
55 	enum sas_protocol	target_port_protocols;
56 	u64			sas_address;
57 	u8			phy_identifier;
58 };
59 
60 struct sas_phy {
61 	struct device		dev;
62 	int			number;
63 	int			enabled;
64 
65 	/* phy identification */
66 	struct sas_identify	identify;
67 
68 	/* phy attributes */
69 	enum sas_linkrate	negotiated_linkrate;
70 	enum sas_linkrate	minimum_linkrate_hw;
71 	enum sas_linkrate	minimum_linkrate;
72 	enum sas_linkrate	maximum_linkrate_hw;
73 	enum sas_linkrate	maximum_linkrate;
74 
75 	/* link error statistics */
76 	u32			invalid_dword_count;
77 	u32			running_disparity_error_count;
78 	u32			loss_of_dword_sync_count;
79 	u32			phy_reset_problem_count;
80 
81 	/* for the list of phys belonging to a port */
82 	struct list_head	port_siblings;
83 
84 	/* available to the lldd */
85 	void			*hostdata;
86 };
87 
88 #define dev_to_phy(d) \
89 	container_of((d), struct sas_phy, dev)
90 #define transport_class_to_phy(dev) \
91 	dev_to_phy((dev)->parent)
92 #define phy_to_shost(phy) \
93 	dev_to_shost((phy)->dev.parent)
94 
95 struct request_queue;
96 struct sas_rphy {
97 	struct device		dev;
98 	struct sas_identify	identify;
99 	struct list_head	list;
100 	struct request_queue	*q;
101 	u32			scsi_target_id;
102 };
103 
104 #define dev_to_rphy(d) \
105 	container_of((d), struct sas_rphy, dev)
106 #define transport_class_to_rphy(dev) \
107 	dev_to_rphy((dev)->parent)
108 #define rphy_to_shost(rphy) \
109 	dev_to_shost((rphy)->dev.parent)
110 #define target_to_rphy(targ) \
111 	dev_to_rphy((targ)->dev.parent)
112 
113 struct sas_end_device {
114 	struct sas_rphy		rphy;
115 	/* flags */
116 	unsigned		ready_led_meaning:1;
117 	unsigned		tlr_supported:1;
118 	unsigned		tlr_enabled:1;
119 	/* parameters */
120 	u16			I_T_nexus_loss_timeout;
121 	u16			initiator_response_timeout;
122 };
123 #define rphy_to_end_device(r) \
124 	container_of((r), struct sas_end_device, rphy)
125 
126 struct sas_expander_device {
127 	int    level;
128 	int    next_port_id;
129 
130 	#define SAS_EXPANDER_VENDOR_ID_LEN	8
131 	char   vendor_id[SAS_EXPANDER_VENDOR_ID_LEN+1];
132 	#define SAS_EXPANDER_PRODUCT_ID_LEN	16
133 	char   product_id[SAS_EXPANDER_PRODUCT_ID_LEN+1];
134 	#define SAS_EXPANDER_PRODUCT_REV_LEN	4
135 	char   product_rev[SAS_EXPANDER_PRODUCT_REV_LEN+1];
136 	#define SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN	8
137 	char   component_vendor_id[SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN+1];
138 	u16    component_id;
139 	u8     component_revision_id;
140 
141 	struct sas_rphy		rphy;
142 
143 };
144 #define rphy_to_expander_device(r) \
145 	container_of((r), struct sas_expander_device, rphy)
146 
147 struct sas_port {
148 	struct device		dev;
149 
150 	int			port_identifier;
151 	int			num_phys;
152 	/* port flags */
153 	unsigned int		is_backlink:1;
154 
155 	/* the other end of the link */
156 	struct sas_rphy		*rphy;
157 
158 	struct mutex		phy_list_mutex;
159 	struct list_head	phy_list;
160 	struct list_head	del_list; /* libsas only */
161 };
162 
163 #define dev_to_sas_port(d) \
164 	container_of((d), struct sas_port, dev)
165 #define transport_class_to_sas_port(dev) \
166 	dev_to_sas_port((dev)->parent)
167 
168 struct sas_phy_linkrates {
169 	enum sas_linkrate maximum_linkrate;
170 	enum sas_linkrate minimum_linkrate;
171 };
172 
173 /* The functions by which the transport class and the driver communicate */
174 struct sas_function_template {
175 	int (*get_linkerrors)(struct sas_phy *);
176 	int (*get_enclosure_identifier)(struct sas_rphy *, u64 *);
177 	int (*get_bay_identifier)(struct sas_rphy *);
178 	int (*phy_reset)(struct sas_phy *, int);
179 	int (*phy_enable)(struct sas_phy *, int);
180 	int (*phy_setup)(struct sas_phy *);
181 	void (*phy_release)(struct sas_phy *);
182 	int (*set_phy_speed)(struct sas_phy *, struct sas_phy_linkrates *);
183 	void (*smp_handler)(struct bsg_job *, struct Scsi_Host *,
184 			struct sas_rphy *);
185 };
186 
187 
188 void sas_remove_children(struct device *);
189 extern void sas_remove_host(struct Scsi_Host *);
190 
191 extern struct sas_phy *sas_phy_alloc(struct device *, int);
192 extern void sas_phy_free(struct sas_phy *);
193 extern int sas_phy_add(struct sas_phy *);
194 extern void sas_phy_delete(struct sas_phy *);
195 extern int scsi_is_sas_phy(const struct device *);
196 
197 u64 sas_get_address(struct scsi_device *);
198 unsigned int sas_tlr_supported(struct scsi_device *);
199 unsigned int sas_is_tlr_enabled(struct scsi_device *);
200 void sas_disable_tlr(struct scsi_device *);
201 void sas_enable_tlr(struct scsi_device *);
202 
203 bool sas_ata_ncq_prio_supported(struct scsi_device *sdev);
204 
205 extern struct sas_rphy *sas_end_device_alloc(struct sas_port *);
206 extern struct sas_rphy *sas_expander_alloc(struct sas_port *, enum sas_device_type);
207 void sas_rphy_free(struct sas_rphy *);
208 extern int sas_rphy_add(struct sas_rphy *);
209 extern void sas_rphy_remove(struct sas_rphy *);
210 extern void sas_rphy_delete(struct sas_rphy *);
211 extern void sas_rphy_unlink(struct sas_rphy *);
212 
213 struct sas_port *sas_port_alloc(struct device *, int);
214 struct sas_port *sas_port_alloc_num(struct device *);
215 int sas_port_add(struct sas_port *);
216 void sas_port_free(struct sas_port *);
217 void sas_port_delete(struct sas_port *);
218 void sas_port_add_phy(struct sas_port *, struct sas_phy *);
219 void sas_port_delete_phy(struct sas_port *, struct sas_phy *);
220 void sas_port_mark_backlink(struct sas_port *);
221 int scsi_is_sas_port(const struct device *);
222 struct sas_phy *sas_port_get_phy(struct sas_port *port);
sas_port_put_phy(struct sas_phy * phy)223 static inline void sas_port_put_phy(struct sas_phy *phy)
224 {
225 	if (phy)
226 		put_device(&phy->dev);
227 }
228 
229 extern struct scsi_transport_template *
230 sas_attach_transport(struct sas_function_template *);
231 extern void sas_release_transport(struct scsi_transport_template *);
232 int sas_read_port_mode_page(struct scsi_device *);
233 
234 static inline int
scsi_is_sas_expander_device(struct device * dev)235 scsi_is_sas_expander_device(struct device *dev)
236 {
237 	struct sas_rphy *rphy;
238 	if (!scsi_is_sas_rphy(dev))
239 		return 0;
240 	rphy = dev_to_rphy(dev);
241 	return rphy->identify.device_type == SAS_FANOUT_EXPANDER_DEVICE ||
242 		rphy->identify.device_type == SAS_EDGE_EXPANDER_DEVICE;
243 }
244 
245 #define scsi_is_sas_phy_local(phy)	scsi_is_host_device((phy)->dev.parent)
246 
247 #endif /* SCSI_TRANSPORT_SAS_H */
248